Study guide

10.7 HAZ Hardness Traverses, Toughness Gradients & Peak-Temperature Control

AWS CWEng Certified Welding Engineer Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & CWEng Exam Overview

About the CWEng Exam: Four Parts, 163 Questions & Testing Logistics Scoring, Composite Weighting, Eligibility & Five-Year Renewal How to Use This Guide & Build Your Open-Book Reference Set

2 Chapter 1: Mathematics & Statistics for Welding Engineers

1.1 Engineering Mathematics: Algebra, Trigonometry & Geometry in Weldments 1.2 Differential & Integral Calculus Fundamentals in Engineering Analysis 1.3 Applied Engineering Statistics, Population Distributions & Quality Metrics 1.4 Polynomial Equations, Conic Sections & Complex Numbers

3 Chapter 2: Physics Fundamentals & Mechanics

2.1 Unit Systems, Dimensional Analysis & Engineering Conversions 2.2 Mechanics: Statics, Equilibrium, Force Vectors & Moments 2.3 Work, Energy, Power & Mechanical Advantage in Welding Systems 2.4 Thermal Physics, Linear/Volumetric Expansion & Heat Capacity

4 Chapter 3: General & Physical Chemistry for Welding

3.1 Atomic Structure, Bonding & Solid-Solution Thermodynamics 3.2 Hume-Rothery Compatibility, Interstitial Strain & HSLA Microalloy Scavenging 3.3 Gas Laws, Dalton Partial Pressures, Arc Dissociation & Sieverts Law 3.4 Cylinder Capacity, Available Arc Time & Gas-Related Porosity Diagnosis 3.5 Redox Thermodynamics, Deoxidation & Slag-Metal Refining 3.6 Basicity Index Calculations, Toughness Prediction & Cryogenic Consumable Selection

5 Chapter 4: Strength of Materials & Mechanics of Materials

4.1 Engineering vs. True Stress-Strain, Elastic Constants & Z-Direction Ductility 4.2 Plane Stress vs. Plane Strain, Triaxial Restraint & Alloy Property Comparison 4.3 Beam Bending, Transverse Shear, Torsion & Mohr Circle Construction 4.4 Multiaxial Yield Criteria & Combined-Load Analysis of Welded Members 4.5 Fatigue Life, Weld-Toe Stress Concentration & Paris-Erdogan Crack Growth 4.6 LEFM Fracture Toughness, Ductile-Brittle Transition & Larson-Miller Creep 4.7 Comparative Failure-Mode Synthesis & Integrated Flaw and Creep Assessment

6 Chapter 5: Heat Transfer & Fluid Mechanics in Welding

5.1 Fourier Conduction, Rosenthal Moving Heat Source & 2D vs. 3D Heat Flow 5.2 Adams Cooling Rate, the t8/5 Window & HAZ Peak-Temperature Distribution 5.3 Convection, Stefan-Boltzmann Radiation & Emissivity of Weld Surfaces 5.4 Arc Radiation Losses, Preheat Maintenance & PWHT Boundary Conditions 5.5 Fluid Statics, Bernoulli, Viscosity & Reynolds-Number Regimes 5.6 Gas Lens Mechanics, Buoyancy Effects & Torch Flow Design 5.7 Hyperbaric, Vacuum & Controlled-Atmosphere Welding Environments

7 Chapter 6: Electrical Engineering Principles for Welding Systems

6.1 DC and AC Waveforms, Polarity Thermodynamics & Welding Circuit Analysis 6.2 Joule Heating, Electrode Stickout Preheating & Circuit Voltage Distribution 6.3 Power Factor, Reactance, Impedance & Magnetic Transformer Principles 6.4 Lorentz Force, Electromagnetic Pinch Effect & Arc Blow

