Study guide
1.1 Engineering Mathematics: Algebra, Trigonometry & Geometry in Weldments
AWS CWEng Certified Welding Engineer Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & CWEng Exam Overview
About the CWEng Exam: Four Parts, 163 Questions & Testing Logistics Scoring, Composite Weighting, Eligibility & Five-Year Renewal How to Use This Guide & Build Your Open-Book Reference Set
2 Chapter 1: Mathematics & Statistics for Welding Engineers
1.1 Engineering Mathematics: Algebra, Trigonometry & Geometry in Weldments 1.2 Differential & Integral Calculus Fundamentals in Engineering Analysis 1.3 Applied Engineering Statistics, Population Distributions & Quality Metrics 1.4 Polynomial Equations, Conic Sections & Complex Numbers
3 Chapter 2: Physics Fundamentals & Mechanics
2.1 Unit Systems, Dimensional Analysis & Engineering Conversions 2.2 Mechanics: Statics, Equilibrium, Force Vectors & Moments 2.3 Work, Energy, Power & Mechanical Advantage in Welding Systems 2.4 Thermal Physics, Linear/Volumetric Expansion & Heat Capacity
4 Chapter 3: General & Physical Chemistry for Welding
3.1 Atomic Structure, Bonding & Solid-Solution Thermodynamics 3.2 Hume-Rothery Compatibility, Interstitial Strain & HSLA Microalloy Scavenging 3.3 Gas Laws, Dalton Partial Pressures, Arc Dissociation & Sieverts Law 3.4 Cylinder Capacity, Available Arc Time & Gas-Related Porosity Diagnosis 3.5 Redox Thermodynamics, Deoxidation & Slag-Metal Refining 3.6 Basicity Index Calculations, Toughness Prediction & Cryogenic Consumable Selection
5 Chapter 4: Strength of Materials & Mechanics of Materials
4.1 Engineering vs. True Stress-Strain, Elastic Constants & Z-Direction Ductility 4.2 Plane Stress vs. Plane Strain, Triaxial Restraint & Alloy Property Comparison 4.3 Beam Bending, Transverse Shear, Torsion & Mohr Circle Construction 4.4 Multiaxial Yield Criteria & Combined-Load Analysis of Welded Members 4.5 Fatigue Life, Weld-Toe Stress Concentration & Paris-Erdogan Crack Growth 4.6 LEFM Fracture Toughness, Ductile-Brittle Transition & Larson-Miller Creep 4.7 Comparative Failure-Mode Synthesis & Integrated Flaw and Creep Assessment
6 Chapter 5: Heat Transfer & Fluid Mechanics in Welding
5.1 Fourier Conduction, Rosenthal Moving Heat Source & 2D vs. 3D Heat Flow 5.2 Adams Cooling Rate, the t8/5 Window & HAZ Peak-Temperature Distribution 5.3 Convection, Stefan-Boltzmann Radiation & Emissivity of Weld Surfaces 5.4 Arc Radiation Losses, Preheat Maintenance & PWHT Boundary Conditions 5.5 Fluid Statics, Bernoulli, Viscosity & Reynolds-Number Regimes 5.6 Gas Lens Mechanics, Buoyancy Effects & Torch Flow Design 5.7 Hyperbaric, Vacuum & Controlled-Atmosphere Welding Environments
7 Chapter 6: Electrical Engineering Principles for Welding Systems
6.1 DC and AC Waveforms, Polarity Thermodynamics & Welding Circuit Analysis 6.2 Joule Heating, Electrode Stickout Preheating & Circuit Voltage Distribution 6.3 Power Factor, Reactance, Impedance & Magnetic Transformer Principles 6.4 Lorentz Force, Electromagnetic Pinch Effect & Arc Blow
8 Chapter 7: Welding Heat Sources & Arc Physics
7.1 Volt-Ampere Characteristics, Operating Point, Self-Regulation & OCV Limits 7.2 Inductance, Slope Control & Dynamic Power-Source Response 7.3 Arc Fall Regions, Cathode Emission Mechanisms & Shielding-Gas Ionization 7.4 Maecker Plasma Jet, Degree of Ionization & Anode Heat Partitioning 7.5 Droplet Force Balance & Classification of Metal Transfer Regimes 7.6 Transition Current, Mode Comparison & Pulsed Waveform Design
9 Chapter 8: Arc Welding Processes & Parameter Controls
8.1 Shielded Metal Arc Welding (SMAW): Electrode Flux Chemistries & Variables 8.2 GMAW Process Physics, Transfer Modes & Shielding Gas Interactions 8.3 Solid, Metal-Cored & Flux-Cored Wires with CTWD and Parameter Envelopes 8.4 Gas Tungsten (GTAW) & Plasma Arc Welding (PAW): Electrodes & Keyholing 8.5 Submerged Arc Welding (SAW): Flux Basicity, Multi-Wire & High-Deposition Systems
10 Chapter 9: Advanced, Resistance & Solid-State Joining Processes
9.1 High-Energy-Density Beam Physics & Electron Beam Welding 9.2 Laser Beam Welding, EBW/LBW Comparison & Fiber Laser Parameter Derivation 9.3 Resistance Welding Physics, Electrode Materials & Spot Weld Sequence 9.4 Nugget Sizing, Seam and Projection Welding, and Lobe Curve Process Windows 9.5 Solid-State Joining: Friction Stir Welding (FSW), Explosion & Diffusion 9.6 Thermal Cutting & Gouging: Oxyfuel, Plasma Arc and Air Carbon Arc 9.7 High-Frequency, Flash, Stud & Ultrasonic Welding; Surfacing and Thermal Spray
11 Chapter 10: Physical & Transformation Metallurgy of Steels
10.1 Fe-Fe3C System, Crystal Lattices, c/a Ratio & Interstitial Solubility 10.2 Critical Temperatures, Invariant Reactions & the Lever Rule 10.3 Alloying Elements, the Gamma Loop & Phase-Fraction Calculations 10.4 TTT and CCT Diagrams, Constitutional Supercooling & Scheil Microsegregation 10.5 Non-Equilibrium Transformation Products & Martensite Modeling 10.6 HAZ Anatomy, Microstructural Sub-Zones & Multi-Pass Reheated Regions 10.7 HAZ Hardness Traverses, Toughness Gradients & Peak-Temperature Control
