Study guide
13.3 Premium Basis, Experience Modification, and Classification
Connecticut Property & Casualty Insurance State
Track your progress as you read
Finished sections get a check mark.
1 Standalone Coverage Map
Standalone Coverage Map
2 Introduction: Connecticut Property & Casualty Insurance Exam
Connecticut Property & Casualty Exam Overview
3 National Portion: Insurance Fundamentals
1.1 Risk, Hazards, Perils, and the Law of Large Numbers 1.2 Insurable Interest, Indemnity, and Other Insurance Principles 1.3 Insurance Contract Law and Elements 1.4 Policy Structure: Declarations, Insuring Agreement, Conditions, Exclusions 1.5 Parties, Agents vs. Brokers, and Authority
4 National Portion: Property Insurance Concepts
2.1 Causes of Loss / Named-Peril vs. Open-Peril 2.2 Valuation: ACV, Replacement Cost, and Functional Value 2.3 Coinsurance and the Coinsurance Formula 2.4 Deductibles, Limits, and Loss Settlement 2.5 Common Property Policy Conditions and Clauses
5 National Portion: Dwelling Policies (DP)
3.1 Dwelling Policy Forms DP-1, DP-2, DP-3 3.2 Dwelling Coverages A-E and Other Coverages 3.3 Dwelling Perils, Conditions, and Endorsements 3.4 Mobile Home and Specialized Dwelling Coverage
6 National Portion: Homeowners Policies - Forms & Section I
4.1 Homeowners Forms HO-2 through HO-8 and Eligibility 4.2 Section I Coverages A-D and Additional Coverages 4.3 Section I Perils Insured Against and Exclusions 4.4 Replacement Cost vs. ACV and Loss Settlement in Homeowners
7 National Portion: Homeowners Policies - Section II & Endorsements
5.1 Section II Coverages E (Liability) and F (Medical Payments) 5.2 Homeowners Conditions and Duties After Loss 5.3 Common Homeowners Endorsements (scheduled property, water backup, ordinance or law)
8 National Portion: Personal Auto Policy - Liability & Injury
6.1 Personal Auto Policy Structure and Eligibility 6.2 Part A Liability and Supplementary Payments 6.3 Part B Medical Payments 6.4 Part C Uninsured/Underinsured Motorists
9 National Portion: Personal Auto Policy - Physical Damage & Duties
7.1 Part D Coverage for Damage to Your Auto (collision, other-than-collision) 7.2 Exclusions and Part E Duties After an Accident 7.3 Part F General Provisions, Endorsements, and No-Fault Concepts
10 National Portion: Liability Insurance Concepts
8.1 Negligence, Torts, and Legal Liability 8.2 Defenses, Damages, and Vicarious Liability 8.3 Occurrence vs. Claims-Made Triggers 8.4 Bodily Injury, Property Damage, and Personal/Advertising Injury
11 National Portion: Commercial Property Insurance
9.1 Commercial Package Policy Structure and Common Policy Conditions 9.2 Building and Personal Property Coverage Form (BPP) 9.3 Causes of Loss Forms (Basic, Broad, Special) 9.4 Business Income and Extra Expense 9.5 Commercial Property Endorsements and the BOP
12 National Portion: Commercial General Liability - Coverages
10.1 CGL Coverage A: Bodily Injury and Property Damage Liability 10.2 CGL Coverage B: Personal and Advertising Injury, Coverage C: Medical Payments 10.3 Who Is an Insured and Supplementary Payments
13 National Portion: Commercial General Liability - Limits, Triggers & Exclusions
11.1 CGL Limits of Insurance and Aggregates 11.2 Occurrence vs. Claims-Made CGL and Retroactive Dates 11.3 Key CGL Exclusions and Endorsements
14 National Portion: Commercial Auto Insurance
12.1 Business Auto Coverage Form and Covered Auto Symbols 12.2 Commercial Auto Liability and Physical Damage 12.3 Motor Carrier / Trucking and MCS-90 12.4 Garage Coverage Form and Garagekeepers 12.5 Commercial Auto Endorsements
