Study guide

4.7 Measurement System Analysis (MSA)

Certified Quality Engineer CQE

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Management and Leadership

1.1 Quality Philosophies & Foundations 1.2 Leadership & Organizational Systems 1.3 ASQ Code of Ethics & Professional Standards 1.4 Strategic Planning & Deployment 1.5 Management Infrastructure & Project Management 1.6 Quality Information Systems & Communication 1.7 Financial & Cost of Quality

2 Chapter 2: The Quality System

2.1 Quality Management System Elements & Standards 2.2 Quality Documentation Architecture 2.3 Quality Auditing Principles & Types 2.4 Audit Planning, Execution & Reporting 2.5 Corrective Action & Preventive Action Systems 2.6 Supplier Quality Management 2.7 Customer Relations & Customer Value 2.8 Quality Training Program Design & Effectiveness

3 Chapter 3: Product, Process, and Service Design

3.1 Design Input & Requirements 3.2 Design Review & Verification 3.3 Failure Mode and Effects Analysis 3.4 Design of Experiments Foundations 3.5 Robust Design & Taguchi Methods 3.6 Reliability & Maintainability Concepts 3.7 Reliability Modeling & System Evaluation 3.8 Technical Drawings, Specifications & GD&T

4 Chapter 4: Product and Process Control

4.1 Statistical Process Control Principles 4.2 Variable Control Charts 4.3 Attribute Control Charts 4.4 Process Capability & Performance Analysis 4.5 Acceptance Sampling Plans & Standards 4.6 Metrology, Calibration & Measurement Uncertainty 4.7 Measurement System Analysis (MSA) 4.8 Material Control, Traceability & MRB

5 Chapter 5: Continuous Improvement

5.1 Continuous Improvement Methodologies 5.2 Classic Quality Tools 5.3 Management & Planning Tools 5.4 Lean Tools & Waste Elimination 5.5 Problem-Solving Methodologies & Root Cause Analysis 5.6 Risk Management & Assessment 5.7 Change Management & Team Facilitation

6 Chapter 6: Quantitative Methods and Tools

6.1 Descriptive Statistics & Data Summarization 6.2 Probability Concepts & Distributions 6.3 Sampling Distributions & Central Limit Theorem 6.4 Point & Interval Estimation 6.5 Hypothesis Testing Fundamentals 6.6 Specific Statistical Tests 6.7 Regression & Correlation Analysis

7 Chapter 7: Risk Management & Advanced Quality Engineering

7.1 Risk Identification & Hazard Analysis 7.2 Quantitative Risk Analysis & Modeling 7.3 Risk Mitigation & Control Planning 7.4 Special Process Control & Advanced SPC 7.5 Advanced Statistical Design & Analysis 7.6 Computer Applications & Quality Engineering Software

4.7 Measurement System Analysis (MSA)

Key Takeaways Explain This Topic AI

Variable Gage R&R separates measurement system variation into Equipment Variation (EV, Repeatability) and Appraiser Variation (AV, Reproducibility), combining them as GRR = sqrt(EV^2 + AV^2).

According to AIAG guidelines, a measurement system is acceptable if %GRR < 10%, conditionally acceptable between 10% and 30%, and unacceptable if %GRR > 30% relative to total process variation or tolerance.

ANOVA is superior to the X-bar/R method for Gage R&R because ANOVA isolates Part-by-Operator interaction effects and provides unbiased variance component estimates.

The Number of Distinct Categories (ndc) quantifies measurement resolution relative to process spread, requiring ndc >= 5 (calculated as floor(1.41 * PV / GRR)) to reliably detect process variation.

Attribute Agreement Analysis evaluates categorical inspection consistency using Cohen's Kappa (kappa), where kappa > 0.75 indicates good-to-excellent agreement beyond chance and overall inspector accuracy should exceed 90-95%.

Last updated: July 2026

Loading diagram... Total Measurement System Variation Tree

4.7 Measurement System Analysis (MSA)

Measurement System Analysis (MSA) is an experimental and mathematical procedure used to quantify the variation contributed by a measurement process to the overall observed process variation. If a measurement system is noisy or biased, good product may be scrapped (Producer's Risk) or bad product shipped (Consumer's Risk).