12 Chapter 11: Weldability, Cracking Mechanisms & Alloy Metallurgy
11.1 Hydrogen Cracking Conditions, Carbon Equivalent & Diffusible Hydrogen Control 11.2 Preheat, Interpass and Post-Heat Calculations for Cold-Crack Prevention 11.3 Solidification Cracking, Bead Aspect Ratio, Liquation & Lamellar Tearing 11.4 Lamellar Tearing Mitigation & Hot-Cracking Susceptibility Evaluation 11.5 Stainless Families, Schaeffler and WRC-1992 Diagrams, Ferrite Number & Sensitization 11.6 Duplex Stainless Metallurgy & Dissimilar-Metal Ferrite Prediction 11.7 Aluminum Oxide and Porosity Control, and Titanium Reactive-Metal Welding 11.8 Nickel Superalloys, Strain-Age Cracking & Guinier-Preston Aging Sequences
13 Chapter 12: Weldment Design, Stress Analysis & Joint Mechanics
12.1 AWS A2.4 Welding Symbol Anatomy, Symbol Library & Dimension Syntax 12.2 Joint Architecture, CJP versus PJP, and NDE Examination Symbols 12.3 Fillet and Groove Weld Sizing under Direct Stress in ASD and LRFD 12.4 Plug and Slot Welds, Stress Gradients & the Fillet Weld Break Test 12.5 Eccentric Loading Analysis: Elastic Vector Method vs Instantaneous Center 12.6 Fatigue Design of Welded Connections & Residual Stress/Distortion Control
14 Chapter 13: Non-Destructive Examination (NDE) & Discontinuity Analysis
13.1 Visual Testing Gages & Liquid Penetrant Capillary Mechanics 13.2 Magnetic Particle Testing: Flux Leakage, Field Geometry & Prod Amperage 13.3 Radiographic Physics, Geometric Unsharpness, Density & IQI Sensitivity 13.4 Computed and Digital Radiography & Radiographic Discontinuity Interpretation 13.5 Acoustic Wave Mechanics, Refraction & Angle-Beam Sound-Path Geometry 13.6 AWS D1.1 Decibel Rating, Phased Array & Time-of-Flight Diffraction
15 Chapter 14: Brazing, Soldering & Industrial Welding Safety
14.1 Brazing Thermodynamics, Capillary Wetting Physics & Joint Clearance 14.2 AWS A5.8 Brazing Filler Metals, FB Fluxes & Industrial Heating Processes 14.3 Soldering Fundamentals, Flux Chemistries & Intermetallic Formation 14.4 Hierarchy of Controls, Electric Shock Physics & Industrial Ventilation 14.5 Fume Exposure Limits, Arc Radiation, Hot Work and Confined-Space Entry 14.6 Arc-Generated Toxic Gases, Moving-Equipment Hazards & TWA Exposure Calculation
16 Chapter 15: Structural Fabrication & AWS D1.1 Code Implementation
15.1 AWS D1.1 Scope, Prequalification Limits, Base-Metal Groups & Matching Filler 15.2 Prequalified Joint Details, Backing Systems & Joint Specification Verification 15.3 Thermal Cut Edges, Fit-Up Tolerances & Minimum Preheat Requirements 15.4 Preheat Application Zones, Measurement Instrumentation & Fabrication Audits 15.5 PWHT Fundamentals, D1.1 Thermal Cycles & Visual Acceptance Criteria 15.6 D1.1 Nondestructive Examination Protocols, PWHT Scheduling & Visual Audit Practice
17 Chapter 16: Welding Procedure Qualification (WPS & PQR) per ASME IX & AWS B2.1
16.1 PQR versus WPS Hierarchy, Qualification Workflow & Standard Procedures 16.2 Manufacturer Responsibility, Subcontracting Limits & Multi-Process Qualification 16.3 Essential, Supplementary Essential and Nonessential Variables with Heat Input Mechanics 16.4 Waveform-Controlled Power Sources, Appendix H & Heat-Input Compliance 16.5 P-Numbers, Group Numbers, F-Numbers & A-Numbers 16.6 QW-451 Mechanical Test Protocols & Procedure Qualification Test Evaluation
18 Chapter 17: Filler Metal Specifications, Selection & Consumable Control
17.1 AWS A5 Architecture: SMAW, GMAW/GTAW and FCAW Consumable Classifications 17.2 SAW Wire-Flux Systems, Alloy Pickup & PWHT Property Effects 17.3 Stainless Filler Specifications, Solidification Modes & Dissimilar-Metal Joints 17.4 AWS A5.10 Aluminum Filler Selection & Dilution and Ferrite-Number Calculations 17.5 Consumable Storage, Conditioning Envelopes & Atmospheric Exposure Limits 17.6 Low-Hydrogen Designators, the Yurioka Parameter & Preheat Sizing
19 Chapter 18: Welder Performance Qualification, Quality Management & Welding Economics
18.1 Welder Qualification Philosophy, Test Positions & Thickness and Diameter Ranges 18.2 F-Number Hierarchy, Operator Qualification & Continuity Requirements 18.3 ISO 3834, Welding Coordination, Inspection Test Plans & Equipment Validation 18.4 EN 10204 Material Certification, Traceability & Heat-Input Nonconformance Auditing 18.5 Weld Cost Anatomy, Deposition Rates, Operating Factor & the Overwelding Law 18.6 Economic Optimization Strategies & Fabrication Cost Comparison
1.1 Engineering Mathematics: Algebra, Trigonometry & Geometry in Weldments
Key Takeaways Explain This Topic AI
Groove weld volume and joint opening dimensions depend strictly on right-triangle trigonometry governed by root opening, plate thickness, root face, and bevel angle.
