Study guide

7.3 Key Standards, Regulations & Governing Bodies

CRCST Certified Registered Central Service Technician Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction: Central Service & the CRCST Certification

0.1 CRCST Exam Overview & Certification Requirements 0.2 The Central Service / Sterile Processing Department 0.3 Medical Terminology for Central Service 0.4 CRCST Exam Study Strategies & Test-Taking Tips

2 Chapter 1: Microbiology & Infection Prevention

1.1 Microbiology Fundamentals for Central Service 1.2 The Chain of Infection 1.3 The Spaulding Classification System 1.4 Anatomy & Physiology Basics for Central Service

3 Chapter 2: Cleaning, Decontamination & Disinfection (21%)

2.1 Safety in the Decontamination Area 2.2 Point-of-Use Treatment & Transport 2.3 Manual Cleaning Methods 2.4 Automated Cleaning Methods 2.5 High-Level Disinfection (HLD) 2.6 Disinfectant Categories & Selection

4 Chapter 3: Preparation & Packaging (21%)

3.1 Instrument Inspection & Functionality Testing 3.2 Surgical Instrument Identification & Categories 3.3 Packaging Systems for Sterilization 3.4 Tray Assembly & Weight Limits

5 Chapter 4: Sterilization (21%)

4.1 Steam Sterilization Fundamentals 4.2 Low-Temperature Sterilization Methods 4.3 Sterilization Monitoring & Quality Assurance 4.4 Immediate-Use Steam Sterilization (IUSS) 4.5 Sterilizer Anatomy & Loading Principles

6 Chapter 5: Sterile Storage & Distribution Systems (9%)

5.1 Sterile Storage Area Requirements 5.2 Distribution Systems 5.3 Inventory Management & Materials Management

7 Chapter 6: Patient Care Equipment (5%)

6.1 Patient Care Equipment Handling & Processing 6.2 Water Quality in Instrument Processing 6.3 Endoscope Reprocessing

8 Chapter 7: Documentation & Record Maintenance

7.1 Documentation & Record-Keeping Requirements 7.2 Quality Assurance Programs & Compliance 7.3 Key Standards, Regulations & Governing Bodies

9 Chapter 8: Customer Relations & Professional Development (8%)

8.1 Communication & Customer Service in Sterile Processing 8.2 Professional Development & Workplace Ethics 8.3 Workplace Safety & Risk Management

7.3 Key Standards, Regulations & Governing Bodies

Key Takeaways Explain This Topic AI

AAMI publishes voluntary consensus standards: ST79 (steam), ST91:2021 (endoscopes), ST108:2023 (water), ST58 (chemical/HLD), and ST77 (containment devices)

AAMI ST79 is the comprehensive guide to steam sterilization and sterility assurance and one of the three references HSPA lists for creating the CRCST exam

AORN publishes the annually updated Guidelines for Perioperative Practice; CDC publishes the disinfection/sterilization guideline that defines the Spaulding classification

TJC accredits facilities and confers CMS deemed status; CMS sets the Conditions of Participation that hospitals must meet

OSHA enforces 29 CFR 1910.1030 (bloodborne pathogens) and 1910.1200 (hazard communication / SDS)

The FDA regulates devices, mandates validated IFUs, manages Class I/II/III recalls, and oversees single-use device reprocessing and Medical Device Reporting

Standards are recommendations until a regulator (FDA, OSHA, CMS) or an accreditor (TJC) adopts or enforces them, which gives them legal force

Last updated: October 2026

Standards vs. Regulations — Know the Difference

The CRCST exam draws a sharp line the SPD technician must internalize: a standard is a voluntary best practice written by a professional body, while a regulation is law enforced by a government agency. A standard such as AAMI ST79 carries weight on its own, but it acquires real teeth when an accreditor (TJC) surveys against it or a regulator (CMS, FDA, OSHA) adopts or references it. So the practical answer to "Do we have to follow ST79?" is yes — because TJC and CMS expect compliance with recognized national standards.

Standards-Setting Organizations

AAMI (Association for the Advancement of Medical Instrumentation) writes the technical consensus standards that define how SPD work is done. Know which standard owns which topic — mixing them up is the single most common ST-series exam trap.

