Study guide
SPC Basics: Common vs Special Cause
ASQ Certified Six Sigma Green Belt CSSGB
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
CSSGB Exam Facts & Logistics How to Study for an Open-Book ASQ Exam
2 Six Sigma Foundations
Value of Six Sigma & Quality Leaders Organizational Goals & Six Sigma Projects Organizational Drivers, KPIs & Scorecards
3 Lean Principles in the Organization
Lean Concepts Value Stream Mapping & Waste
4 Design for Six Sigma
DFSS Road Maps: DMADV & IDOV FMEA Basics & Risk Priority Number Design FMEA vs Process FMEA
5 Define: Project Identification
Project Selection & DMAIC Fit Process Elements & Boundaries Benchmarking Types SIPOC & Process Inputs/Outputs
6 Stakeholders & Voice of the Customer
Owners & Stakeholders Customer Identification Customer Data Collection CTQ, QFD & Kano
7 Project Management Core
Agile & Top-Down Project Methods Project Charter & Problem Statements Project Scope Tools Primary & Consequential Metrics
8 Planning, Risk & Closure
WBS, Gantt, CPM, PERT & Tollgates Project Documentation Project Risk Analysis & Management Project Closure & Lessons Learned
9 Management Tools & Business Results
Eight Management & Planning Tools DPU, RTY, CoPQ, DPMO & Sigma Level Organizational Communication
10 Team Dynamics & Performance
Team Stages & Negative Dynamics Six Sigma Roles & RACI Brainstorming, NGT & Multivoting Team Communication
11 Measure: Process & Probability
Process Maps & Documentation Basic Probability Concepts Central Limit Theorem
12 Distributions & Data Collection
Statistical Distributions Data Types & Measurement Scales Sampling & Data Collection Plans Descriptive Statistics
13 Graphical Methods & MSA
Graphical Methods Measurement System Analysis & Gage R&R Bias, Linearity, Stability & P/T
14 Process & Performance Capability
Process Performance vs Specifications Process Capability Studies Cp, Cpk, Pp, Ppk & Cpm Short-Term vs Long-Term Capability & Sigma Shift
15 Analyze: Exploratory Data Analysis
Multi-Vari Studies Correlation & Linear Regression
16 Hypothesis Testing
Hypothesis Testing Basics Tests for Means, Variances & Proportions
17 Gap & Root Cause Analysis
Gap Analysis Root Cause Analysis Tools
18 Design of Experiments
DoE Basic Terms Main Effects & Interaction Plots
19 Implementation Planning & Lean Tools
Implementation Planning & Pilots Waste Elimination Tools Cycle-Time Reduction & SMED Kaizen & Kaizen Blitz
20 Statistical Process Control
SPC Basics: Common vs Special Cause Rational Subgrouping Control Chart Selection & Construction
21 Sustaining Improvements & Lean Control
Control Plans Document Control, Training & Audits Plan-Do-Check-Act (PDCA) TPM & Visual Factory
SPC Basics: Common vs Special Cause
Key Takeaways Explain This Topic AI
SPC uses control charts built from process data so teams can separate common-cause variation from special-cause variation and act accordingly.
Common-cause variation is the stable, inherent noise of the current system; special-cause variation is assignable, unexpected, and should be investigated.
Continuous (variables) data measure on a continuous scale; discrete (attribute) data count defectives or defects—chart choice follows data type.
Points outside control limits or non-random patterns (runs, trends, cycles) signal special causes; random scatter within limits indicates a process in statistical control.
Control limits come from process data (voice of the process); they are not the same as customer specification limits.
Last updated: July 2026
SPC Basics: Common vs Special Cause (CSSGB BoK VI.A.1 — Analyze)
Quick Answer: Statistical process control (SPC) monitors a process with control charts so you can tell common-cause variation (stable system noise—improve the system) from special-cause variation (assignable events—find and remove the cause). Points beyond control limits or non-random patterns flag special causes; random scatter inside limits means the process is in statistical control .
Objectives of SPC
Walter Shewhart’s control chart idea is the backbone of the Control phase and of ongoing process management. SPC is not about “checking every unit against the print.” It is about predictability :
Detect change quickly — know when the process has shifted or become unstable.
Avoid over-adjustment — do not chase every wiggle that is only common cause (tampering increases variation).
Guide the right improvement type — special causes get local investigation; common-cause problems need process redesign, standard work, or capability projects.
Sustain gains after DMAIC so the improved process does not silently drift.
Communicate with data — one chart often ends debates about “whether quality got worse.”
In control means the process is stable and predictable within its current common-cause system. It does not automatically mean the process meets specifications (that is capability—BoK III.F).
Continuous vs Discrete Data
Chart families split first on what you measure .