Theoretical throat in an equal-leg fillet weld equals 0.707 times the leg size, but effective throat can incorporate deep-penetration credit (such as submerged arc welding per AWS D1.1), while unequal-leg fillets require rigorous trigonometric calculation.
Converting a single-V groove into a symmetrical double-V groove reduces the theoretical bevel filler metal volume by 50%, significantly mitigating angular distortion and consumable cost.
Non-orthogonal structural joints (skewed T-joints) require the Law of Sines, Law of Cosines, and dihedral angle (Ψ) transformations to establish correct effective throats and fit-up allowances.
Welding parameter relationships—including heat input, travel speed, wire feed speed, and deposition rate—are algebraically coupled and must be rearranged dynamically to maintain code-mandated thermal envelopes.
Last updated: September 2026
1.1 Engineering Mathematics: Algebra, Trigonometry & Geometry in Weldments
Quick Answer: Precise weldment sizing requires applying right-triangle trigonometry and solid geometry to joint cross-sections. For a single-V groove, the bevel width is w b = ( t − f ) tan ( β ) w_b = (t - f) \tan(\beta) w b = ( t − f ) tan ( β ) and total groove opening width is W = R + 2 ( t − f ) tan ( β ) W = R + 2(t - f) \tan(\beta) W = R + 2 ( t − f ) tan ( β ) . In fillet welds, theoretical throat is t t = w cos ( 45 ∘ ) ≈ 0.707 w t_t = w \cos(45^\circ) \approx 0.707 w t t = w cos ( 4 5 ∘ ) ≈ 0.707 w for equal legs, while unequal legs require t t = ( w 1 w 2 ) / w 1 2 + w 2 2 t_t = (w_1 w_2)/\sqrt{w_1^2 + w_2^2} t t = ( w 1 w 2 ) / w 1 2 + w 2 2 . Skewed joints with dihedral angle Ψ \Psi Ψ demand the Law of Cosines to calculate fit-up setbacks and effective design throats.
Weld Joint Geometry and Right-Triangle Trigonometry
Weld joint preparation forms the foundation of structural integrity, weld economics, and distortion control. The welding engineer must translate two-dimensional joint drawings into exact volume and mass requirements. Every groove configuration—whether square, bevel, V, J, or U—is an assembly of elementary geometric shapes: rectangles, right triangles, circular sectors, and circular or parabolic caps. |<------------- W ------------->|
- | w_b | R | w_b |
- ------------+-----------+-------+-----------+-------------
- | \ | | / |
- | \ | | / |
- t | \ | | / | d_b = t - f
- | \ β | | β / |
- | \-----|-------|------/ |
- | | | | | |
- -----------------+-----+-------+------+-------------------
- |<--f-->| (Root Face)
- |<--R-->| (Root Opening)
- Standard Joint Nomenclature (AWS A3.0)
Parameter Symbol Standard Terminology Definition / Engineering Function
t t t Plate Thickness Nominal thickness of the base metal members being joined.
β \beta β Bevel Angle Angle formed between the prepared edge of a member and a plane perpendicular to its surface.
α \alpha α Included Groove Angle Total angle of the groove between workpieces; for symmetric single-V, α = 2 β \alpha = 2\beta α = 2 β .
R R R Root Opening Separation between the workpieces at the joint root prior to welding.
f f f Root Face Portion of the groove face adjacent to the root of the joint (the "land").
d b d_b d b Depth of Bevel Vertical dimension of the prepared bevel: d b = t − f d_b = t - f d b = t − f .
w b w_b w b Bevel Width Lateral width of the preparation at the plate surface: w b = d b tan ( β ) w_b = d_b \tan(\beta) w b = d b tan ( β ) .
W W W Groove Opening Width Total surface distance between groove edges: W = R + 2 w b W = R + 2 w_b W = R + 2 w b .
Derivation of Groove Cross-Sectional Area
To compute the cross-sectional area of a single-V groove butt joint, dissect the joint geometry into two distinct zones: the root rectangle zone and the beveled trapezoid zone.
Root Rectangle Area ( A root A_{\text{root}} A root ): A root = R × t A_{\text{root}} = R \times t A root = R × t
This accounts for the rectangular gap extending through the full plate thickness t t t across root opening R R R .
