Study guide

8.1 Measures of Central Tendency & Dispersion

CSSC Certified Six Sigma Green Belt Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Six Sigma Overview & Exam Fundamentals

1.1 CSSC Certification Overview, Exam Structure & Body of Knowledge 1.2 History & Evolution of Six Sigma 1.3 Six Sigma Organizational Roles & Belts Hierarchy 1.4 The DMAIC Methodology Architecture vs. DMADV / DFSS 1.5 Other Process Improvement & Quality Methods, and When to Choose Six Sigma

2 Chapter 2: Quality Fundamentals & Defect Metrics

2.1 Critical to Quality (CTQ) Characteristics & VOC Translation 2.2 Defect Metrics: DPU, DPO, DPMO, & the 1.5-Sigma Shift 2.3 First Time Yield (FTY) & Rolled Throughput Yield (RTY) 2.4 Cost of Quality (COQ) & Cost of Poor Quality (COPQ)

3 Chapter 3: Lean Principles & Waste Elimination

3.1 Foundations of Lean & The Toyota Production System (TPS) 3.2 The Eight Wastes: CSSC's Seven Muda, TIMWOODS, and Muri/Mura 3.3 The 5S Visual Workplace Methodology 3.4 Value Stream Mapping (VSM), Cycle Time & Takt Time

4 Chapter 4: Project Selection & Team Management

4.1 Six Sigma Project Selection & Business Case Development 4.2 Project Charter Architecture 4.3 Stakeholder Management & Communication Planning 4.4 Team Dynamics & Tuckman's Team Development Stages 4.5 The 15-Point Project Viability Model & Process-Level Selection

5 Chapter 5: Define Phase & Process Mapping

5.1 High-Level Process Mapping with SIPOC 5.2 Flowcharts, Swimlane Diagrams & Process Value Analysis 5.3 Quality Function Deployment (QFD) & The House of Quality 5.4 Critical to Quality (CTQ) Flowdown & Operational Definitions 5.5 The CSSC Define Toolset: Ground Rules, In/Out of the Box, Is–Is Not & Tollgate Checklists

6 Chapter 6: Measure Phase & Measurement Systems

6.1 Data Types: Continuous (Variable) vs. Discrete (Attribute) Data 6.2 Data Collection Planning & Sampling Strategies 6.3 Measurement System Analysis (MSA) Foundations & Calibration 6.4 Variable & Attribute Gage R&R Studies

7 Chapter 7: Analyze Phase & Root Cause Analysis

7.1 Qualitative Root Cause Tools: 5 Whys & Cause-and-Effect (Fishbone) Diagrams 7.2 Failure Mode and Effects Analysis (FMEA) & RPN Calculation 7.3 Pareto Analysis & The 80/20 Rule 7.4 Graphical Data Exploration: Histograms, Box Plots, & Multi-Vari Charts 7.5 The Root Cause Verification Matrix

8 Chapter 8: Descriptive Statistics & Distributions

8.1 Measures of Central Tendency & Dispersion 8.2 The Normal Distribution & The Empirical Rule (68-95-99.7) 8.3 Standard Normal Distribution, Z-Scores & Probability Calculations 8.4 Common Non-Normal Distributions: Binomial, Poisson & Chi-Square

9 Chapter 9: Inferential Statistics & Hypothesis Testing

9.1 Fundamentals of Hypothesis Testing: Null vs. Alternative, Alpha & Beta Risks 9.2 One-Sample and Two-Sample t-Tests for Means 9.3 Paired t-Tests & Non-Parametric Alternatives 9.4 Analysis of Variance (One-Way & Two-Way ANOVA) & Chi-Square Contingency Tests 9.5 Sample Size Determination for Hypothesis Tests

10 Chapter 10: Correlation, Regression, & Experimentation

10.1 Linear Correlation & Pearson's Correlation Coefficient (r) 10.2 Simple Linear Regression & Coefficient of Determination (R^2) 10.3 Introduction to Design of Experiments (DOE) & Factorial Designs 10.4 Analyzing Experimental Results: Main Effects & Interaction Plots

