Study guide

12.3 TQM, Six Sigma, Lean & Continuous Improvement Methods

ISM CPSM Exam 2 — Supply Management Integration Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Category Management Strategy & Spend Analysis

1.1 Category Strategy Development & Stakeholder Alignment 1.2 Spend Analysis, Data Categorization & Spend Trees 1.3 Supply Market Intelligence & Porter's Five Forces 1.4 Category Segmentation & Kraljic Portfolio Matrix

2 Chapter 2: Strategic Sourcing Waves & Supplier Relationship Management

2.1 7-Step Sourcing Wave Execution & RFx Process 2.2 Total Cost of Ownership (TCO) & Landed Cost Modeling 2.3 Supplier Evaluation, Weighted Scoring & Award Strategy 2.4 Supplier Relationship Management (SRM) & KPI Scorecards

3 Chapter 3: Supply Chain Network Strategy & Resilience

3.1 Supply Chain Network Design & Facility Location 3.2 Make-or-Buy & Insourcing vs Outsourcing Analysis 3.3 Supply Chain Risk Management, Resilience & Continuity 3.4 Sustainable, Ethical & Diverse Supply Chain Integration 3.5 Global Sourcing Footprint, Regionalization & Trade-Policy Strategy

4 Chapter 4: Supply Chain Strategy & Digital Transformation

4.1 Functional Alignment, SCOR Model & Value Chain Strategy 4.2 Agile vs Lean Supply Chains & Postponement Strategies 4.3 Digital Supply Chain Systems: ERP, WMS, TMS & AI

5 Chapter 5: Logistics & Transportation Management

5.1 Transportation Modes, Selection Analysis & Trade-offs 5.2 Freight Rating, Carrier Contracting & 3PL/4PL Management 5.3 Incoterms® 2020 Rules, Customs & Global Trade Compliance 5.4 Logistics Fundamentals, Customer Service & Total Logistics Cost 5.5 International Freight Operations: Ocean, Air, Intermodal & Forwarders 5.6 Export Controls, Trade Security Programs & Shipping Documentation

6 Chapter 6: Warehousing, Distribution & Reverse Logistics

6.1 Warehouse Operations, Layout & Slotting Optimization 6.2 Distribution Network Models, Cross-Docking & Hubs 6.3 Reverse Logistics, Remanufacturing & Circular Supply Chains 6.4 Materials Handling, Packaging & Unitization 6.5 Warehouse & Logistics Technology: WMS, TMS, Auto-ID & Automation 6.6 Logistics Performance Measurement, KPIs & Carrier Scorecards

7 Chapter 7: Demand Forecasting & Sales and Operations Planning (S&OP)

7.1 Demand Forecasting Principles & Quantitative Models 7.2 Sales and Operations Planning (S&OP) & CPFR 7.3 Demand Management, Volatility & Bullwhip Effect Mitigation 7.4 Aggregate Planning, Capacity Balancing & Master Scheduling

8 Chapter 8: Inventory Management & Control Policy

8.1 Inventory Types, Carrying Costs & Working Capital 8.2 Inventory Control Models: EOQ, Reorder Point & Safety Stock 8.3 ABC Analysis, VMI, Consignment Inventory & JIT Systems 8.4 MRP, Bills of Material & Distribution Requirements Planning 8.5 Inventory Positioning, Risk Pooling & Multi-Echelon Policy 8.6 Inventory Record Accuracy, Cycle Counting & Excess Disposition

9 Chapter 9: Project Management Integration & Governance

9.1 Project Charter, Scope Management & Work Breakdown Structure 9.2 Project Scheduling, Critical Path Method (CPM) & PERT 9.3 Project Risk Management, Earned Value Management (EVM) & RACI

10 Chapter 10: Forecasting Methods, Models & Accuracy

10.1 Forecast Horizons, Hierarchy & the Aggregation Principle 10.2 Seasonality, Decomposition & Seasonal Index Forecasting 10.3 Applied Causal Forecasting: Regression, Correlation & Leading Indicators 10.4 Managing Forecast Accuracy: Bias, Weighted Error & Forecast Value Added 10.5 Demand Sensing, Downstream Data & Machine-Learning Forecasting 10.6 New-Product Forecasting: Analogs, Attributes & Diffusion Models 10.7 Supply-Side Forecasting: Lead Time, Commodity Price & Capacity

11 Chapter 11: Product & Service Development in S&OP

11.1 New Product & Service Development and the Stage-Gate Process 11.2 Early Supplier Involvement, Co-Design & Supplier-Led Innovation 11.3 Specifications, Statements of Work & Standardization 11.4 Value Analysis, Value Engineering & Design for Manufacturability 11.5 Product Life Cycle, Phase-In/Phase-Out & Obsolescence Management

