Study guide
7.4 Tank Mixing, Product Concentration & Dilution Calculations
Connecticut Pesticide Applicator Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Connecticut Pesticide Law, Certification & DEEP Rules
1.1 DEEP, the Pesticide Control Act & Certification Classes 1.2 Exams, Fees, Retests, Oral Board & Renewal 1.3 Supervisors, Operators & Written Instructions 1.4 Records, Annual Use Summaries & Business Registration 1.5 Customer Notice, Neighbor Registry & Posting Signs 1.6 Schools, Day Care Centers, Playgrounds & State Agencies 1.7 Connecticut Use Restrictions, Water Protection & Aquatic Permits 1.8 Inspections, Prohibited Acts & Penalties
2 Chapter 2: Federal Pesticide Law, Labels & Worker Protection
2.1 FIFRA Framework, EPA Authority & Restricted Use Pesticides 2.2 Reading the Pesticide Label: Mandatory Language & Signal Words 2.3 Precautionary Statements, First Aid & Hazards to Humans 2.4 Worker Protection Standard, REI & PHI
3 Chapter 3: Pesticide Formulations, Chemistry & Adjuvants
3.1 Liquid Formulations: EC, Solutions, Emulsions & Flowables 3.2 Dry Formulations: Dusts, Granules, Pellets & Wettable Powders 3.3 Adjuvants, Surfactants & Tank-Mix Compatibility
4 Chapter 4: Toxicology, Human Health & Personal Protective Equipment
4.1 Principles of Pesticide Toxicology: Acute vs. Chronic Toxicity & Exposure Routes 4.2 Symptoms of Poisoning, Cholinesterase Inhibition & First Aid 4.3 Personal Protective Equipment Selection, Chemical Resistance & Maintenance 4.4 Respiratory Protection: Types, Filters, Cartridges & Fit Testing
5 Chapter 5: Environment, Pollinators & Pest Management
5.1 Pesticide Environmental Fate: Adsorption, Solubility & Degradation 5.2 Drift Mitigation, Groundwater Protection & Long Island Sound Watershed 5.3 Non-Target Species, Pollinator Protection & Endangered Species 5.4 Pest Identification & Pest Management Methods 5.5 Integrated Pest Management (IPM), Thresholds & Resistance
6 Chapter 6: Transport, Storage, Spills, Mixing & Disposal
6.1 Transporting, Storing & Securing Pesticides 6.2 Spills, Fires & Emergency Response 6.3 Mixing, Loading, Container Disposal & Professionalism
7 Chapter 7: Application Equipment, Calibration & Dosage Calculations
7.1 Application Equipment, Nozzles & Operation 7.2 Liquid Sprayer Calibration Math: GPA, GPM & Speed Calculations 7.3 Granular Equipment Calibration & Geometric Area Calculations 7.4 Tank Mixing, Product Concentration & Dilution Calculations
7.4 Tank Mixing, Product Concentration & Dilution Calculations
Key Takeaways Explain This Topic AI
To determine dry formulated product needed when rates are given in pounds of active ingredient (a.i.) per acre, divide the desired a.i. by the decimal concentration of the product: Product Needed (lbs) = Desired a.i. (lbs) / % a.i. (decimal).
Liquid formulation names indicate active ingredient concentration in pounds per gallon (e.g., 4 EC contains 4.0 lbs a.i./gal); product volume equals desired a.i. divided by pounds a.i. per gallon.
Sprayer tank load calculations depend on calibrated application volume: Area per Tank (acres) = Tank Capacity (gal) / Application Rate (GPA).
Percentage active ingredient spray solutions are calculated using the density of water (8.34 lbs/gal): Gallons of Product = (Tank Gal × Desired % × 8.34) / (lbs a.i./gal × 100).
In aquatic and greenhouse applications, parts per million (ppm) calculations utilize the constant that one acre-foot of water weighs approximately 2.7 million pounds: Pounds a.i. = Acre-feet × 2.7 × Desired ppm.
