Study guide
3.3 Performance Measures: Balanced Scorecard, KPIs, KBIs, OKRs, and Line of Sight
ASQ Certified Six Sigma Black Belt CSSBB
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction & CSSBB Exam Strategy
1.1 CSSBB Exam Format, Scoring, and Testing Windows 1.2 Eligibility, Project Affidavits, Application, and Recertification 1.3 Open-Book Strategy, Reference Materials, and a 16-Week Study Plan
2 Chapter 2: Organization-Wide Planning and Deployment
2.1 Fundamentals of Six Sigma and Lean Methodologies 2.2 Selecting the Right Methodology: DMAIC, DFSS, and Lean 2.3 Business Systems, Processes, and Stakeholder Relationships 2.4 Strategic Planning and Deployment of Six Sigma Initiatives 2.5 Six Sigma Roles and Responsibilities 2.6 Organizational Barriers and Common Causes of Six Sigma Failure 2.7 Change Management: Stakeholder Analysis, Readiness, and Communication
3 Chapter 3: Organizational Process Management and Measures
3.1 Impact of Six Sigma Projects on Customers, Suppliers, and Stakeholders 3.2 Benchmarking Types and Performance Goal Setting 3.3 Performance Measures: Balanced Scorecard, KPIs, KBIs, OKRs, and Line of Sight 3.4 Leading and Lagging Indicators and Performance Dashboards 3.5 Financial Measures: Revenue Growth, Margin, NPV, ROI, and Cost-Benefit Analysis 3.6 Cost of Poor Quality and Hard versus Soft Savings
4 Chapter 4: Team Management
4.1 Team Types and Constraints 4.2 Team Roles, Responsibilities, and Member Selection 4.3 Team Success Factors and Ground Rules 4.4 Motivational Techniques and Overcoming Demotivators 4.5 Stages of Team Development and Conflict Resolution 4.6 Team Communication Plans 4.7 Team Leadership Models: Direct, Coach, Support, and Delegate 4.8 Group Behaviors, Conflict Resolution, and Meeting Management 4.9 Facilitation Techniques and Team Decision-Making Methods 4.10 Team Training: Needs Assessment, Delivery, and Evaluation
5 Chapter 5: Define Phase
5.1 Customer Identification and Segmentation 5.2 Customer Data Collection: Methods, Validity, and Reliability 5.3 Customer Requirements: CTX, CTQ Trees, and Operational Definitions 5.4 The Kano Model and Quality Function Deployment 5.5 SIPOC and Process Mapping 5.6 Business Case Justification 5.7 The Project Charter and the Problem Statement 5.8 Project Scope and Boundaries 5.9 SMART Goals and Project Performance Measurements 5.10 Project Charter Reviews and Toll-Gate Governance 5.11 Project Management Tools: Gantt Charts, Toll-Gate Reviews, WBS, and RACI 5.12 Analytical Tools Used Throughout the DMAIC Cycle
6 Chapter 6: Measure Phase
6.1 Process Flow Metrics and the Hidden Factory 6.2 Process Analysis Tools and Value Stream Mapping 6.3 Types of Data and Measurement Scales 6.4 Sampling Concepts, Methods, and Sample Size for Estimation 6.5 Data Collection Plans and Common Pitfalls 6.6 Gage R&R for Variable Measurement Systems 6.7 Attribute Agreement Analysis and Audit MSA 6.8 Measurement Systems Across the Organization, and Metrology 6.9 Population Parameters, Sample Statistics, and Valid Statistical Conclusions 6.10 Descriptive Statistics: Central Tendency, Dispersion, and Shape 6.11 Graphical Methods for Exploratory Data Analysis 6.12 Probability Concepts, Common Distributions, and the Central Limit Theorem 6.13 Additional Distributions: Hypergeometric, Exponential, Lognormal, Weibull, and Bivariate 6.14 Process Capability and Performance Indices 6.15 Capability Studies, Attributes Capability, Yield Metrics, and Long-Term Capability
7 Chapter 7: Analyze Phase