15 National Portion: Workers Compensation
13.1 Workers Compensation Statutory Background and Benefits 13.2 Part One (Workers Comp) and Part Two (Employers Liability) 13.3 Premium Basis, Experience Modification, and Classification 13.4 Other States, USL&H, and Federal Acts 13.5 Workers Comp Exclusions and Endorsements
16 National Portion: Other Commercial Lines - BOP, Crime & Marine
14.1 Businessowners Policy (BOP) in Depth 14.2 Crime and Fidelity Coverage 14.3 Inland Marine and Nationwide Marine Definition 14.4 Ocean Marine Coverages (hull, cargo, freight, P&I)
17 National Portion: Other Commercial Lines - Specialty & Professional
15.1 Farm and Agricultural Coverage 15.2 Commercial Umbrella and Excess Liability 15.3 Professional Liability and Errors & Omissions 15.4 Directors & Officers and Employment Practices Liability
18 National Portion: Other Commercial Lines - Surety, Flood & Specialty
16.1 Surety and Fidelity Bonds 16.2 National Flood Insurance Program (NFIP) 16.3 Cyber, Aviation, and Other Specialty Lines
19 National Portion: Insurance Regulation & Market Conduct
17.1 State Regulation, Licensing, and the McCarran-Ferguson Act 17.2 Rates, Forms, Solvency, and Guaranty Associations 17.3 Producer Authority, Fiduciary Duty, and Company Operations
20 National Portion: Ethics & Unfair Trade Practices
18.1 Unfair Trade Practices and Unfair Claims Settlement 18.2 Producer Ethics, Errors & Omissions Exposure, and Fiduciary Conduct 18.3 Privacy, Fraud, and Consumer Protection
21 Chapter 1: Connecticut P&C Regulation & Licensing
1.1 Connecticut Insurance Department 1.2 Connecticut Producer Licensing Requirements
22 Chapter 2: Connecticut Property Insurance
2.1 Connecticut Homeowners Insurance 2.2 Connecticut FAIR Plan 2.3 Connecticut Commercial Property Insurance
23 Chapter 3: Connecticut Casualty & Auto Insurance
3.1 Connecticut Auto Insurance Requirements 3.2 Connecticut Workers' Compensation 3.3 Connecticut General Liability Insurance
24 Chapter 4: Connecticut Ethics & Professional Conduct
4.1 Ethical Principles and Fiduciary Duties 4.2 Prohibited Practices Under Connecticut Law 4.3 Consumer Protection in Connecticut
13.3 Premium Basis, Experience Modification, and Classification
Key Takeaways Explain This Topic AI
Workers comp premium = (payroll per $100) x classification rate, then adjusted by the experience modification factor.
Payroll is the exposure base; premium is estimated at inception and audited at expiration.
Each job is assigned an NCCI classification code reflecting its hazard level.
An experience mod (ex-mod) above 1.00 surcharges premium; below 1.00 credits it; 1.00 is average.
The mod compares the insured's actual losses to expected losses for its class, rewarding safety.
Last updated: June 2026
How Premium Is Built
Workers compensation is a payroll-rated, auditable line. The exposure base is remuneration (payroll) , and the manual premium formula is:
Manual premium = (Payroll / 100) x Class rate
Because actual payroll is unknown when the policy starts, the carrier charges a deposit (estimated) premium at inception and performs a premium audit at expiration to charge or refund the difference.
Classification Codes
NCCI assigns each type of work a classification code reflecting its hazard. A clerical office worker (low code rate) costs far less per $100 of payroll than a roofer (high code rate). Most employers have a governing classification plus standard exceptions like clerical and outside sales.