Last updated: October 2026
7.4 Tank Mixing, Product Concentration & Dilution Calculations
Accurate tank mixing and dosage calculations represent the critical operational bridge between pesticide label directions and real-world field application. Pesticide manufacturers formulate active ingredients (a.i.) in concentrated dry powders, granules, emulsifiable liquids, or water-soluble solutions. Because commercial labels specify application rates in various metric and imperial units—such as pounds of active ingredient per acre, fluid ounces of commercial product per 1,000 square feet, percentage solution concentration, or parts per million (ppm)—applicators must master the mathematical procedures for mixing tank loads without error. Under-dosing leads to pest control failure and accelerates pesticide resistance, while overdosing violates state and federal law, destroys crops or turf, and contaminates public water supplies.
Dry Formulations: Active Ingredient vs. Formulated Product
Pesticide labels for dry formulations—including wettable powders (WP), water-dispersible granules (WDG), dry flowables (DF), and soluble powders (SP)—frequently state the legal application rate in terms of pounds of active ingredient (a.i.) per acre . Because a dry formulated product contains inert ingredients (carriers, wetting agents, dispersants) in addition to the pure chemical active ingredient, the weight of formulated product added to the tank must always exceed the weight of pure active ingredient prescribed by the label. DRY FORMULATION ACTIVE INGREDIENT RELATIONSHIP
A 75 WP formulation contains 75% active ingredient and 25% inert carrier.
To get 1.0 lb of pure active ingredient onto the target site:
1.0 lb pure a.i. ÷ 0.75 (% a.i.) = 1.33 lbs 75 WP Product
- ┌──────────────────────────────────────────────────────────────────────────┐
- │ DRY FORMULATION FORMULA │
- │ │
- │ Desired Active Ingredient (lbs) │
- │ Pounds of Product Needed = ──────────────────────────────── │
- │ % a.i. in formulation (as a decimal) │
- └──────────────────────────────────────────────────────────────────────────┘
- Step-by-Step Worked Example: Dry Formulation
An agricultural applicator is preparing to spray a 40-acre sweet corn field in the Connecticut River Valley. The herbicide label mandates an application rate of 1.5 lbs a.i. per acre 1.5\text{ lbs a.i. per acre} 1.5 lbs a.i. per acre . The commercial product is formulated as an 75 WP 75\text{ WP} 75 WP (a wettable powder containing 75 % 75\% 75% active ingredient by weight).
Convert percentage to decimal: 75 % = 0.75 75\% = 0.75 75% = 0.75
Calculate pounds of 75 WP product needed per acre: Product per Acre = 1.5 lbs a.i. 0.75 = 2.0 pounds of 75 WP product per acre \text{Product per Acre} = \frac{1.5\text{ lbs a.i.}}{0.75} = 2.0\text{ pounds of 75 WP product per acre} Product per Acre = 0.75 1.5 lbs a.i. = 2.0 pounds of 75 WP product per acre
Calculate total product needed for 40 acres: Total Product = 2.0 lbs/acre × 40 acres = 80.0 pounds of 75 WP \text{Total Product} = 2.0\text{ lbs/acre} \times 40\text{ acres} = 80.0\text{ pounds of 75 WP} Total Product = 2.0 lbs/acre × 40 acres = 80.0 pounds of 75 WP
Operational verification: The applicator must weigh out exactly 80.0 pounds 80.0\text{ pounds} 80.0 pounds of the 75 WP product across the required sprayer tank loads to treat the 40-acre field.
