Study guide
Data Types & Measurement Scales
ASQ Certified Six Sigma Green Belt CSSGB
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
CSSGB Exam Facts & Logistics How to Study for an Open-Book ASQ Exam
2 Six Sigma Foundations
Value of Six Sigma & Quality Leaders Organizational Goals & Six Sigma Projects Organizational Drivers, KPIs & Scorecards
3 Lean Principles in the Organization
Lean Concepts Value Stream Mapping & Waste
4 Design for Six Sigma
DFSS Road Maps: DMADV & IDOV FMEA Basics & Risk Priority Number Design FMEA vs Process FMEA
5 Define: Project Identification
Project Selection & DMAIC Fit Process Elements & Boundaries Benchmarking Types SIPOC & Process Inputs/Outputs
6 Stakeholders & Voice of the Customer
Owners & Stakeholders Customer Identification Customer Data Collection CTQ, QFD & Kano
7 Project Management Core
Agile & Top-Down Project Methods Project Charter & Problem Statements Project Scope Tools Primary & Consequential Metrics
8 Planning, Risk & Closure
WBS, Gantt, CPM, PERT & Tollgates Project Documentation Project Risk Analysis & Management Project Closure & Lessons Learned
9 Management Tools & Business Results
Eight Management & Planning Tools DPU, RTY, CoPQ, DPMO & Sigma Level Organizational Communication
10 Team Dynamics & Performance
Team Stages & Negative Dynamics Six Sigma Roles & RACI Brainstorming, NGT & Multivoting Team Communication
11 Measure: Process & Probability
Process Maps & Documentation Basic Probability Concepts Central Limit Theorem
12 Distributions & Data Collection
Statistical Distributions Data Types & Measurement Scales Sampling & Data Collection Plans Descriptive Statistics
13 Graphical Methods & MSA
Graphical Methods Measurement System Analysis & Gage R&R Bias, Linearity, Stability & P/T
14 Process & Performance Capability
Process Performance vs Specifications Process Capability Studies Cp, Cpk, Pp, Ppk & Cpm Short-Term vs Long-Term Capability & Sigma Shift
15 Analyze: Exploratory Data Analysis
Multi-Vari Studies Correlation & Linear Regression
16 Hypothesis Testing
Hypothesis Testing Basics Tests for Means, Variances & Proportions
17 Gap & Root Cause Analysis
Gap Analysis Root Cause Analysis Tools
18 Design of Experiments
DoE Basic Terms Main Effects & Interaction Plots
19 Implementation Planning & Lean Tools
Implementation Planning & Pilots Waste Elimination Tools Cycle-Time Reduction & SMED Kaizen & Kaizen Blitz
20 Statistical Process Control
SPC Basics: Common vs Special Cause Rational Subgrouping Control Chart Selection & Construction
21 Sustaining Improvements & Lean Control
Control Plans Document Control, Training & Audits Plan-Do-Check-Act (PDCA) TPM & Visual Factory
Data Types & Measurement Scales
Key Takeaways Explain This Topic AI
Continuous (variables) data can take any value in a range and support richer statistics and control charts than pass/fail attributes.
Discrete (attributes) data are countable classifications or counts—defectives, defects, categories—often cheaper but less informative per observation.
Stevens’s scales—nominal, ordinal, interval, and ratio—determine which math operations and charts are valid.
Nominal names categories; ordinal ranks; interval has equal spacing without a true zero; ratio has equal spacing and a true zero.
Green Belts choose tools from data type and scale: means and σ need interval/ratio continuous data; Pareto and contingency tables handle categories.
Last updated: July 2026
Data Types & Measurement Scales
Quick Answer: Six Sigma data are continuous (variables) or discrete (attributes) . Measurement scales— nominal, ordinal, interval, ratio —define what arithmetic is valid. Green Belts classify data before choosing control charts, descriptive statistics, or hypothesis tests so analysis matches the information the numbers actually carry.
Why Classification Comes First
Every DMAIC project lives or dies on data quality—and “quality” starts with knowing what kind of data you have. Applying a mean and standard deviation to pure category codes, or treating Likert ranks as if they were precise temperatures, produces polished nonsense. CSSGB BoK III.D.1 expects you to analyze data types and scales: identify them in scenarios and select appropriate methods.
Continuous (Variables) Data
Continuous data (also called variables data ) come from measurements that can take any value within a continuum, limited only by instrument resolution.
Examples: length (mm), weight (g), time (seconds), temperature (°C), pressure, voltage, financial amount, cycle time.
Properties useful to Green Belts:
- Support mean, median, variance, standard deviation , histograms, box plots
- Enable I-MR, X-bar/R, X-bar/S charts and capability indices when process and measurement systems cooperate
- Carry more information per observation than pass/fail, so sample sizes for a given precision are often smaller
Still require MSA: bias, linearity, stability, and Gage R&R matter because continuous CTQs drive customer specs
Worked contrast: Measuring shaft diameter to 0.001 mm tells you how close you are to the limit. Calling each shaft “in” or “out” only says whether you crossed the limit—you lose information about margin and drift.