Bevel Wings Area ( A bevel A_{\text{bevel}} A bevel ): The prepared bevels on each side form two right triangles, each having a vertical leg equal to the depth of bevel d b = ( t − f ) d_b = (t - f) d b = ( t − f ) and a horizontal leg equal to w b = ( t − f ) tan ( β ) w_b = (t - f) \tan(\beta) w b = ( t − f ) tan ( β ) . Combining both symmetric bevel wings yields: A bevel = 2 × [ 1 2 ( t − f ) ⋅ w b ] = ( t − f ) 2 tan ( β ) A_{\text{bevel}} = 2 \times \left[ \frac{1}{2} (t - f) \cdot w_b \right] = (t - f)^2 \tan(\beta) A bevel = 2 × [ 2 1 ( t − f ) ⋅ w b ] = ( t − f ) 2 tan ( β )
Total Groove Preparation Area ( A groove A_{\text{groove}} A groove ): A groove = R ⋅ t + ( t − f ) 2 tan ( β ) A_{\text{groove}} = R \cdot t + (t - f)^2 \tan(\beta) A groove = R ⋅ t + ( t − f ) 2 tan ( β )
For an asymmetrical single-bevel butt joint (where one plate edge is square and the second member is beveled at angle β \beta β ): A single-bevel = R ⋅ t + 1 2 ( t − f ) 2 tan ( β ) A_{\text{single-bevel}} = R \cdot t + \frac{1}{2} (t - f)^2 \tan(\beta) A single-bevel = R ⋅ t + 2 1 ( t − f ) 2 tan ( β )
Single-V vs. Double-V Volume Optimization
When plate thickness exceeds approximately 16 mm 16\text{ mm} 16 mm ( 5 / 8 in 5/8\text{ in} 5/8 in ), standard practice dictates evaluating a double-V preparation. Consider a plate of thickness t t t with zero root opening ( R = 0 R = 0 R = 0 ) and zero root face ( f = 0 f = 0 f = 0 ):
Single-V Groove Area: A SV = t 2 tan ( β ) A_{\text{SV}} = t^2 \tan(\beta) A SV = t 2 tan ( β )
Symmetrical Double-V Groove Area: Each side has depth t / 2 t/2 t /2 . The area of each side is ( t / 2 ) 2 tan ( β ) = t 2 4 tan ( β ) (t/2)^2 \tan(\beta) = \frac{t^2}{4} \tan(\beta) ( t /2 ) 2 tan ( β ) = 4 t 2 tan ( β ) . Summing both sides: A DV = 2 [ t 2 4 tan ( β ) ] = 1 2 t 2 tan ( β ) = 0.50 A SV A_{\text{DV}} = 2 \left[ \frac{t^2}{4} \tan(\beta) \right] = \frac{1}{2} t^2 \tan(\beta) = 0.50 A_{\text{SV}} A DV = 2 [ 4 t 2 tan ( β ) ] = 2 1 t 2 tan ( β ) = 0.50 A SV
Splitting the joint into a symmetrical double-V cuts the theoretical bevel weld metal volume by exactly 50% . This massive reduction decreases total arc time, lowers heat input, cuts consumable costs, and balances transverse shrinkage stresses about the neutral axis, virtually eliminating angular distortion.
Fillet Weld Geometry: Theoretical, Effective, and Actual Throats
Fillet welds transmit shear, tension, and compressive stresses across intersecting plates. The engineering sizing of fillet welds is strictly governed by the dimensions of the internal inscribed right triangle. |\
- | \ Convexity (C)
- | \---_
- | \ `\
- | \ \
- w | t_t \ | Actual Face
- | \ /
- | \/
- +--------+-----------------
- w
- |<----->| Leg Length (w)
- Geometric Throat Definitions
Leg Length ( w w w or z z z ): The distance from the joint root to the toe of the fillet weld along either plate surface.
Theoretical Throat ( t t t_t t t ): The distance from the beginning of the joint root perpendicular to the hypotenuse of the largest right triangle that can be inscribed within the fillet weld cross-section.
For an equal-leg fillet weld ( w 1 = w 2 = w w_1 = w_2 = w w 1 = w 2 = w ): t t = w sin ( 45 ∘ ) = w cos ( 45 ∘ ) = w 2 ≈ 0.7071 w t_t = w \sin(45^\circ) = w \cos(45^\circ) = \frac{w}{\sqrt{2}} \approx 0.7071 w t t = w sin ( 4 5 ∘ ) = w cos ( 4 5 ∘ ) = 2 w ≈ 0.7071 w
Effective Throat ( t e t_e t e ): The minimum distance from the root of a weld to its face, minus any convexity. Under AWS D1.1 (Structural Welding Code—Steel), Clause 4.4.2, when submerged arc welding (SAW) is used, deep penetration credit is permitted:
For fillet weld leg size w ≤ 9.5 mm w \le 9.5\text{ mm} w ≤ 9.5 mm ( 3 / 8 in 3/8\text{ in} 3/8 in ): t e = w t_e = w t e = w .
For fillet weld leg size w > 9.5 mm w > 9.5\text{ mm} w > 9.5 mm : t e = 0.707 w + 2.8 mm t_e = 0.707 w + 2.8\text{ mm} t e = 0.707 w + 2.8 mm ( 0.11 in 0.11\text{ in} 0.11 in ).
Actual Throat ( t a t_a t a ): The shortest distance between the joint root and the actual face of the weld. For a convex weld with convexity C C C , t a = t t + C t_a = t_t + C t a = t t + C . For a concave weld, t a t_a t a is less than t t t_t t t unless the leg size has been intentionally increased to maintain the design throat.
Unequal-Leg Fillet Welds
When structural stress states require unequal legs ( w 1 ≠ w 2 w_1 \ne w_2 w 1 = w 2 , such as in lap joints subject to shear and peeling): t t = w 1 ⋅ w 2 w 1 2 + w 2 2 t_t = \frac{w_1 \cdot w_2}{\sqrt{w_1^2 + w_2^2}} t t = w 1 2 + w 2 2 w 1 ⋅ w 2
The angle θ \theta θ between leg w 1 w_1 w 1 and the theoretical throat line is: θ = arctan ( w 2 w 1 ) \theta = \arctan\left(\frac{w_2}{w_1}\right) θ = arctan ( w 1 w 2 )
Weld Volume, Reinforcement Cap, and Consumable Estimation
Weld metal volume dictates consumable procurement, wire feed speed schedules, and arc-on duration. The total volume equals total cross-sectional area multiplied by weld length L L L .
