Study guide
4.2 Variable Control Charts
Certified Quality Engineer CQE
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Management and Leadership
1.1 Quality Philosophies & Foundations 1.2 Leadership & Organizational Systems 1.3 ASQ Code of Ethics & Professional Standards 1.4 Strategic Planning & Deployment 1.5 Management Infrastructure & Project Management 1.6 Quality Information Systems & Communication 1.7 Financial & Cost of Quality
2 Chapter 2: The Quality System
2.1 Quality Management System Elements & Standards 2.2 Quality Documentation Architecture 2.3 Quality Auditing Principles & Types 2.4 Audit Planning, Execution & Reporting 2.5 Corrective Action & Preventive Action Systems 2.6 Supplier Quality Management 2.7 Customer Relations & Customer Value 2.8 Quality Training Program Design & Effectiveness
3 Chapter 3: Product, Process, and Service Design
3.1 Design Input & Requirements 3.2 Design Review & Verification 3.3 Failure Mode and Effects Analysis 3.4 Design of Experiments Foundations 3.5 Robust Design & Taguchi Methods 3.6 Reliability & Maintainability Concepts 3.7 Reliability Modeling & System Evaluation 3.8 Technical Drawings, Specifications & GD&T
4 Chapter 4: Product and Process Control
4.1 Statistical Process Control Principles 4.2 Variable Control Charts 4.3 Attribute Control Charts 4.4 Process Capability & Performance Analysis 4.5 Acceptance Sampling Plans & Standards 4.6 Metrology, Calibration & Measurement Uncertainty 4.7 Measurement System Analysis (MSA) 4.8 Material Control, Traceability & MRB
5 Chapter 5: Continuous Improvement
5.1 Continuous Improvement Methodologies 5.2 Classic Quality Tools 5.3 Management & Planning Tools 5.4 Lean Tools & Waste Elimination 5.5 Problem-Solving Methodologies & Root Cause Analysis 5.6 Risk Management & Assessment 5.7 Change Management & Team Facilitation
6 Chapter 6: Quantitative Methods and Tools
6.1 Descriptive Statistics & Data Summarization 6.2 Probability Concepts & Distributions 6.3 Sampling Distributions & Central Limit Theorem 6.4 Point & Interval Estimation 6.5 Hypothesis Testing Fundamentals 6.6 Specific Statistical Tests 6.7 Regression & Correlation Analysis
7 Chapter 7: Risk Management & Advanced Quality Engineering
7.1 Risk Identification & Hazard Analysis 7.2 Quantitative Risk Analysis & Modeling 7.3 Risk Mitigation & Control Planning 7.4 Special Process Control & Advanced SPC 7.5 Advanced Statistical Design & Analysis 7.6 Computer Applications & Quality Engineering Software
4.2 Variable Control Charts
Key Takeaways Explain This Topic AI
For sample sizes n = 2 to 9, the X-bar & R chart is standard, using factor A2 for mean limits (UCL/LCL = X-double-bar ± A2 * R-bar) and D3, D4 for Range limits (UCL = D4 * R-bar, LCL = D3 * R-bar).
For sample sizes n >= 10, the X-bar & S chart is statistically preferred because sample standard deviation S is an unbiased estimator of dispersion, using factors A3, B3, and B4.
The Individual-Moving Range (I-MR) chart handles n = 1 (continuous processes/low volume), using moving range span 2 with E2 = 2.66 for X limits and D4 = 3.267 for MR limits.
Process standard deviation estimation depends directly on the chart type: sigma-hat = R-bar / d2 for Range charts, S-bar / c4 for Standard Deviation charts, and MR-bar / 1.128 for Individual charts.
Last updated: July 2026
4.2 Variable Control Charts
Variable control charts monitor continuous quantitative metrics measured on an interval or ratio scale (e.g., dimension, shaft diameter, weight, tensile strength, temperature, or processing time). Effective process monitoring requires tracking two distinct statistical properties simultaneously: process central tendency (location) and process variability (dispersion).
