Study guide
17.4 Process Capability Metrics & Outliers
ASQ Certified Quality Auditor CQA
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
0.1 Current Exam Facts 0.2 Eligibility, Fees & Recertification 0.3 Case Studies & Study Strategy
2 Chapter 1: Types of Quality Audits
1.1 Product, Process, System, Hybrid & Remote Audits 1.2 First-, Second- & Third-Party Context 1.3 CAPA Verification, Risk-Based, Surveillance & For-Cause 1.4 Common Elements with Sustainability, EHS & Financial Audits
3 Chapter 2: Purpose, Scope & Audit Criteria
2.1 Elements of Purpose and Scope 2.2 Benefits of Audits (Effectiveness, Risk, Cyber) 2.3 Criteria: Standards, Contracts, Specs & QMS
4 Chapter 3: Roles, Ethics & Audit Credibility
3.1 Roles: Lead Auditor, Team, Client, Auditee, Observer 3.2 ASQ Code of Ethics, Due Care & Confidentiality 3.3 Legal Consequences of Improper Auditor Actions 3.4 Independence, Objectivity & Qualifications
5 Chapter 4: Audit Planning Fundamentals
4.1 Elements of the Audit Planning Process 4.2 Auditor Selection Criteria 4.3 Pre-Audit Documentation & Gap Assessments 4.4 Logistics: Safety, Escorts, Access & PPE
6 Chapter 5: Auditing Tools, Strategies & the Audit Plan
5.1 Sampling Plans, Checklists & Working Papers 5.2 Forward/Backward Tracing, Discovery & Observation 5.3 Creating and Distributing the Audit Plan
7 Chapter 6: Audit Performance Management
6.1 On-Site Management for the Auditor 6.2 On-Site Management for the Auditee 6.3 Opening Meeting
8 Chapter 7: Evidence Collection & Closing Meetings
7.1 Audit Data Collection and Analysis 7.2 Characteristics of Objective Evidence 7.3 Organizing Evidence by Risk and Significance 7.4 Exit and Closing Meetings
9 Chapter 8: Audit Reporting
8.1 Report Development and Content 8.2 Effective Reports: Summary, Findings & OFIs 8.3 Approvals, Distribution & Audit File Retention
10 Chapter 9: CAPA Follow-Up & Audit Closure
9.1 CAPA Process Elements & Root Cause 9.2 Reviewing and Negotiating CAPA Plans 9.3 Verifying CAPA Effectiveness 9.4 Ineffective CAPA Escalation & Audit Closure
11 Chapter 10: Auditor Characteristics, Resources & Conflict
10.1 Auditor and Lead Auditor Characteristics 10.2 On-Site Audit Resource Management 10.3 Conflict Resolution Techniques
12 Chapter 11: Communication, Interviewing & Team Dynamics
11.1 Communication and Presentation Techniques 11.2 Interviewing Techniques 11.3 Team Building, Facilitation & Development Stages
13 Chapter 12: Audit Program Management Core
12.1 Senior Management Support for the Audit Function 12.2 Staffing and Resource Management 12.3 Auditor Training and Development 12.4 Audit Program Evaluation Metrics
14 Chapter 13: Internal & External Audit Programs
13.1 Internal Audit Program Management 13.2 External / Supplier Audit Program Management 13.3 Standardizing Best Practices from Audit Results
15 Chapter 14: Risk, Management Review & Electronic Systems
14.1 Organizational Risk Management & Continuity 14.2 Management Review Input from the Audit Program 14.3 Electronic Records, Data Integrity & Cybersecurity
16 Chapter 15: Business & Financial Impact of Auditing
15.1 Auditing as a Management Tool 15.2 Interrelationships of Business Processes 15.3 Cost of Quality Principles
17 Chapter 16: Quality Tools & Process Improvement
16.1 Seven Basic Tools, Root Cause & PDCA 16.2 Six Sigma DMAIC for Auditors 16.3 Lean Principles and Tools
18 Chapter 17: Statistics & Process Variation
17.1 Mean, Median & Mode 17.2 Dispersion & Qualitative vs Quantitative Analysis 17.3 Common Cause vs Special Cause Variation 17.4 Process Capability Metrics & Outliers
19 Chapter 18: Sampling, Change Control, V&V & Risk Tools
18.1 Acceptance Sampling & Sampling Types (incl. MSA) 18.2 Consumer Risk, Producer Risk & Confidence 18.3 Change Control, Configuration Management, V&V 18.4 FMEA, HACCP, CTQ & SWOT
17.4 Process Capability Metrics & Outliers
Key Takeaways Explain This Topic AI
Cp measures potential capability from process spread vs. tolerance and ignores centering; Cpk measures actual capability including location relative to the nearest specification.
