Study guide

Tests for Means, Variances & Proportions

ASQ Certified Six Sigma Green Belt CSSGB

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

CSSGB Exam Facts & Logistics How to Study for an Open-Book ASQ Exam

2 Six Sigma Foundations

Value of Six Sigma & Quality Leaders Organizational Goals & Six Sigma Projects Organizational Drivers, KPIs & Scorecards

3 Lean Principles in the Organization

Lean Concepts Value Stream Mapping & Waste

4 Design for Six Sigma

DFSS Road Maps: DMADV & IDOV FMEA Basics & Risk Priority Number Design FMEA vs Process FMEA

5 Define: Project Identification

Project Selection & DMAIC Fit Process Elements & Boundaries Benchmarking Types SIPOC & Process Inputs/Outputs

6 Stakeholders & Voice of the Customer

Owners & Stakeholders Customer Identification Customer Data Collection CTQ, QFD & Kano

7 Project Management Core

Agile & Top-Down Project Methods Project Charter & Problem Statements Project Scope Tools Primary & Consequential Metrics

8 Planning, Risk & Closure

WBS, Gantt, CPM, PERT & Tollgates Project Documentation Project Risk Analysis & Management Project Closure & Lessons Learned

9 Management Tools & Business Results

Eight Management & Planning Tools DPU, RTY, CoPQ, DPMO & Sigma Level Organizational Communication

10 Team Dynamics & Performance

Team Stages & Negative Dynamics Six Sigma Roles & RACI Brainstorming, NGT & Multivoting Team Communication

11 Measure: Process & Probability

Process Maps & Documentation Basic Probability Concepts Central Limit Theorem

12 Distributions & Data Collection

Statistical Distributions Data Types & Measurement Scales Sampling & Data Collection Plans Descriptive Statistics

13 Graphical Methods & MSA

Graphical Methods Measurement System Analysis & Gage R&R Bias, Linearity, Stability & P/T

14 Process & Performance Capability

Process Performance vs Specifications Process Capability Studies Cp, Cpk, Pp, Ppk & Cpm Short-Term vs Long-Term Capability & Sigma Shift

15 Analyze: Exploratory Data Analysis

Multi-Vari Studies Correlation & Linear Regression

16 Hypothesis Testing

Hypothesis Testing Basics Tests for Means, Variances & Proportions

17 Gap & Root Cause Analysis

Gap Analysis Root Cause Analysis Tools

18 Design of Experiments

DoE Basic Terms Main Effects & Interaction Plots

19 Implementation Planning & Lean Tools

Implementation Planning & Pilots Waste Elimination Tools Cycle-Time Reduction & SMED Kaizen & Kaizen Blitz

20 Statistical Process Control

SPC Basics: Common vs Special Cause Rational Subgrouping Control Chart Selection & Construction

21 Sustaining Improvements & Lean Control

Control Plans Document Control, Training & Audits Plan-Do-Check-Act (PDCA) TPM & Visual Factory

Tests for Means, Variances & Proportions

Key Takeaways Explain This Topic AI

Match the test to the data story: t-tests for means (one-sample, two-sample, or paired), F-test for equality of two variances, ANOVA for means of three or more groups, and chi-square for categorical counts or proportions.

A paired-comparison t-test uses differences on matched pairs (before/after on the same unit, left/right, same operator on two methods) and tests whether the mean difference is zero.

The F-test compares two sample variances (or uses ANOVA’s mean squares); unequal variance can change which two-sample mean procedure is appropriate and often points to process instability.

One-way ANOVA tests H₀ that all group means are equal; a significant result says at least one mean differs—follow with process knowledge or multiple comparisons, not a claim that every group differs from every other.

Chi-square tests of independence or goodness-of-fit use counts in categories; they answer association or distribution-fit questions for attribute data, not continuous mean shifts.

Last updated: July 2026

Tests for Means, Variances & Proportions

Quick Answer: Choose the hypothesis test from the question and data type : t-tests for continuous means (including paired differences), F-test for two variances, ANOVA for means across three or more groups, and chi-square for counts/proportions in categories—then interpret p-values with effect size and process meaning, not letters alone.

Selecting the Right Test

  • Question Typical data Common test
  • Is the mean equal to a target μ₀? One continuous sample One-sample t-test
  • Do two independent groups have the same mean? Two continuous samples Two-sample t-test
  • Did the same units change (before/after)? Paired continuous differences Paired t-test
  • Are two process variances equal? Two continuous samples F-test for variances
  • Are means equal across 3+ groups? Continuous Y, one categorical X One-way ANOVA
  • Are category proportions independent / as claimed? Counts in a table Chi-square test

Verify independence, measurement quality, and rough distribution assumptions. Software prints p-values; your job is correct setup and interpretation .