Overview of Variable Control Chart Selection
Selecting the appropriate variable control chart depends primarily on subgroup size ((n)) and sampling economics:
Subgroup Size ((n)) Primary Location Chart Primary Dispersion Chart Dispersion Estimator ( σ ^ \hat{\sigma} σ ^ ) Required Factors
(n = 1) Individual ((X)) Chart Moving Range ((MR)) Chart (span (=2)) σ ^ = M R ˉ d 2 = M R ˉ 1.128 \hat{\sigma} = \frac{\bar{MR}}{d_2} = \frac{\bar{MR}}{1.128} σ ^ = d 2 MR ˉ = 1.128 MR ˉ E 2 = 2.66 E_2 = 2.66 E 2 = 2.66 , D 4 = 3.267 D_4 = 3.267 D 4 = 3.267 , D 3 = 0 D_3 = 0 D 3 = 0
2 ≤ n ≤ 9 2 \le n \le 9 2 ≤ n ≤ 9 X ˉ \bar{X} X ˉ (X-bar) Chart (R) (Range) Chart σ ^ = R ˉ d 2 \hat{\sigma} = \frac{\bar{R}}{d_2} σ ^ = d 2 R ˉ A 2 , D 3 , D 4 , d 2 A_2, D_3, D_4, d_2 A 2 , D 3 , D 4 , d 2
n ≥ 10 n \ge 10 n ≥ 10 X ˉ \bar{X} X ˉ (X-bar) Chart (S) (Std Dev) Chart σ ^ = S ˉ c 4 \hat{\sigma} = \frac{\bar{S}}{c_4} σ ^ = c 4 S ˉ A 3 , B 3 , B 4 , c 4 A_3, B_3, B_4, c_4 A 3 , B 3 , B 4 , c 4
Control Chart Factors Lookup Table
Control chart factors are derived from normal distribution theory to convert sample statistics into 3-sigma control limits. The table below provides standard ASQ CQE factor values:
Subgroup Size ((n)) A 2 A_2 A 2 d 2 d_2 d 2 D 3 D_3 D 3 D 4 D_4 D 4 A 3 A_3 A 3 c 4 c_4 c 4 B 3 B_3 B 3 B 4 B_4 B 4
- 2 1.880 1.128 0 3.267 2.659 0.7979 0 3.267
- 3 1.023 1.693 0 2.574 1.954 0.8862 0 2.568
- 4 0.729 2.059 0 2.282 1.628 0.9213 0 2.266
- 5 0.577 2.326 0 2.114 1.427 0.9400 0 2.089
- 6 0.483 2.534 0 2.004 1.287 0.9515 0.030 1.970
- 7 0.419 2.704 0.076 1.924 1.182 0.9594 0.118 1.882
- 8 0.373 2.847 0.136 1.864 1.099 0.9650 0.185 1.815
- 9 0.337 2.970 0.184 1.816 1.032 0.9693 0.239 1.761
- 10 0.308 3.078 0.223 1.777 0.975 0.9727 0.284 1.716
- X ˉ \bar{X} X ˉ and (R) Control Charts ( 2 ≤ n ≤ 9 2 \le n \le 9 2 ≤ n ≤ 9 )
The X ˉ \bar{X} X ˉ and (R) chart pair is the standard tool for sample sizes from 2 to 9. The dispersion chart ((R) chart) must always be evaluated first . If the (R) chart is out of control, the sample variation is unstable, rendering the X ˉ \bar{X} X ˉ control limits mathematically invalid.
Formulas:
Subgroup Mean: X ˉ i = ∑ j = 1 n X i j n \bar{X}_i = \frac{\sum_{j=1}^n X_{ij}}{n} X ˉ i = n ∑ j = 1 n X ij
Subgroup Range: R i = X max − X min R_i = X_{\max} - X_{\min} R i = X m a x − X m i n
Overall Grand Mean (Centerline for X ˉ \bar{X} X ˉ ): X ˉ ˉ = ∑ i = 1 k X ˉ i k \bar{\bar{X}} = \frac{\sum_{i=1}^k \bar{X}_i}{k} X ˉ ˉ = k ∑ i = 1 k X ˉ i
Average Range (Centerline for (R)): R ˉ = ∑ i = 1 k R i k \bar{R} = \frac{\sum_{i=1}^k R_i}{k} R ˉ = k ∑ i = 1 k R i
Control Limits: Range Chart Limits: U C L R = D 4 R ˉ , L C L R = D 3 R ˉ \text{Range Chart Limits: } UCL_R = D_4 \bar{R}, \quad LCL_R = D_3 \bar{R} Range Chart Limits: U C L R = D 4 R ˉ , L C L R = D 3 R ˉ X-bar Chart Limits: U C L X ˉ = X ˉ ˉ + A 2 R ˉ , L C L X ˉ = X ˉ ˉ − A 2 R ˉ \text{X-bar Chart Limits: } UCL_{\bar{X}} = \bar{\bar{X}} + A_2 \bar{R}, \quad LCL_{\bar{X}} = \bar{\bar{X}} - A_2 \bar{R} X-bar Chart Limits: U C L X ˉ = X ˉ ˉ + A 2 R ˉ , L C L X ˉ = X ˉ ˉ − A 2 R ˉ Estimated Process Standard Deviation: σ ^ = R ˉ d 2 \text{Estimated Process Standard Deviation: } \hat{\sigma} = \frac{\bar{R}}{d_2} Estimated Process Standard Deviation: σ ^ = d 2 R ˉ
Worked Example 1: X ˉ \bar{X} X ˉ and (R) Calculation
A CNC precision shop collects (k = 25) subgroups of size (n = 5) shaft diameters. The grand mean is X ˉ ˉ = 50.020 mm \bar{\bar{X}} = 50.020\text{ mm} X ˉ ˉ = 50.020 mm , and the average range is R ˉ = 0.150 mm \bar{R} = 0.150\text{ mm} R ˉ = 0.150 mm .
