Study guide
17.2 Rates, Forms, Solvency, and Guaranty Associations
Connecticut Property & Casualty Insurance State
Track your progress as you read
Finished sections get a check mark.
1 Standalone Coverage Map
Standalone Coverage Map
2 Introduction: Connecticut Property & Casualty Insurance Exam
Connecticut Property & Casualty Exam Overview
3 National Portion: Insurance Fundamentals
1.1 Risk, Hazards, Perils, and the Law of Large Numbers 1.2 Insurable Interest, Indemnity, and Other Insurance Principles 1.3 Insurance Contract Law and Elements 1.4 Policy Structure: Declarations, Insuring Agreement, Conditions, Exclusions 1.5 Parties, Agents vs. Brokers, and Authority
4 National Portion: Property Insurance Concepts
2.1 Causes of Loss / Named-Peril vs. Open-Peril 2.2 Valuation: ACV, Replacement Cost, and Functional Value 2.3 Coinsurance and the Coinsurance Formula 2.4 Deductibles, Limits, and Loss Settlement 2.5 Common Property Policy Conditions and Clauses
5 National Portion: Dwelling Policies (DP)
3.1 Dwelling Policy Forms DP-1, DP-2, DP-3 3.2 Dwelling Coverages A-E and Other Coverages 3.3 Dwelling Perils, Conditions, and Endorsements 3.4 Mobile Home and Specialized Dwelling Coverage
6 National Portion: Homeowners Policies - Forms & Section I
4.1 Homeowners Forms HO-2 through HO-8 and Eligibility 4.2 Section I Coverages A-D and Additional Coverages 4.3 Section I Perils Insured Against and Exclusions 4.4 Replacement Cost vs. ACV and Loss Settlement in Homeowners
7 National Portion: Homeowners Policies - Section II & Endorsements
5.1 Section II Coverages E (Liability) and F (Medical Payments) 5.2 Homeowners Conditions and Duties After Loss 5.3 Common Homeowners Endorsements (scheduled property, water backup, ordinance or law)
8 National Portion: Personal Auto Policy - Liability & Injury
6.1 Personal Auto Policy Structure and Eligibility 6.2 Part A Liability and Supplementary Payments 6.3 Part B Medical Payments 6.4 Part C Uninsured/Underinsured Motorists
9 National Portion: Personal Auto Policy - Physical Damage & Duties
7.1 Part D Coverage for Damage to Your Auto (collision, other-than-collision) 7.2 Exclusions and Part E Duties After an Accident 7.3 Part F General Provisions, Endorsements, and No-Fault Concepts
10 National Portion: Liability Insurance Concepts
8.1 Negligence, Torts, and Legal Liability 8.2 Defenses, Damages, and Vicarious Liability 8.3 Occurrence vs. Claims-Made Triggers 8.4 Bodily Injury, Property Damage, and Personal/Advertising Injury
11 National Portion: Commercial Property Insurance
9.1 Commercial Package Policy Structure and Common Policy Conditions 9.2 Building and Personal Property Coverage Form (BPP) 9.3 Causes of Loss Forms (Basic, Broad, Special) 9.4 Business Income and Extra Expense 9.5 Commercial Property Endorsements and the BOP
12 National Portion: Commercial General Liability - Coverages
10.1 CGL Coverage A: Bodily Injury and Property Damage Liability 10.2 CGL Coverage B: Personal and Advertising Injury, Coverage C: Medical Payments 10.3 Who Is an Insured and Supplementary Payments
13 National Portion: Commercial General Liability - Limits, Triggers & Exclusions
11.1 CGL Limits of Insurance and Aggregates 11.2 Occurrence vs. Claims-Made CGL and Retroactive Dates 11.3 Key CGL Exclusions and Endorsements
14 National Portion: Commercial Auto Insurance
12.1 Business Auto Coverage Form and Covered Auto Symbols 12.2 Commercial Auto Liability and Physical Damage 12.3 Motor Carrier / Trucking and MCS-90 12.4 Garage Coverage Form and Garagekeepers 12.5 Commercial Auto Endorsements
15 National Portion: Workers Compensation
13.1 Workers Compensation Statutory Background and Benefits 13.2 Part One (Workers Comp) and Part Two (Employers Liability) 13.3 Premium Basis, Experience Modification, and Classification 13.4 Other States, USL&H, and Federal Acts 13.5 Workers Comp Exclusions and Endorsements
16 National Portion: Other Commercial Lines - BOP, Crime & Marine
