Study guide

Multi-Vari Studies

ASQ Certified Six Sigma Green Belt CSSGB

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

CSSGB Exam Facts & Logistics How to Study for an Open-Book ASQ Exam

2 Six Sigma Foundations

Value of Six Sigma & Quality Leaders Organizational Goals & Six Sigma Projects Organizational Drivers, KPIs & Scorecards

3 Lean Principles in the Organization

Lean Concepts Value Stream Mapping & Waste

4 Design for Six Sigma

DFSS Road Maps: DMADV & IDOV FMEA Basics & Risk Priority Number Design FMEA vs Process FMEA

5 Define: Project Identification

Project Selection & DMAIC Fit Process Elements & Boundaries Benchmarking Types SIPOC & Process Inputs/Outputs

6 Stakeholders & Voice of the Customer

Owners & Stakeholders Customer Identification Customer Data Collection CTQ, QFD & Kano

7 Project Management Core

Agile & Top-Down Project Methods Project Charter & Problem Statements Project Scope Tools Primary & Consequential Metrics

8 Planning, Risk & Closure

WBS, Gantt, CPM, PERT & Tollgates Project Documentation Project Risk Analysis & Management Project Closure & Lessons Learned

9 Management Tools & Business Results

Eight Management & Planning Tools DPU, RTY, CoPQ, DPMO & Sigma Level Organizational Communication

10 Team Dynamics & Performance

Team Stages & Negative Dynamics Six Sigma Roles & RACI Brainstorming, NGT & Multivoting Team Communication

11 Measure: Process & Probability

Process Maps & Documentation Basic Probability Concepts Central Limit Theorem

12 Distributions & Data Collection

Statistical Distributions Data Types & Measurement Scales Sampling & Data Collection Plans Descriptive Statistics

13 Graphical Methods & MSA

Graphical Methods Measurement System Analysis & Gage R&R Bias, Linearity, Stability & P/T

14 Process & Performance Capability

Process Performance vs Specifications Process Capability Studies Cp, Cpk, Pp, Ppk & Cpm Short-Term vs Long-Term Capability & Sigma Shift

15 Analyze: Exploratory Data Analysis

Multi-Vari Studies Correlation & Linear Regression

16 Hypothesis Testing

Hypothesis Testing Basics Tests for Means, Variances & Proportions

17 Gap & Root Cause Analysis

Gap Analysis Root Cause Analysis Tools

18 Design of Experiments

DoE Basic Terms Main Effects & Interaction Plots

19 Implementation Planning & Lean Tools

Implementation Planning & Pilots Waste Elimination Tools Cycle-Time Reduction & SMED Kaizen & Kaizen Blitz

20 Statistical Process Control

SPC Basics: Common vs Special Cause Rational Subgrouping Control Chart Selection & Construction

21 Sustaining Improvements & Lean Control

Control Plans Document Control, Training & Audits Plan-Do-Check-Act (PDCA) TPM & Visual Factory

Multi-Vari Studies

Key Takeaways Explain This Topic AI

A multi-vari study is a structured sampling plan that graphs process data so you can see which family of variation dominates: positional, cyclical, or temporal.

Positional variation occurs within a single unit or fixed location pattern (within-piece, cavity-to-cavity, left-to-right); cyclical is unit-to-unit or batch-to-batch; temporal is time-ordered (shift, day, week).

Design the sampling plan before collecting data: fix how many positions per unit, how many consecutive units, and how many time periods so the three families can be compared on one chart.

Interpret the chart by comparing vertical spreads and patterns—the largest, most consistent family of spread points to the first root-cause hunt in Analyze.

Multi-vari is an exploratory Create-level tool: it prioritizes where variation lives; it does not replace hypothesis tests, DOE, or MSA when you need statistical confirmation.

Last updated: July 2026

Multi-Vari Studies

Quick Answer: A multi-vari study is a planned data-collection and charting method that compares three families of process variation— positional (within a unit or fixed location pattern), cyclical (unit-to-unit or batch-to-batch), and temporal (over time such as shift or day)—so the Analyze phase starts with the family that actually drives the problem.

Why Multi-Vari Belongs in Analyze

After Measure gives you a baseline Y and candidate X's, you still need a practical map of where variation lives . Jumping to regression or DOE without that map wastes samples. Multi-vari is a Create -level BoK skill (IV.A.1): design a sampling plan, collect a modest structured sample, and read a chart that ranks variation families by visual magnitude. It is exploratory—not a substitute for p-values—but it is high leverage for focusing root-cause work.

