Study guide
3.6 Cost of Poor Quality and Hard versus Soft Savings
ASQ Certified Six Sigma Black Belt CSSBB
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction & CSSBB Exam Strategy
1.1 CSSBB Exam Format, Scoring, and Testing Windows 1.2 Eligibility, Project Affidavits, Application, and Recertification 1.3 Open-Book Strategy, Reference Materials, and a 16-Week Study Plan
2 Chapter 2: Organization-Wide Planning and Deployment
2.1 Fundamentals of Six Sigma and Lean Methodologies 2.2 Selecting the Right Methodology: DMAIC, DFSS, and Lean 2.3 Business Systems, Processes, and Stakeholder Relationships 2.4 Strategic Planning and Deployment of Six Sigma Initiatives 2.5 Six Sigma Roles and Responsibilities 2.6 Organizational Barriers and Common Causes of Six Sigma Failure 2.7 Change Management: Stakeholder Analysis, Readiness, and Communication
3 Chapter 3: Organizational Process Management and Measures
3.1 Impact of Six Sigma Projects on Customers, Suppliers, and Stakeholders 3.2 Benchmarking Types and Performance Goal Setting 3.3 Performance Measures: Balanced Scorecard, KPIs, KBIs, OKRs, and Line of Sight 3.4 Leading and Lagging Indicators and Performance Dashboards 3.5 Financial Measures: Revenue Growth, Margin, NPV, ROI, and Cost-Benefit Analysis 3.6 Cost of Poor Quality and Hard versus Soft Savings
4 Chapter 4: Team Management
4.1 Team Types and Constraints 4.2 Team Roles, Responsibilities, and Member Selection 4.3 Team Success Factors and Ground Rules 4.4 Motivational Techniques and Overcoming Demotivators 4.5 Stages of Team Development and Conflict Resolution 4.6 Team Communication Plans 4.7 Team Leadership Models: Direct, Coach, Support, and Delegate 4.8 Group Behaviors, Conflict Resolution, and Meeting Management 4.9 Facilitation Techniques and Team Decision-Making Methods 4.10 Team Training: Needs Assessment, Delivery, and Evaluation
5 Chapter 5: Define Phase
5.1 Customer Identification and Segmentation 5.2 Customer Data Collection: Methods, Validity, and Reliability 5.3 Customer Requirements: CTX, CTQ Trees, and Operational Definitions 5.4 The Kano Model and Quality Function Deployment 5.5 SIPOC and Process Mapping 5.6 Business Case Justification 5.7 The Project Charter and the Problem Statement 5.8 Project Scope and Boundaries 5.9 SMART Goals and Project Performance Measurements 5.10 Project Charter Reviews and Toll-Gate Governance 5.11 Project Management Tools: Gantt Charts, Toll-Gate Reviews, WBS, and RACI 5.12 Analytical Tools Used Throughout the DMAIC Cycle
6 Chapter 6: Measure Phase
6.1 Process Flow Metrics and the Hidden Factory 6.2 Process Analysis Tools and Value Stream Mapping 6.3 Types of Data and Measurement Scales 6.4 Sampling Concepts, Methods, and Sample Size for Estimation 6.5 Data Collection Plans and Common Pitfalls 6.6 Gage R&R for Variable Measurement Systems 6.7 Attribute Agreement Analysis and Audit MSA 6.8 Measurement Systems Across the Organization, and Metrology 6.9 Population Parameters, Sample Statistics, and Valid Statistical Conclusions 6.10 Descriptive Statistics: Central Tendency, Dispersion, and Shape 6.11 Graphical Methods for Exploratory Data Analysis 6.12 Probability Concepts, Common Distributions, and the Central Limit Theorem 6.13 Additional Distributions: Hypergeometric, Exponential, Lognormal, Weibull, and Bivariate 6.14 Process Capability and Performance Indices 6.15 Capability Studies, Attributes Capability, Yield Metrics, and Long-Term Capability
7 Chapter 7: Analyze Phase
7.1 The Correlation Coefficient, Its Confidence Interval, and Causation 7.2 Linear Regression and Residual Analysis 7.3 Multivariate Tools: Factor Analysis, Discriminant Analysis, and MANOVA 7.4 Hypothesis Testing Terminology, Errors, and Single-Sample Tests 7.5 Statistical Versus Practical Significance 7.6 Sample Size for Hypothesis Tests 7.7 Point Estimates, Confidence, Prediction, and Tolerance Intervals 7.8 Tests for Means, Variances, and Proportions 7.9 Analysis of Variance 7.10 Chi-Square Goodness-of-Fit and Tests of Independence 7.11 Types of Risk and Failure Mode and Effects Analysis 7.12 Gap Analysis and Root Cause Analysis 7.13 Waste Analysis: The Seven Classic Wastes and Resource Under-Utilization
