Study guide

1.4 Policy Structure: Declarations, Insuring Agreement, Conditions, Exclusions

Connecticut Property & Casualty Insurance State

Track your progress as you read

Finished sections get a check mark.

1 Standalone Coverage Map

Standalone Coverage Map

2 Introduction: Connecticut Property & Casualty Insurance Exam

Connecticut Property & Casualty Exam Overview

3 National Portion: Insurance Fundamentals

1.1 Risk, Hazards, Perils, and the Law of Large Numbers 1.2 Insurable Interest, Indemnity, and Other Insurance Principles 1.3 Insurance Contract Law and Elements 1.4 Policy Structure: Declarations, Insuring Agreement, Conditions, Exclusions 1.5 Parties, Agents vs. Brokers, and Authority

4 National Portion: Property Insurance Concepts

2.1 Causes of Loss / Named-Peril vs. Open-Peril 2.2 Valuation: ACV, Replacement Cost, and Functional Value 2.3 Coinsurance and the Coinsurance Formula 2.4 Deductibles, Limits, and Loss Settlement 2.5 Common Property Policy Conditions and Clauses

5 National Portion: Dwelling Policies (DP)

3.1 Dwelling Policy Forms DP-1, DP-2, DP-3 3.2 Dwelling Coverages A-E and Other Coverages 3.3 Dwelling Perils, Conditions, and Endorsements 3.4 Mobile Home and Specialized Dwelling Coverage

6 National Portion: Homeowners Policies - Forms & Section I

4.1 Homeowners Forms HO-2 through HO-8 and Eligibility 4.2 Section I Coverages A-D and Additional Coverages 4.3 Section I Perils Insured Against and Exclusions 4.4 Replacement Cost vs. ACV and Loss Settlement in Homeowners

7 National Portion: Homeowners Policies - Section II & Endorsements

5.1 Section II Coverages E (Liability) and F (Medical Payments) 5.2 Homeowners Conditions and Duties After Loss 5.3 Common Homeowners Endorsements (scheduled property, water backup, ordinance or law)

8 National Portion: Personal Auto Policy - Liability & Injury

6.1 Personal Auto Policy Structure and Eligibility 6.2 Part A Liability and Supplementary Payments 6.3 Part B Medical Payments 6.4 Part C Uninsured/Underinsured Motorists

9 National Portion: Personal Auto Policy - Physical Damage & Duties

7.1 Part D Coverage for Damage to Your Auto (collision, other-than-collision) 7.2 Exclusions and Part E Duties After an Accident 7.3 Part F General Provisions, Endorsements, and No-Fault Concepts

10 National Portion: Liability Insurance Concepts

8.1 Negligence, Torts, and Legal Liability 8.2 Defenses, Damages, and Vicarious Liability 8.3 Occurrence vs. Claims-Made Triggers 8.4 Bodily Injury, Property Damage, and Personal/Advertising Injury

11 National Portion: Commercial Property Insurance

9.1 Commercial Package Policy Structure and Common Policy Conditions 9.2 Building and Personal Property Coverage Form (BPP) 9.3 Causes of Loss Forms (Basic, Broad, Special) 9.4 Business Income and Extra Expense 9.5 Commercial Property Endorsements and the BOP

12 National Portion: Commercial General Liability - Coverages

10.1 CGL Coverage A: Bodily Injury and Property Damage Liability 10.2 CGL Coverage B: Personal and Advertising Injury, Coverage C: Medical Payments 10.3 Who Is an Insured and Supplementary Payments

13 National Portion: Commercial General Liability - Limits, Triggers & Exclusions

11.1 CGL Limits of Insurance and Aggregates 11.2 Occurrence vs. Claims-Made CGL and Retroactive Dates 11.3 Key CGL Exclusions and Endorsements

14 National Portion: Commercial Auto Insurance

12.1 Business Auto Coverage Form and Covered Auto Symbols 12.2 Commercial Auto Liability and Physical Damage 12.3 Motor Carrier / Trucking and MCS-90 12.4 Garage Coverage Form and Garagekeepers 12.5 Commercial Auto Endorsements

15 National Portion: Workers Compensation

13.1 Workers Compensation Statutory Background and Benefits 13.2 Part One (Workers Comp) and Part Two (Employers Liability) 13.3 Premium Basis, Experience Modification, and Classification 13.4 Other States, USL&H, and Federal Acts 13.5 Workers Comp Exclusions and Endorsements