Reinforcement Cap Modeling
Structural codes (e.g., AWS D1.1 Table 8.1, ASME Section IX) prohibit excessive weld reinforcement because sharp reentrant angles create fatigue notch stress concentrations. Reinforcement height h reinf h_{\text{reinf}} h reinf is typically limited to 3.2 mm 3.2\text{ mm} 3.2 mm ( 1 / 8 in 1/8\text{ in} 1/8 in ). The cap geometry is modeled as a parabolic segment: A cap = 2 3 W cap ⋅ h reinf A_{\text{cap}} = \frac{2}{3} W_{\text{cap}} \cdot h_{\text{reinf}} A cap = 3 2 W cap ⋅ h reinf
where W cap = W + 2 Δ w W_{\text{cap}} = W + 2 \Delta w W cap = W + 2Δ w , with Δ w \Delta w Δ w representing the lateral toe overlap margin (typically 1.5 to 2.5 mm 1.5\text{ to }2.5\text{ mm} 1.5 to 2.5 mm beyond each groove shoulder).
If root reinforcement (penetration bead) h root h_{\text{root}} h root is present: A root-cap = 2 3 R ⋅ h root A_{\text{root-cap}} = \frac{2}{3} R \cdot h_{\text{root}} A root-cap = 3 2 R ⋅ h root
Consumable Mass and Deposition Efficiency
The mass of deposited weld metal ( M dep M_{\text{dep}} M dep ) is: M dep = A total ⋅ L ⋅ ρ M_{\text{dep}} = A_{\text{total}} \cdot L \cdot \rho M dep = A total ⋅ L ⋅ ρ
where ρ \rho ρ is the density of the weld metal (for carbon and low-alloy steel, ρ = 7.85 × 10 − 6 kg/mm 3 = 0.2833 lb/in 3 \rho = 7.85 \times 10^{-6}\text{ kg/mm}^3 = 0.2833\text{ lb/in}^3 ρ = 7.85 × 1 0 − 6 kg/mm 3 = 0.2833 lb/in 3 ).
The total mass of consumable to purchase ( M purchased M_{\text{purchased}} M purchased ) accounts for the deposition efficiency η dep \eta_{\text{dep}} η dep and shop losses (stub ends, spatter, coil tail ends): M purchased = M dep η dep ⋅ ( 1 − L shop ) M_{\text{purchased}} = \frac{M_{\text{dep}}}{\eta_{\text{dep}} \cdot (1 - L_{\text{shop}})} M purchased = η dep ⋅ ( 1 − L shop ) M dep
Welding Process AWS Classification Example Typical Deposition Efficiency ( η dep \eta_{\text{dep}} η dep ) Typical Shop Loss Factor ( L shop L_{\text{shop}} L shop )
- SMAW AWS A5.1 E7018 55% – 65% (electrode stub loss is significant) 5% – 10%
- GMAW (Solid Wire) AWS A5.18 ER70S-6 92% – 97% (Ar/CO₂ shielding) 2% – 5%
- FCAW-G (Gas-Shielded) AWS A5.20 E71T-1M 82% – 88% (slag + spatter) 3% – 5%
- FCAW-S (Self-Shielded) AWS A5.20 E71T-8 78% – 84% (heavy slag loss) 4% – 6%
- SAW AWS A5.17 EM12K 98% – 100% (negligible spatter) 1% – 3%
- Skewed T-Joints, Dihedral Angles, and the Law of Sines & Cosines
When structural members intersect at angles other than 90 ∘ 90^\circ 9 0 ∘ , the joint is classified as a skewed T-joint. The dihedral angle Ψ \Psi Ψ represents the true spatial angle between the intersecting plate surfaces. / / Member 2
- / /
- / /
- / Ψ / <-- Acute Side (Ψ < 90°)
- / /
- =============+===+=================== Member 1
- \ <-- Obtuse Side (Ψ > 90°)
- Dihedral Angle Calculations (AWS D1.1 Clause 4.4.2.6 and Annex A)
In skewed T-joints, one side forms an acute angle ( Ψ < 90 ∘ \Psi < 90^\circ Ψ < 9 0 ∘ ) while the opposite side forms an obtuse angle ( Ψ > 90 ∘ \Psi > 90^\circ Ψ > 9 0 ∘ , where Ψ obtuse = 180 ∘ − Ψ acute \Psi_{\text{obtuse}} = 180^\circ - \Psi_{\text{acute}} Ψ obtuse = 18 0 ∘ − Ψ acute ).
Acute Side Effective Throat: On the acute side, the gap at the root increases due to fit-up difficulty. For an acute dihedral angle Ψ \Psi Ψ : t e = w sin ( Ψ 2 ) − z t_e = w \sin\left(\frac{\Psi}{2}\right) - z t e = w sin ( 2 Ψ ) − z
where z z z is the root setback distance (unwelded root gap allowance specified in AWS D1.1 Table 4.2 (Z Loss Dimension), which ranges from 0 0 0 to 6 mm 6\text{ mm} 6 mm depending on Ψ \Psi Ψ ).