Components of Total Observed Variation

The total observed variation ( σ T o t a l 2 \sigma^2_{Total} σ T o t a l 2 ​ ) in any production dataset is the sum of actual part-to-part process variance ( σ P V 2 \sigma^2_{PV} σ P V 2 ​ ) and measurement system variance ( σ G R R 2 \sigma^2_{GRR} σ GRR 2 ​ ): σ T o t a l 2 = σ P V 2 + σ G R R 2 = σ P V 2 + σ E V 2 + σ A V 2 \sigma^2_{Total} = \sigma^2_{PV} + \sigma^2_{GRR} = \sigma^2_{PV} + \sigma^2_{EV} + \sigma^2_{AV} σ T o t a l 2 ​ = σ P V 2 ​ + σ GRR 2 ​ = σ P V 2 ​ + σ E V 2 ​ + σ A V 2 ​

Repeatability (Equipment Variation, EV): The variance observed when one appraiser uses the same instrument to measure the same part repeatedly under identical conditions.

Reproducibility (Appraiser Variation, AV): The variance in the average of measurements made by different appraisers using the same instrument measuring the same parts .

Gage Repeatability & Reproducibility ( G R R GRR GRR ): The combined standard deviation of Repeatability and Reproducibility: G R R = E V 2 + A V 2 GRR = \sqrt{EV^2 + AV^2} GRR = E V 2 + A V 2 ​

Variable Gage R&R: ANOVA vs. X-bar & R Method

Two principal methodologies are used to conduct variable Gage R&R studies (typically employing a = 3 a = 3 a = 3 operators, n = 10 n = 10 n = 10 representative process parts, and r = 3 r = 3 r = 3 trials per part):

Feature Average & Range Method ( X ˉ & R \bar{X} \& R X ˉ & R ) Analysis of Variance Method (ANOVA)

Mathematical Basis Range constants ( d 2 ∗ d_2^* d 2 ∗ ​ , K 1 , K 2 , K 3 K_1, K_2, K_3 K 1 ​ , K 2 ​ , K 3 ​ ) approximations Sum of Squares ( S S SS SS ) & Variance Component Decomposition

Operator-Part Interaction Cannot isolate interaction between operator and part Isolates & quantifies Operator × \times × Part interaction

  • Variance Estimation Slightly biased due to range approximations Unbiased minimum-variance estimates
  • Industry Standard Legacy quick method Preferred modern standard (AIAG 4th Edition)
  • Formulas for Range Method (6-Sigma / 5.15-Sigma Spread)

Under AIAG 4th Edition ( 6 σ 6\sigma 6 σ spread multiplier):

Equipment Variation (Repeatability): E V = 6 ⋅ σ E V = 6 ⋅ ( R ˉ ˉ d 2 ∗ ) = K 1 ⋅ R ˉ ˉ EV = 6 \cdot \sigma_{EV} = 6 \cdot \left(\frac{\bar{\bar{R}}}{d_2^*}\right) = K_1 \cdot \bar{\bar{R}} E V = 6 ⋅ σ E V ​ = 6 ⋅ ( d 2 ∗ ​ R ˉ ˉ ​ ) = K 1 ​ ⋅ R ˉ ˉ

Appraiser Variation (Reproducibility): A V = ( K 2 ⋅ X ˉ d i f f ) 2 − E V 2 n ⋅ r AV = \sqrt{(K_2 \cdot \bar{X}_{diff})^2 - \frac{EV^2}{n \cdot r}} A V = ( K 2 ​ ⋅ X ˉ d i ff ​ ) 2 − n ⋅ r E V 2 ​ ​ (If the quantity under the radical is negative, A V AV A V is set to 0)

  • Part-to-Part Variation: P V = K 3 ⋅ R p PV = K_3 \cdot R_p P V = K 3 ​ ⋅ R p ​
  • Total Variation: T V = G R R 2 + P V 2 TV = \sqrt{GRR^2 + PV^2} T V = GR R 2 + P V 2 ​
  • AIAG Acceptance Criteria & %GRR

