Study guide
2.3 Coinsurance and the Coinsurance Formula
Connecticut Property & Casualty Insurance State
Track your progress as you read
Finished sections get a check mark.
1 Standalone Coverage Map
Standalone Coverage Map
2 Introduction: Connecticut Property & Casualty Insurance Exam
Connecticut Property & Casualty Exam Overview
3 National Portion: Insurance Fundamentals
1.1 Risk, Hazards, Perils, and the Law of Large Numbers 1.2 Insurable Interest, Indemnity, and Other Insurance Principles 1.3 Insurance Contract Law and Elements 1.4 Policy Structure: Declarations, Insuring Agreement, Conditions, Exclusions 1.5 Parties, Agents vs. Brokers, and Authority
4 National Portion: Property Insurance Concepts
2.1 Causes of Loss / Named-Peril vs. Open-Peril 2.2 Valuation: ACV, Replacement Cost, and Functional Value 2.3 Coinsurance and the Coinsurance Formula 2.4 Deductibles, Limits, and Loss Settlement 2.5 Common Property Policy Conditions and Clauses
5 National Portion: Dwelling Policies (DP)
3.1 Dwelling Policy Forms DP-1, DP-2, DP-3 3.2 Dwelling Coverages A-E and Other Coverages 3.3 Dwelling Perils, Conditions, and Endorsements 3.4 Mobile Home and Specialized Dwelling Coverage
6 National Portion: Homeowners Policies - Forms & Section I
4.1 Homeowners Forms HO-2 through HO-8 and Eligibility 4.2 Section I Coverages A-D and Additional Coverages 4.3 Section I Perils Insured Against and Exclusions 4.4 Replacement Cost vs. ACV and Loss Settlement in Homeowners
7 National Portion: Homeowners Policies - Section II & Endorsements
5.1 Section II Coverages E (Liability) and F (Medical Payments) 5.2 Homeowners Conditions and Duties After Loss 5.3 Common Homeowners Endorsements (scheduled property, water backup, ordinance or law)
8 National Portion: Personal Auto Policy - Liability & Injury
6.1 Personal Auto Policy Structure and Eligibility 6.2 Part A Liability and Supplementary Payments 6.3 Part B Medical Payments 6.4 Part C Uninsured/Underinsured Motorists
9 National Portion: Personal Auto Policy - Physical Damage & Duties
7.1 Part D Coverage for Damage to Your Auto (collision, other-than-collision) 7.2 Exclusions and Part E Duties After an Accident 7.3 Part F General Provisions, Endorsements, and No-Fault Concepts
10 National Portion: Liability Insurance Concepts
8.1 Negligence, Torts, and Legal Liability 8.2 Defenses, Damages, and Vicarious Liability 8.3 Occurrence vs. Claims-Made Triggers 8.4 Bodily Injury, Property Damage, and Personal/Advertising Injury
11 National Portion: Commercial Property Insurance
9.1 Commercial Package Policy Structure and Common Policy Conditions 9.2 Building and Personal Property Coverage Form (BPP) 9.3 Causes of Loss Forms (Basic, Broad, Special) 9.4 Business Income and Extra Expense 9.5 Commercial Property Endorsements and the BOP
12 National Portion: Commercial General Liability - Coverages
10.1 CGL Coverage A: Bodily Injury and Property Damage Liability 10.2 CGL Coverage B: Personal and Advertising Injury, Coverage C: Medical Payments 10.3 Who Is an Insured and Supplementary Payments
13 National Portion: Commercial General Liability - Limits, Triggers & Exclusions
11.1 CGL Limits of Insurance and Aggregates 11.2 Occurrence vs. Claims-Made CGL and Retroactive Dates 11.3 Key CGL Exclusions and Endorsements
14 National Portion: Commercial Auto Insurance
12.1 Business Auto Coverage Form and Covered Auto Symbols 12.2 Commercial Auto Liability and Physical Damage 12.3 Motor Carrier / Trucking and MCS-90 12.4 Garage Coverage Form and Garagekeepers 12.5 Commercial Auto Endorsements
15 National Portion: Workers Compensation
13.1 Workers Compensation Statutory Background and Benefits 13.2 Part One (Workers Comp) and Part Two (Employers Liability) 13.3 Premium Basis, Experience Modification, and Classification 13.4 Other States, USL&H, and Federal Acts 13.5 Workers Comp Exclusions and Endorsements
16 National Portion: Other Commercial Lines - BOP, Crime & Marine