7.1 The Correlation Coefficient, Its Confidence Interval, and Causation 7.2 Linear Regression and Residual Analysis 7.3 Multivariate Tools: Factor Analysis, Discriminant Analysis, and MANOVA 7.4 Hypothesis Testing Terminology, Errors, and Single-Sample Tests 7.5 Statistical Versus Practical Significance 7.6 Sample Size for Hypothesis Tests 7.7 Point Estimates, Confidence, Prediction, and Tolerance Intervals 7.8 Tests for Means, Variances, and Proportions 7.9 Analysis of Variance 7.10 Chi-Square Goodness-of-Fit and Tests of Independence 7.11 Types of Risk and Failure Mode and Effects Analysis 7.12 Gap Analysis and Root Cause Analysis 7.13 Waste Analysis: The Seven Classic Wastes and Resource Under-Utilization
8 Chapter 8: Improve Phase
8.1 Design of Experiments: Objectives, Terminology, and Effects 8.2 DOE Design Principles: Randomization, Blocking, Replication, and Resolution 8.3 Planning and Evaluating Designed Experiments 8.4 One-Factor Experiments: Completely Randomized, Randomized Block, and Latin Square Designs 8.5 Full Factorial Experiments and Design Selection 8.6 Two-Level Fractional Factorial Experiments and Confounding 8.7 Response Surface Methodology and Optimization 8.8 Waste Elimination: Pull Systems, Kanban, 5S, and Poka-Yoke 8.9 Cycle-Time Reduction: Continuous Flow, SMED, and Heijunka 8.10 Kaizen, Kaizen Blitz, Theory of Constraints, and OEE 8.11 Implementation Planning, Piloting, and Solution Selection
9 Chapter 9: Control Phase
9.1 SPC Objectives, Variable Selection, and Rational Subgrouping 9.2 Control Charts for Variables Data 9.3 Control Charts for Attributes Data 9.4 Short-Run SPC and Moving Average Charts 9.5 Control Chart Analysis: Common Cause, Special Cause, and Run Rules 9.6 Total Productive Maintenance and Visual Controls 9.7 Measurement System Reanalysis 9.8 Control Plan Development and Process Owner Handoff 9.9 Lessons Learned, Documentation, and Training for Sustainment 9.10 Ongoing Evaluation of the Improved Process
10 Chapter 10: Design for Six Sigma (DFSS)
10.1 DFSS Frameworks: DMADV, DMADOV, and Design Transfer 10.2 Design for X (DFX) 10.3 Robust Design, Parameter Design, and Verification 10.4 Tolerance Design and Statistical Tolerancing
3.3 Performance Measures: Balanced Scorecard, KPIs, KBIs, OKRs, and Line of Sight
Key Takeaways Explain This Topic AI
A key performance indicator measures an outcome; a key behavior indicator measures the human behaviour believed to drive that outcome.
Objectives and key results pair a qualitative objective with three to five measurable key results and are set on a quarterly cadence, deliberately stretched so full attainment is not expected.
The balanced scorecard's four perspectives are financial, customer, internal business process, and learning and growth.
Customer loyalty metrics include Net Promoter Score, retention rate, repurchase rate, and customer lifetime value; NPS is the percentage of promoters minus the percentage of detractors.
Line of sight means every operator-level measure can be traced upward through a documented causal chain to a strategic objective.
Last updated: August 2026
Four instruments, four questions
Instrument Question it answers Typical cadence Owner
Balanced scorecard Are we healthy across all four dimensions of the business? Monthly or quarterly Executive team
- KPI Did the outcome we care about actually move? Daily to monthly Process owner
- KBI Are people doing the things that produce the outcome? Daily to weekly Supervisor
- OKR What ambitious, time-boxed shift are we attempting this quarter? Quarterly Objective owner
- Using one where another belongs is the common failure. An organization that tracks only KPIs learns
- about failure after it happens; one that tracks only KBIs measures activity and can miss that the
activity is not producing the outcome.
- Key performance indicators
- A KPI is an outcome measure tied to a strategic or process objective. Good KPIs share five
- properties: they are quantitative, owned by a named person, defined operationally, collected at a
frequency that supports action, and small in number. A department with 40 KPIs has no KPIs.