Obtuse Side Effective Throat: For obtuse angles, the theoretical throat flattens, requiring larger leg sizes to achieve the design effective throat: t e = w sin ( Ψ ) cos ( θ ) + sin ( θ ) t_e = \frac{w \sin(\Psi)}{\cos(\theta) + \sin(\theta)} t e = cos ( θ ) + sin ( θ ) w sin ( Ψ )
Application of Law of Sines and Law of Cosines: In spatial structural framing, such as offshore jacket tubular intersections and heavy truss gusset assemblies, determining the dihedral angle Ψ \Psi Ψ and cut lengths requires vector trigonometry:
Law of Cosines: To calculate the spatial distance c c c between structural nodes or joint corners: c 2 = a 2 + b 2 − 2 a b cos ( C ) c^2 = a^2 + b^2 - 2ab \cos(C) c 2 = a 2 + b 2 − 2 ab cos ( C )
Law of Sines: To resolve internal weld fit-up angles θ A , θ B \theta_A, \theta_B θ A , θ B : a sin ( A ) = b sin ( B ) = c sin ( C ) \frac{a}{\sin(A)} = \frac{b}{\sin(B)} = \frac{c}{\sin(C)} sin ( A ) a = sin ( B ) b = sin ( C ) c
Algebraic Manipulation of Welding Heat Input and Deposition Rate
Welding engineers must continuously manipulate parametric equations to satisfy Procedure Qualification Records (PQRs) and Welding Procedure Specifications (WPSs).
Heat Input Equation (AWS D1.1 / ASME Section IX) H = η ⋅ V ⋅ I ⋅ 60 1000 ⋅ v ( kJ/mm ) H = \frac{\eta \cdot V \cdot I \cdot 60}{1000 \cdot v} \quad (\text{kJ/mm}) H = 1000 ⋅ v η ⋅ V ⋅ I ⋅ 60 ( kJ/mm )
where:
- V V V = Arc voltage (volts, V \text{V} V )
- I I I = Welding current (amperes, A \text{A} A )
- v v v = Travel speed ( mm/min \text{mm/min} mm/min )
η \eta η = Arc thermal efficiency factor (dimensionless; ASME IX defines heat input without η \eta η , whereas European standard EN 1011-1 and AWS B5.16 explicitly incorporate arc efficiency: SAW η ≈ 1.0 \eta \approx 1.0 η ≈ 1.0 , SMAW η ≈ 0.80 \eta \approx 0.80 η ≈ 0.80 , GMAW η ≈ 0.85 \eta \approx 0.85 η ≈ 0.85 , GTAW η ≈ 0.65 \eta \approx 0.65 η ≈ 0.65 ).
To solve algebraically for the required travel speed v v v given a code-mandated maximum heat input H max H_{\max} H m a x : v = η ⋅ V ⋅ I ⋅ 60 1000 ⋅ H max v = \frac{\eta \cdot V \cdot I \cdot 60}{1000 \cdot H_{\max}} v = 1000 ⋅ H m a x η ⋅ V ⋅ I ⋅ 60
Deposition Rate Algebra
Deposition rate ( D R DR D R , in kg/h \text{kg/h} kg/h ) as a function of wire feed speed ( W F S WFS W FS , in m/min \text{m/min} m/min ) and wire diameter ( d d d , in mm \text{mm} mm ): D R = 60 ⋅ W F S ⋅ [ π ( d 2 ) 2 ] ⋅ ρ ⋅ η dep ⋅ 10 − 3 DR = 60 \cdot WFS \cdot \left[ \pi \left(\frac{d}{2}\right)^2 \right] \cdot \rho \cdot \eta_{\text{dep}} \cdot 10^{-3} D R = 60 ⋅ W FS ⋅ [ π ( 2 d ) 2 ] ⋅ ρ ⋅ η dep ⋅ 1 0 − 3
For a solid steel wire with diameter d = 1.2 mm d = 1.2\text{ mm} d = 1.2 mm and density ρ = 7.85 × 10 − 3 g/mm 3 \rho = 7.85 \times 10^{-3}\text{ g/mm}^3 ρ = 7.85 × 1 0 − 3 g/mm 3 : D R = 60 ⋅ W F S ⋅ ( π ⋅ 1.44 4 ) ⋅ 7.85 × 10 − 6 ⋅ η dep = 0.0005327 ⋅ W F S ⋅ η dep ( kg/h ) DR = 60 \cdot WFS \cdot \left( \frac{\pi \cdot 1.44}{4} \right) \cdot 7.85 \times 10^{-6} \cdot \eta_{\text{dep}} = 0.0005327 \cdot WFS \cdot \eta_{\text{dep}} \quad (\text{kg/h}) D R = 60 ⋅ W FS ⋅ ( 4 π ⋅ 1.44 ) ⋅ 7.85 × 1 0 − 6 ⋅ η dep = 0.0005327 ⋅ W FS ⋅ η dep ( kg/h )
- Comprehensive Worked Numerical Example: Complete Weldment Geometry & Consumable Takeoff
- Problem Statement
An engineering firm is fabricating a 12.0 m 12.0\text{ m} 12.0 m ( 12 , 000 mm 12,000\text{ mm} 12 , 000 mm ) long butt-welded longitudinal girder seam in structural steel. The plate thickness is t = 25.0 mm t = 25.0\text{ mm} t = 25.0 mm . The joint is designed as a single-V groove butt joint with:
Included groove angle α = 60 ∘ \alpha = 60^\circ α = 6 0 ∘ (symmetrical bevel β = 30 ∘ \beta = 30^\circ β = 3 0 ∘ )
- Root opening R = 3.0 mm R = 3.0\text{ mm} R = 3.0 mm
- Root face f = 2.0 mm f = 2.0\text{ mm} f = 2.0 mm
- Weld cap reinforcement height h reinf = 2.5 mm h_{\text{reinf}} = 2.5\text{ mm} h reinf = 2.5 mm
- Weld cap toe overlap margin Δ w = 2.0 mm \Delta w = 2.0\text{ mm} Δ w = 2.0 mm on each side
- Negligible root penetration drop-through ( h root = 0 h_{\text{root}} = 0 h root = 0 )
Consumable: AWS A5.20 E71T-1M FCAW-G wire with deposition efficiency η dep = 0.86 \eta_{\text{dep}} = 0.86 η dep = 0.86
Shop loss factor L shop = 0.05 L_{\text{shop}} = 0.05 L shop = 0.05 (5% loss for stub ends, spatter, and coil tails)
Steel density ρ = 7.85 × 10 − 6 kg/mm 3 \rho = 7.85 \times 10^{-6}\text{ kg/mm}^3 ρ = 7.85 × 1 0 − 6 kg/mm 3
Calculate: (a) bevel width w b w_b w b and surface opening width W W W , (b) groove cross-sectional area A groove A_{\text{groove}} A groove , (c) cap reinforcement area A cap A_{\text{cap}} A cap , (d) total deposited weld mass M dep M_{\text{dep}} M dep , and (e) total mass of FCAW wire to procure M purchased M_{\text{purchased}} M purchased .