11 Chapter 11: Improve Phase & Solution Implementation

11.1 Brainstorming, Creative Thinking & Solution Selection Matrices 11.2 Piloting Solutions & Conducting Risk Assessments 11.3 Implementation Planning & Change Management (ADKAR) 11.4 Mistake-Proofing (Poka-Yoke) & Standard Work

12 Chapter 12: Control Phase, SPC, & Process Capability

12.1 Statistical Process Control (SPC) & Shewhart Control Rules 12.2 Variable Control Charts: I-MR, X-bar & R, X-bar & S 12.3 Attribute Control Charts: p, np, c, and u Charts 12.4 Process Capability & Performance Indices: Cp, Cpk, Pp, Ppk 12.5 Communicating Statistical Results to Business Audiences

8.1 Measures of Central Tendency & Dispersion

Key Takeaways Explain This Topic AI

Population parameters are denoted by Greek letters (μ, σ, σ², N) to describe an entire population, whereas sample statistics use Roman letters (x̄, s, s², n) to estimate those parameters from sample data.

The arithmetic mean represents the mathematical center of gravity where the sum of signed deviations equals zero, but it is highly sensitive to extreme outliers; the median represents the 50th percentile and provides a robust measure of central tendency for skewed data.

Sample variance (s²) and sample standard deviation (s) incorporate Bessel's correction by dividing by n - 1 degrees of freedom, eliminating systematic underestimation of the population variance (σ²).

The Interquartile Range (IQR = Q3 - Q1) quantifies the dispersion of the middle 50% of ordered observations and serves as the mathematical foundation for Tukey's boxplot outlier detection fences.

Tukey's outlier detection rule identifies observations falling beyond the Lower Inner Fence (Q1 - 1.5 * IQR) or Upper Inner Fence (Q3 + 1.5 * IQR) as suspected anomalies requiring root-cause investigation rather than arbitrary deletion.

Last updated: September 2026

8.1 Measures of Central Tendency & Dispersion

Core Principle: Descriptive statistics summarize the location and dispersion of process data without drawing broader inferential conclusions. Central tendency measures (mean, median, mode) pinpoint the center of a distribution, while dispersion measures (range, variance, standard deviation, IQR) quantify process spread and variation. Six Sigma practitioners must select metrics based on distribution shape: the mean and standard deviation for symmetrical, bell-shaped data, and the median and interquartile range (IQR) for skewed or outlier-heavy distributions.

The Role of Descriptive Statistics in Six Sigma

In the Measure and Analyze phases of DMAIC, continuous improvement teams collect large volumes of baseline data representing process cycle times, product dimensions, transaction defect counts, or chemical concentrations. Raw data in its unaggregated state is cognitively overwhelming and cannot inform decision-making.

Descriptive statistics provides the mathematical toolkit to condense numerical datasets into concise summary values that describe two fundamental dimensions of process performance:

Location (Central Tendency): Where is the process centered? What is the typical or expected value?

Spread (Dispersion): How much variation exists around that center? Are outputs tightly clustered or widely scattered?

Understanding these two properties allows Green Belts to establish baseline process capability, evaluate alignment against customer specifications (Voice of the Customer), and assess whether observed differences before and after improvements represent true systemic shifts or random noise.

Population Parameters vs. Sample Statistics

A cornerstone concept tested on the CSSC Green Belt examination is the distinction between a population and a sample , along with their corresponding mathematical notations.

Population: The complete, exhaustive collection of all items, units, transactions, or observations of interest in a given study (e.g., every invoice processed this fiscal year, or every machined shaft produced across the lifetime of a production run). A numerical descriptive measurement calculated from an entire population is called a parameter .

Sample: A representative subset or fraction of observations drawn from the population (e.g., 50 randomly selected invoices, or 30 consecutive shafts measured during a shift). A numerical descriptive measurement calculated from sample data is called a statistic .

In industrial Six Sigma projects, measuring the entire population is virtually impossible due to prohibitive economic costs, destructive testing constraints (such as tensile strength testing), or infinite process streams. Consequently, practitioners calculate sample statistics to estimate unknown population parameters .