Liquid Formulations: Active Ingredient per Gallon
Liquid pesticide formulations—such as emulsifiable concentrates (EC), liquid flowables (F/L), microencapsulated suspensions (ME), and solutions (S)—are packaged with active ingredients dissolved or suspended in liquid carriers. The concentration is designated by the number of pounds of pure active ingredient contained within one gallon of formulated product. DECODING LIQUID FORMULATION LABELS
- 4 EC or 4L = 4.0 pounds of active ingredient per gallon of product
- 2.4 EC = 2.4 pounds of active ingredient per gallon of product
- 6 EC = 6.0 pounds of active ingredient per gallon of product
- 1.5 EC = 1.5 pounds of active ingredient per gallon of product
- ┌──────────────────────────────────────────────────────────────────────────┐
- │ LIQUID FORMULATION FORMULA │
- │ │
- │ Desired Active Ingredient (lbs) │
- │ Gallons of Product Needed = ──────────────────────────────── │
- │ Pounds a.i. per gallon of concentrate │
- └──────────────────────────────────────────────────────────────────────────┘
- Step-by-Step Worked Example: Liquid Formulation
A commercial applicator is treating a 25-acre sod farm. The insecticide label specifies an application rate of 0.75 lbs a.i. per acre 0.75\text{ lbs a.i. per acre} 0.75 lbs a.i. per acre . The product purchased is Permethrin 4L , a liquid flowable containing 4.0 lbs a.i. per gallon 4.0\text{ lbs a.i. per gallon} 4.0 lbs a.i. per gallon .
Calculate gallons of formulated product needed per acre: Gallons per Acre = 0.75 lbs a.i. 4.0 lbs a.i./gal = 0.1875 gallons per acre \text{Gallons per Acre} = \frac{0.75\text{ lbs a.i.}}{4.0\text{ lbs a.i./gal}} = 0.1875\text{ gallons per acre} Gallons per Acre = 4.0 lbs a.i./gal 0.75 lbs a.i. = 0.1875 gallons per acre
Convert decimal gallons to fluid ounces per acre:
There are 128 fluid ounces 128\text{ fluid ounces} 128 fluid ounces in one gallon: Fluid Ounces per Acre = 0.1875 gal × 128 fl oz/gal = 24.0 fluid ounces per acre \text{Fluid Ounces per Acre} = 0.1875\text{ gal} \times 128\text{ fl oz/gal} = 24.0\text{ fluid ounces per acre} Fluid Ounces per Acre = 0.1875 gal × 128 fl oz/gal = 24.0 fluid ounces per acre
Calculate total product needed for 25 acres:
In gallons: Total Gallons = 0.1875 gal/acre × 25 acres = 4.6875 gallons \text{Total Gallons} = 0.1875\text{ gal/acre} \times 25\text{ acres} = 4.6875\text{ gallons} Total Gallons = 0.1875 gal/acre × 25 acres = 4.6875 gallons
In fluid ounces: Total Fluid Ounces = 24.0 fl oz/acre × 25 acres = 600.0 fluid ounces \text{Total Fluid Ounces} = 24.0\text{ fl oz/acre} \times 25\text{ acres} = 600.0\text{ fluid ounces} Total Fluid Ounces = 24.0 fl oz/acre × 25 acres = 600.0 fluid ounces
Convert to standard liquid containers:
600 fl oz ÷ 128 = 4 full gallons 600\text{ fl oz} \div 128 = 4\text{ full gallons} 600 fl oz ÷ 128 = 4 full gallons , with a remainder of 88 fluid ounces 88\text{ fluid ounces} 88 fluid ounces ( 4 gallons, 2 quarts, and 24 fl oz 4\text{ gallons, } 2\text{ quarts, and } 24\text{ fl oz} 4 gallons, 2 quarts, and 24 fl oz ).
Small-Scale, Turf & Ornamental Mixing Calculations
In structural pest control, commercial lawn care, greenhouse production, and landscape ornamental maintenance, application rates are rarely expressed in acres. Instead, labels provide rates in fluid ounces or pounds of formulated product per 1,000 square feet . TURF & ORNAMENTAL DOSAGE CALCULATION
- ┌──────────────────────┐ ┌──────────────────────┐ ┌──────────────────────┐
- │ TOTAL SQUARE FEET │ ÷ │ 1,000 SQ FT │ = │ NUMBER OF UNITS │
- │ (e.g., 35,000) │ │ (Base Unit) │ │ (35.0) │
- └──────────────────────┘ └──────────────────────┘ └──────────┬───────────┘
- │
- ┌──────────────────────┐ ┌──────────────────────┐ │
- │ TOTAL PRODUCT NEEDED │ = │ LABEL RATE / UNIT │ × <────────────┘
- │ (87.5 Fluid Ounces)│ │ (2.5 fl oz/unit) │
- └──────────────────────┘ └──────────────────────┘
- Worked Example 1: Product per 1,000 Square Feet
A commercial lawn care operator is applying a post-emergence broadleaf herbicide to a residential turf property measuring 35 , 000 square feet 35,000\text{ square feet} 35 , 000 square feet . The label directs the applicator to apply 2.5 fluid ounces 2.5\text{ fluid ounces} 2.5 fluid ounces of product per 1 , 000 square feet 1,000\text{ square feet} 1 , 000 square feet .
