Study guide

6.3 Types of Data and Measurement Scales

ASQ Certified Six Sigma Black Belt CSSBB

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Introduction & CSSBB Exam Strategy

1.1 CSSBB Exam Format, Scoring, and Testing Windows 1.2 Eligibility, Project Affidavits, Application, and Recertification 1.3 Open-Book Strategy, Reference Materials, and a 16-Week Study Plan

2 Chapter 2: Organization-Wide Planning and Deployment

2.1 Fundamentals of Six Sigma and Lean Methodologies 2.2 Selecting the Right Methodology: DMAIC, DFSS, and Lean 2.3 Business Systems, Processes, and Stakeholder Relationships 2.4 Strategic Planning and Deployment of Six Sigma Initiatives 2.5 Six Sigma Roles and Responsibilities 2.6 Organizational Barriers and Common Causes of Six Sigma Failure 2.7 Change Management: Stakeholder Analysis, Readiness, and Communication

3 Chapter 3: Organizational Process Management and Measures

3.1 Impact of Six Sigma Projects on Customers, Suppliers, and Stakeholders 3.2 Benchmarking Types and Performance Goal Setting 3.3 Performance Measures: Balanced Scorecard, KPIs, KBIs, OKRs, and Line of Sight 3.4 Leading and Lagging Indicators and Performance Dashboards 3.5 Financial Measures: Revenue Growth, Margin, NPV, ROI, and Cost-Benefit Analysis 3.6 Cost of Poor Quality and Hard versus Soft Savings

4 Chapter 4: Team Management

4.1 Team Types and Constraints 4.2 Team Roles, Responsibilities, and Member Selection 4.3 Team Success Factors and Ground Rules 4.4 Motivational Techniques and Overcoming Demotivators 4.5 Stages of Team Development and Conflict Resolution 4.6 Team Communication Plans 4.7 Team Leadership Models: Direct, Coach, Support, and Delegate 4.8 Group Behaviors, Conflict Resolution, and Meeting Management 4.9 Facilitation Techniques and Team Decision-Making Methods 4.10 Team Training: Needs Assessment, Delivery, and Evaluation

5 Chapter 5: Define Phase

5.1 Customer Identification and Segmentation 5.2 Customer Data Collection: Methods, Validity, and Reliability 5.3 Customer Requirements: CTX, CTQ Trees, and Operational Definitions 5.4 The Kano Model and Quality Function Deployment 5.5 SIPOC and Process Mapping 5.6 Business Case Justification 5.7 The Project Charter and the Problem Statement 5.8 Project Scope and Boundaries 5.9 SMART Goals and Project Performance Measurements 5.10 Project Charter Reviews and Toll-Gate Governance 5.11 Project Management Tools: Gantt Charts, Toll-Gate Reviews, WBS, and RACI 5.12 Analytical Tools Used Throughout the DMAIC Cycle

6 Chapter 6: Measure Phase

6.1 Process Flow Metrics and the Hidden Factory 6.2 Process Analysis Tools and Value Stream Mapping 6.3 Types of Data and Measurement Scales 6.4 Sampling Concepts, Methods, and Sample Size for Estimation 6.5 Data Collection Plans and Common Pitfalls 6.6 Gage R&R for Variable Measurement Systems 6.7 Attribute Agreement Analysis and Audit MSA 6.8 Measurement Systems Across the Organization, and Metrology 6.9 Population Parameters, Sample Statistics, and Valid Statistical Conclusions 6.10 Descriptive Statistics: Central Tendency, Dispersion, and Shape 6.11 Graphical Methods for Exploratory Data Analysis 6.12 Probability Concepts, Common Distributions, and the Central Limit Theorem 6.13 Additional Distributions: Hypergeometric, Exponential, Lognormal, Weibull, and Bivariate 6.14 Process Capability and Performance Indices 6.15 Capability Studies, Attributes Capability, Yield Metrics, and Long-Term Capability