  • Tests for Means — t Family
  • One-sample t-test

H₀: μ = μ₀ vs Hₐ: μ ≠ μ₀ (or one-sided). Uses sample mean, s, and n. Compare a process mean to a historical standard or mid-target as a mean test (capability still needs the full distribution vs specs).

Two-sample (independent) t-test

H₀: μ₁ = μ₂ for two independent groups (Line A vs B, Supplier 1 vs 2). If variances differ substantially, avoid forcing a pooled variance (e.g., use a Welch-type procedure). Check that “group” is not confounded with time or operator.

Paired-comparison t-test

When each observation in one sample is naturally linked to one in the other, analyze the differences dᵢ:

H₀: μ_d = 0 (mean difference is zero)

Classic pairing: same part with Method 1 and Method 2; same agent before/after training; left/right on the same board. Pairing removes unit-to-unit noise , raising power for a true method effect.

Worked scenario — paired t

Ten machines timed on old and new setups. Differences (new − old): d̄ = −1.8 min, s_d = 1.5 min.

  • SE ≈ 1.5 / √10 ≈ 0.47
  • t ≈ −1.8 / 0.47 ≈ −3.8 (df = 9)

At α = 0.05 two-sided, |t| this large yields p well below 0.05 → reject H₀ of zero mean difference. Interpretation: average cycle time is lower on the new setup. Still judge practical significance (−1.8 min vs labor cost) and confirm stability after rollout.

Treating the same data as independent two-sample (ignoring pairing) inflates error with between-machine noise and can hide the setup effect—a common exam trap.

F-Test for Variances

F-test (two variances) compares s₁² and s₂²:

H₀: σ₁² = σ₂² vs Hₐ: not equal (or one-sided)

Statistic form: F = s₁² / s₂² (df = n₁−1, n₂−1), using the software’s ratio convention.

When it matters: choosing pooled vs unpooled t procedures; confirming a noise-reduction project cut variance; checking multi-vari hunches that one stream is wider.

Worked scenario — F-test

Shift A: n = 20, s = 2.0; Shift B: n = 18, s = 3.5.

F ≈ (3.5)² / (2.0)² = 3.06 . For typical α and df, a ratio this large often gives p < 0.05 → reject equal variances. Interpretation: Shift B is more variable—investigate practices, staffing, or inputs, not only mean location.

Classical F-tests are sensitive to non-normality . Use histograms/boxplots; consider robust alternatives when outliers dominate.

ANOVA — Means of Three or More Groups

One-way ANOVA tests:

  • H₀: μ₁ = μ₂ = … = μₖ
  • Hₐ: at least one mean differs

It partitions variation into between-group and within-group mean squares; F = MS_between / MS_within . A significant F does not say which pairs differ—only that all-means-equal is untenable. Follow with plots, process knowledge, or planned comparisons.

Worked scenario — ANOVA

Four packaging lines’ seal strengths compared. ANOVA p = 0.008 at α = 0.05 → reject H₀. Boxplots show Line 3 below the others. Next: confirm Line 3 settings/maintenance—not automatically retool every line. If p = 0.40, fail to reject equal means—still check variance and practical gaps.

ANOVA assumes independent errors, similar within-group variances, and approximate residual normality; large equal samples are more robust.

Chi-Square — Proportions and Categories

Use counts , not continuous measurements.

Goodness-of-fit: Do observed frequencies match a stated distribution?

Independence / association (contingency table): Is defect type independent of shift? Pass/fail independent of supplier?

Statistic: χ² = Σ (O − E)² / E . Small expected counts weaken the approximation—combine categories or collect more data.

Worked scenario — chi-square

Scratch / Dent / Other by Day vs Night forms a 3×2 table; expected counts ≥ 5. χ² p = 0.03 → reject independence at α = 0.05. Interpretation: defect mix differs by shift—investigate lighting, handling, or inspection standards. This is not a t-test on percent defective unless you restructure properly (e.g., two-proportion methods with adequate n).

For simple two-proportion questions, CSSGB items may use a two-proportion z-test or χ² on a 2×2 table—same idea: small p → evidence proportions differ.

Putting Interpretation Together

  • Result Good Green Belt statement
  • p ≤ α, large useful effect Reject H₀; effect size supports Improve action
  • p ≤ α, tiny effect Statistically significant; practical impact may not justify change
  • p > α, large estimated effect, small n Fail to reject; may be underpowered—consider more data
  • Significant ANOVA At least one mean differs; identify which with plots/comparisons
  • Significant F / unequal s Variability may dominate; fix spread before chasing means
  • Pitfalls and Exam Focus

Using independent two-sample t when pairing is the design.

Running many unplanned t-tests among k groups instead of ANOVA first.

Applying chi-square to averages without raw counts.

Reading a significant F or ANOVA as root cause without process investigation.

Ignoring assumptions when n is tiny or outliers dominate.

CSSGB IV.B.2 items usually present a short scenario and ask which test , what H₀ means , or what a significant result allows —ground answers in the process question, not the option letter.