14.1 Businessowners Policy (BOP) in Depth 14.2 Crime and Fidelity Coverage 14.3 Inland Marine and Nationwide Marine Definition 14.4 Ocean Marine Coverages (hull, cargo, freight, P&I)
17 National Portion: Other Commercial Lines - Specialty & Professional
15.1 Farm and Agricultural Coverage 15.2 Commercial Umbrella and Excess Liability 15.3 Professional Liability and Errors & Omissions 15.4 Directors & Officers and Employment Practices Liability
18 National Portion: Other Commercial Lines - Surety, Flood & Specialty
16.1 Surety and Fidelity Bonds 16.2 National Flood Insurance Program (NFIP) 16.3 Cyber, Aviation, and Other Specialty Lines
19 National Portion: Insurance Regulation & Market Conduct
17.1 State Regulation, Licensing, and the McCarran-Ferguson Act 17.2 Rates, Forms, Solvency, and Guaranty Associations 17.3 Producer Authority, Fiduciary Duty, and Company Operations
20 National Portion: Ethics & Unfair Trade Practices
18.1 Unfair Trade Practices and Unfair Claims Settlement 18.2 Producer Ethics, Errors & Omissions Exposure, and Fiduciary Conduct 18.3 Privacy, Fraud, and Consumer Protection
21 Chapter 1: Connecticut P&C Regulation & Licensing
1.1 Connecticut Insurance Department 1.2 Connecticut Producer Licensing Requirements
22 Chapter 2: Connecticut Property Insurance
2.1 Connecticut Homeowners Insurance 2.2 Connecticut FAIR Plan 2.3 Connecticut Commercial Property Insurance
23 Chapter 3: Connecticut Casualty & Auto Insurance
3.1 Connecticut Auto Insurance Requirements 3.2 Connecticut Workers' Compensation 3.3 Connecticut General Liability Insurance
24 Chapter 4: Connecticut Ethics & Professional Conduct
4.1 Ethical Principles and Fiduciary Duties 4.2 Prohibited Practices Under Connecticut Law 4.3 Consumer Protection in Connecticut
2.3 Coinsurance and the Coinsurance Formula
Key Takeaways Explain This Topic AI
Coinsurance requires the insured to carry a minimum percentage (usually 80%, 90%, or 100%) of the property's value.
The coinsurance formula is (Did Carry / Should Carry) x Loss = Recovery, capped at the policy limit and after the deductible.
Underinsuring triggers a coinsurance penalty, making the insured a co-insurer of the shortfall.
Agreed value endorsements suspend the coinsurance clause for the policy period.
Coinsurance always uses property value at the time of loss, not the value when the policy was written.
Last updated: June 2026
Why Coinsurance Exists
Most property losses are partial , not total. If insurers charged the same rate regardless of limit, owners could buy a small limit, pay a small premium, and still collect fully on common partial losses. Coinsurance corrects this by requiring the insured to carry a limit equal to a stated percentage of the property's value — typically 80%, 90%, or 100% .
Meet the requirement and partial losses are paid in full (up to the limit, after the deductible). Fall short and the insured becomes a co-insurer , sharing the loss in proportion to the underinsurance.
The Coinsurance Formula
The tested formula is:
(Did Carry ÷ Should Carry) × Loss = Recovery
Did Carry = the limit of insurance actually purchased.
Should Carry = property value at the time of loss × coinsurance %.
The result is then capped at the policy limit and reduced by the deductible .
A frequent error is using the value when the policy was issued. Always use the value at the time of loss , because property appreciates and replacement costs rise over the policy year.
Worked Example
A building is worth $500,000 at the time of loss with an 80% coinsurance clause, so the insured should carry $400,000. Suppose the insured actually carries only $300,000 and suffers a $100,000 loss with a $1,000 deductible.
Did ÷ Should = $300,000 ÷ $400,000 = 0.75 .
0.75 × $100,000 loss = $75,000 .
Subtract the $1,000 deductible = $74,000 paid.
The insured absorbs $26,000 — the $25,000 coinsurance penalty plus the deductible — because the building was underinsured.