Descriptive Metric Population Parameter (Greek Notation) Sample Statistic (Roman Notation) Functional Meaning

Data Count / Size N N N (Capital Roman/Greek convention) n n n (Lowercase Roman) Total number of observations evaluated

  • Central Mean μ \mu μ (Mu) x ˉ \bar{x} x ˉ ("x-bar") Arithmetic average of observations
  • Variance σ 2 \sigma^2 σ 2 ("sigma squared") s 2 s^2 s 2 ("s squared") Average squared deviation from the mean
  • Standard Deviation σ \sigma σ (Sigma) s s s (Standard error / s) Dispersion in original units of measure
  • Proportion p p p or P P P p ^ \hat{p} p ^ ​ ("p-hat") Proportion of defective or conforming units

Warning

Exam Warning: On CSSC exams, mixing Greek and Roman notation is an immediate failure point in quantitative questions. When a question provides sample data gathered from a test subgroup, you must compute the sample standard deviation s s s with degrees of freedom n − 1 n - 1 n − 1 , rather than the population standard deviation σ \sigma σ .

Measures of Central Tendency

Central tendency captures the single value that best typifies or summarizes the central location of a dataset. The three primary metrics are the mean , median , and mode . Measures of Central Tendency

  • │
  • ┌────────────────────────┼────────────────────────┐
  • ▼ ▼ ▼
  • Arithmetic Median Mode
  • Mean (50th Percentile) (Peak Frequency)
  • Mathematical Center Positional Center Nominal Center
  • Highly Outlier-Sensitive Robust to Outliers Identifies Multimodality
  • 1. The Arithmetic Mean

The mean is the sum of all individual data values divided by the total number of observations: μ = ∑ i = 1 N X i N (Population) x ˉ = ∑ i = 1 n x i n (Sample) \mu = \frac{\sum_{i=1}^N X_i}{N} \quad \text{(Population)} \qquad \bar{x} = \frac{\sum_{i=1}^n x_i}{n} \quad \text{(Sample)} μ = N ∑ i = 1 N ​ X i ​ ​ (Population) x ˉ = n ∑ i = 1 n ​ x i ​ ​ (Sample)

Mathematical Property: The arithmetic mean serves as the physical "center of gravity" or balance point of a dataset. The sum of signed deviations of all observations from their arithmetic mean is mathematically identically zero: ∑ i = 1 n ( x i − x ˉ ) = 0 \sum_{i=1}^n (x_i - \bar{x}) = 0 i = 1 ∑ n ​ ( x i ​ − x ˉ ) = 0

Vulnerability: The mean incorporates every numerical value into its calculation. Therefore, a single extreme outlier pulls the mean substantially toward the tail, distorting the perceived center of the process.

2. The Median

The median (denoted as x ~ \tilde{x} x ~ or M M M ) is the physical middle value when observations are sorted in ascending numerical order. It divides the distribution into two equal halves, representing the 50th percentile :

Odd Sample Size ( n n n is odd): The median is the unique middle observation located at rank position n + 1 2 \frac{n + 1}{2} 2 n + 1 ​ .

Even Sample Size ( n n n is even): The median is the arithmetic average of the two central observations located at rank positions n 2 \frac{n}{2} 2 n ​ and n 2 + 1 \frac{n}{2} + 1 2 n ​ + 1 .

Robustness: The median is resistant (robust) to extreme outliers and heavy skewness because it depends solely on rank order, not numerical magnitudes. If a hospital emergency department records five patient wait times of 15, 20, 22, 25, and 360 minutes, the median is 22 minutes (accurately reflecting typical experience), whereas the mean is inflated to 88.4 minutes.

3. The Mode

The mode is the most frequently occurring value in a dataset. Unlike the mean and median, the mode can be identified for both quantitative (numerical) and qualitative (attribute/categorical) data:

Unimodal: Exactly one value appears with peak frequency.

Bimodal: Two non-adjacent values share peak frequency.

Multimodal: Three or more values share peak frequency.

No Mode: All observations occur with equal frequency.

Note

DMAIC Diagnostic Value: In Six Sigma root-cause analysis, encountering a bimodal distribution in process cycle times or product dimensions is a critical red flag. It indicates that the dataset is not representing a single homogeneous process, but rather two distinct sub-processes combined (e.g., two different machine operators, two distinct raw material suppliers, day shift vs. night shift, or two parallel manufacturing cavities).