Calculate (R) Chart Limits: From factor lookup for (n = 5): D 3 = 0 D_3 = 0 D 3 = 0 , D 4 = 2.114 D_4 = 2.114 D 4 = 2.114 . U C L R = 2.114 × 0.150 = 0.3171 mm UCL_R = 2.114 \times 0.150 = 0.3171\text{ mm} U C L R = 2.114 × 0.150 = 0.3171 mm L C L R = 0 × 0.150 = 0.0000 mm LCL_R = 0 \times 0.150 = 0.0000\text{ mm} L C L R = 0 × 0.150 = 0.0000 mm
Calculate X ˉ \bar{X} X ˉ Chart Limits: From factor lookup for (n = 5): A 2 = 0.577 A_2 = 0.577 A 2 = 0.577 . U C L X ˉ = 50.020 + ( 0.577 × 0.150 ) = 50.020 + 0.08655 = 50.10655 mm UCL_{\bar{X}} = 50.020 + (0.577 \times 0.150) = 50.020 + 0.08655 = 50.10655\text{ mm} U C L X ˉ = 50.020 + ( 0.577 × 0.150 ) = 50.020 + 0.08655 = 50.10655 mm L C L X ˉ = 50.020 − ( 0.577 × 0.150 ) = 50.020 − 0.08655 = 49.93345 mm LCL_{\bar{X}} = 50.020 - (0.577 \times 0.150) = 50.020 - 0.08655 = 49.93345\text{ mm} L C L X ˉ = 50.020 − ( 0.577 × 0.150 ) = 50.020 − 0.08655 = 49.93345 mm
Estimate Process Standard Deviation ( σ ^ \hat{\sigma} σ ^ ): From factor lookup for (n = 5): d 2 = 2.326 d_2 = 2.326 d 2 = 2.326 . σ ^ = 0.150 2.326 = 0.06449 mm \hat{\sigma} = \frac{0.150}{2.326} = 0.06449\text{ mm} σ ^ = 2.326 0.150 = 0.06449 mm
X ˉ \bar{X} X ˉ and (S) Control Charts ( n ≥ 10 n \ge 10 n ≥ 10 )
When subgroup size n ≥ 10 n \ge 10 n ≥ 10 , the sample range (R) becomes an inefficient estimator of process dispersion because it depends solely on extreme values. Sample standard deviation (S) utilizes every data point in the subgroup, making X ˉ \bar{X} X ˉ and (S) charts statistically superior.
Formulas:
Subgroup Standard Deviation: S i = ∑ j = 1 n ( X i j − X ˉ i ) 2 n − 1 S_i = \sqrt{\frac{\sum_{j=1}^n (X_{ij} - \bar{X}_i)^2}{n - 1}} S i = n − 1 ∑ j = 1 n ( X ij − X ˉ i ) 2
Average Standard Deviation: S ˉ = ∑ i = 1 k S i k \bar{S} = \frac{\sum_{i=1}^k S_i}{k} S ˉ = k ∑ i = 1 k S i
Control Limits: S Chart Limits: U C L S = B 4 S ˉ , L C L S = B 3 S ˉ \text{S Chart Limits: } UCL_S = B_4 \bar{S}, \quad LCL_S = B_3 \bar{S} S Chart Limits: U C L S = B 4 S ˉ , L C L S = B 3 S ˉ X-bar Chart Limits: U C L X ˉ = X ˉ ˉ + A 3 S ˉ , L C L X ˉ = X ˉ ˉ − A 3 S ˉ \text{X-bar Chart Limits: } UCL_{\bar{X}} = \bar{\bar{X}} + A_3 \bar{S}, \quad LCL_{\bar{X}} = \bar{\bar{X}} - A_3 \bar{S} X-bar Chart Limits: U C L X ˉ = X ˉ ˉ + A 3 S ˉ , L C L X ˉ = X ˉ ˉ − A 3 S ˉ Estimated Process Standard Deviation: σ ^ = S ˉ c 4 \text{Estimated Process Standard Deviation: } \hat{\sigma} = \frac{\bar{S}}{c_4} Estimated Process Standard Deviation: σ ^ = c 4 S ˉ
Worked Example 2: X ˉ \bar{X} X ˉ and (S) Calculation
An automated stamping process with subgroup size (n = 10) collects (k = 20) subgroups, yielding X ˉ ˉ = 12.500 mm \bar{\bar{X}} = 12.500\text{ mm} X ˉ ˉ = 12.500 mm and S ˉ = 0.040 mm \bar{S} = 0.040\text{ mm} S ˉ = 0.040 mm .
