Study guide

Control Chart Selection & Construction

ASQ Certified Six Sigma Green Belt CSSGB

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

CSSGB Exam Facts & Logistics How to Study for an Open-Book ASQ Exam

2 Six Sigma Foundations

Value of Six Sigma & Quality Leaders Organizational Goals & Six Sigma Projects Organizational Drivers, KPIs & Scorecards

3 Lean Principles in the Organization

Lean Concepts Value Stream Mapping & Waste

4 Design for Six Sigma

DFSS Road Maps: DMADV & IDOV FMEA Basics & Risk Priority Number Design FMEA vs Process FMEA

5 Define: Project Identification

Project Selection & DMAIC Fit Process Elements & Boundaries Benchmarking Types SIPOC & Process Inputs/Outputs

6 Stakeholders & Voice of the Customer

Owners & Stakeholders Customer Identification Customer Data Collection CTQ, QFD & Kano

7 Project Management Core

Agile & Top-Down Project Methods Project Charter & Problem Statements Project Scope Tools Primary & Consequential Metrics

8 Planning, Risk & Closure

WBS, Gantt, CPM, PERT & Tollgates Project Documentation Project Risk Analysis & Management Project Closure & Lessons Learned

9 Management Tools & Business Results

Eight Management & Planning Tools DPU, RTY, CoPQ, DPMO & Sigma Level Organizational Communication

10 Team Dynamics & Performance

Team Stages & Negative Dynamics Six Sigma Roles & RACI Brainstorming, NGT & Multivoting Team Communication

11 Measure: Process & Probability

Process Maps & Documentation Basic Probability Concepts Central Limit Theorem

12 Distributions & Data Collection

Statistical Distributions Data Types & Measurement Scales Sampling & Data Collection Plans Descriptive Statistics

13 Graphical Methods & MSA

Graphical Methods Measurement System Analysis & Gage R&R Bias, Linearity, Stability & P/T

14 Process & Performance Capability

Process Performance vs Specifications Process Capability Studies Cp, Cpk, Pp, Ppk & Cpm Short-Term vs Long-Term Capability & Sigma Shift

15 Analyze: Exploratory Data Analysis

Multi-Vari Studies Correlation & Linear Regression

16 Hypothesis Testing

Hypothesis Testing Basics Tests for Means, Variances & Proportions

17 Gap & Root Cause Analysis

Gap Analysis Root Cause Analysis Tools

18 Design of Experiments

DoE Basic Terms Main Effects & Interaction Plots

19 Implementation Planning & Lean Tools

Implementation Planning & Pilots Waste Elimination Tools Cycle-Time Reduction & SMED Kaizen & Kaizen Blitz

20 Statistical Process Control

SPC Basics: Common vs Special Cause Rational Subgrouping Control Chart Selection & Construction

21 Sustaining Improvements & Lean Control

Control Plans Document Control, Training & Audits Plan-Do-Check-Act (PDCA) TPM & Visual Factory

Control Chart Selection & Construction

Key Takeaways Explain This Topic AI

Select the chart from data type (variables vs attribute), then subgroup size and whether sample size (area of opportunity) is constant.

Variables: I-MR for n = 1; X-bar/R for small n (about 2–9); X-bar/s for larger n; median charts are a robust alternative for small n.

Attribute defectives: np if n constant, p if n varies; defects: c if opportunity constant, u if opportunity varies.

Construction: time-ordered data, centerline from process average, control limits from process variation formulas (often ±3σ of the plotted statistic), dual charts for variables (location + dispersion).

Use decision tables and selection scenarios on the exam—do not default to X-bar/R for every problem.

Last updated: July 2026

Control Chart Selection & Construction (CSSGB BoK VI.A.3 — Apply)

Quick Answer: Choose the chart from data type → subgroup size / constant n → defectives vs defects . Variables: I-MR (n=1), X-bar/R (small n), X-bar/s (larger n), median (small-n alternative). Attributes: p/np for defectives; c/u for defects. Construct with time order, process-based centerline, and process-based control limits; use location and dispersion charts together for variables data.

Decision Table — Which Chart?

  • Data Subgroup / sample structure Chart
  • Continuous measurements n = 1 (one value per period) I-MR (XmR) — Individuals & Moving Range
  • Continuous Small subgroup, typically 2 ≤ n ≤ 9 X-bar and R
  • Continuous Larger subgroup, typically n ≥ 10 X-bar and s
  • Continuous Small n; want resistance to outliers Median (with range) chart
  • Fraction / % nonconforming (defectives) Sample size n varies p chart
  • Count of defectives Sample size n constant np chart
  • Count of defects (flaws) Area of opportunity constant c chart
  • Defects per unit (or per area) Area of opportunity varies u chart

Defectives vs defects:

Defective unit = whole item fail/pass (one decision per unit).

Defect = countable nonconformity; one unit can have many defects.

  • Variables Charts — Construction Essentials
  • X-bar and R (X̄–R)

Use when: continuous CTQ, rational subgroups of small n (often 3–5 in practice).

Plot:

  • X-bar chart: subgroup averages vs time
  • R chart: subgroup ranges vs time

Typical limits (constants from tables):

  • X-bar: CL = X̿ , UCL/LCL = X̿ ± A₂R̄
  • R: CL = R̄ , UCL = D₄R̄ , LCL = D₃R̄ (LCL may be 0 for small n)

Order of use: Evaluate the R chart first . If ranges are out of control, the within-σ estimate is unstable—do not trust X-bar limits until dispersion is stable.