The performance of a measurement system is evaluated using Percent Gage R&R (%GRR) , calculated either relative to Total Variation ( T V TV T V ) or Specification Tolerance ( T o l e r a n c e = U S L − L S L Tolerance = USL - LSL T o l er an ce = U S L − L S L ): % G R R T V = ( σ G R R σ T o t a l ) × 100 % or % G R R T o l = ( 6 ⋅ σ G R R U S L − L S L ) × 100 % \%GRR_{TV} = \left( \frac{\sigma_{GRR}}{\sigma_{Total}} \right) \times 100\% \quad \text{or} \quad \%GRR_{Tol} = \left( \frac{6 \cdot \sigma_{GRR}}{USL - LSL} \right) \times 100\% % GR R T V ​ = ( σ T o t a l ​ σ GRR ​ ​ ) × 100% or % GR R T o l ​ = ( U S L − L S L 6 ⋅ σ GRR ​ ​ ) × 100%

AIAG Guidelines for %GRR

%GRR Range Measurement System Evaluation Action Required

< 10 % < 10\% < 10% Acceptable Measurement system is fully capable.

10 % to 30 % 10\% \text{ to } 30\% 10% to 30% Marginal / Conditionally Acceptable May be acceptable based on application importance, gauge cost, or repair difficulty.

> 30 % > 30\% > 30% Unacceptable Measurement system requires remediation (fix gage, improve training, adjust fixture).

Number of Distinct Categories ( n d c ndc n d c )

The Number of Distinct Categories ( n d c ndc n d c ) represents the number of non-overlapping confidence intervals of process variation that the gage can resolve: n d c = ⌊ 1.41 ⋅ ( σ P V σ G R R ) ⌋ ndc = \lfloor 1.41 \cdot \left( \frac{\sigma_{PV}}{\sigma_{GRR}} \right) \rfloor n d c = ⌊ 1.41 ⋅ ( σ GRR ​ σ P V ​ ​ ) ⌋

Acceptance Rule: n d c ≥ 5 ndc \ge 5 n d c ≥ 5 is required for process monitoring and control. If n d c < 5 ndc < 5 n d c < 5 , the measurement system lacks sufficient resolution to discriminate part differences.

Attribute Agreement Analysis (Kappa Statistic)

When inspection yields attribute data (e.g., Pass/Fail visual surface defects), an Attribute Agreement Analysis (AAA) is conducted using 2 to 3 inspectors evaluating 30 to 50 parts multiple times (with a known master standard).

Cohen's Kappa Statistic ( κ \kappa κ )

Cohen's Kappa measures inter-rater agreement above and beyond agreement expected by chance alone: κ = P o − P e 1 − P e \kappa = \frac{P_o - P_e}{1 - P_e} κ = 1 − P e ​ P o ​ − P e ​ ​

P o P_o P o ​ : Observed proportion of concordant agreements between appraisers.

P e P_e P e ​ : Expected proportion of agreement occurring by random chance.

Interpretation of Kappa ( κ \kappa κ )

Kappa ( κ \kappa κ ) Value Level of Agreement

> 0.75 > 0.75 > 0.75 Excellent / Strong agreement beyond chance.

0.40 to 0.75 0.40 \text{ to } 0.75 0.40 to 0.75 Moderate / Marginal agreement .

< 0.40 < 0.40 < 0.40 Poor agreement (unacceptable visual inspection).

Attribute Effectiveness Benchmark Thresholds

Within-Appraiser Agreement (Repeatability): ≥ 90 % \ge 90\% ≥ 90% required (preferably ≥ 95 % \ge 95\% ≥ 95% ).

Between-Appraiser Agreement (Reproducibility): ≥ 90 % \ge 90\% ≥ 90% .

Appraiser vs. Standard Agreement (Accuracy): ≥ 90 % \ge 90\% ≥ 90% .

Worked Numerical Example: Variable Gage R&R

Problem: A Gage R&R study conducted on a digital micrometer yields the following standard deviations from ANOVA calculation:

  • Part-to-Part Standard Deviation: σ P V = 0.0120 mm \sigma_{PV} = 0.0120\text{ mm} σ P V ​ = 0.0120 mm
  • Repeatability Standard Deviation: σ E V = 0.0018 mm \sigma_{EV} = 0.0018\text{ mm} σ E V ​ = 0.0018 mm
  • Reproducibility Standard Deviation: σ A V = 0.0014 mm \sigma_{AV} = 0.0014\text{ mm} σ A V ​ = 0.0014 mm

Evaluate:

Total Gage R&R Standard Deviation ( σ G R R \sigma_{GRR} σ GRR ​ ).

