Study guide

Lean Concepts

ASQ Certified Six Sigma Green Belt CSSGB

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

CSSGB Exam Facts & Logistics How to Study for an Open-Book ASQ Exam

2 Six Sigma Foundations

Value of Six Sigma & Quality Leaders Organizational Goals & Six Sigma Projects Organizational Drivers, KPIs & Scorecards

3 Lean Principles in the Organization

Lean Concepts Value Stream Mapping & Waste

4 Design for Six Sigma

DFSS Road Maps: DMADV & IDOV FMEA Basics & Risk Priority Number Design FMEA vs Process FMEA

5 Define: Project Identification

Project Selection & DMAIC Fit Process Elements & Boundaries Benchmarking Types SIPOC & Process Inputs/Outputs

6 Stakeholders & Voice of the Customer

Owners & Stakeholders Customer Identification Customer Data Collection CTQ, QFD & Kano

7 Project Management Core

Agile & Top-Down Project Methods Project Charter & Problem Statements Project Scope Tools Primary & Consequential Metrics

8 Planning, Risk & Closure

WBS, Gantt, CPM, PERT & Tollgates Project Documentation Project Risk Analysis & Management Project Closure & Lessons Learned

9 Management Tools & Business Results

Eight Management & Planning Tools DPU, RTY, CoPQ, DPMO & Sigma Level Organizational Communication

10 Team Dynamics & Performance

Team Stages & Negative Dynamics Six Sigma Roles & RACI Brainstorming, NGT & Multivoting Team Communication

11 Measure: Process & Probability

Process Maps & Documentation Basic Probability Concepts Central Limit Theorem

12 Distributions & Data Collection

Statistical Distributions Data Types & Measurement Scales Sampling & Data Collection Plans Descriptive Statistics

13 Graphical Methods & MSA

Graphical Methods Measurement System Analysis & Gage R&R Bias, Linearity, Stability & P/T

14 Process & Performance Capability

Process Performance vs Specifications Process Capability Studies Cp, Cpk, Pp, Ppk & Cpm Short-Term vs Long-Term Capability & Sigma Shift

15 Analyze: Exploratory Data Analysis

Multi-Vari Studies Correlation & Linear Regression

16 Hypothesis Testing

Hypothesis Testing Basics Tests for Means, Variances & Proportions

17 Gap & Root Cause Analysis

Gap Analysis Root Cause Analysis Tools

18 Design of Experiments

DoE Basic Terms Main Effects & Interaction Plots

19 Implementation Planning & Lean Tools

Implementation Planning & Pilots Waste Elimination Tools Cycle-Time Reduction & SMED Kaizen & Kaizen Blitz

20 Statistical Process Control

SPC Basics: Common vs Special Cause Rational Subgrouping Control Chart Selection & Construction

21 Sustaining Improvements & Lean Control

Control Plans Document Control, Training & Audits Plan-Do-Check-Act (PDCA) TPM & Visual Factory

Lean Concepts

Key Takeaways Explain This Topic AI

Lean maximizes customer value by removing waste and creating smooth flow across the value chain.

Takt time equals available production time divided by customer demand and sets the pace for flow and JIT.

Theory of Constraints focuses improvement on the bottleneck that limits system throughput.

Green Belts integrate lean tools (Gemba, takt, JIT, spaghetti diagrams) with Six Sigma DMAIC to cut waste and variation.

Perfection is continuous: each cycle reduces the gap between current and ideal flow.

Last updated: July 2026

Lean Concepts (CSSGB BoK I.B.1 — Apply)

Quick Answer: Lean maximizes customer value by removing waste and creating smooth flow. Core ideas include the value chain, takt time, just-in-time (JIT), Theory of Constraints (TOC), Gemba, spaghetti diagrams, and continuous pursuit of perfection. Green Belts apply these tools inside DMAIC alongside Six Sigma variation reduction.

Lean defines success as delivering what the customer values, when they need it, with the least non-value-added activity. On the CSSGB exam, I.B.1 is at the Apply level: calculate takt time, recognize flow versus push, and choose the right lean concept for a scenario.

Value, Value Chain, and Flow

Value is what the customer is willing to pay for. Activities that transform product or information toward that outcome are value-added (VA) . Everything else is non-value-added (NVA) waste or necessary non-value-added (NNVA) work required by regulation or current technology.

The value chain is the end-to-end sequence that creates and delivers value—from order entry through production, logistics, and service. Lean improves the whole chain , not isolated departments. Local efficiency that floods the next process with WIP is not lean success.

Flow means work moves steadily with minimal queues, batching, and stoppages. Ideal flow is one-piece (or small-lot) movement matched to demand. Obstacles include large batches, unbalanced stations, long changeovers, and poor layout. Spaghetti diagrams and takt analysis expose those obstacles so Green Belts can redesign the path of work.