Determine the number of 1,000-square-foot units: Units = 35 , 000 sq ft 1 , 000 sq ft = 35.0 units \text{Units} = \frac{35,000\text{ sq ft}}{1,000\text{ sq ft}} = 35.0\text{ units} Units = 1 , 000 sq ft 35 , 000 sq ft = 35.0 units
Calculate total chemical concentrate needed: Total Product = 35.0 units × 2.5 fl oz/unit = 87.5 fluid ounces \text{Total Product} = 35.0\text{ units} \times 2.5\text{ fl oz/unit} = 87.5\text{ fluid ounces} Total Product = 35.0 units × 2.5 fl oz/unit = 87.5 fluid ounces
Volumetric container breakdown:
87.5 fl oz = 2 quarts (64 fl oz) + 23.5 fluid ounces 87.5\text{ fl oz} = 2\text{ quarts (64 fl oz)} + 23.5\text{ fluid ounces} 87.5 fl oz = 2 quarts (64 fl oz) + 23.5 fluid ounces (or 0.684 gallons 0.684\text{ gallons} 0.684 gallons ).
Tank Load Management: Area Covered per Tank
Applicators must determine how many acres or square feet their sprayer tank covers before running empty, and how much chemical concentrate must be added to each full and partial tank load.
Area Covered per Tank (Acres) = Tank Capacity (gallons) Application Rate (GPA) \text{Area Covered per Tank (Acres)} = \frac{\text{Tank Capacity (gallons)}}{\text{Application Rate (GPA)}} Area Covered per Tank (Acres) = Application Rate (GPA) Tank Capacity (gallons)
Area Covered per Tank (sq ft) = Tank Capacity (gallons) Application Rate (Gal per 1,000 sq ft) × 1 , 000 \text{Area Covered per Tank (sq ft)} = \frac{\text{Tank Capacity (gallons)}}{\text{Application Rate (Gal per 1,000 sq ft)}} \times 1,000 Area Covered per Tank (sq ft) = Application Rate (Gal per 1,000 sq ft) Tank Capacity (gallons) × 1 , 000
Worked Example 2: Determining Tank Loads
A commercial lawn rig has a 300 -gallon 300\text{-gallon} 300 -gallon tank. The sprayer is calibrated to apply 2.0 gallons 2.0\text{ gallons} 2.0 gallons of water per 1 , 000 square feet 1,000\text{ square feet} 1 , 000 square feet . The applicator must treat a corporate office park with 120 , 000 square feet 120,000\text{ square feet} 120 , 000 square feet of turf using a fungicide labeled at 4.0 fl oz 4.0\text{ fl oz} 4.0 fl oz per 1 , 000 sq ft 1,000\text{ sq ft} 1 , 000 sq ft .
Determine area covered by one full tank load: Area per Tank = 300 gallons 2.0 gal / 1,000 sq ft × 1 , 000 = 150 × 1 , 000 = 150 , 000 square feet \text{Area per Tank} = \frac{300\text{ gallons}}{2.0\text{ gal / 1,000 sq ft}} \times 1,000 = 150 \times 1,000 = 150,000\text{ square feet} Area per Tank = 2.0 gal / 1,000 sq ft 300 gallons × 1 , 000 = 150 × 1 , 000 = 150 , 000 square feet
A full tank covers 150 , 000 sq ft 150,000\text{ sq ft} 150 , 000 sq ft . Because the entire property is 120 , 000 sq ft 120,000\text{ sq ft} 120 , 000 sq ft , the applicator only needs a single partial tank load!