The most useful discipline is pairing. Any single KPI can be gamed by degrading something it does not
measure, so KPIs travel in counter-balanced pairs :
- Primary KPI Counter-balancing KPI Behaviour it prevents
- Units produced per shift First-pass yield Running through marginal conditions to hit volume
- Average handling time First-contact resolution Ending calls quickly without solving the problem
- Inventory turns On-time in-full delivery Starving the process of buffer and missing shipments
- Cost per unit Warranty claims per thousand Cheapening inputs at the customer's expense
- Key behavior indicators
- A KBI measures the observable behaviour believed to cause the outcome. Where a KPI is lagging by
construction, a KBI is available immediately and is directly coachable.
- Examples: percentage of shifts where the layered process audit was completed; percentage of control
- chart out-of-control signals with a documented reaction; percentage of gemba walks conducted as
scheduled; percentage of andon pulls responded to within the target time.
- KBIs matter to Black Belts because control plans live or die on behaviour . A control plan that
- specifies a reaction to an out-of-control point is only real if someone measures whether the reaction
happens. The KBI is the sustainment measure for the control plan.
One caution: a KBI is a hypothesis. It asserts that behaviour causes outcome. If the KBI is green for
three months and the KPI has not moved, the hypothesis is wrong and the KBI must change.
- Objectives and key results
- OKRs pair a qualitative, directional objective with three to five quantitative key
results that measure whether the objective was reached.
Objective: Make first-pass quality a competitive advantage in the moulding cell.
KR1: Raise first-pass yield from 91.4% to 97.0%.
KR2: Reduce scrap cost per thousand parts from $38.10 to $18.00.
KR3: Cut mean time to detect an out-of-control condition from 46 minutes to under 10 minutes.
- Three features distinguish OKRs from KPIs. They are time-boxed , normally quarterly. They are
- deliberately stretched , so 70% attainment is often treated as success and consistent 100%
- attainment signals targets set too low. And they are usually not tied to compensation , precisely
so that stretch remains safe to attempt.
- KPIs and OKRs coexist: KPIs are the standing health measures of a process, OKRs are the temporary
- focus for a period of change. A DMAIC project maps naturally onto an OKR, with the project's primary
metric as KR1.
- Balanced scorecard perspectives
- The balanced scorecard exists because financial measures alone are lagging and incomplete. Its four
perspectives, and the causal logic that links them:
- Perspective Question Six Sigma measures that fit
- Financial How do we appear to shareholders? COPQ reduction, project savings, margin, ROI
- Customer How do customers see us? NPS, retention, on-time in-full, CTQ defect rate
- Internal business process What must we excel at? Cpk, DPMO, RTY, cycle time, OEE
- Learning and growth Can we keep improving? Belts trained and active, control plans owned, projects per belt
- The causal chain runs upward: learning and growth enables better internal processes, which produce
customer outcomes, which produce financial results. That chain is exactly what a strategy map draws, and it is the mechanism by which a Black Belt argues that a process project deserves funding.
Customer loyalty metrics
Metric Definition Reading
Net Promoter Score % promoters (9-10) minus % detractors (0-6) on an 11-point recommendation scale Range -100 to +100; passives (7-8) are excluded from both terms
- Retention rate Customers retained over a period divided by customers at the start Complement of churn
- Repurchase rate Share of customers who buy again within a defined window Behavioural rather than attitudinal
Customer lifetime value Discounted margin expected over the relationship Converts loyalty into money for project justification
- NPS is the one most often mis-stated. It is a difference of percentages, not an average , passives
- are excluded from the calculation but remain in the denominator, and the result is a number between
-100 and +100 rather than a percentage.
- Line of sight
- Line of sight means an operator can name the strategic objective their measure serves, and an
- executive can trace a strategic objective down to the process measures that move it. Build it in four
steps:
State the strategic objective in measurable terms.
Identify the process outputs ( Y Y Y s) that determine it.
Identify the controllable process inputs ( X X X s) that determine those outputs.
Assign each X X X a measure, an owner, a frequency, and a reaction rule.
The test of a real line of sight is a two-way conversation. Ask an operator why their measure
matters; ask an executive which shop-floor measure would move first if their objective were failing.
If either cannot answer, the cascade is decorative.