Study guide

3.3 Failure Mode and Effects Analysis

Certified Quality Engineer CQE

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Management and Leadership

1.1 Quality Philosophies & Foundations 1.2 Leadership & Organizational Systems 1.3 ASQ Code of Ethics & Professional Standards 1.4 Strategic Planning & Deployment 1.5 Management Infrastructure & Project Management 1.6 Quality Information Systems & Communication 1.7 Financial & Cost of Quality

2 Chapter 2: The Quality System

2.1 Quality Management System Elements & Standards 2.2 Quality Documentation Architecture 2.3 Quality Auditing Principles & Types 2.4 Audit Planning, Execution & Reporting 2.5 Corrective Action & Preventive Action Systems 2.6 Supplier Quality Management 2.7 Customer Relations & Customer Value 2.8 Quality Training Program Design & Effectiveness

3 Chapter 3: Product, Process, and Service Design

3.1 Design Input & Requirements 3.2 Design Review & Verification 3.3 Failure Mode and Effects Analysis 3.4 Design of Experiments Foundations 3.5 Robust Design & Taguchi Methods 3.6 Reliability & Maintainability Concepts 3.7 Reliability Modeling & System Evaluation 3.8 Technical Drawings, Specifications & GD&T

4 Chapter 4: Product and Process Control

4.1 Statistical Process Control Principles 4.2 Variable Control Charts 4.3 Attribute Control Charts 4.4 Process Capability & Performance Analysis 4.5 Acceptance Sampling Plans & Standards 4.6 Metrology, Calibration & Measurement Uncertainty 4.7 Measurement System Analysis (MSA) 4.8 Material Control, Traceability & MRB

5 Chapter 5: Continuous Improvement

5.1 Continuous Improvement Methodologies 5.2 Classic Quality Tools 5.3 Management & Planning Tools 5.4 Lean Tools & Waste Elimination 5.5 Problem-Solving Methodologies & Root Cause Analysis 5.6 Risk Management & Assessment 5.7 Change Management & Team Facilitation

6 Chapter 6: Quantitative Methods and Tools

6.1 Descriptive Statistics & Data Summarization 6.2 Probability Concepts & Distributions 6.3 Sampling Distributions & Central Limit Theorem 6.4 Point & Interval Estimation 6.5 Hypothesis Testing Fundamentals 6.6 Specific Statistical Tests 6.7 Regression & Correlation Analysis

7 Chapter 7: Risk Management & Advanced Quality Engineering

7.1 Risk Identification & Hazard Analysis 7.2 Quantitative Risk Analysis & Modeling 7.3 Risk Mitigation & Control Planning 7.4 Special Process Control & Advanced SPC 7.5 Advanced Statistical Design & Analysis 7.6 Computer Applications & Quality Engineering Software

3.3 Failure Mode and Effects Analysis

Key Takeaways Explain This Topic AI

FMEA is a proactive risk assessment technique that identifies potential failure modes, evaluates their effects, determines causes, and prioritizes mitigation actions.

Design FMEA (DFMEA) focuses on component/system failure modes resulting from design deficiencies, whereas Process FMEA (PFMEA) focuses on failure modes originating from manufacturing, assembly, and process variables.

The Risk Priority Number (RPN) is calculated as RPN = Severity (S) x Occurrence (O) x Detection (D), with rating scales typically ranging from 1 to 10 for each factor.

AIAG & VDA FMEA standards replace or supplement traditional RPN with Action Priority (AP) tables (High, Medium, Low) to emphasize mitigating high-severity risks regardless of low occurrence or high detection ratings.

Last updated: July 2026

Loading diagram... FMEA Process & Risk Mitigation Flow

3.3 Failure Mode and Effects Analysis (FMEA)

Failure Mode and Effects Analysis (FMEA) is a proactive, structured methodology used by quality engineers to identify potential failure modes in a design or process, evaluate the risk associated with those failure modes, and rank order recommended corrective actions. First developed by the U.S. Military in the late 1940s (MIL-P-1629) and later popularized by NASA and the automotive industry (QS-9000 / AIAG), FMEA is a core tool in Advanced Product Quality Planning (APQP) .

1. DFMEA vs. PFMEA Comparison

FMEA is primarily applied in two distinct domains during product deployment: Design FMEA (DFMEA) and Process FMEA (PFMEA) . +-----------------------------------------------------------------------------------+

  • | FMEA TYPES |
  • +-----------------------------------------+-----------------------------------------+
  • | DESIGN FMEA (DFMEA) | PROCESS FMEA (PFMEA) |
  • +-----------------------------------------+-----------------------------------------+
  • | Scope: Component & system functions | Scope: Manufacturing & assembly steps |
  • | Focus: Design deficiencies, geometry, | Focus: Human error, machine wear, |
  • | material selection, stress thresholds | tooling misadjustment, environment |
  • | Assumes: Manufacturing is executed | Assumes: Product design is correct |
  • | according to specifications | and meets functional intent |
  • +-----------------------------------------+-----------------------------------------+
  • Comprehensive Comparison Matrix

Feature Design FMEA (DFMEA) Process FMEA (PFMEA)

Primary Objective Ensure product functions safely and reliably under expected operating conditions Ensure product is manufactured consistently according to design intent

Item Evaluated Subsystems, components, material properties, physical geometry Manufacturing operations, assembly steps, tooling, maintenance

Potential Failure Mode Physical fracture, thermal degradation, electrical short Incorrect torque, missing component, wrong orientation, contamination