Determine water carrier volume needed for 120 , 000 sq ft 120,000\text{ sq ft} 120 , 000 sq ft : Water Needed = 120 , 000 sq ft 1 , 000 sq ft × 2.0 gal = 120 × 2.0 = 240.0 gallons of water \text{Water Needed} = \frac{120,000\text{ sq ft}}{1,000\text{ sq ft}} \times 2.0\text{ gal} = 120 \times 2.0 = 240.0\text{ gallons of water} Water Needed = 1 , 000 sq ft 120 , 000 sq ft × 2.0 gal = 120 × 2.0 = 240.0 gallons of water
Determine chemical concentrate added to the 240 gallons of water: Chemical Needed = 120 units × 4.0 fl oz/unit = 480.0 fluid ounces \text{Chemical Needed} = 120\text{ units} \times 4.0\text{ fl oz/unit} = 480.0\text{ fluid ounces} Chemical Needed = 120 units × 4.0 fl oz/unit = 480.0 fluid ounces
In gallons: 480.0 ÷ 128 = 3.75 gallons 480.0 \div 128 = 3.75\text{ gallons} 480.0 ÷ 128 = 3.75 gallons ( 3 gallons and 3 quarts 3\text{ gallons and } 3\text{ quarts} 3 gallons and 3 quarts ). The applicator loads 240 gallons 240\text{ gallons} 240 gallons of water and mixes in 3.75 gallons 3.75\text{ gallons} 3.75 gallons of fungicide.
Percentage Spray Solutions
Certain pesticide labels specify application concentration as a percentage of active ingredient (% a.i.) or a percentage by volume (% v/v) . This is standard in utility brush control, rights-of-way weed eradication, greenhouse drenching, and structural termiticide applications.
Percentage by Weight Formula for Liquid Concentrates
Because chemical concentrates have different active ingredient densities and water weighs 8.34 pounds per gallon 8.34\text{ pounds per gallon} 8.34 pounds per gallon , calculating a percentage by weight solution requires accounting for water density and formulation strength:
Gallons of Concentrate = Tank Volume (gal) × Desired % a.i. × 8.34 lbs/gal Pounds a.i. per gallon of concentrate × 100 \text{Gallons of Concentrate} = \frac{\text{Tank Volume (gal)} \times \text{Desired } \% \text{ a.i.} \times 8.34\text{ lbs/gal}}{\text{Pounds a.i. per gallon of concentrate} \times 100} Gallons of Concentrate = Pounds a.i. per gallon of concentrate × 100 Tank Volume (gal) × Desired % a.i. × 8.34 lbs/gal
Step-by-Step Worked Example: Percentage by Weight
An applicator is preparing a 50 -gallon 50\text{-gallon} 50 -gallon skid sprayer to spot-treat woody invasive brush (multiflora rose and autumn olive) along an electric utility corridor in eastern Connecticut. The label calls for a 1.5 % 1.5\% 1.5% active ingredient solution . The herbicide concentrate is a 4 L 4L 4 L formulation containing 4.0 lbs a.i. per gallon 4.0\text{ lbs a.i. per gallon} 4.0 lbs a.i. per gallon .
Identify the variables:
- Tank Volume = 50 gallons \text{Tank Volume} = 50\text{ gallons} Tank Volume = 50 gallons
- Desired % = 1.5 % \text{Desired } \% = 1.5\% Desired % = 1.5%
- Density of Water = 8.34 lbs/gal \text{Density of Water} = 8.34\text{ lbs/gal} Density of Water = 8.34 lbs/gal
Concentrate Strength = 4.0 lbs a.i./gal \text{Concentrate Strength} = 4.0\text{ lbs a.i./gal} Concentrate Strength = 4.0 lbs a.i./gal
Apply the formula: Gallons of Concentrate = 50 × 1.5 × 8.34 4.0 × 100 = 625.5 400 ≈ 1.564 gallons \text{Gallons of Concentrate} = \frac{50 \times 1.5 \times 8.34}{4.0 \times 100} = \frac{625.5}{400} \approx 1.564\text{ gallons} Gallons of Concentrate = 4.0 × 100 50 × 1.5 × 8.34 = 400 625.5 ≈ 1.564 gallons
Convert to fluid ounces: 1.564 gal × 128 fl oz/gal ≈ 200.2 fluid ounces 1.564\text{ gal} \times 128\text{ fl oz/gal} \approx 200.2\text{ fluid ounces} 1.564 gal × 128 fl oz/gal ≈ 200.2 fluid ounces
Mixing procedure: The applicator adds approximately 30 gallons 30\text{ gallons} 30 gallons of water to the tank, pours in 200 fluid ounces 200\text{ fluid ounces} 200 fluid ounces ( 1 gallon, 2 quarts, and 8 fl oz 1\text{ gallon, } 2\text{ quarts, and } 8\text{ fl oz} 1 gallon, 2 quarts, and 8 fl oz ) of herbicide concentrate with agitation running, and fills with water to the final 50 -gallon 50\text{-gallon} 50 -gallon mark.