8 Chapter 7: Welding Heat Sources & Arc Physics

7.1 Volt-Ampere Characteristics, Operating Point, Self-Regulation & OCV Limits 7.2 Inductance, Slope Control & Dynamic Power-Source Response 7.3 Arc Fall Regions, Cathode Emission Mechanisms & Shielding-Gas Ionization 7.4 Maecker Plasma Jet, Degree of Ionization & Anode Heat Partitioning 7.5 Droplet Force Balance & Classification of Metal Transfer Regimes 7.6 Transition Current, Mode Comparison & Pulsed Waveform Design

9 Chapter 8: Arc Welding Processes & Parameter Controls

8.1 Shielded Metal Arc Welding (SMAW): Electrode Flux Chemistries & Variables 8.2 GMAW Process Physics, Transfer Modes & Shielding Gas Interactions 8.3 Solid, Metal-Cored & Flux-Cored Wires with CTWD and Parameter Envelopes 8.4 Gas Tungsten (GTAW) & Plasma Arc Welding (PAW): Electrodes & Keyholing 8.5 Submerged Arc Welding (SAW): Flux Basicity, Multi-Wire & High-Deposition Systems

10 Chapter 9: Advanced, Resistance & Solid-State Joining Processes

9.1 High-Energy-Density Beam Physics & Electron Beam Welding 9.2 Laser Beam Welding, EBW/LBW Comparison & Fiber Laser Parameter Derivation 9.3 Resistance Welding Physics, Electrode Materials & Spot Weld Sequence 9.4 Nugget Sizing, Seam and Projection Welding, and Lobe Curve Process Windows 9.5 Solid-State Joining: Friction Stir Welding (FSW), Explosion & Diffusion 9.6 Thermal Cutting & Gouging: Oxyfuel, Plasma Arc and Air Carbon Arc 9.7 High-Frequency, Flash, Stud & Ultrasonic Welding; Surfacing and Thermal Spray

11 Chapter 10: Physical & Transformation Metallurgy of Steels

10.1 Fe-Fe3C System, Crystal Lattices, c/a Ratio & Interstitial Solubility 10.2 Critical Temperatures, Invariant Reactions & the Lever Rule 10.3 Alloying Elements, the Gamma Loop & Phase-Fraction Calculations 10.4 TTT and CCT Diagrams, Constitutional Supercooling & Scheil Microsegregation 10.5 Non-Equilibrium Transformation Products & Martensite Modeling 10.6 HAZ Anatomy, Microstructural Sub-Zones & Multi-Pass Reheated Regions 10.7 HAZ Hardness Traverses, Toughness Gradients & Peak-Temperature Control

12 Chapter 11: Weldability, Cracking Mechanisms & Alloy Metallurgy

11.1 Hydrogen Cracking Conditions, Carbon Equivalent & Diffusible Hydrogen Control 11.2 Preheat, Interpass and Post-Heat Calculations for Cold-Crack Prevention 11.3 Solidification Cracking, Bead Aspect Ratio, Liquation & Lamellar Tearing 11.4 Lamellar Tearing Mitigation & Hot-Cracking Susceptibility Evaluation 11.5 Stainless Families, Schaeffler and WRC-1992 Diagrams, Ferrite Number & Sensitization 11.6 Duplex Stainless Metallurgy & Dissimilar-Metal Ferrite Prediction 11.7 Aluminum Oxide and Porosity Control, and Titanium Reactive-Metal Welding 11.8 Nickel Superalloys, Strain-Age Cracking & Guinier-Preston Aging Sequences

13 Chapter 12: Weldment Design, Stress Analysis & Joint Mechanics

12.1 AWS A2.4 Welding Symbol Anatomy, Symbol Library & Dimension Syntax 12.2 Joint Architecture, CJP versus PJP, and NDE Examination Symbols 12.3 Fillet and Groove Weld Sizing under Direct Stress in ASD and LRFD 12.4 Plug and Slot Welds, Stress Gradients & the Fillet Weld Break Test 12.5 Eccentric Loading Analysis: Elastic Vector Method vs Instantaneous Center 12.6 Fatigue Design of Welded Connections & Residual Stress/Distortion Control