16 National Portion: Other Commercial Lines - BOP, Crime & Marine

14.1 Businessowners Policy (BOP) in Depth 14.2 Crime and Fidelity Coverage 14.3 Inland Marine and Nationwide Marine Definition 14.4 Ocean Marine Coverages (hull, cargo, freight, P&I)

17 National Portion: Other Commercial Lines - Specialty & Professional

15.1 Farm and Agricultural Coverage 15.2 Commercial Umbrella and Excess Liability 15.3 Professional Liability and Errors & Omissions 15.4 Directors & Officers and Employment Practices Liability

18 National Portion: Other Commercial Lines - Surety, Flood & Specialty

16.1 Surety and Fidelity Bonds 16.2 National Flood Insurance Program (NFIP) 16.3 Cyber, Aviation, and Other Specialty Lines

19 National Portion: Insurance Regulation & Market Conduct

17.1 State Regulation, Licensing, and the McCarran-Ferguson Act 17.2 Rates, Forms, Solvency, and Guaranty Associations 17.3 Producer Authority, Fiduciary Duty, and Company Operations

20 National Portion: Ethics & Unfair Trade Practices

18.1 Unfair Trade Practices and Unfair Claims Settlement 18.2 Producer Ethics, Errors & Omissions Exposure, and Fiduciary Conduct 18.3 Privacy, Fraud, and Consumer Protection

21 Chapter 1: Connecticut P&C Regulation & Licensing

1.1 Connecticut Insurance Department 1.2 Connecticut Producer Licensing Requirements

22 Chapter 2: Connecticut Property Insurance

2.1 Connecticut Homeowners Insurance 2.2 Connecticut FAIR Plan 2.3 Connecticut Commercial Property Insurance

23 Chapter 3: Connecticut Casualty & Auto Insurance

3.1 Connecticut Auto Insurance Requirements 3.2 Connecticut Workers' Compensation 3.3 Connecticut General Liability Insurance

24 Chapter 4: Connecticut Ethics & Professional Conduct

4.1 Ethical Principles and Fiduciary Duties 4.2 Prohibited Practices Under Connecticut Law 4.3 Consumer Protection in Connecticut

1.4 Policy Structure: Declarations, Insuring Agreement, Conditions, Exclusions

Key Takeaways Explain This Topic AI

A standard policy is built from Declarations, Definitions, Insuring Agreement, Exclusions, Conditions, and Endorsements; most ISO forms follow this order

The Declarations (Dec) page personalizes the form with named insured, covered property, limits, deductibles, premium, and the policy period

The Insuring Agreement is the insurer's core promise; named-perils coverage protects only listed perils while open-perils (special) covers all causes except those excluded

Exclusions remove coverage; common P&C exclusions include flood, earthquake, war, intentional acts, wear and tear, and ordinance or law

  • Endorsements (riders) add, delete, or modify coverage and override conflicting language in the base form
  • Last updated: June 2026

The Six Standard Components

Most property-casualty policies, including those filed by the Insurance Services Office (ISO) , are assembled from the same building blocks. Reading them in order answers nearly every coverage question.

Declarations (Dec page). The personalized front page: named insured and address, description of covered property or operations, policy period, coverage limits, deductibles, premium, and any applicable forms and endorsements.

Definitions. Spells out key words (often you, we, insured, bodily injury, occurrence ). Defined terms are usually bold or quoted.

Insuring Agreement. The insurer's central promise to pay for covered losses in exchange for premium.

Exclusions. Losses, perils, property, or persons removed from coverage.

Conditions. The rules both parties must follow for the contract to operate.

Endorsements (Riders). Attached forms that add, delete, or change coverage.

Exam trap: When two parts conflict, the endorsement controls over the base form , and more specific wording controls over general wording.

Insuring Agreement: Named Perils vs. Open Perils

The insuring agreement defines the scope of coverage in one of two ways, and this shifts the burden of proof .

Approach What is covered Who proves what

Named perils Only the perils specifically listed (fire, lightning, windstorm, theft) The insured must prove the loss came from a listed peril

Open perils (Special / All-Risk) All direct physical loss except causes that are excluded The insurer must prove an exclusion applies

Open-perils coverage is broader and usually costs more. For example, an HO-3 homeowners form provides open-perils coverage on the dwelling (Coverage A) but named-perils coverage on personal property (Coverage C).