Step-by-Step Solution
Step 1: Compute depth of bevel ( d b d_b d b ) and bevel width ( w b w_b w b ) d b = t − f = 25.0 mm − 2.0 mm = 23.0 mm d_b = t - f = 25.0\text{ mm} - 2.0\text{ mm} = 23.0\text{ mm} d b = t − f = 25.0 mm − 2.0 mm = 23.0 mm w b = d b ⋅ tan ( β ) = 23.0 ⋅ tan ( 30 ∘ ) = 23.0 ⋅ 0.57735 = 13.279 mm w_b = d_b \cdot \tan(\beta) = 23.0 \cdot \tan(30^\circ) = 23.0 \cdot 0.57735 = 13.279\text{ mm} w b = d b ⋅ tan ( β ) = 23.0 ⋅ tan ( 3 0 ∘ ) = 23.0 ⋅ 0.57735 = 13.279 mm
Step 2: Compute total surface opening width ( W W W ) W = R + 2 ⋅ w b = 3.0 mm + 2 ( 13.279 mm ) = 3.0 + 26.558 = 29.56 mm W = R + 2 \cdot w_b = 3.0\text{ mm} + 2(13.279\text{ mm}) = 3.0 + 26.558 = 29.56\text{ mm} W = R + 2 ⋅ w b = 3.0 mm + 2 ( 13.279 mm ) = 3.0 + 26.558 = 29.56 mm
Step 3: Calculate groove cross-sectional area ( A groove A_{\text{groove}} A groove ) A root = R ⋅ t = 3.0 ⋅ 25.0 = 75.0 mm 2 A_{\text{root}} = R \cdot t = 3.0 \cdot 25.0 = 75.0\text{ mm}^2 A root = R ⋅ t = 3.0 ⋅ 25.0 = 75.0 mm 2 A bevel = ( t − f ) 2 tan ( β ) = ( 23.0 ) 2 ⋅ tan ( 30 ∘ ) = 529.0 ⋅ 0.57735 = 305.42 mm 2 A_{\text{bevel}} = (t - f)^2 \tan(\beta) = (23.0)^2 \cdot \tan(30^\circ) = 529.0 \cdot 0.57735 = 305.42\text{ mm}^2 A bevel = ( t − f ) 2 tan ( β ) = ( 23.0 ) 2 ⋅ tan ( 3 0 ∘ ) = 529.0 ⋅ 0.57735 = 305.42 mm 2 A groove = A root + A bevel = 75.0 + 305.42 = 380.42 mm 2 A_{\text{groove}} = A_{\text{root}} + A_{\text{bevel}} = 75.0 + 305.42 = 380.42\text{ mm}^2 A groove = A root + A bevel = 75.0 + 305.42 = 380.42 mm 2
Step 4: Calculate reinforcement cap area ( A cap A_{\text{cap}} A cap ) W cap = W + 2 Δ w = 29.56 + 2 ( 2.0 ) = 33.56 mm W_{\text{cap}} = W + 2 \Delta w = 29.56 + 2(2.0) = 33.56\text{ mm} W cap = W + 2Δ w = 29.56 + 2 ( 2.0 ) = 33.56 mm A cap = 2 3 W cap ⋅ h reinf = 2 3 ( 33.56 mm ) ⋅ ( 2.5 mm ) = 55.93 mm 2 A_{\text{cap}} = \frac{2}{3} W_{\text{cap}} \cdot h_{\text{reinf}} = \frac{2}{3} (33.56\text{ mm}) \cdot (2.5\text{ mm}) = 55.93\text{ mm}^2 A cap = 3 2 W cap ⋅ h reinf = 3 2 ( 33.56 mm ) ⋅ ( 2.5 mm ) = 55.93 mm 2
Step 5: Compute total weld cross-sectional area ( A total A_{\text{total}} A total ) A total = A groove + A cap = 380.42 + 55.93 = 436.35 mm 2 A_{\text{total}} = A_{\text{groove}} + A_{\text{cap}} = 380.42 + 55.93 = 436.35\text{ mm}^2 A total = A groove + A cap = 380.42 + 55.93 = 436.35 mm 2
Step 6: Compute total deposited weld metal volume ( V weld V_{\text{weld}} V weld ) and mass ( M dep M_{\text{dep}} M dep ) V weld = A total ⋅ L = 436.35 mm 2 ⋅ 12 , 000 mm = 5 , 236 , 200 mm 3 = 5.2362 × 10 − 3 m 3 V_{\text{weld}} = A_{\text{total}} \cdot L = 436.35\text{ mm}^2 \cdot 12,000\text{ mm} = 5,236,200\text{ mm}^3 = 5.2362 \times 10^{-3}\text{ m}^3 V weld = A total ⋅ L = 436.35 mm 2 ⋅ 12 , 000 mm = 5 , 236 , 200 mm 3 = 5.2362 × 1 0 − 3 m 3 M dep = V weld ⋅ ρ = 5 , 236 , 200 mm 3 ⋅ ( 7.85 × 10 − 6 kg/mm 3 ) = 41.104 kg M_{\text{dep}} = V_{\text{weld}} \cdot \rho = 5,236,200\text{ mm}^3 \cdot (7.85 \times 10^{-6}\text{ kg/mm}^3) = 41.104\text{ kg} M dep = V weld ⋅ ρ = 5 , 236 , 200 mm 3 ⋅ ( 7.85 × 1 0 − 6 kg/mm 3 ) = 41.104 kg