14 Chapter 13: Non-Destructive Examination (NDE) & Discontinuity Analysis

13.1 Visual Testing Gages & Liquid Penetrant Capillary Mechanics 13.2 Magnetic Particle Testing: Flux Leakage, Field Geometry & Prod Amperage 13.3 Radiographic Physics, Geometric Unsharpness, Density & IQI Sensitivity 13.4 Computed and Digital Radiography & Radiographic Discontinuity Interpretation 13.5 Acoustic Wave Mechanics, Refraction & Angle-Beam Sound-Path Geometry 13.6 AWS D1.1 Decibel Rating, Phased Array & Time-of-Flight Diffraction

15 Chapter 14: Brazing, Soldering & Industrial Welding Safety

14.1 Brazing Thermodynamics, Capillary Wetting Physics & Joint Clearance 14.2 AWS A5.8 Brazing Filler Metals, FB Fluxes & Industrial Heating Processes 14.3 Soldering Fundamentals, Flux Chemistries & Intermetallic Formation 14.4 Hierarchy of Controls, Electric Shock Physics & Industrial Ventilation 14.5 Fume Exposure Limits, Arc Radiation, Hot Work and Confined-Space Entry 14.6 Arc-Generated Toxic Gases, Moving-Equipment Hazards & TWA Exposure Calculation

16 Chapter 15: Structural Fabrication & AWS D1.1 Code Implementation

15.1 AWS D1.1 Scope, Prequalification Limits, Base-Metal Groups & Matching Filler 15.2 Prequalified Joint Details, Backing Systems & Joint Specification Verification 15.3 Thermal Cut Edges, Fit-Up Tolerances & Minimum Preheat Requirements 15.4 Preheat Application Zones, Measurement Instrumentation & Fabrication Audits 15.5 PWHT Fundamentals, D1.1 Thermal Cycles & Visual Acceptance Criteria 15.6 D1.1 Nondestructive Examination Protocols, PWHT Scheduling & Visual Audit Practice

17 Chapter 16: Welding Procedure Qualification (WPS & PQR) per ASME IX & AWS B2.1

16.1 PQR versus WPS Hierarchy, Qualification Workflow & Standard Procedures 16.2 Manufacturer Responsibility, Subcontracting Limits & Multi-Process Qualification 16.3 Essential, Supplementary Essential and Nonessential Variables with Heat Input Mechanics 16.4 Waveform-Controlled Power Sources, Appendix H & Heat-Input Compliance 16.5 P-Numbers, Group Numbers, F-Numbers & A-Numbers 16.6 QW-451 Mechanical Test Protocols & Procedure Qualification Test Evaluation

18 Chapter 17: Filler Metal Specifications, Selection & Consumable Control

17.1 AWS A5 Architecture: SMAW, GMAW/GTAW and FCAW Consumable Classifications 17.2 SAW Wire-Flux Systems, Alloy Pickup & PWHT Property Effects 17.3 Stainless Filler Specifications, Solidification Modes & Dissimilar-Metal Joints 17.4 AWS A5.10 Aluminum Filler Selection & Dilution and Ferrite-Number Calculations 17.5 Consumable Storage, Conditioning Envelopes & Atmospheric Exposure Limits 17.6 Low-Hydrogen Designators, the Yurioka Parameter & Preheat Sizing

19 Chapter 18: Welder Performance Qualification, Quality Management & Welding Economics

18.1 Welder Qualification Philosophy, Test Positions & Thickness and Diameter Ranges 18.2 F-Number Hierarchy, Operator Qualification & Continuity Requirements 18.3 ISO 3834, Welding Coordination, Inspection Test Plans & Equipment Validation 18.4 EN 10204 Material Certification, Traceability & Heat-Input Nonconformance Auditing 18.5 Weld Cost Anatomy, Deposition Rates, Operating Factor & the Overwelding Law 18.6 Economic Optimization Strategies & Fabrication Cost Comparison

10.7 HAZ Hardness Traverses, Toughness Gradients & Peak-Temperature Control

Key Takeaways Explain This Topic AI

HAZ peak hardness and cracking susceptibility are governed by carbon equivalent (CE_IIW, P_cm) and cooling time Δt_8/5; industry codes mandate stringent hardness ceilings (e.g., 250 HV for NACE MR0175 sour service, 350 HV for AWS D1.1 structural fabrication) controlled via preheat and heat input management.