8 Chapter 8: Improve Phase
8.1 Design of Experiments: Objectives, Terminology, and Effects 8.2 DOE Design Principles: Randomization, Blocking, Replication, and Resolution 8.3 Planning and Evaluating Designed Experiments 8.4 One-Factor Experiments: Completely Randomized, Randomized Block, and Latin Square Designs 8.5 Full Factorial Experiments and Design Selection 8.6 Two-Level Fractional Factorial Experiments and Confounding 8.7 Response Surface Methodology and Optimization 8.8 Waste Elimination: Pull Systems, Kanban, 5S, and Poka-Yoke 8.9 Cycle-Time Reduction: Continuous Flow, SMED, and Heijunka 8.10 Kaizen, Kaizen Blitz, Theory of Constraints, and OEE 8.11 Implementation Planning, Piloting, and Solution Selection
9 Chapter 9: Control Phase
9.1 SPC Objectives, Variable Selection, and Rational Subgrouping 9.2 Control Charts for Variables Data 9.3 Control Charts for Attributes Data 9.4 Short-Run SPC and Moving Average Charts 9.5 Control Chart Analysis: Common Cause, Special Cause, and Run Rules 9.6 Total Productive Maintenance and Visual Controls 9.7 Measurement System Reanalysis 9.8 Control Plan Development and Process Owner Handoff 9.9 Lessons Learned, Documentation, and Training for Sustainment 9.10 Ongoing Evaluation of the Improved Process
10 Chapter 10: Design for Six Sigma (DFSS)
10.1 DFSS Frameworks: DMADV, DMADOV, and Design Transfer 10.2 Design for X (DFX) 10.3 Robust Design, Parameter Design, and Verification 10.4 Tolerance Design and Statistical Tolerancing
3.6 Cost of Poor Quality and Hard versus Soft Savings
Key Takeaways Explain This Topic AI
The four COPQ categories are prevention, appraisal, internal failure, and external failure; prevention and appraisal are costs of conformance, the two failure categories are costs of non-conformance.
External failure cost is the most expensive category because it includes warranty, recall, liability, and lost customers.
Hard savings appear as a measurable change in the profit and loss statement; soft savings are cost avoidance or capacity release that never reaches a financial statement line.
The 1-10-100 rule expresses the escalating cost of a defect found at prevention, at inspection, and at the customer.
COPQ commonly runs 15% to 25% of revenue in an organization operating around three sigma, and most of it is hidden below the visible scrap and rework line.
Last updated: August 2026
- Defining cost of poor quality
- Cost of poor quality (COPQ) is the cost that would vanish if every process performed right the
- first time, every time. It is a superset of scrap and rework: it includes the inspection you perform
- because you do not trust the process, the expediting you pay because the first shipment was wrong,
and the customers who did not come back.
- COPQ is the Black Belt's principal argument. It converts a quality problem into a financial problem
- and reframes improvement as recovering money already being spent rather than requesting new
investment.
The prevention-appraisal-failure model
Category Definition Examples
Prevention Cost of preventing defects from occurring Design reviews, DFMEA and PFMEA, supplier development, training, error-proofing, process capability studies
Appraisal Cost of assessing whether output conforms Incoming inspection, in-process inspection, final test, gauge calibration, audits, MSA studies
Internal failure Cost of defects found before the customer receives the product Scrap, rework, re-inspection, downgrading, downtime caused by defects, yield loss
External failure Cost of defects found after delivery Warranty claims, returns, field service, recalls, liability, concessions, lost customers
- Prevention and appraisal together are costs of conformance -- money spent deliberately to achieve
- quality. Internal and external failure together are costs of non-conformance -- money lost
because quality was not achieved.
- The classic relationship is that spending on prevention reduces failure cost by more than it costs,
- and that appraisal spending has diminishing returns because inspection cannot create quality it can
- only detect its absence. A plant whose quality budget is 80% appraisal and 5% prevention is paying to
sort rather than paying to fix.