14.1 Businessowners Policy (BOP) in Depth 14.2 Crime and Fidelity Coverage 14.3 Inland Marine and Nationwide Marine Definition 14.4 Ocean Marine Coverages (hull, cargo, freight, P&I)
17 National Portion: Other Commercial Lines - Specialty & Professional
15.1 Farm and Agricultural Coverage 15.2 Commercial Umbrella and Excess Liability 15.3 Professional Liability and Errors & Omissions 15.4 Directors & Officers and Employment Practices Liability
18 National Portion: Other Commercial Lines - Surety, Flood & Specialty
16.1 Surety and Fidelity Bonds 16.2 National Flood Insurance Program (NFIP) 16.3 Cyber, Aviation, and Other Specialty Lines
19 National Portion: Insurance Regulation & Market Conduct
17.1 State Regulation, Licensing, and the McCarran-Ferguson Act 17.2 Rates, Forms, Solvency, and Guaranty Associations 17.3 Producer Authority, Fiduciary Duty, and Company Operations
20 National Portion: Ethics & Unfair Trade Practices
18.1 Unfair Trade Practices and Unfair Claims Settlement 18.2 Producer Ethics, Errors & Omissions Exposure, and Fiduciary Conduct 18.3 Privacy, Fraud, and Consumer Protection
21 Chapter 1: Connecticut P&C Regulation & Licensing
1.1 Connecticut Insurance Department 1.2 Connecticut Producer Licensing Requirements
22 Chapter 2: Connecticut Property Insurance
2.1 Connecticut Homeowners Insurance 2.2 Connecticut FAIR Plan 2.3 Connecticut Commercial Property Insurance
23 Chapter 3: Connecticut Casualty & Auto Insurance
3.1 Connecticut Auto Insurance Requirements 3.2 Connecticut Workers' Compensation 3.3 Connecticut General Liability Insurance
24 Chapter 4: Connecticut Ethics & Professional Conduct
4.1 Ethical Principles and Fiduciary Duties 4.2 Prohibited Practices Under Connecticut Law 4.3 Consumer Protection in Connecticut
17.2 Rates, Forms, Solvency, and Guaranty Associations
Key Takeaways Explain This Topic AI
Rates must not be inadequate, excessive, or unfairly discriminatory; this is the regulatory three-part standard.
Rate-filing systems include prior approval, file-and-use, use-and-file, flex rating, and open competition (no file).
Solvency is monitored through statutory reserves, the NAIC's risk-based capital (RBC) formula, and IRIS ratios.
Guaranty associations pay covered claims of insolvent admitted insurers, subject to per-claim caps, and are funded by assessments on solvent insurers.
ISO and AAIS develop standardized policy forms and loss-cost data that most insurers file with the state.
Last updated: June 2026
The Rate Standard
Every state applies the same three-part test to property and casualty rates. A rate may not be:
Inadequate — too low to cover losses and expenses, threatening solvency.
Excessive — unreasonably high relative to the expected losses.
Unfairly discriminatory — charging different premiums to risks of the same actuarial class.
Note that fair discrimination is allowed and expected: a 19-year-old driver and a teen with violations can pay more than a 45-year-old with a clean record because they present a different expected loss . The exam trap is treating all rate differences as illegal; only differences not justified by risk are unfair.
Rate-Filing Systems
States use different mechanisms to review the rates and forms insurers intend to use:
- System How it works
- Prior approval File and wait for the DOI to approve before use
- File-and-use File, then use immediately (DOI may later disapprove)
- Use-and-file Use first, file shortly afterward
- Flex (modified prior approval) Small changes within a band are exempt; larger ones need approval
- Open competition / no-file Market sets rates; no filing required
Many states adopt loss costs and advisory prospective loss data published by ISO (Insurance Services Office) or AAIS (American Association of Insurance Services) , to which the insurer adds its own expense and profit factor.
Solvency Monitoring
Protecting policyholders means keeping insurers solvent. Regulators rely on three main tools:
Statutory reserves — liabilities for unpaid losses and unearned premium, valued conservatively under Statutory Accounting Principles (SAP) , which are stricter than GAAP.