Simple Percentage by Volume (v/v)
If a label directs the applicator to mix a " 2 % solution by volume 2\% \text{ solution by volume} 2% solution by volume " (volume-to-volume ratio):
Gallons of Product = Tank Volume (gal) × Desired % 100 \text{Gallons of Product} = \text{Tank Volume (gal)} \times \frac{\text{Desired } \%}{100} Gallons of Product = Tank Volume (gal) × 100 Desired %
For a 50 -gallon 50\text{-gallon} 50 -gallon tank at 2 % 2\% 2% v/v: Product Needed = 50 gal × 0.02 = 1.0 gallon of product \text{Product Needed} = 50\text{ gal} \times 0.02 = 1.0\text{ gallon of product} Product Needed = 50 gal × 0.02 = 1.0 gallon of product The applicator mixes 1.0 gallon 1.0\text{ gallon} 1.0 gallon of chemical concentrate with 49.0 gallons 49.0\text{ gallons} 49.0 gallons of water.
Parts per Million (ppm) & Aquatic Acre-Foot Calculations
In greenhouse mist systems, commercial sanitizing, and aquatic weed management in Connecticut lakes and ponds (governed by CT DEEP under Category 5 Aquatic Pest Control), treatment dosages are frequently prescribed in parts per million (ppm) . AQUATIC ACRE-FOOT DOSAGE PRINCIPLE
- 1 Acre-Foot = 1 surface acre covered to a depth of 1 foot
- = 43,560 cubic feet
- = 325,851 gallons of water
Weight of 1 Acre-Foot of Water:
325,851 gallons × 8.34 lbs/gal ≈ 2,717,600 lbs ≈ 2.7 Million Pounds
- ┌──────────────────────────────────────────────────────────────────────────┐
- │ PARTS PER MILLION (PPM) FORMULA │
- │ │
- │ Pounds of Active Ingredient = Acre-Feet × 2.7 × Desired ppm │
- └──────────────────────────────────────────────────────────────────────────┘
- Principles of PPM and Acre-Feet
Definition of PPM: One part per million equals one pound of chemical active ingredient in one million pounds of water ( 1 mg/L 1\text{ mg/L} 1 mg/L in metric measurement).
The Acre-Foot: An acre-foot represents the volume of water covering one surface acre ( 43 , 560 sq ft 43,560\text{ sq ft} 43 , 560 sq ft ) to a depth of exactly one foot ( 43 , 560 cu ft 43,560\text{ cu ft} 43 , 560 cu ft ).