Comparative Selection Guide: Choosing the Right Measure of Center

Distribution Shape Optimal Measure Secondary Metric Rationale

Symmetrical / Bell-Shaped Mean Median (Identical) Mean captures all quantitative information; mean = median = mode in perfect symmetry.

Positively Skewed (Right Tail) Median Mode Mean is dragged upward by high outliers; median reflects true customer experience.

Negatively Skewed (Left Tail) Median Mode Mean is dragged downward by low outliers; median preserves central representation.

Categorical / Attribute Data Mode N/A Mean and median cannot be calculated for non-numeric nominal categories (e.g., defect type).

Bimodal / Mixture Data Investigate Clusters Stratify Data Reporting a single mean or median obscures the dual-peak reality; stratify by root cause.

Measures of Dispersion (Process Variation)

Central tendency describes where a process sits, but Six Sigma is fundamentally about reducing variation . Two processes can possess identical mean cycle times of 30 minutes, yet Process A ranges from 28 to 32 minutes while Process B ranges from 5 to 55 minutes. Process B will generate severe customer dissatisfaction and high defect rates. Measures of dispersion quantify this spread.

1. Range ( R R R )

The range is the simplest measure of dispersion, representing the arithmetic distance between the maximum and minimum observed values: R = X max − X min R = X_{\text{max}} - X_{\text{min}} R = X max ​ − X min ​

Strengths: Intuitive, instant to compute. Heavily utilized in traditional Shewhart control charts (such as X ˉ − R \bar{X}-R X ˉ − R charts) for small subgroups ( n ≤ 8 n \le 8 n ≤ 8 ).

Weaknesses: Completely ignores all intermediate data values and relies exclusively on the two most extreme observations. Range systematically increases as sample size n n n grows, making it unreliable for comparing datasets of unequal size.

2. Variance ( σ 2 \sigma^2 σ 2 and s 2 s^2 s 2 )

Variance measures the average squared deviation of individual data points from their arithmetic mean. Squaring deviations ensures that positive and negative differences do not cancel each other out and penalizes larger deviations more heavily. σ 2 = ∑ i = 1 N ( X i − μ ) 2 N (Population Variance) \sigma^2 = \frac{\sum_{i=1}^N (X_i - \mu)^2}{N} \quad \text{(Population Variance)} σ 2 = N ∑ i = 1 N ​ ( X i ​ − μ ) 2 ​ (Population Variance) s 2 = ∑ i = 1 n ( x i − x ˉ ) 2 n − 1 (Sample Variance with Bessel’s Correction) s^2 = \frac{\sum_{i=1}^n (x_i - \bar{x})^2}{n - 1} \quad \text{(Sample Variance with Bessel's Correction)} s 2 = n − 1 ∑ i = 1 n ​ ( x i ​ − x ˉ ) 2 ​ (Sample Variance with Bessel’s Correction)

Bessel's Correction and Degrees of Freedom ( n − 1 n - 1 n − 1 )

Notice the crucial denominator difference between population variance ( N N N ) and sample variance ( n − 1 n - 1 n − 1 ):

When a sample is drawn, data points tend to cluster closer to their own sample mean x ˉ \bar{x} x ˉ than to the unknown true population mean μ \mu μ .

Dividing the sample sum of squares by n n n creates a downward-biased estimator that systematically underestimates the true population variance.

Dividing by n − 1 n - 1 n − 1 (known as Bessel's correction ) mathematically corrects this bias, rendering s 2 s^2 s 2 an unbiased estimator of σ 2 \sigma^2 σ 2 .

The term n − 1 n - 1 n − 1 represents the degrees of freedom ( d f df df ). Once the sample mean x ˉ \bar{x} x ˉ is calculated, only n − 1 n - 1 n − 1 deviations are free to vary; the n n n -th deviation is mathematically fixed because ∑ ( x i − x ˉ ) = 0 \sum (x_i - \bar{x}) = 0 ∑ ( x i ​ − x ˉ ) = 0 .