Think of multi-vari as a stratified snapshot : instead of one undifferentiated pile of numbers, you sample so within-piece, piece-to-piece, and time-to-time differences appear side by side.

The Three Families of Variation

Family Meaning Typical sources Chart cue

Positional Spread within one unit or across fixed locations on the same unit/setup Thickness left/center/right; cavity A vs B; top vs bottom Large vertical range inside one piece's marks

Cyclical Differences from unit to unit (or lot to lot) in sequence Tool wear within a lot; consecutive parts from different cavities Large jumps between consecutive units; positions within a unit stay tight

Temporal Changes over longer time Shift A vs B; day-of-week; after maintenance; humidity drift Whole time blocks sit higher/lower or change variance

These families are not mutually exclusive. Multi-vari asks: which family is largest , and is that pattern stable across the study window?

Sampling Plans for Multi-Vari Charts

Design the plan before you walk the floor.

Define Y. Prefer a continuous characteristic (dimension, weight, time, temperature). Attribute rates are harder to read on multi-vari charts.

Choose positions (positional factor). Use 2–5 locations per unit: edge/center/edge, cavities on one cycle, or other fixed layout positions.

Choose consecutive units (cyclical factor). Often 3–5 consecutive units per time period so unit-to-unit swing is visible.

Choose time periods (temporal factor). Sample across 3 or more natural blocks (shifts, days, runs) that cover the problem window.

Hold the measurement system steady. One gage and one appraiser when possible—or a validated MSA—so "positional" is not really gage noise.

Keep the process as-is. Do not "fix" the process during the study; multi-vari pictures current noise.

Rule of thumb: 3–5 positions × 3–5 consecutive units × 3+ time periods. Adjust for cost and line speed, but do not collapse all three factors into one random sample.

Building and Reading the Chart

Classic multi-vari charts put the measured value on the vertical axis and arrange points so:

  • The same unit's positions are clustered or connected (positional spread)
  • Units follow production order within a time block (cyclical)
  • Time blocks are separated along the horizontal axis (temporal)

Interpretation sequence:

Positional ranges — For each unit, how large is high–low across positions? Large within-unit ranges point to fixture, fill pattern, or heat/profile across the part.

Cyclical pattern — Compare consecutive units. Large unit-to-unit jumps with tight within-unit ranges point to feedstock, tooling cycle, or unit-level inputs.

Temporal pattern — Do whole blocks sit higher or lower? Does variance explode after a shift change? Look at setup, environment, staffing, and maintenance.

Name the dominant family and list 3–5 technical hypotheses inside that family before DOE.

Worked Scenario 1 — Injection-Molded Clip Thickness

Three positions (left, center, right), four consecutive shots per period, three shifts.

Pattern: Within each shot, left–center–right differs by about 0.12 mm . Consecutive shots differ by about 0.03 mm . Shift averages sit within 0.02 mm .

Interpretation: Positional dominates. Prioritize mold balance, gate location, cooling uniformity, and cavity fill—not shift handoffs first.

Worked Scenario 2 — Call Handle Time

Three consecutive calls per block across four times of day.

Pattern: Call-to-call spread is moderate. Late afternoon blocks sit about 4 minutes higher than morning blocks across days.

Interpretation: Temporal (time-of-day) dominates. Hypotheses focus on queue load, staffing, and escalation mix by hour.

Worked Scenario 3 — Shaft Diameter

Two diameters (front/rear) on five consecutive parts per lot, three lots in a day.

Pattern: Front vs rear differs by 0.01 mm . Consecutive parts swing by 0.08 mm . Lot means are similar.

Interpretation: Cyclical (part-to-part) dominates. Investigate stock hardness, tool wear within the lot, bar feeder consistency, and coolant—not primarily within-shaft geometry.

  • Pitfalls and Exam Focus
  • Too few time periods → one-day anomalies look like "the process."

Confounding position with appraiser → "positional" may be MSA error.

Stopping at the family name → "It's positional" is a searchlight , not a root cause.

Using multi-vari as proof of improvement → re-confirm with control charts or capability after changes.

CSSGB items usually test matching a described pattern to positional, cyclical, or temporal and knowing multi-vari is a planned sampling + graphical Analyze tool—not a formal hypothesis test. Create a defensible plan, rank the dominant family, then go deeper with the right next tool.