Data type Also called Examples Typical SPC charts
Continuous Variables, measured Thickness (mm), time (s), temperature (°C), fill weight (g) I-MR, X-bar/R, X-bar/s, median
Discrete Attribute, counted Pass/fail units; number of defects on a board p, np, c, u
Continuous data take values on a continuum (or a fine measurement scale). You estimate mean and dispersion and chart both (location chart + range/s chart).
Discrete data for SPC usually means:
Defectives — each item is conforming or nonconforming (binomial setting) → p or np charts.
Defects — countable flaws that can appear more than once per unit or per area (Poisson-like setting) → c or u charts.
Exam tip: “Percent defective” or “fraction nonconforming” → attribute (p/np). “Scratches per panel” or “defects per unit” → c/u. “Diameter in mm” → variables chart.
If you can measure the characteristic continuously, variables charts are usually more informative for the same sample size than go/no-go attribute charts.
Common-Cause vs Special-Cause Variation
Deming and Shewhart framed management action around two kinds of variation.
- Common-cause variation
- Always present in the current process as designed and operated
Many small, ordinary sources (material lot micro-variation, ambient conditions, operator micro-differences within standard method)
Produces a stable , random pattern on a well-designed control chart
Improving common-cause performance requires changing the system (method, equipment, design, training standard)—not hunting a one-off “who messed up?”
- Special-cause variation (assignable cause)
- Not part of the usual system noise
- Linked to a specific event, shift, tool, batch, or method change
- Produces signals on the control chart
- First response: investigate, contain if needed, remove or control the cause, then restore stability
- Common cause Special cause
- Nature Inherent, chronic Sporadic, assignable
- Chart look Random within limits Outliers, runs, trends, cycles
- Typical action System improvement project Local investigation and correction
- Wrong reaction Blame the last operator for every point Ignore out-of-control signals as “noise”
Over-control (tampering): adjusting the process for every common-cause wiggle adds extra variation. Under-control: ignoring special-cause signals lets problems grow. Analyze-level skill is matching the reaction to the type of variation.
How Variation Type Is Deduced from Control Charts
A control chart plots a statistic (individual, subgroup average, proportion, count) in time order with:
Centerline (CL) — usually the process average of the plotted statistic
Upper control limit (UCL) and lower control limit (LCL) — typically set at about ±3 standard errors of the plotted statistic (Shewhart 3-sigma limits), calculated from process data , not from specs
Signals of special-cause variation
Classic rules (Western Electric / Nelson-style patterns; exact set varies by organization—know the logic):
- One point beyond UCL or LCL — strongest single-point special-cause signal
- Run on one side of the centerline — e.g., 7–9 consecutive points above or below CL (a sustained shift)
- Trend — e.g., 6–7 consecutive increasing or decreasing points
- Two of three consecutive points in the outer third (beyond 2σ from CL on the same side)
- Cycles or systematic patterns — alternating high/low, shift-to-shift zigzags that are not random
Hug the centerline unusually tightly — sometimes a calculation error, stratified subgrouping, or reduced variation worth confirming
If none of these appear and points bounce randomly inside the limits, treat the process as in statistical control : only common-cause variation is acting at a detectable level.
Worked interpretation sketch
An X-bar chart for fill weight runs for 30 subgroups. Points scatter around the centerline with none outside UCL/LCL and no long runs. Conclusion: common-cause system—predictable at the current mean and within-subgroup variation. If capability is poor, launch a system project (reduce σ or retarget μ), not a witch hunt for each subgroup.
Next week, three consecutive X-bar points sit above the UCL after a new supplier lot arrives. Conclusion: special-cause signal—quarantine product if needed, check the lot, measurement, and setup; do not average the bad points into “the new normal” until the cause is understood.
Control Limits vs Specification Limits (Again)
- Limit type Source Purpose
- Control limits Process data formulas Detect special causes; voice of the process
- Specification limits Customer / drawing / regulation Judge conforming vs nonconforming units
A point can be inside control limits and outside specs (stable but incapable). A point can be outside control limits yet still inside specs (unstable but currently “lucky”). Analyze both questions separately.
Practical SPC Workflow
Define the CTQ and operational definition; confirm measurement adequacy.
Choose data type and subgrouping (next sections).
Collect time-ordered data; compute CL and control limits from a baseline in control (or recalculate carefully after process change).
Plot ongoing points; apply rules; react to special causes.
When stable, use capability analysis if specs matter; improve the common-cause system if needed.
Keep the chart live in Control so gains stick.
Bottom Line for VI.A.1
SPC’s objective is stable, predictable processes through statistical separation of variation types. Continuous vs discrete data determine chart families. Common cause = inherent system noise → improve the system. Special cause = assignable signal on the chart → investigate and remove. Master reading the chart so you analyze variation correctly instead of guessing.