The 1-10-100 escalation
The cost of a defect grows by roughly an order of magnitude at each stage it escapes.
- Where the defect is caught Relative cost Why
- Prevented at design or setup 1 Change a drawing, adjust a parameter
- Detected internally at inspection 10 Material and labour already consumed; rework or scrap
- Detected by the customer 100 Warranty, freight, field service, investigation, and reputation
- The rule is a heuristic, not a measured constant, but the ordering is reliable and it is why external
failure dominates most real COPQ studies.
The iceberg: visible versus hidden COPQ
Most organizations measure only the top of the iceberg because those costs already have accounts.
Visible (measured today): scrap, rework labour, warranty claims, returns, inspection headcount.
- Hidden (rarely measured): excess inventory held as protection against defects, expediting and
- premium freight, engineering time spent on corrective action, extra capacity built to absorb yield
- loss, order cancellations, customer defections, management time in quality escalations, and
opportunity cost of capacity consumed producing defects.
- Hidden costs typically exceed visible costs by a wide margin. In an organization running near three
- sigma, total COPQ commonly falls in the 15% to 25% of revenue range, while the visible portion
booked to quality accounts might be 3% to 5%.
Hard versus soft savings
This distinction is named explicitly in the Body of Knowledge and is a reliable exam topic.
Hard savings Soft savings
Definition A measurable change in the profit and loss statement Cost avoidance, cost reduction, or capacity release that does not change a P&L line
Test Would the controller book it? Real benefit, but no line item moves
Examples Material cost eliminated, headcount removed or redeployed against an open requisition, scrap expense reduced, freight premium eliminated, warranty accrual reduced Hours freed but not removed, capacity released without additional sales, avoided future costs, avoided potential fines, cycle-time reduction with no revenue effect
Reporting rule Counts toward validated project benefit Reported separately, never mixed into the hard number
Two frequent errors:
- Counting freed labour hours as hard savings. Saving 0.4 of a person's time is only a hard
- saving if 0.4 of a person's cost actually leaves the organization -- through a removed position,
an unfilled requisition, or eliminated overtime. Otherwise it is soft.
Counting released capacity as revenue. Freeing 300 machine hours only becomes a hard saving if
those hours are sold or if they let you cancel outsourced work.
- Cost avoidance deserves its own note. Avoiding a future cost that has not yet been incurred is
- genuine value -- avoiding a recall, avoiding a capital expansion, avoiding a regulatory penalty -- but
- because the counterfactual cannot be observed, it is soft by convention. Report it, quantify it,
label it.
- Worked example
- A moulding line produces 1.2 million parts per year. Baseline scrap is 4.2% at a material and
- conversion cost of $2.85 per part. Rework runs 1.1% at $1.40 per part. Premium freight to cover late
- shipments caused by yield loss runs $46,000 per year. Two inspectors at $58,000 fully loaded exist
solely because the process is not trusted.
Scrap: 1,200,000 × 0.042 × $ 2.85 = $ 143,640 1{,}200{,}000 \times 0.042 \times \text{\textdollar}2.85 = \text{\textdollar}143{,}640 1 , 200 , 000 × 0.042 × $ 2.85 = $ 143 , 640 (internal failure)
Rework: 1,200,000 × 0.011 × $ 1.40 = $ 18,480 1{,}200{,}000 \times 0.011 \times \text{\textdollar}1.40 = \text{\textdollar}18{,}480 1 , 200 , 000 × 0.011 × $ 1.40 = $ 18 , 480 (internal failure)
- Premium freight: 46,000 46{,}000 46 , 000 (internal failure, hidden)
- Inspection labour: 116,000 116{,}000 116 , 000 (appraisal)
- Total identified COPQ: $324,120
A project that halves scrap and rework and eliminates premium freight yields 0.5 ( 143,640 + 18,480 ) + 46,000 = $ 127,060 0.5(143{,}640 + 18{,}480) + 46{,}000 = \text{\textdollar}127{,}060 0.5 ( 143 , 640 + 18 , 480 ) + 46 , 000 = $ 127 , 060 of hard savings, because material and freight
- spend genuinely falls. Removing one inspector position saves a further $58,000 hard only if the
- position is actually eliminated ; if the inspector is redeployed to another area that had an open
requisition, it is still hard, but if they simply have less to do, it is soft.