Root Causes Material selection, stress concentration, thermal expansion mismatch Operator mistake, machine drift, worn fixture, incorrect feed rate

Preventive Controls Finite Element Analysis (FEA), design rules, safety factors Poka-yoke (mistake-proofing), preventive maintenance, work instructions

Detection Controls Prototype accelerated life testing, stress testing Automated vision inspection, inline gauging, 100% functional test

2. FMEA Risk Evaluation Metrics (Severity, Occurrence, Detection)

Three rating scales, each scored on a 1-to-10 scale, are used to evaluate risk:

Severity (S): Assessment of the seriousness of the effect of a potential failure mode on the customer or downstream user ( 1 = negligible impact 1 = \text{negligible impact} 1 = negligible impact , 10 = hazardous failure without warning 10 = \text{hazardous failure without warning} 10 = hazardous failure without warning ).

Note: Severity relates ONLY to the effect of the failure mode.

Occurrence (O): Assessment of the likelihood that a specific cause will occur during the product's design life or process execution ( 1 = extremely unlikely / < 1 in 1 , 500 , 000 1 = \text{extremely unlikely / } < 1 \text{ in } 1,500,000 1 = extremely unlikely / < 1 in 1 , 500 , 000 , 10 = almost certain / > 1 in 10 10 = \text{almost certain / } > 1 \text{ in } 10 10 = almost certain / > 1 in 10 ).

Detection (D): Assessment of the capability of current design or process controls to detect the failure cause or failure mode BEFORE the product leaves the design organization or manufacturing facility ( 1 = certain detection / automated poka-yoke 1 = \text{certain detection / automated poka-yoke} 1 = certain detection / automated poka-yoke , 10 = absolute uncertainty of detection / no control 10 = \text{absolute uncertainty of detection / no control} 10 = absolute uncertainty of detection / no control ).

Note: Lower Detection numerical values represent BETTER detection capabilities.

  • 3. Risk Priority Number (RPN) & AIAG & VDA Action Priority (AP)
  • Traditional RPN Calculation

The Risk Priority Number (RPN) is the mathematical product of Severity, Occurrence, and Detection: R P N = S × O × D RPN = S \times O \times D RPN = S × O × D

Because each factor ranges from 1 to 10, the RPN ranges from 1 to 1,000 .

Worked Numerical Example

Consider an automotive brake caliper design evaluated in a DFMEA:

Failure Mode: Hydraulic fluid seal degradation at low ambient temperature ( − 40 ∘ C -40^\circ\text{C} − 4 0 ∘ C ).

Failure Effect: Loss of braking capability leading to vehicle collision ( S = 10 S = 10 S = 10 ).

Failure Cause: Seal polymer glass transition point exceeded ( O = 4 O = 4 O = 4 ).

Current Detection Control: Standard room-temperature pressure test ( D = 6 D = 6 D = 6 ).

Initial RPN Calculation: R P N initial = 10 × 4 × 6 = 240 RPN_{\text{initial}} = 10 \times 4 \times 6 = 240 RP N initial ​ = 10 × 4 × 6 = 240

Recommended Mitigation Action:

Redesign seal using a fluorosilicone elastomer (lowers glass transition temperature) and implement low-temperature qualification testing.

Revised Scoring Post-Mitigation:

Severity ( S S S ): Remains 10 (The severity of losing brakes does NOT change unless the system architecture changes).

Occurrence ( O O O ): Reduced to 1 (Material change eliminates cold-weather degradation).

Detection ( D D D ): Reduced to 2 (Low-temperature qualification test guarantees detection).

Revised RPN Calculation: R P N revised = 10 × 1 × 2 = 20 RPN_{\text{revised}} = 10 \times 1 \times 2 = 20 RP N revised ​ = 10 × 1 × 2 = 20

Net RPN Reduction: 240 − 20 = 220 240 - 20 = 220 240 − 20 = 220 point risk reduction ( 91.7 % 91.7\% 91.7% risk reduction).

AIAG & VDA Action Priority (AP) Framework

Traditional reliance on RPN thresholds (e.g., "take action if R P N > 100 RPN > 100 RPN > 100 ") had a fatal flaw: an item with S = 10 , O = 2 , D = 4 S=10, O=2, D=4 S = 10 , O = 2 , D = 4 ( R P N = 80 RPN = 80 RPN = 80 ) would be ignored, while an item with S = 4 , O = 5 , D = 6 S=4, O=5, D=6 S = 4 , O = 5 , D = 6 ( R P N = 120 RPN = 120 RPN = 120 ) would trigger corrective action, despite the former carrying catastrophic safety risk.

The unified AIAG & VDA FMEA Handbook (2019) introduced Action Priority (AP) tables, which prioritize risk based on logic trees prioritizing Severity first , then Occurrence , then Detection :

High (H) Priority: High severity ( S = 9 − 10 S = 9-10 S = 9 − 10 ) paired with moderate-to-high occurrence or detection. Mandatory action required.

Medium (M) Priority: Moderate severity or lower occurrence/detection. Action recommended to lower risk.

Low (L) Priority: Low risk across all dimensions. Optional action.

4. CQE Exam Tips & Key Pitfalls

Important

A mandatory CQE exam rule: Severity (S) can ONLY be reduced by changing the physical design geometry, material, or system function. Adding an inspection, testing protocol, or SPC chart does NOT change Severity—it only lowers the Detection (D) or Occurrence (O) score!