Valid capability analysis requires a stable process, correct specifications, adequate data, and a distribution (often approximate normality) that matches the index assumptions—or an appropriate alternative method.
Cpk < 1 generally indicates the process is not meeting specs consistently; higher values (e.g., ≥1.33) are common industry targets but customer/regulatory requirements govern.
Outliers are observations unusually far from the bulk of the data; they can be special causes, data errors, or extreme common-cause tails—and they strongly affect mean, SD, and capability.
Auditors should verify how outliers were identified (charts, residual rules, domain review), whether they were investigated, and whether exclusion from analysis was justified and documented.
Last updated: August 2026
17.4 Process Capability Metrics & Outliers
Quick Answer: Cp = (USL − LSL) / (6σ) measures spread only (potential capability). Cpk = min[(USL − μ)/(3σ), (μ − LSL)/(3σ)] measures spread and centering (actual capability vs. nearest spec). Use capability only on stable processes with correct specs and suitable distribution assumptions. Outliers are extreme points that need investigation—not automatic deletion. BoK V.D.2–3 . Practice at /practice/cqa .
What “capability” means
Process capability describes how well a stable process’s natural variation and location fit within specification limits for a characteristic. It is not the same as:
- Control (stability vs. control limits—voice of the process)
- Performance sometimes labeled Pp/Ppk (often using overall long-term σ including all sources)
- Customer satisfaction (broader than one CTQ index)
Auditors meet capability claims in validation reports, supplier scorecards, PPAP/FAI packages, and management reviews. Your job is to understand the metrics and apply skepticism: correct formula, correct inputs, correct assumptions.
Specifications and process parameters
- Symbol Meaning
- LSL / USL Lower / upper specification limits (customer or design)
- Tolerance width USL − LSL (two-sided)
- μ or x ˉ \bar{x} x ˉ Process mean (population or sample estimate)
- σ or s Process standard deviation (definition depends on method)
- Target T Preferred value (may equal midpoint; not always)
Critical audit check: Are LSL/USL the current approved limits for this product/revision? Many “incapable” or “capable” stories use obsolete drawings.
Cp — potential capability (spread only)
For a two-sided specification and a process spread taken as 6σ (common normal-based model spanning roughly ±3σ):
C p = U S L − L S L 6 σ C_p = \dfrac{USL - LSL}{6\sigma} C p = 6 σ U S L − L S L
Cp asks: If the process were perfectly centered , would the spread fit the tolerance?
Cp does not detect off-center processes. A process can have high Cp and still produce massive defects if mean sits near one limit.
- Worked mini-calculation — Cp
- USL = 20.0, LSL = 10.0, σ = 1.0
- Tolerance = 10.0
- 6σ = 6.0
- Cp = 10 / 6 ≈ 1.67
That looks strong—but only if the mean is near the center. If mean = 18 with the same σ, defects explode near the USL even though Cp is unchanged.
Cpk — actual capability (spread + centering)
C p k = min ( U S L − μ 3 σ , μ − L S L 3 σ ) C_{pk} = \min\left(\dfrac{USL - \mu}{3\sigma},\ \dfrac{\mu - LSL}{3\sigma}\right) C p k = min ( 3 σ U S L − μ , 3 σ μ − L S L )
- Uses the nearest specification
- Falls when the process is off-center or when σ is large
- For a centered process, Cpk ≈ Cp; when off-center, Cpk < Cp
- Worked mini-calculation — Cpk
- USL = 20, LSL = 10, μ = 16, σ = 1.0
- (USL − μ)/(3σ) = (20 − 16)/3 = 4/3 ≈ 1.33
- (μ − LSL)/(3σ) = (16 − 10)/3 = 6/3 = 2.00
- Cpk = min(1.33, 2.00) = 1.33
- Cp was 10/(6) ≈ 1.67 → Cpk < Cp shows centering loss
- Second worked example — incapable centering
- USL = 10.50, LSL = 9.50, μ = 10.40, σ = 0.10
- Cp = (1.00)/(0.60) ≈ 1.67
- (USL − μ)/(3σ) = 0.10 / 0.30 ≈ 0.33
- (μ − LSL)/(3σ) = 0.90 / 0.30 = 3.00
Cpk ≈ 0.33 → process looks “capable” by Cp but is badly off-center ; audit must challenge any claim based on Cp alone.