The intercritically reheated coarse-grained heat-affected zone is the classic local brittle zone and is where code impact specimens are notched in multi-pass welds.

A hardness traverse across a weld is the cheapest practical screen for excessive heat-affected zone hardness and for a cold-cracking risk.

Peak hardness usually occurs in the coarse-grained heat-affected zone rather than in the weld metal, because prior austenite grain size raises hardenability.

Controlling peak temperature and cooling rate through heat input, preheat and interpass temperature is the only practical way to manage heat-affected zone properties in the field.

Last updated: September 2026

Hardness Traverses & Fracture Toughness Gradients

Microhardness testing across a weld cross-section provides a direct mechanical fingerprint of the microstructural transformations. VICKERS HARDNESS PROFILE ACROSS WELDMENT

  • Hardness (HV10) ^
  • | CGHAZ Peak Hardness
  • | /\
  • | / \
  • 350 HV --+---------------------/----+----------------- AWS D1.1 HICC Limit
  • | /| |\
  • 250 HV --+-------------------/-+----+-\--------------- NACE MR0175 Sour Limit
  • | / | | \
  • Base HV -+-----------------' | | '------------ Base Metal Baseline
  • | FZ |CGHAZ|ICHAZ| FGHAZ| SCHAZ |
  • +------------------------------------------->
  • Distance from Weld Centerline
  • Industrial Hardness Ceilings

Industry fabrication codes mandate strict upper limits on HAZ peak hardness:

NACE MR0175 / ISO 15156 (Sour Oil & Gas Service): Maximum allowable HAZ hardness is 250 HV 250\text{ HV} 250 HV ( 22 HRC 22\text{ HRC} 22 HRC ). In wet sour environments containing hydrogen sulfide ( H 2 S \text{H}_2\text{S} H 2 ​ S ), atomic hydrogen entry triggers catastrophic Sulfide Stress Cracking (SSC) along hard martensitic boundaries if hardness exceeds 250 HV 250\text{ HV} 250 HV .

AWS D1.1 Structural Welding Code - Steel: Recommends limiting peak HAZ hardness to 350 HV 350\text{ HV} 350 HV (or 380 HV 380\text{ HV} 380 HV for high-strength grades) to prevent fabrication hydrogen-induced cold cracking (delayed underbead cracking).

Carbon Equivalent Formulations

Hardenability and cracking susceptibility are estimated via empirical carbon equivalent equations:

IIW Carbon Equivalent ( C E IIW CE_{\text{IIW}} C E IIW ​ ) — for conventional steels ( C > 0.18 % C > 0.18\% C > 0.18% ): C E IIW = C + Mn 6 + Cr + Mo + V 5 + Ni + Cu 15 CE_{\text{IIW}} = \text{C} + \frac{\text{Mn}}{6} + \frac{\text{Cr} + \text{Mo} + \text{V}}{5} + \frac{\text{Ni} + \text{Cu}}{15} C E IIW ​ = C + 6 Mn ​ + 5 Cr + Mo + V ​ + 15 Ni + Cu ​ Steels with C E IIW > 0.40 % CE_{\text{IIW}} > 0.40\% C E IIW ​ > 0.40% require preheating; steels with C E IIW > 0.45 % CE_{\text{IIW}} > 0.45\% C E IIW ​ > 0.45% are highly prone to HAZ martensite and require strict preheat and interpass controls.

