Study guide
Process Capability Studies
ASQ Certified Six Sigma Green Belt CSSGB
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
CSSGB Exam Facts & Logistics How to Study for an Open-Book ASQ Exam
2 Six Sigma Foundations
Value of Six Sigma & Quality Leaders Organizational Goals & Six Sigma Projects Organizational Drivers, KPIs & Scorecards
3 Lean Principles in the Organization
Lean Concepts Value Stream Mapping & Waste
4 Design for Six Sigma
DFSS Road Maps: DMADV & IDOV FMEA Basics & Risk Priority Number Design FMEA vs Process FMEA
5 Define: Project Identification
Project Selection & DMAIC Fit Process Elements & Boundaries Benchmarking Types SIPOC & Process Inputs/Outputs
6 Stakeholders & Voice of the Customer
Owners & Stakeholders Customer Identification Customer Data Collection CTQ, QFD & Kano
7 Project Management Core
Agile & Top-Down Project Methods Project Charter & Problem Statements Project Scope Tools Primary & Consequential Metrics
8 Planning, Risk & Closure
WBS, Gantt, CPM, PERT & Tollgates Project Documentation Project Risk Analysis & Management Project Closure & Lessons Learned
9 Management Tools & Business Results
Eight Management & Planning Tools DPU, RTY, CoPQ, DPMO & Sigma Level Organizational Communication
10 Team Dynamics & Performance
Team Stages & Negative Dynamics Six Sigma Roles & RACI Brainstorming, NGT & Multivoting Team Communication
11 Measure: Process & Probability
Process Maps & Documentation Basic Probability Concepts Central Limit Theorem
12 Distributions & Data Collection
Statistical Distributions Data Types & Measurement Scales Sampling & Data Collection Plans Descriptive Statistics
13 Graphical Methods & MSA
Graphical Methods Measurement System Analysis & Gage R&R Bias, Linearity, Stability & P/T
14 Process & Performance Capability
Process Performance vs Specifications Process Capability Studies Cp, Cpk, Pp, Ppk & Cpm Short-Term vs Long-Term Capability & Sigma Shift
15 Analyze: Exploratory Data Analysis
Multi-Vari Studies Correlation & Linear Regression
16 Hypothesis Testing
Hypothesis Testing Basics Tests for Means, Variances & Proportions
17 Gap & Root Cause Analysis
Gap Analysis Root Cause Analysis Tools
18 Design of Experiments
DoE Basic Terms Main Effects & Interaction Plots
19 Implementation Planning & Lean Tools
Implementation Planning & Pilots Waste Elimination Tools Cycle-Time Reduction & SMED Kaizen & Kaizen Blitz
20 Statistical Process Control
SPC Basics: Common vs Special Cause Rational Subgrouping Control Chart Selection & Construction
21 Sustaining Improvements & Lean Control
Control Plans Document Control, Training & Audits Plan-Do-Check-Act (PDCA) TPM & Visual Factory
Process Capability Studies
Key Takeaways Explain This Topic AI
A process capability study estimates how well a process can meet specifications for a defined CTQ, using representative data, known specs, and a valid variation model.
Before computing Cp/Cpk-type indices, confirm the process is in statistical control (stable) and that the data are approximately normal or handled with an appropriate method.
Characteristics must have clear operational definitions; specifications and tolerances must be the correct LSL/USL/target for that characteristic.
Rational sampling, independence assumptions, and measurement system adequacy (MSA) protect the study from garbage-in indices.
CSSGB BoK III.F.2 is Evaluate level: judge whether a capability study is valid and what its results mean—not just run software defaults.
Last updated: July 2026
Process Capability Studies (CSSGB BoK III.F.2 — Evaluate)
Quick Answer: A process capability study quantifies how well a stable process meets specifications for a chosen characteristic. Before trusting Cp, Cpk, Pp, or Ppk, confirm correct specs , a capable measurement system , statistical stability , and approximate normality (or a proper alternative). Evaluate-level skill means you can design the study and reject invalid “capability” claims.
What a Capability Study Is
A capability study answers: Given how this process currently runs, how does its variation and location compare with the allowed tolerance for this CTQ?
Typical study outputs:
- Estimates of mean and standard deviation (within-subgroup and/or overall)
- Capability indices (Cp, Cpk) and/or performance indices (Pp, Ppk), sometimes Cpm
- Estimated percent nonconforming or DPMO under a stated model
- Graphical evidence: control charts, histogram with specs, normal probability plot
Capability is a statement about a defined process and characteristic under the conditions sampled —not a permanent property of a machine nameplate.
Characteristics, Specifications, and Tolerances
Characteristic (Y): the measurable CTQ—diameter, cycle time, purity, pull strength, first-pass yield attribute rate, etc. Operationally define units, method, and time window.
Specifications: LSL, USL, and target T from the customer, drawing, regulation, or internal standard. Verify revision level; many “incapable” reports use obsolete limits.