From factor table for (n = 10): A 3 = 0.975 A_3 = 0.975 A 3 = 0.975 , B 3 = 0.284 B_3 = 0.284 B 3 = 0.284 , B 4 = 1.716 B_4 = 1.716 B 4 = 1.716 , c 4 = 0.9727 c_4 = 0.9727 c 4 = 0.9727 .
(S) Chart Limits: U C L S = 1.716 × 0.040 = 0.06864 mm UCL_S = 1.716 \times 0.040 = 0.06864\text{ mm} U C L S = 1.716 × 0.040 = 0.06864 mm L C L S = 0.284 × 0.040 = 0.01136 mm LCL_S = 0.284 \times 0.040 = 0.01136\text{ mm} L C L S = 0.284 × 0.040 = 0.01136 mm
X ˉ \bar{X} X ˉ Chart Limits: U C L X ˉ = 12.500 + ( 0.975 × 0.040 ) = 12.500 + 0.0390 = 12.5390 mm UCL_{\bar{X}} = 12.500 + (0.975 \times 0.040) = 12.500 + 0.0390 = 12.5390\text{ mm} U C L X ˉ = 12.500 + ( 0.975 × 0.040 ) = 12.500 + 0.0390 = 12.5390 mm L C L X ˉ = 12.500 − ( 0.975 × 0.040 ) = 12.500 − 0.0390 = 12.4610 mm LCL_{\bar{X}} = 12.500 - (0.975 \times 0.040) = 12.500 - 0.0390 = 12.4610\text{ mm} L C L X ˉ = 12.500 − ( 0.975 × 0.040 ) = 12.500 − 0.0390 = 12.4610 mm
Estimate Process Standard Deviation ( σ ^ \hat{\sigma} σ ^ ): σ ^ = 0.040 0.9727 = 0.04112 mm \hat{\sigma} = \frac{0.040}{0.9727} = 0.04112\text{ mm} σ ^ = 0.9727 0.040 = 0.04112 mm
Individual and Moving Range ((I-MR)) Charts ((n = 1))
Used when rational subgrouping is impossible or impractical—such as automated 100% inspection, continuous chemical processing, low-volume production, or destructive testing.
Formulas (Moving Range Span = 2):
Moving Range: M R i = ∣ X i − X i − 1 ∣ MR_i = |X_i - X_{i-1}| M R i = ∣ X i − X i − 1 ∣ for i = 2 , 3 , … , k i = 2, 3, \dots, k i = 2 , 3 , … , k
Average Moving Range: M R ˉ = ∑ i = 2 k M R i k − 1 \bar{MR} = \frac{\sum_{i=2}^k MR_i}{k - 1} MR ˉ = k − 1 ∑ i = 2 k M R i
Centerline for Individuals: X ˉ = ∑ X i k \bar{X} = \frac{\sum X_i}{k} X ˉ = k ∑ X i
Control Limits: Moving Range Limits: U C L M R = D 4 M R ˉ = 3.267 M R ˉ , L C L M R = 0 \text{Moving Range Limits: } UCL_{MR} = D_4 \bar{MR} = 3.267 \bar{MR}, \quad LCL_{MR} = 0 Moving Range Limits: U C L MR = D 4 MR ˉ = 3.267 MR ˉ , L C L MR = 0 Individual Limits: U C L X = X ˉ + E 2 M R ˉ = X ˉ + 2.660 M R ˉ , L C L X = X ˉ − 2.660 M R ˉ \text{Individual Limits: } UCL_X = \bar{X} + E_2 \bar{MR} = \bar{X} + 2.660 \bar{MR}, \quad LCL_X = \bar{X} - 2.660 \bar{MR} Individual Limits: U C L X = X ˉ + E 2 MR ˉ = X ˉ + 2.660 MR ˉ , L C L X = X ˉ − 2.660 MR ˉ Estimated Process Standard Deviation: σ ^ = M R ˉ d 2 = M R ˉ 1.128 \text{Estimated Process Standard Deviation: } \hat{\sigma} = \frac{\bar{MR}}{d_2} = \frac{\bar{MR}}{1.128} Estimated Process Standard Deviation: σ ^ = d 2 MR ˉ = 1.128 MR ˉ
Note: The factor E 2 = 3 d 2 = 3 1.128 ≈ 2.660 E_2 = \frac{3}{d_2} = \frac{3}{1.128} \approx 2.660 E 2 = d 2 3 = 1.128 3 ≈ 2.660 .