7 Chapter 7: Analyze Phase

7.1 The Correlation Coefficient, Its Confidence Interval, and Causation 7.2 Linear Regression and Residual Analysis 7.3 Multivariate Tools: Factor Analysis, Discriminant Analysis, and MANOVA 7.4 Hypothesis Testing Terminology, Errors, and Single-Sample Tests 7.5 Statistical Versus Practical Significance 7.6 Sample Size for Hypothesis Tests 7.7 Point Estimates, Confidence, Prediction, and Tolerance Intervals 7.8 Tests for Means, Variances, and Proportions 7.9 Analysis of Variance 7.10 Chi-Square Goodness-of-Fit and Tests of Independence 7.11 Types of Risk and Failure Mode and Effects Analysis 7.12 Gap Analysis and Root Cause Analysis 7.13 Waste Analysis: The Seven Classic Wastes and Resource Under-Utilization

8 Chapter 8: Improve Phase

8.1 Design of Experiments: Objectives, Terminology, and Effects 8.2 DOE Design Principles: Randomization, Blocking, Replication, and Resolution 8.3 Planning and Evaluating Designed Experiments 8.4 One-Factor Experiments: Completely Randomized, Randomized Block, and Latin Square Designs 8.5 Full Factorial Experiments and Design Selection 8.6 Two-Level Fractional Factorial Experiments and Confounding 8.7 Response Surface Methodology and Optimization 8.8 Waste Elimination: Pull Systems, Kanban, 5S, and Poka-Yoke 8.9 Cycle-Time Reduction: Continuous Flow, SMED, and Heijunka 8.10 Kaizen, Kaizen Blitz, Theory of Constraints, and OEE 8.11 Implementation Planning, Piloting, and Solution Selection

9 Chapter 9: Control Phase

9.1 SPC Objectives, Variable Selection, and Rational Subgrouping 9.2 Control Charts for Variables Data 9.3 Control Charts for Attributes Data 9.4 Short-Run SPC and Moving Average Charts 9.5 Control Chart Analysis: Common Cause, Special Cause, and Run Rules 9.6 Total Productive Maintenance and Visual Controls 9.7 Measurement System Reanalysis 9.8 Control Plan Development and Process Owner Handoff 9.9 Lessons Learned, Documentation, and Training for Sustainment 9.10 Ongoing Evaluation of the Improved Process

10 Chapter 10: Design for Six Sigma (DFSS)

10.1 DFSS Frameworks: DMADV, DMADOV, and Design Transfer 10.2 Design for X (DFX) 10.3 Robust Design, Parameter Design, and Verification 10.4 Tolerance Design and Statistical Tolerancing

6.3 Types of Data and Measurement Scales

Key Takeaways Explain This Topic AI

Qualitative data describes categories; quantitative data measures amounts, and splits into discrete counts and continuous measurements.

The four measurement scales are nominal, ordinal, interval, and ratio, in increasing order of information content.

Only ratio scales have a true zero, so only ratio data supports meaningful ratios such as 'twice as long'.

Continuous data requires far smaller samples than attribute data to detect the same change, so convert to attribute form only when the process genuinely is pass or fail.

Ordinal data such as a satisfaction rating has ordered categories but unequal intervals, so computing a mean of ordinal ratings is technically improper even though it is common practice.

Last updated: August 2026

The primary split

Class Definition Examples Analysis implications

Qualitative (categorical) Describes a category or attribute Defect type, supplier, shift, pass/fail Counts and proportions; chi-square tests; p, np, c, u charts

Quantitative discrete Counts of whole events; cannot be subdivided meaningfully Defects per unit, calls per hour, scratches per panel Poisson or binomial models; c and u charts

Quantitative continuous (variable) Measurements on a continuum, limited only by gauge resolution Length, mass, time, temperature, pressure Normal-theory methods; t, F, ANOVA; X-bar/R, X-bar/s, ImR charts

The continuous/discrete boundary is occasionally subtle. Money is formally discrete (there is a

smallest unit) but is treated as continuous because the increments are tiny relative to the range.

Conversely, a count of defects with a range of 0 to 3 must be treated as discrete no matter how the

data is stored.