Interpreting magnitude (rules of thumb)
Targets vary by industry and customer. Common teaching benchmarks (not universal law):
- Cpk (approx.) Rough interpretation
- < 1.0 Process spread/location not fitting specs; nonconformances expected
- ≈ 1.0 Marginal; about ±3σ at the nearer limit if normal and stable
- ≥ 1.33 Common many-industry minimum for ongoing production
- ≥ 1.67 Stronger target in some automotive/high-reliability contexts
- ≥ 2.0 Associated with “6σ” style short-term thinking in some curricula
Auditor stance: Compare claims to contractual/customer requirements and to stability evidence , not only to a memorized number.
- Prerequisites for valid capability (Understand/Apply)
- Statistical stability — process in control; special causes addressed
- Correct specs — current, applicable, same units
- Representative data — right product, period, sampling plan
- Measurement system adequacy — high measurement error inflates apparent σ and tanks Cpk
Distribution fit — normal-based Cp/Cpk mislead for strongly skewed data; may need transform, non-normal indices, or percent nonconforming methods
σ definition clarity — within-subgroup vs. overall (Cp/Cpk vs. Pp/Ppk distinctions in many Six Sigma contexts)
If any prerequisite fails, treat published indices as claims needing validation , not as facts.
Centering vs. spread — improvement strategy
- Diagnosis Evidence Typical improvement direction
- Wide spread, well centered Cp and Cpk both low, similar Reduce variation (method, equipment, materials)
- Tight spread, off-center Cp high, Cpk much lower Center the mean (setup, target, bias)
- Both problems Cp low, Cpk even lower Reduce variation and center
- Unstable Chart out of control Restore control before capability projects
This table is pure audit gold: it connects metrics to correct CAPA/system projects .
Outliers — definition and impact
An outlier is an observation unusually distant from the bulk of the data—far in the tail relative to the rest of the sample or to a fitted model.
Impacts:
- Pulls the mean toward the extreme
- Inflates range, variance, and SD
- Can crash Cpk (or, if wrongly deleted, inflate Cpk unrealistically)
- May be the most important signal (special cause, safety event) or a clerical error (extra zero typed)
- Identification methods (common)
- Method Idea Caveat
- Visual Histogram, box plot, time-series plot Subjective alone
- Control chart Point beyond limits / pattern rules Needs proper limits
- z-score / residual e.g., |z| > 3 under a normal model Model-dependent
- IQR rule < Q1 − 1.5·IQR or > Q3 + 1.5·IQR Sensitive to distribution; screening only
- Domain review Impossible physically? Wrong unit? Always required before deletion
Never delete outliers solely to improve a customer scorecard. Document investigation: root cause, data error correction, or retained extreme with analysis that includes it (or uses robust methods).
Worked outlier impact sketch
Data: 10.0, 10.1, 9.9, 10.0, 10.2, and 14.0 (possible bad reading).
- With 14.0: mean jumps, s inflates, Cpk collapses
- Investigation finds a decimal error; true value 10.4 → correct the record
Investigation finds a real process excursion → treat as special cause , contain product, fix cause; do not silently drop the point and claim high Cpk for the period without disclosure
- Auditor checklist for capability & outliers
- Request control chart evidence for the capability period
- Verify LSL/USL/revision and characteristic definition
- Confirm σ method and software settings
- Compare Cp vs. Cpk to diagnose centering vs. spread
- Ask how outliers were detected, investigated, and treated
- Cross-check with actual nonconformance rates —huge mismatch suggests bad assumptions or sorting
- Align findings with system improvement (common cause / low Cpk) vs. event CAPA (outlier special cause)
- Common exam traps
- Using Cp when the process is off-center (Cp looks fine; Cpk does not)
- Computing capability on unstable data
- Confusing control limits with specification limits
- Treating outlier deletion as routine “data cleaning” without cause
- Assuming Cpk ≥ 1.33 is a universal legal requirement
- Ignoring measurement system error as a driver of poor Cpk
- Chapter close
Chapter 17 built the auditor’s statistical core: center (mean/median/mode), spread and qualitative/quantitative patterns , common vs. special cause , and capability/outliers . Domain V continues with sampling, change control, V&V, and risk tools. Keep drilling application scenarios at /practice/cqa and the full study path at /study-guides/cqa .