  • Standard Scope
  • ST79 Comprehensive guide to steam sterilization and sterility assurance
  • ST91 (2021) Flexible and semi-rigid endoscope processing
  • ST108 (2023) Water for the processing of medical devices
  • ST58 Chemical sterilization and high-level disinfection (EtO, hydrogen peroxide)
  • ST77 Containment devices (rigid containers, filters)

AORN (Association of periOperative Registered Nurses) publishes the Guidelines for Perioperative Practice , updated every year, covering cleaning, packaging, sterile technique, and environmental controls; it is cited alongside AAMI on the exam.

CDC (Centers for Disease Control and Prevention) issues the Guideline for Disinfection and Sterilization in Healthcare Facilities , which is the source of the Spaulding classification (critical, semi-critical, non-critical) that drives reprocessing decisions.

  • Regulatory and Accrediting Bodies
  • The Joint Commission (TJC)

TJC accredits hospitals and ambulatory surgery centers through unannounced surveys . CS-relevant focus areas include environmental controls (temperature, humidity, air exchanges), sterilization monitoring (mechanical/chemical/biological), competency documentation, IFU availability, and record-keeping. Crucially, TJC accreditation confers CMS deemed status — a TJC-accredited facility is presumed to meet CMS requirements, so a failed survey can threaten reimbursement.

CMS (Centers for Medicare & Medicaid Services)

CMS sets the Conditions of Participation (CoPs) — the federal rules a hospital must meet to bill Medicare and Medicaid. The CoPs require an effective infection-control and sterilization program. CMS can survey directly or rely on a deemed accreditor.

OSHA (Occupational Safety and Health Administration)

OSHA enforces worker safety law, the most exam-relevant being:

29 CFR 1910.1030 — Bloodborne Pathogens Standard (exposure control plan, hepatitis B vaccine offer, sharps handling)

  • 29 CFR 1910.1200 — Hazard Communication (Safety Data Sheets, GHS labeling for sterilants like OPA and EtO)
  • 29 CFR 1910.132–138 — Personal protective equipment requirements
  • FDA (Food and Drug Administration)

The FDA regulates medical devices . It requires manufacturers to supply validated IFUs , manages device recalls classified Class I (reasonable probability of serious harm or death), Class II (temporary or reversible harm), and Class III (unlikely to cause harm). It regulates single-use device (SUD) reprocessing — only FDA-registered third-party reprocessors may legally reprocess approved SUDs — and enforces Medical Device Reporting (MDR) , under which facilities must report device-related deaths and serious injuries.

State Health Departments

States may impose requirements stricter than federal law, conduct licensing surveys, and — in a handful of states — mandate SPD personnel certification . New Jersey was the first state to require certification of sterile processing technicians, and HSPA's legislation page now lists seven states that require it: Connecticut, Delaware, Minnesota, New Jersey, New York, Pennsylvania and Tennessee. Always defer to the strictest applicable rule when federal, state, accreditor, and manufacturer requirements differ.

How the Bodies Fit Together

It helps to picture the framework as layers stacked from guidance to enforcement. AAMI and AORN write what good practice looks like . The CDC supplies the scientific rationale (the Spaulding classification that decides whether an item needs sterilization, high-level disinfection, or low-level disinfection). The FDA controls the devices and the IFUs that flow into the department. OSHA protects the people doing the work. CMS sets the financial conditions a hospital must meet, and TJC performs the survey that verifies it all — converting voluntary standards into accreditation requirements with real consequences.

A single deficiency, such as an unavailable IFU at the point of use, can simultaneously be a TJC citation, a CMS Condition-of-Participation problem, and an FDA compliance gap.

High-Yield Exam Distinctions

AAMI publishes standards; it does not enforce them. Enforcement comes from regulators and accreditors.

TJC accredits; CMS regulates. Deemed status is the bridge between them.

OSHA protects workers, the FDA protects patients/devices. A sharps-injury question points to OSHA; a recall or IFU question points to the FDA.

CDC defines Spaulding; AAMI operationalizes sterilization. A classification question is CDC; a steam-cycle parameter question is AAMI ST79.

Practical Takeaway

The technician who can name the right body for a given question — and recognize that a standard becomes mandatory the moment a regulator or accreditor adopts it — will handle both the exam's regulatory items and a real survey. When any two requirements collide, the safe and defensible answer is always to follow the most stringent one, document the rationale, and escalate the conflict to the SPD manager and infection-prevention team rather than improvising at the workstation.