Study guide

How the Exam Blueprint Maps to ISO 14001, ISO 19011 and ISO/IEC 17021-1

CQI/IRCA ISO 14001:2015 EMS Lead Auditor Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction: The CQI/IRCA EMS Lead Auditor Exam

About the CQI/IRCA EMS Lead Auditor Exam How the Exam Blueprint Maps to ISO 14001, ISO 19011 and ISO/IEC 17021-1

2 Chapter 1: EMS Principles, Context & Scope

1.1 EMS Purpose, Intended Outcomes & Annex SL Framework 1.2 Context of the Organization & Needs of Interested Parties 1.3 Scope of the Environmental Management System

3 Chapter 2: Leadership, Aspects & Compliance Planning

2.1 Leadership, Commitment & Environmental Policy 2.2 Environmental Aspects, Impacts & Significance Criteria 2.3 Compliance Obligations, Risks & Opportunities, and Environmental Objectives

4 Chapter 3: Support, Operations, Performance Evaluation & Improvement

3.1 Competence, Awareness, Communication & Documented Information 3.2 Operational Planning, Control & Life Cycle Perspective 3.3 Emergency Preparedness and Response 3.4 Auditing Clause 9.2: Internal Audit and the Internal Audit Programme 3.5 Auditing Clause 9.3: Management Review Inputs, Outputs and Decisions 3.6 Auditing Clause 6.1.4 Planning Action and Clause 10 Improvement

5 Chapter 4: Audit Principles, Responsibilities & Code of Conduct

4.1 ISO 19011:2018 Seven Principles of Auditing 4.2 Audit Types (1st, 2nd, 3rd Party) and Audit Scope, Criteria & Objectives 4.3 Managing the Audit Programme (ISO 19011:2018 Clause 5) 4.4 Auditor Competence, Team Leadership & the IRCA Code of Conduct

6 Chapter 5: Audit Planning & Stage 1 Preparation

5.1 Initiating the Audit: Contact, Feasibility & Audit Team Assignment 5.2 Stage 1 Audit Objectives, Documentation Review & Readiness Assessment 5.3 Risk-Based Audit Planning, Sampling Strategy & Audit Plans 5.4 Developing Audit Checklists, Work Documents & Audit Trails

7 Chapter 6: Conducting On-Site Audits & Gathering Evidence

6.1 Opening Meeting Protocols, On-Site Logistics & Communication 6.2 Gathering Objective Evidence: Interviewing, Observation & Sampling 6.3 Auditing Environmental Controls, Permits & Compliance Evaluation

8 Chapter 7: Generating Findings, Nonconformities & Closing Meeting

7.1 Evaluating Evidence & Categorizing Findings (Major, Minor, OFI) 7.2 Formulating Defensible Nonconformity Statements 7.3 Closing Meeting Conduct, Reaching Consensus & Explaining Audit Conclusions

9 Chapter 8: Audit Reporting, Corrective Action & Certification

8.1 Audit Report Preparation, Distribution & Confidentiality 8.2 Corrective Action, Root Cause Analysis & Verification of Effectiveness 8.3 Third-Party Certification Cycles, Surveillance & Recertification

How the Exam Blueprint Maps to ISO 14001, ISO 19011 and ISO/IEC 17021-1

Key Takeaways Explain This Topic AI

ISO 14001:2015 supplies the audit criteria, ISO 19011:2018 the audit method, and ISO/IEC 17021-1:2015 the third-party certification rules.

Major and minor nonconformity are defined in ISO/IEC 17021-1 Clauses 3.12 and 3.13, not in ISO 14001 or ISO 19011.

ISO 14001:2015 Clause 10.2 has no sub-clause 10.2.1 and no 'update risks and opportunities' step — that step is ISO 9001:2015 Clause 10.2.1 e).

ISO 19011:2018 renumbered Clause 6.4: opening meeting is 6.4.3, guides and observers 6.4.2, collecting information 6.4.7 and the closing meeting 6.4.10.

Annex A of both ISO 14001 and ISO 19011 is guidance, so nonconformities must be written against the numbered requirement clause instead.

Last updated: September 2026

How the Exam Blueprint Maps to ISO 14001, ISO 19011 and ISO/IEC 17021-1

Quick Answer: The CQI/IRCA Lead Auditor exam draws on three different documents , and a large share of avoidable marks are lost by quoting the right rule from the wrong one. ISO 14001:2015 supplies the audit criteria you assess the auditee against. ISO 19011:2018 supplies the audit process you follow. ISO/IEC 17021-1:2015 supplies the third-party certification rules — including the definitions of major and minor nonconformity, which are not in ISO 19011 or ISO 14001.

Which Standard Answers Which Question

Exam section Questions Primary source Typical clause range

1. Concepts and principles of Management Standards and Systems 6 ISO 14001:2015 Clauses 1, 3, 4, 5, and Annex SL structure

2. Audit concepts and auditor responsibilities 6 ISO 19011:2018 + CQI/IRCA Code of Conduct Clauses 3, 4, 5, 7; ISO/IEC 17021-1 Clauses 5.2, 8.4

3. Planning the audit 6 ISO 19011:2018 Clauses 5.5, 6.2, 6.3; ISO/IEC 17021-1 Clause 9.3

4. Conducting the audit 14 ISO 19011:2018 and ISO 14001:2015 together ISO 19011 Clause 6.4; ISO 14001 Clauses 6 to 9

5. Reporting and closing out the audit 8 ISO 19011:2018 + ISO/IEC 17021-1 ISO 19011 Clauses 6.4.8 to 6.7; ISO/IEC 17021-1 Clauses 9.4, 9.6

Section 4 is the one that requires both standards simultaneously. A typical Section 4 item describes an on-site observation and asks what the auditor should do; answering it correctly needs the ISO 14001 requirement (what the auditee must have) and the ISO 19011 method (how the auditor should verify, sample, corroborate and record it). That dual demand is why the section is weighted at 35 percent.