3. Standard Deviation ( σ \sigma σ and s s s )

While variance is mathematically essential for statistical modeling (e.g., ANOVA), its unit of measurement is squared (e.g., minutes 2 \text{minutes}^2 minutes 2 , mm 2 \text{mm}^2 mm 2 , or dollars 2 \text{dollars}^2 dollars 2 ), making it difficult to interpret practically. The standard deviation resolves this by taking the positive square root of the variance, returning dispersion to the original measurement units: σ = σ 2 = ∑ i = 1 N ( X i − μ ) 2 N (Population Standard Deviation) \sigma = \sqrt{\sigma^2} = \sqrt{\frac{\sum_{i=1}^N (X_i - \mu)^2}{N}} \quad \text{(Population Standard Deviation)} σ = σ 2 ​ = N ∑ i = 1 N ​ ( X i ​ − μ ) 2 ​ ​ (Population Standard Deviation) s = s 2 = ∑ i = 1 n ( x i − x ˉ ) 2 n − 1 (Sample Standard Deviation) s = \sqrt{s^2} = \sqrt{\frac{\sum_{i=1}^n (x_i - \bar{x})^2}{n - 1}} \quad \text{(Sample Standard Deviation)} s = s 2 ​ = n − 1 ∑ i = 1 n ​ ( x i ​ − x ˉ ) 2 ​ ​ (Sample Standard Deviation)

In Six Sigma methodology, the standard deviation is the universal benchmark metric for evaluating process variation, calculating capability indices ( C p , C p k C_p, C_{pk} C p ​ , C p k ​ ), and establishing statistical process control limits.

4. Interquartile Range (IQR)

The Interquartile Range (IQR) measures the spread of the middle 50% of ordered observations. It is computed as the difference between the third quartile ( Q 3 Q_3 Q 3 ​ , 75th percentile) and the first quartile ( Q 1 Q_1 Q 1 ​ , 25th percentile): I Q R = Q 3 − Q 1 IQR = Q_3 - Q_1 I QR = Q 3 ​ − Q 1 ​

Robustness: Because the IQR discards the lowest 25% and highest 25% of data, it is impervious to extreme outliers and heavy tails. It serves as the dispersion counterpart to the median.

Box-and-Whisker Plots & Five-Number Summary

Developed by statistician John Tukey, the Box-and-Whisker Plot (boxplot) provides an exploratory data visualization of process location, dispersion, skewness, and outliers based on the Five-Number Summary :

Minimum: The smallest observed value within the non-outlier fence boundaries.

First Quartile ( Q 1 Q_1 Q 1 ​ ): 25th percentile (splits lower 25% from upper 75%).

Median ( Q 2 Q_2 Q 2 ​ ): 50th percentile (central process line).

Third Quartile ( Q 3 Q_3 Q 3 ​ ): 75th percentile (splits lower 75% from upper 25%).

  • Maximum: The largest observed value within the non-outlier fence boundaries. Lower Outlier Upper Outlier
  • * * *
  • ───────┼─────────────┬──────────────┬──────────────┬───────────────┼──────────
  • Fence Min Q1 Median Q3 Fence
  • [Q1 - 1.5*IQR] ┌──────────────┬──────────────┐ [Q3 + 1.5*IQR]
  • ├───────────────┤ │ ├──────┤
  • └──────────────┴──────────────┘
  • ◄──────────── IQR ────────────►
  • (Middle 50% of Process Data)
  • Tukey's 1.5 * IQR Rule for Outlier Detection

Boxplots define objective mathematical boundaries (called "inner fences") beyond which data points are categorized as suspected outliers :

  • Lower Inner Fence: LIF = Q 1 − 1.5 × I Q R \text{LIF} = Q_1 - 1.5 \times IQR LIF = Q 1 ​ − 1.5 × I QR
  • Upper Inner Fence: UIF = Q 3 + 1.5 × I Q R \text{UIF} = Q_3 + 1.5 \times IQR UIF = Q 3 ​ + 1.5 × I QR

Any data point falling below the Lower Inner Fence ( x i < L I F x_i < LIF x i ​ < L I F ) or above the Upper Inner Fence ( x i > U I F x_i > UIF x i ​ > U I F ) is plotted as an individual asterisk or circle and flagged for investigation. In Six Sigma, outliers are never arbitrarily erased; they must be investigated to determine whether they represent measurement error, data entry mistakes, or genuine special-cause process disturbances.