Discrete (Attributes) Data
Discrete data take countable values. In quality work, two attribute flavors dominate:
Classification (defectives) — each unit is good/bad, pass/fail, conforming/nonconforming.
Count (defects) — number of nonconformities on a unit or in an area (scratches, missing fields, dents).
Other discrete examples: number of calls per hour, number of changeovers per week, defect code categories, days late (if recorded as whole days only).
Properties:
- Often cheaper and faster to collect (go/no-go gage, visual inspection)
- Require larger samples to detect shifts of the same practical size compared with continuous data
- Drive p, np, c, u charts rather than X-bar charts
Still need operational definitions: what counts as a “scratch”? when is a claim “late”?
Defect vs defective (repeat until automatic):
- Term Meaning Example
- Defective A unit with one or more defects (unit fails) 3 bad boards in 100
- Defect An individual nonconformity 7 solder issues on those boards
One defective board can carry multiple defects. Your data type choice and chart family follow that distinction.
Measurement Scales (Stevens)
Independent of continuous vs discrete, each measurement lives on a scale of measurement . Scale determines allowed statistics.
Nominal scale
Definition: Names or labels only; no order.
Examples: machine ID, shift color code, defect type (scratch / dent / stain), department, yes/no coded as labels.
Valid ops: count, mode, contingency tables, chi-square tests of association, Pareto by category.
Invalid: mean of “Machine 1, 2, 3” if numbers are only names; “average defect type” is meaningless.
Ordinal scale
Definition: Ordered categories; gaps between ranks are not necessarily equal.
Examples: severity rankings (low/medium/high), satisfaction 1–5 Likert items, inspection grades A > B > C, priority scores.
Valid ops: median, percentiles, rank-based methods, ordered bar charts; mode.
Caution: Treating ordinal averages as precise interval means is common but theoretically shaky—acceptable as a rough KPI only with care and consistent interpretation.
Interval scale
Definition: Equal intervals between values; no true zero (zero is arbitrary).
Classic example: temperature in °C or °F (0 °C is not “no temperature”); calendar year.
Valid ops: mean, standard deviation, many parametric methods; differences are meaningful (“5 °C warmer”).
Invalid: ratios (“20 °C is twice as hot as 10 °C” is false on Celsius).
Ratio scale
Definition: Equal intervals and a true zero meaning absence of the quantity.
Examples: length, mass, time duration, counts, Kelvin temperature, money, defect counts, cycle time from start to finish.
Valid ops: all interval ops plus ratios (“twice as long,” “half the scrap cost”).
Green Belt default: most engineering CTQs and cost metrics are ratio-scale continuous or ratio-scale counts.
Putting Type and Scale Together
- Data example Continuous / discrete Scale Typical tools
- Diameter (mm) Continuous Ratio Histogram, X-bar/R, Cpk, t-tests
- Temperature (°C) Continuous Interval Same as continuous; avoid ratio claims
- Pass/fail gage Discrete (defective) Nominal (or binary) p/np chart, binomial methods
- Scratches per door Discrete (count) Ratio c/u chart, Poisson methods
- Defect code Discrete Nominal Pareto, contingency tables
- Customer rating 1–5 Discrete ordered Ordinal Median, bar chart; careful with means
- Shift (A/B/C) Discrete Nominal Stratification factor, chi-square
- Practical Green Belt Rules
Prefer continuous ratio data for CTYs when measurement cost is acceptable—more sensitivity per sample.
Write operational definitions before collection so “late,” “dent,” and “rework” do not morph mid-project.
Do not average nominal codes. Summarize with counts and percentages.
Match chart to type: variables charts for continuous measurements; attribute charts for defectives/defects.
Stratify nominal factors (machine, shift, supplier) even when the Y is continuous—multi-vari and ANOVA thinking start with correct factor typing.
In surveys, treat single Likert items as ordinal; multi-item scales sometimes behave more interval-like—know your organization’s standard and exam expectations (usually: ordinal caution).
Common Exam and Project Traps
Recording “% defective” and forgetting it is still attribute-derived—control chart and sample-size logic differ from measuring the underlying continuous CTQ.
Coding Yes = 1, No = 0 and computing a “mean” (which is a proportion)—valid as a proportion, but you are not working with continuous variables data for capability in the usual Cp/Cpk sense without a continuous Y.
Calling all numeric-looking fields “continuous”—zip codes and priority ranks are not ratio engineering data.
Using parametric mean tests on pure ranks without acknowledging ordinal limitations.
Link Forward in Measure
Once type and scale are clear, the next BoK topics—sampling plans, descriptive statistics, graphics, and MSA—fit naturally. You cannot design a check sheet, choose a sample size, or interpret a standard deviation until you know whether each field is a continuous CTQ, a count of defects, or a category label. Classify first; analyze second.