Risk-Based Capital (RBC) — an NAIC formula setting the minimum capital an insurer must hold given its risk profile. Falling below RBC thresholds triggers regulatory action levels up to mandatory control.
IRIS ratios — financial ratios that flag insurers for closer review when results fall outside the usual range.
When an insurer fails, the commissioner may seek rehabilitation (fix it) or liquidation (wind it down) through a court order.
Form Filing and Required Provisions
Alongside rates, insurers must file policy forms for approval. Regulators check that a form contains state-mandated provisions, uses plain and non-deceptive language, and does not narrow coverage below statutory minimums. A form disapproved by the DOI may not be used.
Property and casualty forms are largely standardized through ISO and AAIS , identified by name and edition date (for example, an HO-3 special form or a CGL occurrence form). The edition date matters because policy language and court interpretations change over time, and the version in force at the loss date controls.
Exam points on rating data:
Loss costs reflect only expected losses and loss-adjustment expense; the insurer adds a loss-cost multiplier for its own expenses and profit.
Credibility weights an insurer's own loss experience against industry data.
Schedule rating debits or credits a commercial premium for specific risk characteristics such as housekeeping or management quality.
Guaranty Associations and a Worked Cap
Every state has a property and casualty guaranty association that pays the covered claims of an insolvent admitted insurer . Solvent insurers fund it through post-insolvency assessments , and they may partially recoup those assessments through premium-tax offsets or rate surcharges.
Key limits: surplus lines and non-admitted carriers are not covered, and most states cap a covered claim (commonly $300,000 to $500,000 ) and require return of unearned premium up to a smaller cap (often $10,000 ).
Worked example: An admitted insurer is liquidated owing a policyholder a $420,000 liability claim in a state with a $300,000 guaranty cap. The association pays $300,000 ; the remaining $120,000 becomes a general claim against the insolvent estate, paid only if assets remain.
Standardized Forms and Coinsurance
Most P&C policies use standardized forms developed by ISO or AAIS , such as the Homeowners (HO) series, the Personal Auto Policy (PAP) , the Commercial Property Causes of Loss forms, and the Commercial General Liability (CGL) coverage form. Insurers file these forms with the DOI, which checks them for legality, clarity, and required provisions before approval.
Many commercial property forms carry a coinsurance clause that ties a partial-loss payment to the percentage of value the insured carries. The formula is: (Did carry / Should carry) x Loss = Payment , capped at the limit and reduced by the deductible.
Worked example: A building worth $500,000 carries an 80% coinsurance clause, so the insured should carry $400,000. The insured actually carries only $300,000 and has a $100,000 loss. Payment = ($300,000 / $400,000) x $100,000 = $75,000 , before any deductible. The $25,000 shortfall is the coinsurance penalty for being underinsured.
Rate Regulation Systems
States regulate rates under several filing systems the exam contrasts. Prior approval requires the insurer to file and obtain the commissioner's approval before using a rate. File-and-use lets the insurer use the rate immediately after filing, subject to later disapproval. Use-and-file permits use first with the filing made shortly after. Flex rating allows rate changes within a band without prior approval but requires approval outside it.
The governing standard everywhere is that rates must be adequate (enough to pay claims and stay solvent), not excessive , and not unfairly discriminatory - the three-part rate standard that anchors most rate-regulation questions.
Guaranty Associations and Solvency Monitoring
The state guaranty association is the safety net that pays the covered claims of an insolvent licensed insurer, funded by assessments on the remaining solvent insurers in that state - never by taxpayers and never by a surplus-lines or non-admitted insurer's policyholders, who are generally not protected. Coverage is subject to statutory per-claim and per-policy caps. Solvency is monitored through financial examinations , risk-based capital (RBC) requirements, and the NAIC's accreditation and IRIS ratio systems.
A frequent exam point: because guaranty-fund protection does not extend to surplus-lines placements, producers must use only eligible surplus-lines insurers and disclose the lack of guaranty-fund coverage to the client.
Exam Tip : Rates must be adequate, not excessive, and not unfairly discriminatory; prior-approval is the strictest filing system; and the guaranty association covers admitted-insurer insolvencies via assessments on solvent insurers, not surplus-lines policies.