- Job Sample rate per $100 payroll
- Clerical office $0.15
- Retail store $1.80
- Carpentry $9.50
- Roofing $22.00
Exam trap: payroll is divided by 100 , not 1,000. A rate of $9.50 means $9.50 of premium for each $100 of payroll.
Worked Manual Premium
A carpentry shop has $400,000 of payroll at a carpentry rate of $9.50 per $100 .
Payroll units = $400,000 / 100 = 4,000 .
Manual premium = 4,000 x $9.50 = $38,000 .
If the firm also has a clerk earning $50,000 at $0.15 :
Clerk premium = (50,000 / 100) x $0.15 = $75 .
Total manual premium = $38,000 + $75 = $38,075 .
The Experience Modification Factor
Employers large enough to qualify receive an experience modification factor (ex-mod, or EMR) . It compares the employer's actual losses to the expected losses for businesses in its class over a rating period (typically three years, excluding the most recent year).
Mod = 1.00 is exactly average.
Mod above 1.00 is a debit (surcharge) , signaling worse-than-average losses.
Mod below 1.00 is a credit (discount) , rewarding good safety experience.
Applying the Mod
The ex-mod multiplies the manual premium:
Modified premium = Manual premium x Experience mod
Using the carpentry shop's $38,075 manual premium:
With a favorable mod of 0.85 : $38,075 x 0.85 = $32,364 (a $5,711 saving).
With an unfavorable mod of 1.25 : $38,075 x 1.25 = $47,594 (a $9,519 surcharge).
The spread between those two outcomes shows why loss control drives the largest premium swings in this line.
Other Premium Modifiers
Premium discount: a volume discount that lowers the rate per unit as total premium rises (large accounts are cheaper to administer).
Schedule rating / scheduled credits: subjective credits or debits for specific risk characteristics where allowed.
Retrospective rating: a plan where final premium adjusts within a min/max band based on the insured's own losses during the policy term, used by large accounts willing to bear loss volatility.
Exam trap: the ex-mod is retrospective in spirit but prospective in application — it is built from past losses but applied to the upcoming policy's premium, whereas a retro plan adjusts the current term's premium after the fact.
Audit and the Estimated Premium
Because payroll is the exposure base, the policy is always auditable . At inception the carrier collects a deposit premium based on the insured's payroll estimate. At expiration the premium audit measures actual payroll.
If the business grew, actual payroll exceeds the estimate and the insured owes additional premium . If it shrank, the insured receives a return premium . An employer that refuses to cooperate with the audit can be charged an estimated audit premium, often at the highest applicable class rate.
- Audit finding Result
- Actual payroll above estimate Additional premium billed
- Actual payroll below estimate Return premium issued
- Audit refused Estimated premium charged
This audit mechanism is why understating payroll never saves money long-term: the true exposure surfaces at audit and the premium follows it.
What counts as remuneration
The payroll base is remuneration , which is broader than base wages. It generally includes salaries, hourly pay, commissions, bonuses, overtime (often at straight-time after backing out the premium portion), holiday and vacation pay, and the value of certain in-kind compensation such as lodging. It typically excludes items like reimbursed business expenses, employer contributions to qualified benefit plans, and certain severance. Misjudging what to include is a common source of audit disputes, so producers should set the deposit premium on a realistic remuneration estimate rather than an artificially low one.
The experience-rating window and unit statistical data
The ex-mod is calculated by the rating bureau (NCCI in most states) from unit statistical reports the insurer files, using a rating period that typically spans three years but drops the most recent policy year so the data is mature. The formula weights frequency (number of claims) more heavily than severity (size of a single claim), because frequent small losses predict future losses better than one large shock loss. This is why an employer with many minor recordable injuries can carry a higher mod than one with a single catastrophic claim - a counterintuitive point the exam likes to test.
Exam Tip : Manual premium = (payroll/100) x rate; modified premium = manual x ex-mod; a mod below 1.00 is a credit and above 1.00 a debit; and the audit, not the deposit, sets the final premium based on actual remuneration.