Conditions

Conditions are the working rules of the contract. Common P&C conditions include:

Duties after loss (prompt notice, protect property from further damage, submit a proof of loss, cooperate, and submit to examination under oath).

Cancellation and nonrenewal rules and required notice periods.

Appraisal , used when the insurer and insured disagree on the loss amount.

Subrogation (transfer of recovery rights) and the loss settlement basis (ACV or replacement cost).

Assignment , which generally requires the insurer's written consent.

Concealment, misrepresentation, or fraud , which can void the policy.

Liberalization , which automatically extends any broadening of the form (made without extra premium during the term) to existing insureds.

Exclusions and Endorsements

Exclusions narrow the broad grant of coverage to keep the policy insurable and affordable. They exist to remove uninsurable or catastrophic perils, eliminate coverage better handled elsewhere, and prevent duplication. Frequently tested P&C exclusions:

Flood and earth movement (earthquake) — usually require separate policies or endorsements.

War , nuclear hazard , and intentional acts by the insured.

Wear and tear, deterioration, and inherent vice — maintenance, not sudden loss.

Ordinance or law — the added cost of rebuilding to current codes, unless added back by endorsement.

Endorsements (also called riders in life and health) modify the base policy. They can add a peril (earthquake), increase a limit (scheduled jewelry), or restrict coverage. Because an endorsement is more specific and more recent, it overrides any conflicting language in the base form.

Coverage Decision Walkthrough

Ask in order: (1) Is the property/person an insured covered item on the Dec page? (2) Does the insuring agreement grant coverage for this cause of loss? (3) Does any exclusion remove it? (4) Does an endorsement add it back or change a limit? (5) Are the conditions satisfied? If yes through step 5, the loss is covered up to the applicable limit minus the deductible.

Limits, Sublimits, and Deductibles on the Dec Page

The declarations also fix how much the insurer will pay. A per-occurrence limit caps a single loss; an aggregate limit caps all losses in the policy period. A sublimit is a lower cap on a specific category (for example, $1,500 on jewelry theft inside a broader contents limit). A split limit auto liability of 100/300/50 means $100,000 bodily injury per person, $300,000 per accident, and $50,000 property damage, while a combined single limit (CSL) of $300,000 covers any mix of injury and damage up to that one figure.

Worked Limit Example

A liability claim involves three injured people with damages of $80,000, $120,000, and $40,000 under a 100/300/50 split-limit policy. The first claimant is capped at the $100,000 per-person limit (the insurer pays $80,000), the second is also under the $100,000 per-person cap so the full $120,000 is not paid (only $100,000), and the third receives $40,000. The total $220,000 stays under the $300,000 per-accident cap, so the insurer pays $80,000 + $100,000 + $40,000 = $220,000 .

Definitions Control Meaning

Never skip the definitions section. A policy's outcome can turn on how it defines occurrence , insured , bodily injury , or property damage . A claim that looks covered under the insuring agreement may fall outside it because the defined term is narrower than everyday usage.

How the Parts Interact at Claim Time

Reading a policy is a disciplined sequence the exam rewards. Start with the declarations to confirm the insured, property, limits, deductibles, and forms. Move to the insuring agreement to see what the policy promises to cover. Apply the definitions , because capitalized or quoted terms (occurrence, insured, residence premises) have precise meanings that control coverage. Then run the loss through the exclusions to see what is taken away, watching for exceptions that give coverage back.

Finally check the conditions (notice, proof of loss, cooperation, other-insurance) and any endorsements , which are the most specific terms and override conflicting language. A loss is covered only if it passes through all five gates: declared, insured-against, within definitions, not excluded, and conditions satisfied.

Endorsements and the Rule of Specificity

Because endorsements are added to address a particular need, they control over conflicting boilerplate in the base form. An endorsement can broaden coverage (water back-up, ordinance or law), restrict it (a windstorm exclusion in a coastal zone), or simply clarify it. When a fact pattern includes an endorsement, the candidate should read it before concluding coverage, since it may reverse what the base form alone would suggest. This hierarchy - declarations and endorsements being the most insured-specific, the base form most general - mirrors how courts construe insurance contracts.

Quick Answer: Coverage is granted in the insuring agreement, taken away by exclusions, restored or modified by endorsements, and governed by conditions, all personalized on the declarations page.