Effect of Coverage Level on a $100,000 Loss ($500K Building, 80% Coinsurance)
- Limit Carried Did ÷ Should Recovery (before deductible)
- $400,000 (100% of required) 1.00 $100,000 (no penalty)
- $360,000 (90% of required) 0.90 $90,000
- $320,000 (80% of required) 0.80 $80,000
- $240,000 (60% of required) 0.60 $60,000
Suspending Coinsurance
The ISO Agreed Value option (CP 12 30) suspends the coinsurance clause for the policy period. The insured submits a signed Statement of Values , and as long as the limit equals the agreed value, partial losses are paid in full with no penalty.
Key exam reminders:
Coinsurance can never make the insurer pay more than the policy limit or more than the actual loss.
On a total loss , coinsurance does not reduce payment below the limit — the limit is simply paid.
Higher coinsurance percentages earn a lower rate because the insurer collects adequate premium on the full value.
Coinsurance on Contents and in Other Lines
Coinsurance is not limited to buildings. The ISO Building and Personal Property Coverage Form (CP 00 10) can apply a coinsurance percentage to business personal property , valued at the time of loss. The same Did-÷-Should math applies, using the contents value rather than the building value.
Coinsurance-type concepts also appear in health and inland marine lines, but the property version is the one tested numerically. A subtle distinction: a deductible is subtracted after the coinsurance factor is applied, never before. Reversing that order is a classic wrong answer because it understates the penalty the insured actually bears.
Avoiding the Penalty — Insurance to Value
The practical lesson of coinsurance is insurance to value (ITV) : carry a limit at or above the required percentage of full value. Producers help clients with replacement-cost estimators, and carriers add inflation guard so the limit tracks rising costs through the year.
A building written at exactly the required percentage receives no penalty on partial losses, which is why most homeowners forms build in an 80% replacement-cost trigger . If the insured drops below 80% of replacement value, the dwelling settlement converts from replacement cost to the larger of ACV or the proportionate amount — a direct application of the coinsurance idea inside a personal-lines policy.
The Coinsurance Formula Step-by-Step
The penalty formula is (Did / Should) x Loss , where Did is the limit actually carried, Should is the required limit (coinsurance percentage times full value at the time of loss), and the result is then reduced by the deductible and capped at the policy limit. The ratio is never allowed to exceed 1.0, so carrying more than the required amount earns no bonus but avoids any penalty.
- Element Example value
- Building value at loss $500,000
- Coinsurance % 90%
- Required limit (Should) $450,000
- Carried limit (Did) $360,000
- Coinsurance ratio 360,000 / 450,000 = 0.80
- Loss $100,000
- Payment before deductible 0.80 x $100,000 = $80,000
The insured recovers $80,000 (minus the deductible) and absorbs the $20,000 shortfall as the coinsurance penalty. Two common traps: (1) the required limit is measured at the time of loss , so inflation can push a once-adequate limit below the threshold; and (2) total losses are typically paid at the policy limit without applying the ratio, so the penalty mainly bites partial losses. This is why insurance-to-value monitoring and inflation guard are the producer's primary defenses against an unexpected penalty.
When Coinsurance Does and Does Not Apply
Coinsurance is a commercial property and dwelling concept; it does not apply to liability coverage or to most personal property scheduled on a floater. On personal homeowners forms it operates indirectly through the 80% replacement-cost trigger : meet 80% of replacement value and the dwelling settles at full replacement cost on partial losses; fall below and settlement drops to the larger of ACV or the proportionate amount. The Agreed Value option (common on commercial property) suspends coinsurance entirely in exchange for the insured carrying a value the insurer accepts in advance, removing the penalty risk.
Recognizing which coverages carry a coinsurance clause - and that Agreed Value turns it off - prevents the common error of applying the penalty formula where it does not belong.
Comparing Penalty Outcomes
- Insured-to-value Result on partial loss
- At or above required % Full payment (ratio capped at 1.0), no penalty
- Below required % Payment reduced by carried/required ratio
- Agreed Value in force Coinsurance suspended; pay to limit
The table captures the practical takeaway: the penalty exists only when the insured carries less than the required percentage and only on partial losses. Producers who keep limits current through reappraisal and inflation guard, or who use Agreed Value where available, protect clients from a penalty that can turn an adequate-seeming policy into a painful out-of-pocket shortfall at claim time.