Step 7: Determine total consumable mass to purchase ( M purchased M_{\text{purchased}} M purchased ) M purchased = M dep η dep ⋅ ( 1 − L shop ) = 41.104 0.86 ⋅ ( 1 − 0.05 ) = 41.104 0.86 ⋅ 0.95 = 41.104 0.817 = 50.31 kg M_{\text{purchased}} = \frac{M_{\text{dep}}}{\eta_{\text{dep}} \cdot (1 - L_{\text{shop}})} = \frac{41.104}{0.86 \cdot (1 - 0.05)} = \frac{41.104}{0.86 \cdot 0.95} = \frac{41.104}{0.817} = 50.31\text{ kg} M purchased = η dep ⋅ ( 1 − L shop ) M dep = 0.86 ⋅ ( 1 − 0.05 ) 41.104 = 0.86 ⋅ 0.95 41.104 = 0.817 41.104 = 50.31 kg
- Real-World Engineering Scenarios & Exam Pitfalls
- Practical Industrial Scenario
On a heavy pressure vessel fabrication project conforming to ASME Section VIII, Division 1, the welding engineer discovered that fit-up crews opened the root gap of a 38 mm 38\text{ mm} 38 mm thick single-V joint from the specified R = 3 mm R = 3\text{ mm} R = 3 mm to an excessive R = 8 mm R = 8\text{ mm} R = 8 mm to compensate for edge mismatch. The engineer demonstrated through algebraic modeling that increasing the root opening by 5 mm 5\text{ mm} 5 mm added A = 5 mm × 38 mm = 190 mm 2 A = 5\text{ mm} \times 38\text{ mm} = 190\text{ mm}^2 A = 5 mm × 38 mm = 190 mm 2 of weld area across the entire 15 m 15\text{ m} 15 m circumferential seam. This represented an extra 22.4 kg 22.4\text{ kg} 22.4 kg of pure weld deposit, extending welding duration by 7.5 hours, tripling transverse residual shrinkage, and causing out-of-roundness rejection during hydrotest.
Common Exam Traps
Exam Trap 1: Included Groove Angle vs. Bevel Angle Examination problems frequently supply the "included groove angle" α = 60 ∘ \alpha = 60^\circ α = 6 0 ∘ . A common error is substituting 60 ∘ 60^\circ 6 0 ∘ directly into tan ( β ) \tan(\beta) tan ( β ) , which inflates the bevel width by a factor of tan ( 60 ∘ ) / tan ( 30 ∘ ) = 1.732 / 0.577 = 3.0 \tan(60^\circ)/\tan(30^\circ) = 1.732 / 0.577 = 3.0 tan ( 6 0 ∘ ) / tan ( 3 0 ∘ ) = 1.732/0.577 = 3.0 ! Always remember that for symmetrical joints, bevel angle β = α / 2 = 30 ∘ \beta = \alpha / 2 = 30^\circ β = α /2 = 3 0 ∘ .
Exam Trap 2: Neglecting the Root Face in Bevel Depth When computing the beveled triangle area, candidates often take the vertical leg as the full plate thickness t t t . The root face f f f must always be subtracted from t t t to determine the actual bevel depth d b = ( t − f ) d_b = (t - f) d b = ( t − f ) . On a 25 mm 25\text{ mm} 25 mm plate with a 3 mm 3\text{ mm} 3 mm root face, ignoring f f f introduces an error of over 25 % 25\% 25% in the calculated bevel area.
Exam Trap 3: Applying 0.707 to Unequal-Leg Fillets or Skewed Joints The 0.707 0.707 0.707 multiplier ( 1 / 2 1/\sqrt{2} 1/ 2 ) applies strictly to 90 ∘ 90^\circ 9 0 ∘ orthogonal joints with equal legs ( w 1 = w 2 w_1 = w_2 w 1 = w 2 ). For unequal legs, you must use t t = ( w 1 w 2 ) / w 1 2 + w 2 2 t_t = (w_1 w_2)/\sqrt{w_1^2 + w_2^2} t t = ( w 1 w 2 ) / w 1 2 + w 2 2 . For skewed joints with dihedral angle Ψ ≠ 90 ∘ \Psi \ne 90^\circ Ψ = 9 0 ∘ , applying 0.707 0.707 0.707 will lead to severe under-sizing on obtuse joints or non-conservative under-prediction of root gaps on acute joints.