X-bar and s (X̄–s)

Use when: continuous data with larger n (commonly n ≥ 10) so the sample standard deviation is a better dispersion statistic than R.

Plot: X-bar and s (subgroup sample SD).

Limits: X̿ ± A₃s̄ for averages; B₄s̄ / B₃s̄ style limits for s (table constants). Same philosophy as X̄–R with s replacing R.

I-MR / XmR (Individuals and Moving Range)

Use when: n = 1—batch processes, expensive tests, one reading per day, accounting metrics, or no natural rational subgroup.

Plot:

  • I chart: each individual xᵢ
  • MR chart: moving range MRᵢ = |xᵢ − xᵢ₋₁| (usually span 2)

Typical limits:

  • I: CL = X̄ , UCL/LCL = X̄ ± E₂MR̄ (equivalently X̄ ± 3(MR̄/d₂) with d₂ ≈ 1.128 for MR of 2)
  • MR: CL = MR̄ , UCL = D₄MR̄

Caution: Individuals charts are more sensitive to non-normality than X-bar charts (averages normalize by CLT). Still the correct default when n = 1.

Median Chart

Use when: small subgroup size and you want a location statistic less pulled by outliers than the mean, or when calculation simplicity on the floor matters.

Plot: subgroup median (and usually range). Slightly less statistically efficient than X-bar under normality, but Apply-level recognition: it is a valid variables option for small n—not the first default when X-bar is fine.

  • Attribute Charts — Construction Essentials
  • p Chart (fraction nonconforming)
  • Statistic: p̂ = (defectives in sample) / n

Use when: each unit is good/bad and n may change by period.

Limits: CL = p̄ , UCL/LCL = p̄ ± 3√[p̄(1−p̄)/nᵢ] — limits step when nᵢ changes.

np Chart

Statistic: number of defectives in the sample (np).

Use when: defectives data and n is constant .

Limits: based on n and p̄; simpler communication (“how many bad in each sample of 50”).

c Chart

Statistic: count of defects in a constant opportunity (e.g., defects per 100 m of cable, flaws per identical panel).

Limits: CL = c̄ , UCL/LCL = c̄ ± 3√c̄ (Poisson model). LCL floored at 0 when negative.

u Chart

Statistic: u = defects / opportunity size (defects per unit, per m², etc.) when opportunity varies .

Limits: ū ± 3√(ū/nᵢ) with nᵢ = opportunity size—limits vary with nᵢ.

  • Construction Checklist (All Charts)
  • Operational definition of the CTQ and of “defective” or “defect.”

Time-ordered sampling with rational subgroups (or n = 1 honestly).

Collect a baseline (often 20–25 subgroups for variables charts—follow your org’s standard).

Compute CL and trial control limits from process data.

Remove special-cause points only with cause identified (or stratify), then revise limits if policy allows.

Extend limits for ongoing control; react to signals with defined actions.

  • Never set control limits equal to specs “to make the chart look customer-focused.”
  • Worked Selection Scenarios

Scenario 1: Hourly, measure the diameter of four consecutive shafts from one lathe.

→ X-bar and R (continuous, small n = 4).

Scenario 2: One hardness reading per heat-treated batch; batches are sequential.

→ I-MR (n = 1).

Scenario 3: Each shift inspects exactly 200 switches; record how many fail continuity.

→ np chart (defectives, constant n). A p chart also works; np is natural when n fixed.

Scenario 4: Daily inspection sample size varies (80–150 claims); track fraction with coding errors.

→ p chart (defectives, varying n).

Scenario 5: Count paint defects on each identical door panel (same area every time).

→ c chart (defects, constant opportunity).

Scenario 6: Count scratches on glass sheets of different areas ; report defects per m².

→ u chart (defects, varying opportunity).

Scenario 7: Subgroups of n = 12 thickness readings per roll.

→ X-bar and s (continuous, larger n).

Scenario 8: Small n = 3; floor staff already plot medians and want outlier resistance.

→ Median and range chart is acceptable; X-bar/R remains the more common efficient choice if means are fine.

Using Charts (Apply Behaviors)

R or s (or MR) out of control → investigate variation sources (tool wear scatter, measurement, mixture) before over-interpreting averages.

X-bar or I out of control with stable dispersion → mean shift: setup, material lot, temperature, method change.

p or np rise → more defectives: process or incoming quality change.

c or u rise → more defects per opportunity: handling, contamination, process chaos.

After a sustained process improvement , recalculate limits so charts monitor the new common-cause system—not the old, worse baseline forever.

Common Selection Traps

  • Trap Fix
  • Using X-bar/R when only one measurement exists I-MR
  • Using c chart when sheet size changes u chart
  • Using np when daily n changes p chart
  • Calling every flaw a “defective” without a unit-level pass/fail rule Define defect vs defective
  • Plotting % defective on an X-bar chart without subgroup logic Use p/np
  • Setting UCL at USL Separate control from specs
  • Bottom Line for VI.A.3

Apply means you can walk from a process description to the right chart and know what to plot and why. Memorize the decision table: variables vs attribute, n = 1 vs small vs large n, constant vs varying opportunity, defectives vs defects. Construct with process-based limits, keep dual variables charts in the correct analysis order, and use signals to drive the right investigation.