Tolerance: for two-sided continuous specs, tolerance width = USL − LSL . Unilateral specs need one-sided analysis. Attribute requirements (for example “defectives ≤ 0.5%”) use different metrics (DPMO, yield)—do not force a variables Cp formula onto pure go/no-go data without a variables measurement.
Study input Evaluate question
Characteristic Is this the CTQ that drives customer pain?
Spec source Current, approved, and applicable to this product/process?
Units Same units for data and specs?
Target Midpoint of specs, or a different customer-preferred T?
Subgroup / sampling Does sampling match how the process generates variation?
Prerequisites: Stability First
Standard practice: estimate capability (Cp/Cpk using within-subgroup σ) only when the process is in statistical control . Out-of-control processes mix common-cause and special-cause variation; a single index then misrepresents future performance.
Stability checks before capability:
Choose an appropriate control chart for the data type and subgrouping (X-bar and R/S, I-MR, etc.).
Collect enough subgroups to see patterns (rules of thumb vary; many texts want ≥20–25 subgroups for a baseline study—know your organization’s standard).
Resolve special causes or stratify (different shifts, tools, materials) so each studied stream is stable.
Document the stable window used for the index calculation.
If leadership needs a number while the process is still chaotic, report process performance (Pp/Ppk from overall variation) as a snapshot of historical output , and clearly label that it is not a prediction of a controlled process. Do not market an out-of-control Ppk as “our capability.”
Prerequisites: Normality (and What If Not)
Classic Cp/Cpk interpretation (percent outside specs ≈ normal tail probabilities) assumes individuals are approximately normal (or that you work with a transformed metric that is).
Normality checks Green Belts use:
- Histogram shape (skew, heavy tails, multimodality)
- Normal probability plot (approx. straight line)
- Formal tests (Anderson–Darling, Shapiro–Wilk) as supporting evidence—not sole decision makers on small n
If non-normal:
Investigate mixtures (two machines, two cavities)—stratify and study each stream
Consider transformation (for example Box–Cox) and compute capability on the transformed scale carefully, converting conclusions back to original units for communication
- Use distribution-specific or nonparametric estimates of percent nonconforming
- For strongly skewed cycle times, report percentiles and empirical % beyond specs alongside any index
Multimodality often means the “process” is not one process—capability of a blend of two setups is a management fiction.
Measurement System and Sampling Design
MSA: If gage R&R is poor, capability indices measure the measurement system + process muddle. Ensure discrimination and %GR&R are acceptable for the tolerance before a high-stakes capability claim.
Sampling for a study:
Rational subgroups for within-σ estimates (consecutive pieces from the same stream)
Cover the full range of common-cause conditions you claim the index represents (materials lots, shifts)—or explicitly narrow the claim
- Avoid cherry-picking the “good week” after a firefight
- Record time order so control charts are possible
Sample size: More data tighten estimates of μ and σ and of the indices. Very small n produces wide uncertainty; treat single-digit capability claims with skepticism.
Study Workflow (Evaluate-Ready)
Define characteristic, CTQ link, specs/target, and population (product, line, period).
Validate measurement (MSA / operational definition).
Collect time-ordered data with planned subgrouping.
Assess stability on control charts; act on special causes or stratify.
Assess distribution shape; choose analysis path.
Estimate within and overall σ as needed; compute indices and % nonconforming.
Interpret with graphics: histogram + specs, capability plot, control chart appendix.
Report boundaries: what process, what time window, short-term vs long-term, assumptions.
Interpreting Study Results (Without the Formula Deep Dive)
High Cp, low Cpk → enough potential spread vs. tolerance, but off-center —adjust location.
Low Cp → process variation too large for the tolerance even if centered—reduce σ or relax specs (specs only with customer authority).
Pp/Ppk much lower than Cp/Cpk → extra long-term / between-subgroup variation—instability or unmodeled shifts over time.
Stable + capable → good candidate for control-phase monitoring; still re-verify after changes.
Worked scenario: A coating thickness study uses 25 subgroups of 5. X-bar and R charts show one out-of-control point from a wrong viscosity batch; after removing that special-cause subgroup (and fixing the cause), charts are stable, histogram is roughly normal, LSL/USL confirmed. Only then does the team publish Cpk = 1.33. Publishing Cpk with the bad batch left in would understate true common-cause capability and overstate chaos as if it were permanent—or the reverse, depending on how the outlier sits. The Evaluate skill is knowing the index is conditional on the cleaned, stable story you documented.
- Common Study Failures
- Specs wrong or one-sided treated as two-sided
- Capability computed during known process chaos
- Ignoring non-normality and multimodality
- Poor gage, rounded data, or inadequate discrimination
- Confusing a vendor’s short run with long-term plant performance
- Reporting four decimal places on Cpk when n is tiny
- Bottom Line for III.F.2
A process capability study is a structured evaluation : right characteristic, right specs, adequate measurement, stable process, suitable distributional assumptions, then indices and nonconformance estimates. Skip the prerequisites and the number is theater. Master the study logic so Cp/Cpk/Pp/Ppk (next section) are computed only when they mean something.