Total Variation Standard Deviation ( σ T V \sigma_{TV} σ T V ​ ).

Percent Gage R&R ( % G R R T V \%GRR_{TV} % GR R T V ​ ).

Number of Distinct Categories ( n d c ndc n d c ).

Step 1: Calculate σ G R R \sigma_{GRR} σ GRR ​ σ G R R = σ E V 2 + σ A V 2 = ( 0.0018 ) 2 + ( 0.0014 ) 2 = 0.00000324 + 0.00000196 = 0.00000520 = 0.00228 mm \sigma_{GRR} = \sqrt{\sigma_{EV}^2 + \sigma_{AV}^2} = \sqrt{(0.0018)^2 + (0.0014)^2} = \sqrt{0.00000324 + 0.00000196} = \sqrt{0.00000520} = 0.00228\text{ mm} σ GRR ​ = σ E V 2 ​ + σ A V 2 ​ ​ = ( 0.0018 ) 2 + ( 0.0014 ) 2 ​ = 0.00000324 + 0.00000196 ​ = 0.00000520 ​ = 0.00228 mm

Step 2: Calculate Total Variation Standard Deviation ( σ T V \sigma_{TV} σ T V ​ ) σ T V = σ P V 2 + σ G R R 2 = ( 0.0120 ) 2 + ( 0.00228 ) 2 = 0.000144 + 0.00000520 = 0.0001492 = 0.012215 mm \sigma_{TV} = \sqrt{\sigma_{PV}^2 + \sigma_{GRR}^2} = \sqrt{(0.0120)^2 + (0.00228)^2} = \sqrt{0.000144 + 0.00000520} = \sqrt{0.0001492} = 0.012215\text{ mm} σ T V ​ = σ P V 2 ​ + σ GRR 2 ​ ​ = ( 0.0120 ) 2 + ( 0.00228 ) 2 ​ = 0.000144 + 0.00000520 ​ = 0.0001492 ​ = 0.012215 mm

Step 3: Calculate % G R R T V \%GRR_{TV} % GR R T V ​ % G R R T V = ( σ G R R σ T V ) × 100 % = ( 0.00228 0.012215 ) × 100 % = 18.67 % \%GRR_{TV} = \left( \frac{\sigma_{GRR}}{\sigma_{TV}} \right) \times 100\% = \left( \frac{0.00228}{0.012215} \right) \times 100\% = 18.67\% % GR R T V ​ = ( σ T V ​ σ GRR ​ ​ ) × 100% = ( 0.012215 0.00228 ​ ) × 100% = 18.67%

Evaluation: Since 10 % < 18.67 % < 30 % 10\% < 18.67\% < 30\% 10% < 18.67% < 30% , the measurement system is conditionally acceptable (marginal) .

Step 4: Calculate Number of Distinct Categories ( n d c ndc n d c ) n d c = ⌊ 1.41 ⋅ ( σ P V σ G R R ) ⌋ = ⌊ 1.41 ⋅ ( 0.0120 0.00228 ) ⌋ = ⌊ 1.41 ⋅ 5.263 ⌋ = ⌊ 7.42 ⌋ = 7 ndc = \left\lfloor 1.41 \cdot \left( \frac{\sigma_{PV}}{\sigma_{GRR}} \right) \right\rfloor = \left\lfloor 1.41 \cdot \left( \frac{0.0120}{0.00228} \right) \right\rfloor = \lfloor 1.41 \cdot 5.263 \rfloor = \lfloor 7.42 \rfloor = 7 n d c = ⌊ 1.41 ⋅ ( σ GRR ​ σ P V ​ ​ ) ⌋ = ⌊ 1.41 ⋅ ( 0.00228 0.0120 ​ ) ⌋ = ⌊ 1.41 ⋅ 5.263 ⌋ = ⌊ 7.42 ⌋ = 7

Evaluation: Since n d c = 7 ≥ 5 ndc = 7 \ge 5 n d c = 7 ≥ 5 , the system has adequate discrimination resolution .