12 Chapter 12: Quality Management & Continuous Improvement

12.1 Quality Fundamentals, Cost of Quality & the Quality Philosophies 12.2 Quality Management Systems, ISO Standards & Registration 12.3 TQM, Six Sigma, Lean & Continuous Improvement Methods 12.4 Statistical Process Control, Process Capability & Acceptance Sampling 12.5 Supplier Quality Management, Certification Levels & the Quality Tools

12.3 TQM, Six Sigma, Lean & Continuous Improvement Methods

Key Takeaways Explain This Topic AI

Six Sigma capability means 3.4 defects per million opportunities (DPMO), which reflects a 6-sigma process allowing for the conventional 1.5-sigma long-term process shift.

DMAIC (Define, Measure, Analyze, Improve, Control) improves an existing process; DMADV or DFSS (Define, Measure, Analyze, Design, Verify) designs a new one.

Lean attacks waste and flow while Six Sigma attacks variation and defects — Lean Six Sigma combines both, and the exam expects you to pick the right tool for the stated problem.

The eight lean wastes are captured by DOWNTIME: Defects, Overproduction, Waiting, Non-utilized talent, Transportation, Inventory, Motion, Excess processing.

Kaizen is small continuous incremental improvement by the people who do the work; kaikaku or reengineering is radical discontinuous redesign.

Last updated: August 2026

TQM, Six Sigma, Lean & Continuous Improvement Methods

Exam 2 asks you to match the methodology to the problem . A scenario describing wildly inconsistent output from a stable process points to Six Sigma. A scenario describing long lead times, bloated work-in-process, and material travelling four miles inside a plant points to Lean. A scenario describing a single escaped defect at a supplier points to 8D and a supplier corrective action request. Learning the vocabulary alone is not enough; learn the diagnosis.

Total Quality Management (TQM)

TQM is an organization-wide management philosophy in which every function and every employee is accountable for continuously improving quality as defined by the customer. Its pillars:

Customer focus — the customer, internal or external, defines quality.

Total employee involvement — quality circles, empowered teams, suggestion systems.

Process-centred thinking — improve the process, not the individual.

Integrated system — quality is embedded across functions, including supply management.

Strategic and systematic approach — quality objectives cascade from strategy.

Continual improvement — PDCA operating permanently.

Fact-based decision making — measurement, not opinion.

Communication — sustained, two-way, including with suppliers.

TQM's engine is the PDCA / Plan-Do-Check-Act (Deming or Shewhart) cycle : plan a change, run it on a small scale, check results against the prediction, then act by standardizing the gain or re-planning. Many organizations use the variant PDSA (Plan-Do-Study-Act).

Six Sigma

Six Sigma is a data-driven methodology that reduces variation and eliminates defects by managing process capability statistically. Its target is a process so capable that specification limits sit six standard deviations from the process mean.

Sigma Levels and DPMO

Because processes drift over time, the Six Sigma convention allows a 1.5-sigma long-term shift in the mean. This is why the headline figure is 3.4 defects per million opportunities rather than the 2 parts per billion a perfectly centred 6-sigma process would produce.

  • Sigma Level DPMO (with 1.5σ shift) Yield Practical meaning
  • 2σ 308,537 69.15% Not competitive
  • 3σ 66,807 93.32% Typical of an unimproved process
  • 4σ 6,210 99.379% Industry average for many sectors
  • 5σ 233 99.977% Best in class
  • 6σ 3.4 99.99966% World class

DPMO Calculation DPMO = Number of Defects Units × Opportunities per Unit × 1,000,000 \text{DPMO} = \frac{\text{Number of Defects}}{\text{Units} \times \text{Opportunities per Unit}} \times 1{,}000{,}000 DPMO = Units × Opportunities per Unit Number of Defects ​ × 1 , 000 , 000

Worked example. A supplier ships 12,000 printed circuit assemblies. Each assembly has 250 solder joints, and each joint is one opportunity for a defect. Incoming inspection and field returns identify 63 defective joints in total.

Total opportunities = 12,000 × 250 = 3,000,000 12{,}000 \times 250 = 3{,}000{,}000 12 , 000 × 250 = 3 , 000 , 000

DPMO = 63 3,000,000 × 1,000,000 = 21 DPMO \text{DPMO} = \frac{63}{3{,}000{,}000} \times 1{,}000{,}000 = \mathbf{21\ \text{DPMO}} DPMO = 3 , 000 , 000 63 ​ × 1 , 000 , 000 = 21 DPMO

Reading the table, 21 DPMO sits between the 5σ (233 DPMO) and 6σ (3.4 DPMO) rows — roughly 5.5 sigma , an excellent supplier.