Step-by-Step Worked Example: Calculating Dispersion & Outlier Fences

Scenario: A Green Belt monitors a CNC grinding operation producing precision stainless-steel pins. A random sample of n = 6 n = 6 n = 6 pins yields the following diameter deviations from nominal (in microns): { 12 , 14 , 15 , 16 , 18 , 21 } \{12, 14, 15, 16, 18, 21\} { 12 , 14 , 15 , 16 , 18 , 21 }

Step 1: Calculate the Sample Mean ( x ˉ \bar{x} x ˉ ) x ˉ = ∑ x i n = 12 + 14 + 15 + 16 + 18 + 21 6 = 96 6 = 16.0 microns \bar{x} = \frac{\sum x_i}{n} = \frac{12 + 14 + 15 + 16 + 18 + 21}{6} = \frac{96}{6} = 16.0 \text{ microns} x ˉ = n ∑ x i ​ ​ = 6 12 + 14 + 15 + 16 + 18 + 21 ​ = 6 96 ​ = 16.0 microns

Step 2: Compute Deviations and Sum of Squared Deviations ( S S SS SS )

Pin ( i i i ) Diameter ( x i x_i x i ​ ) Deviation ( x i − x ˉ ) (x_i - \bar{x}) ( x i ​ − x ˉ ) Squared Deviation ( x i − x ˉ ) 2 (x_i - \bar{x})^2 ( x i ​ − x ˉ ) 2

  • 1 12 12 − 16 = − 4 12 - 16 = -4 12 − 16 = − 4 ( − 4 ) 2 = 16 (-4)^2 = 16 ( − 4 ) 2 = 16
  • 2 14 14 − 16 = − 2 14 - 16 = -2 14 − 16 = − 2 ( − 2 ) 2 = 4 (-2)^2 = 4 ( − 2 ) 2 = 4
  • 3 15 15 − 16 = − 1 15 - 16 = -1 15 − 16 = − 1 ( − 1 ) 2 = 1 (-1)^2 = 1 ( − 1 ) 2 = 1
  • 4 16 16 − 16 = 0 16 - 16 = 0 16 − 16 = 0 ( 0 ) 2 = 0 (0)^2 = 0 ( 0 ) 2 = 0
  • 5 18 18 − 16 = + 2 18 - 16 = +2 18 − 16 = + 2 ( + 2 ) 2 = 4 (+2)^2 = 4 ( + 2 ) 2 = 4
  • 6 21 21 − 16 = + 5 21 - 16 = +5 21 − 16 = + 5 ( + 5 ) 2 = 25 (+5)^2 = 25 ( + 5 ) 2 = 25

Total ∑ x i = 96 \sum x_i = 96 ∑ x i ​ = 96 ∑ ( x i − x ˉ ) = 0 \sum (x_i - \bar{x}) = 0 ∑ ( x i ​ − x ˉ ) = 0 ∑ ( x i − x ˉ ) 2 = 50 \sum (x_i - \bar{x})^2 = 50 ∑ ( x i ​ − x ˉ ) 2 = 50

Notice that the sum of signed deviations equals exactly zero, verifying the mathematical definition of the arithmetic mean.

Step 3: Compute Sample Variance ( s 2 s^2 s 2 )

Divide the sum of squared deviations by degrees of freedom n − 1 = 6 − 1 = 5 n - 1 = 6 - 1 = 5 n − 1 = 6 − 1 = 5 : s 2 = 50 6 − 1 = 50 5 = 10.0 microns 2 s^2 = \frac{50}{6 - 1} = \frac{50}{5} = 10.0 \text{ microns}^2 s 2 = 6 − 1 50 ​ = 5 50 ​ = 10.0 microns 2

(Note: If population variance had been mistakenly calculated by dividing by 6, the result would be 50 / 6 = 8.333 microns 2 50 / 6 = 8.333\text{ microns}^2 50/6 = 8.333 microns 2 , underestimating true variance by 16.7%).