Core Lean Terms (Exam Table)

  • Term Meaning Green Belt application
  • Value Customer willingness to pay Separate VA vs NVA when mapping processes
  • Value chain End-to-end activities that create value Scope projects beyond a single silo
  • Flow Steady movement without interruptions Reduce queues, batch sizes, and handoffs
  • Takt time Available time ÷ customer demand Pace production and balance workstations
  • JIT Produce only what is needed, when needed Pull systems, kanban, small lots
  • Gemba The real place where work happens Observe process, not only reports
  • Spaghetti diagram Path of people/material on a layout Cut travel waste and improve cell design
  • Perfection Continuous pursuit of zero waste Kaizen cycles; never treat “good enough” as final
  • TOC (constraint) Bottleneck that limits throughput Elevate constraint before non-constraints
  • Takt Time — Definition and Worked Example

Takt time is the maximum time allowed to produce one unit to meet customer demand: Takt time = Available production time Customer demand \text{Takt time} = \frac{\text{Available production time}}{\text{Customer demand}} Takt time = Customer demand Available production time ​

It is the customer drumbeat . Station cycle time should be at or below takt (with buffer for variation). Stations much faster create idle inventory; stations slower cannot meet demand.

Worked example

A packaging cell runs one 8-hour shift with a 30-minute paid lunch and two 10-minute breaks :

  • Shift length: 8 × 60 = 480 minutes
  • Non-working time: 30 + 10 + 10 = 50 minutes
  • Available time = 480 − 50 = 430 minutes/day

Customer demand is 860 finished units per day . Takt time = 430 min 860 units = 0.5 min/unit = 30 seconds/unit \text{Takt time} = \frac{430\ \text{min}}{860\ \text{units}} = 0.5\ \text{min/unit} = 30\ \text{seconds/unit} Takt time = 860 units 430 min ​ = 0.5 min/unit = 30 seconds/unit

Interpretation:

Every 30 seconds , one unit must leave the process to stay on demand.

If the bottleneck cycle time is 42 seconds , demand cannot be met—improve the constraint (reduce cycle time, add capacity, or rebalance) before speeding non-bottleneck stations.

If average cycle time is 22 seconds but WIP piles up, the issue is batching, unbalanced flow, or push —apply JIT pull and flow redesign.

Use only the available-time exclusions the scenario states; do not invent efficiency factors unless given.

Just-in-Time (JIT)

Just-in-time produces and moves only what the next process needs, when it needs it, in the quantity needed. JIT replaces forecast-driven push with pull (often via kanban). Benefits include less inventory, shorter lead time, earlier defect detection, and less cash tied in WIP. Prerequisites include stable quality, reliable feeders, short changeovers, and a known takt. Green Belts often implement pull at the process level and cut lot sizes inside DMAIC Improve.

Theory of Constraints (TOC)

Theory of Constraints holds that system throughput is limited by a small number of constraints (often one primary bottleneck). The five focusing steps:

Identify the constraint.

Exploit it (maximize its effective use—no idle bottleneck).

Subordinate everything else to the constraint (non-constraints must not overproduce).

Elevate the constraint (capacity, technology, or redesign) if needed.

Repeat when the constraint moves.

TOC complements lean: lean removes waste broadly; TOC prioritizes where improvement most increases throughput. If a scenario shows one machine with endless queues while upstream idles, prioritize constraint management , not only general 5S.

Gemba, Spaghetti Diagrams, and Perfection

Gemba is the actual workplace. Gemba walks observe standard work, wait time, motion, and defects—rather than managing only from dashboards. Respect for people matters: observe to learn and improve, not to blame.

A spaghetti diagram traces the physical path of product, documents, or workers on a floor plan. Long, crossing, or backtracking paths indicate motion and transportation waste. After cell redesign or point-of-use storage, redraw the diagram; path length and crossings should drop.

Lean’s fifth principle is perfection : there is always more waste to remove. Green Belts lock gains with control plans and standard work, then start the next kaizen or DMAIC cycle.

How Lean Integrates with Six Sigma at Green Belt Level

Six Sigma attacks variation and defects with data and statistical tools. Lean attacks waste and flow . Together (Lean Six Sigma):

  • Focus Lean Six Sigma
  • Primary problem Waste, long lead time, poor flow Defects, variation, low capability
  • Typical tools VSM, 5S, kanban, takt, SMED, spaghetti MSA, capability, hypothesis tests, DOE, SPC
  • DMAIC fit Map waste in Measure; remove in Improve Quantify Y and X’s; prove improvements

At Green Belt level you should:

Use lean concepts to diagnose problems (Gemba, takt, constraint identification).

Select lean countermeasures when root causes are batching, waiting, motion, or overproduction.

Combine Six Sigma analytics when the problem is capability, measurement error, or multi-factor settings.

Match the tool to the problem—avoid “tool worship.”

Exam tip: customer demand pace → takt ; only produce when pulled → JIT/pull ; slowest step limits the system → TOC ; go see the process → Gemba .

A typical Green Belt sequence: walk the Gemba; draw a spaghetti diagram; compute takt (e.g., 30 s/unit); identify the sealer as the TOC constraint at 42 s; rebalance work; implement pull; then use Six Sigma tools on remaining seal defects. That is lean in action inside a Six Sigma project structure.