  • The Division of Labour, Stated Plainly ISO 14001:2015 ISO 19011:2018 ISO/IEC 17021-1:2015
  • -------------- -------------- --------------------
  • WHAT the auditee HOW the auditor WHAT the certification
  • must have works body must do
  • Clauses 4-10 = Clause 4 = principles Cl 3.12/3.13 = major/
  • the audit criteria Clause 5 = programme minor nonconformity
  • Clause 3 = EMS terms Clause 6 = the audit Cl 9.3 = stage 1 / 2
  • Annex A = guidance Clause 7 = competence Cl 9.4 = conducting
  • (guidance, not Annex A = guidance Cl 9.6 = surveillance,
  • requirements) (guidance, not recertification,
  • requirements) suspension

Two of those boxes contain guidance, not requirements . ISO 14001 Annex A and ISO 19011 Annex A both explain intent; neither creates an auditable obligation. Writing a nonconformity against "ISO 14001:2015 Annex A.6.1.2" is a citation error — the requirement lives in Clause 6.1.2, and Annex A only explains it.

  • Four Cross-Standard Traps That Cost Real Marks
  • Trap 1: Importing ISO 9001 clause numbering into ISO 14001

The two standards share Annex SL's top-level architecture but diverge in their sub-clauses . The most damaging examples:

Requirement ISO 14001:2015 ISO 9001:2015

Nonconformity and corrective action Clause 10.2 , lettered a) to e), no sub-clause Clause 10.2.1 a) to f), plus 10.2.2

  • "Update risks and opportunities" step Does not exist Clause 10.2.1 e)
  • Planning action Clause 6.1.4 — unique to ISO 14001 No equivalent
  • Aspects / compliance obligations Clauses 6.1.2 and 6.1.3 No equivalent

Clause exclusions permitted? No — every clause applies within scope Yes, via Clause 4.3 justified non-applicability

Citing "ISO 14001:2015 Clause 10.2.1" in a nonconformity statement is enough on its own to have a finding overturned on appeal, because the cited requirement does not exist.

Trap 2: Using ISO 19011:2011 numbering while calling it 2018

The 2018 edition renumbered Clause 6.4 . Revision material written for the older edition is still circulating and remains a common source of error:

  • Activity ISO 19011: 2018 ISO 19011:2011 (superseded)
  • Guides and observers 6.4.2 6.4.3
  • Opening meeting 6.4.3 6.4.2
  • Communicating during the audit 6.4.4 6.4.4
  • Collecting and verifying information 6.4.7 6.4.5
  • Generating audit findings 6.4.8 6.4.6
  • Determining audit conclusions 6.4.9 6.4.7
  • Closing meeting 6.4.10 6.4.8
  • Preparing audit report 6.5.1 6.5.1
  • Distributing audit report 6.5.2 (there is no 6.5.3) 6.5.2

If a revision source tells you the opening meeting is Clause 6.4.2, it is quoting the withdrawn 2011 edition.

Trap 3: Looking for major and minor nonconformity in the wrong standard

Neither ISO 14001 nor ISO 19011 defines major or minor nonconformity. Both terms are defined in ISO/IEC 17021-1:2015 :

3.11 nonconformity — non-fulfilment of a requirement.

3.12 major nonconformity — a nonconformity that affects the capability of the management system to achieve the intended results . The note to the entry adds that an accumulation of minor nonconformities against the same requirement or issue can demonstrate a systemic failure and therefore constitute a major.

3.13 minor nonconformity — a nonconformity that does not affect that capability.

ISO/IEC 17021-1 Clause 9.4.5 governs how findings are recorded, not how they are defined: 9.4.5.1 covers recording findings, 9.4.5.2 covers opportunities for improvement , 9.4.5.3 requires each nonconformity to be recorded against a specific requirement with detailed objective evidence, and 9.4.5.4 covers diverging opinions. Citing 9.4.5.2 as the definition of a major nonconformity points at the OFI clause.

Trap 4: Treating notes as requirements

ISO standards distinguish normative text from notes. The most frequently mis-quoted example in this syllabus: ISO/IEC 17021-1 Clause 9.6.5.3 carries a note saying that in most cases suspension would not exceed six months. That is guidance. The binding requirement is Clause 9.6.5.4 — failure to resolve within the time established by the certification body results in withdrawal or reduction of scope.

Where to Spend Your Revision Time

Priority Focus Why

Highest ISO 19011 Clause 6.4 and ISO 14001 Clauses 6, 8 and 9, worked as scenarios 14 of 40 marks, all scenario-based

High Nonconformity grading, statement writing, closing meeting, reporting 8 of 40 marks, also scenario-based

Medium ISO 19011 Clauses 5 and 6.2 to 6.3 (programme, initiation, planning) 6 of 40 marks, with a per-domain floor

Medium ISO 19011 Clause 4 principles, Clause 7 competence, IRCA Code of Conduct 6 of 40 marks, with a per-domain floor

Medium ISO 14001 Clauses 1 and 3 to 5, Annex SL, PDCA 6 of 40 marks, with a per-domain floor

Note carefully what the per-domain floor does to this table: the three six-question sections cannot be traded away even though they are individually small. The right strategy is depth on Sections 4 and 5, sufficiency everywhere else — never abandonment.