The four measurement scales

  • Scale Properties Permissible statistics Examples
  • Nominal Categories with no order Mode, frequency, chi-square Defect type, machine ID, colour, region

Ordinal Ordered categories, unequal or unknown intervals Median, percentiles, rank tests Likert ratings, severity 1-5, hardness scales, first/second/third

Interval Ordered, equal intervals, arbitrary zero Mean, standard deviation, differences Celsius and Fahrenheit temperature, calendar dates, IQ scores

Ratio Ordered, equal intervals, true zero All of the above plus ratios and coefficient of variation Length, mass, time, count, kelvin temperature, cost

Each scale contains all the properties of those above it plus one more, so information increases down

the table.

  • The true-zero test
  • The distinguishing feature of a ratio scale is a zero that means "none of the quantity". This is what

licenses ratio statements.

40 C is not twice as hot as 20 C, because 0 C is the freezing point of water rather than the

absence of thermal energy. Celsius is interval.

400 K is twice 200 K, because 0 K is the absence of thermal energy. Kelvin is ratio.

A 40-minute cycle time is twice a 20-minute cycle time, because zero minutes means no time

elapsed. Time is ratio.

The practical consequence is that coefficient of variation , C V = σ / μ CV = \sigma / \mu C V = σ / μ , and percentage

change are meaningful only on ratio scales. Reporting that a temperature "increased 25%" is

meaningless if the units are Celsius.

  • Ordinal data and the mean
  • Ordinal categories are ordered but the gaps between them are not known to be equal: the distance from
  • "very dissatisfied" to "dissatisfied" is not necessarily the same as from "satisfied" to "very
  • satisfied". Strictly, the mean of ordinal ratings is not defined, and the median or the distribution

across categories should be reported instead.

  • In practice, Likert data is frequently averaged and the exam may accept that convention, but the
  • defensible analysis reports the median and the full distribution, and uses non-parametric tests --

Mann-Whitney, Kruskal-Wallis, Wilcoxon -- rather than t-tests and ANOVA when comparing ordinal groups.

Why the classification drives everything

  • Decision Continuous data Attribute data
  • Control chart X-bar/R, X-bar/s, individuals and moving range p, np, c, u
  • Capability index Cp, Cpk, Pp, Ppk Process sigma from DPMO or proportion defective
  • Two-group comparison Two-sample t-test Two-proportion test or chi-square
  • Multi-group comparison ANOVA Chi-square test of independence
  • Relationship between two variables Correlation, regression Contingency table, logistic regression
  • Typical sample size to detect a moderate shift 25 to 50 300 to 1,000+
  • That last row is the reason continuous data is preferred wherever a choice exists. Detecting a change
  • in a proportion around 5% with reasonable power requires several hundred observations per group;
  • detecting an equivalent shift in a continuous mean typically requires a few dozen. Attribute data
  • records only whether the unit crossed a line; continuous data records how far it was from the line, and

that distance is information you have already paid to collect.

  • Converting between types
  • Continuous to attribute is a one-way loss. Recording "shaft diameter = 20.08 mm" and then storing

only "in specification: yes" discards the information that the process is running near the upper limit.

Wherever the underlying characteristic is measurable, capture the measurement and apply the

specification afterwards during analysis.

Attribute to continuous is generally impossible, but sometimes a genuinely continuous surrogate

exists behind an apparent attribute:

  • Apparent attribute Continuous surrogate
  • Leak: pass/fail Leak rate in cc per minute
  • Late: yes/no Hours early or late relative to promise
  • Colour match: acceptable/not Delta-E colour difference
  • Weld: good/bad Peel strength in newtons
  • Form complete: yes/no Number of fields incorrect, or time to correct
  • Finding the surrogate is one of the highest-value moves available in the Measure phase, because it can

cut the required sample size by an order of magnitude.

Classification worksheet

For any characteristic, answer in order:

Is it a category or a quantity? Category means qualitative.

If a quantity, can it take any value between two points, limited only by the gauge? Yes means

continuous; no means discrete.

Which scale? Ordered? Equal intervals? True zero?

Given the answers, which chart, which index, which test, and what sample size?