Step 4: Compute Sample Standard Deviation ( s s s ) s = s 2 = 10.0 ≈ 3.162 microns s = \sqrt{s^2} = \sqrt{10.0} \approx 3.162 \text{ microns} s = s 2 ​ = 10.0 ​ ≈ 3.162 microns

  • Step 5: Compute Five-Number Summary and IQR Outlier Fences
  • Ordered dataset: { 12 , 14 , 15 , 16 , 18 , 21 } \{12, 14, 15, 16, 18, 21\} { 12 , 14 , 15 , 16 , 18 , 21 }
  • Minimum = 12 \text{Minimum} = 12 Minimum = 12
  • Lower half: { 12 , 14 , 15 } → Q 1 = 14 \{12, 14, 15\} \rightarrow Q_1 = 14 { 12 , 14 , 15 } → Q 1 ​ = 14
  • Median = 15 + 16 2 = 15.5 \text{Median} = \frac{15 + 16}{2} = 15.5 Median = 2 15 + 16 ​ = 15.5
  • Upper half: { 16 , 18 , 21 } → Q 3 = 18 \{16, 18, 21\} \rightarrow Q_3 = 18 { 16 , 18 , 21 } → Q 3 ​ = 18
  • Maximum = 21 \text{Maximum} = 21 Maximum = 21

I Q R = Q 3 − Q 1 = 18 − 14 = 4.0 microns IQR = Q_3 - Q_1 = 18 - 14 = 4.0 \text{ microns} I QR = Q 3 ​ − Q 1 ​ = 18 − 14 = 4.0 microns

Evaluate outlier fences: LIF = Q 1 − 1.5 × I Q R = 14 − 1.5 ( 4.0 ) = 14 − 6.0 = 8.0 microns \text{LIF} = Q_1 - 1.5 \times IQR = 14 - 1.5(4.0) = 14 - 6.0 = 8.0 \text{ microns} LIF = Q 1 ​ − 1.5 × I QR = 14 − 1.5 ( 4.0 ) = 14 − 6.0 = 8.0 microns UIF = Q 3 + 1.5 × I Q R = 18 + 1.5 ( 4.0 ) = 18 + 6.0 = 24.0 microns \text{UIF} = Q_3 + 1.5 \times IQR = 18 + 1.5(4.0) = 18 + 6.0 = 24.0 \text{ microns} UIF = Q 3 ​ + 1.5 × I QR = 18 + 1.5 ( 4.0 ) = 18 + 6.0 = 24.0 microns

All six observed values ( 12 … 21 12 \dots 21 12 … 21 ) fall safely within [ 8.0 , 24.0 ] [8.0, 24.0] [ 8.0 , 24.0 ] . If a pin measured 26.0 microns 26.0\text{ microns} 26.0 microns , it would exceed the UIF of 24.0 24.0 24.0 and be flagged as an outlier.

Critical CSSC Exam Traps

Trap 1: Omitting Bessel's Correction ( n n n vs. n − 1 n - 1 n − 1 ) — When given a sample dataset on the exam, candidates frequently divide by n n n instead of n − 1 n - 1 n − 1 . Dividing by n n n calculates population variance σ 2 \sigma^2 σ 2 , which yields an artificially small variance and causes capability indices to appear falsely inflated.

Trap 2: Using the Mean for Skewed Operational Metrics — Exam scenarios presenting heavily skewed data (such as invoice processing turnaround times or IT incident resolution hours) will ask for the most representative metric of process performance. Choosing the mean is incorrect; the median and IQR must be chosen when data is skewed.

Trap 3: Averaging Bimodal Processes — If a process exhibits two distinct peaks (e.g., modes at 10 psi and 30 psi), computing an overall mean of 20 psi is mathematically valid but operationally catastrophic. The process never actually produces parts at 20 psi; it produces two distinct streams that must be segregated.

Trap 4: Confusing Range with IQR — Range spans 100% of observations from minimum to maximum and is highly sensitive to extreme points. IQR spans the middle 50% of observations ( Q 3 − Q 1 Q_3 - Q_1 Q 3 ​ − Q 1 ​ ) and is entirely resistant to tail extremes.

Loading diagram... Selecting Measures of Central Tendency & Dispersion in Six Sigma