Water Volume in Gallons: There are 7.48 gallons 7.48\text{ gallons} 7.48 gallons per cubic foot of water: 1 acre-foot = 43 , 560 cu ft × 7.48 gal/cu ft ≈ 325 , 829 to 325 , 851 gallons 1\text{ acre-foot} = 43,560\text{ cu ft} \times 7.48\text{ gal/cu ft} \approx 325,829\text{ to } 325,851\text{ gallons} 1 acre-foot = 43 , 560 cu ft × 7.48 gal/cu ft ≈ 325 , 829 to 325 , 851 gallons
Weight of an Acre-Foot of Water: Water weighs 8.34 lbs/gal 8.34\text{ lbs/gal} 8.34 lbs/gal : 325 , 851 gallons × 8.34 lbs/gal ≈ 2 , 717 , 600 pounds ≈ 2.7 million pounds 325,851\text{ gallons} \times 8.34\text{ lbs/gal} \approx 2,717,600\text{ pounds} \approx 2.7\text{ million pounds} 325 , 851 gallons × 8.34 lbs/gal ≈ 2 , 717 , 600 pounds ≈ 2.7 million pounds
Because one acre-foot of water weighs 2.7 million pounds 2.7\text{ million pounds} 2.7 million pounds , adding 2.7 pounds 2.7\text{ pounds} 2.7 pounds of pure active ingredient to one acre-foot yields exactly 1.0 ppm 1.0\text{ ppm} 1.0 ppm !
Step-by-Step Worked Example: Aquatic Herbicide Treatment
A Category 5 aquatic supervisor, working under a DEEP aquatic permit (CGS § 22a-66z), is contracted to treat an irrigation holding pond in Hartford County infested with invasive Eurasian watermilfoil. The pond has a surface area of 3.0 acres 3.0\text{ acres} 3.0 acres and an average depth of 4.0 feet 4.0\text{ feet} 4.0 feet . The aquatic herbicide label directs the applicator to establish a target concentration of 2.0 ppm active ingredient 2.0\text{ ppm active ingredient} 2.0 ppm active ingredient . The product is formulated as an aquatic liquid containing 2.0 lbs a.i. per gallon 2.0\text{ lbs a.i. per gallon} 2.0 lbs a.i. per gallon .
Calculate the total water volume in acre-feet: Acre-Feet = Surface Acres × Average Depth (ft) \text{Acre-Feet} = \text{Surface Acres} \times \text{Average Depth (ft)} Acre-Feet = Surface Acres × Average Depth (ft) Acre-Feet = 3.0 acres × 4.0 ft = 12.0 acre-feet \text{Acre-Feet} = 3.0\text{ acres} \times 4.0\text{ ft} = 12.0\text{ acre-feet} Acre-Feet = 3.0 acres × 4.0 ft = 12.0 acre-feet
Calculate the total weight of water: 12.0 acre-feet × 2.7 million lbs/acre-ft = 32.4 million pounds of water 12.0\text{ acre-feet} \times 2.7\text{ million lbs/acre-ft} = 32.4\text{ million pounds of water} 12.0 acre-feet × 2.7 million lbs/acre-ft = 32.4 million pounds of water
Calculate total pounds of active ingredient required: Pounds a.i. = Acre-Feet × 2.7 × Desired ppm \text{Pounds a.i.} = \text{Acre-Feet} \times 2.7 \times \text{Desired ppm} Pounds a.i. = Acre-Feet × 2.7 × Desired ppm Pounds a.i. = 12.0 × 2.7 × 2.0 = 64.8 pounds of active ingredient \text{Pounds a.i.} = 12.0 \times 2.7 \times 2.0 = 64.8\text{ pounds of active ingredient} Pounds a.i. = 12.0 × 2.7 × 2.0 = 64.8 pounds of active ingredient
Calculate gallons of formulated herbicide product needed:
The product contains 2.0 lbs a.i. per gallon 2.0\text{ lbs a.i. per gallon} 2.0 lbs a.i. per gallon : Gallons of Product = 64.8 lbs a.i. 2.0 lbs a.i./gal = 32.4 gallons of herbicide product \text{Gallons of Product} = \frac{64.8\text{ lbs a.i.}}{2.0\text{ lbs a.i./gal}} = 32.4\text{ gallons of herbicide product} Gallons of Product = 2.0 lbs a.i./gal 64.8 lbs a.i. = 32.4 gallons of herbicide product
Application verification: The applicator must introduce exactly 32.4 gallons 32.4\text{ gallons} 32.4 gallons of the liquid herbicide formulation into the pond via subsurface trailing hoses or surface injection to achieve the mandated 2.0 ppm 2.0\text{ ppm} 2.0 ppm concentration.