Exam trap: defects per unit is not defects per million opportunities . Here defects per unit is 63 / 12,000 = 0.00525 63 / 12{,}000 = 0.00525 63/12 , 000 = 0.00525 , and defective units would be a third figure again. Read which denominator the item asks for.

The Two Six Sigma Roadmaps

Roadmap Use when Phases

DMAIC Improving an existing process that underperforms D efine the problem and CTQs, M easure baseline performance, A nalyze root causes, I mprove by testing solutions, C ontrol with control plans and charts

DMADV / DFSS Designing a new process, product, or service where none exists D efine, M easure customer needs, A nalyze design concepts, D esign detail, V erify performance

Belt hierarchy: Yellow Belt (awareness and team participation), Green Belt (leads projects part-time), Black Belt (full-time project leader and coach), Master Black Belt (trains Black Belts and manages the program), Champion or Sponsor (executive who removes barriers and owns the business case).

Critical to Quality (CTQ) characteristics translate the Voice of the Customer into measurable, specification-bearing attributes — the bridge between a customer complaint and a control chart.

Lean

Lean originates in the Toyota Production System and targets waste (muda) and flow . Its five principles: specify value from the customer's viewpoint, map the value stream , create flow , establish pull , and pursue perfection .

The Eight Wastes — DOWNTIME

  • Letter Waste Supply chain example
  • D Defects Rework of miscoded receipts; rejected supplier lots
  • O Overproduction Building to forecast rather than to demand signal
  • W Waiting Trucks idling at a dock; approvals stalled in a requisition queue
  • N Non-utilized talent Buyers doing manual data entry instead of category strategy
  • T Transportation Unnecessary inter-facility material moves
  • I Inventory Safety stock masking supplier unreliability
  • M Motion Pickers walking excessive distances due to poor slotting
  • E Excess processing Triple approval on a $50 requisition; over-tolerancing a part
  • Core Lean Tools

Value Stream Mapping (VSM): maps material and information flow end to end, separating value-added time from total lead time. The headline metric is process cycle efficiency = value-added time ÷ total lead time.

5S: Sort, Set in order, Shine, Standardize, Sustain — workplace organization.

Kanban: visual pull signal authorizing replenishment only on consumption.

Poka-yoke: mistake-proofing so the error becomes physically impossible.

SMED (single-minute exchange of die): setup reduction that makes small lots economic and therefore shrinks EOQ.

Jidoka: automation with a human touch — the process stops itself when an abnormality occurs.

Heijunka: production levelling to smooth volume and mix.

Takt time: available production time ÷ customer demand, the drumbeat the line must match.

Lean vs. Six Sigma

  • Dimension Lean Six Sigma
  • Primary enemy Waste and delay Variation and defects
  • Primary metric Lead time, flow, inventory turns Sigma level, DPMO, Cpk
  • Typical tools VSM, 5S, kanban, SMED DMAIC, SPC, DOE, hypothesis testing
  • Typical output Faster, leaner process More consistent, more capable process

Lean Six Sigma merges them: use lean to remove waste and shorten the value stream, then use Six Sigma to stabilize and centre what remains.

Kaizen vs. Reengineering

Kaizen — continuous, incremental, low-cost improvement driven by the people who perform the work. A kaizen event or blitz is a focused three-to-five-day cross-functional workshop targeting one process.

Kaikaku / Business Process Reengineering — radical, discontinuous redesign of a process from a blank sheet, usually enabled by technology and carrying far higher cost and risk.

Exam scenarios that describe modest budget, engaged frontline staff, and an incremental target want kaizen. Scenarios describing a process that is fundamentally obsolete want reengineering.

8D Problem Solving — the Supplier Corrective Action Discipline

When a supplier ships a nonconformance, the standard structured response is 8D , and Exam 2 tests it directly:

  • Step Action
  • D1 Form the cross-functional team
  • D2 Describe the problem with data (what, where, when, how many)
  • D3 Implement and verify interim containment to protect the customer
  • D4 Identify and verify the root cause and the escape point
  • D5 Choose and verify permanent corrective actions
  • D6 Implement and validate permanent corrective actions
  • D7 Prevent recurrence — update control plans, FMEAs, procedures, and read across to similar parts
  • D8 Recognize the team and close the report

Exam trap: containment (D3) is not a corrective action. An item describing a supplier who "sorted the suspect lot and shipped good parts" has completed D3 only. Until root cause is verified at D4 and systemic prevention is applied at D7, the corrective action request must stay open.

Loading diagram... Choosing the Right Improvement Methodology