Ito-Bessyo Cracking Parameter ( P c m P_{cm} P c m ​ ) — for modern low-carbon TMCP steels ( C < 0.16 % C < 0.16\% C < 0.16% ): P c m = C + Si 30 + Mn + Cu + Cr 20 + Ni 60 + Mo 15 + V 10 + 5 B P_{cm} = \text{C} + \frac{\text{Si}}{30} + \frac{\text{Mn} + \text{Cu} + \text{Cr}}{20} + \frac{\text{Ni}}{60} + \frac{\text{Mo}}{15} + \frac{\text{V}}{10} + 5\text{B} P c m ​ = C + 30 Si ​ + 20 Mn + Cu + Cr ​ + 60 Ni ​ + 15 Mo ​ + 10 V ​ + 5 B

Modeling HAZ Peak Temperature: The Rosenthal Equation

For two-dimensional heat conduction in a plate of thickness h h h (thin plate or full-penetration weld), Rosenthal's formulation relates peak temperature ( T p T_p T p ​ ) at lateral distance y y y from the weld fusion line to welding heat input: 1 T p − T 0 = 4.13 ⋅ ρ c p ⋅ h ⋅ y H net + 1 T m − T 0 \frac{1}{T_p - T_0} = \frac{4.13 \cdot \rho c_p \cdot h \cdot y}{H_{\text{net}}} + \frac{1}{T_m - T_0} T p ​ − T 0 ​ 1 ​ = H net ​ 4.13 ⋅ ρ c p ​ ⋅ h ⋅ y ​ + T m ​ − T 0 ​ 1 ​

where:

T 0 T_0 T 0 ​ : Workpiece initial preheat temperature ( ∘ C ^\circ\text{C} ∘ C ).

T m T_m T m ​ : Melting temperature of the steel (typically 1500 ∘ C 1500^\circ\text{C} 150 0 ∘ C ).

ρ c p \rho c_p ρ c p ​ : Volumetric heat capacity of steel ( ≈ 0.0044 J/mm 3 ⋅ ∘ C \approx 0.0044\text{ J/mm}^3\cdot^\circ\text{C} ≈ 0.0044 J/mm 3 ⋅ ∘ C ).

h h h : Plate thickness ( mm \text{mm} mm ).

y y y : Perpendicular distance from the fusion boundary ( mm \text{mm} mm ).

H net = η ⋅ V ⋅ I v H_{\text{net}} = \eta \cdot \frac{V \cdot I}{v} H net ​ = η ⋅ v V ⋅ I ​ : Net linear heat input ( J/mm \text{J/mm} J/mm ), with arc thermal efficiency η \eta η .

  • Comprehensive Worked Numerical Example: HAZ Peak Temperature & Hardness Control
  • Problem Statement

A welding engineer is preparing a Welding Procedure Specification (WPS) for joining 12.0 mm 12.0\text{ mm} 12.0 mm thick structural steel plate for a sour service pipeline manifold. The project is governed by NACE MR0175 , mandating that HAZ hardness must not exceed 250 HV 250\text{ HV} 250 HV .

Welding Parameters & Material Data:

Steel Composition: 0.12 % C 0.12\%\text{ C} 0.12% C , 1.30 % Mn 1.30\%\text{ Mn} 1.30% Mn , 0.25 % Si 0.25\%\text{ Si} 0.25% Si , 0.015 % P 0.015\%\text{ P} 0.015% P , 0.005 % S 0.005\%\text{ S} 0.005% S , 0.20 % Cr 0.20\%\text{ Cr} 0.20% Cr , 0.15 % Mo 0.15\%\text{ Mo} 0.15% Mo , 0.30 % Ni 0.30\%\text{ Ni} 0.30% Ni , 0.03 % V 0.03\%\text{ V} 0.03% V .

Melting Temperature: T m = 1500 ∘ C T_m = 1500^\circ\text{C} T m ​ = 150 0 ∘ C .

Transformation Temperatures: A c 3 = 880 ∘ C Ac_3 = 880^\circ\text{C} A c 3 ​ = 88 0 ∘ C , A c 1 = 727 ∘ C Ac_1 = 727^\circ\text{C} A c 1 ​ = 72 7 ∘ C . Coarse-grained boundary threshold: T coarsen = 1150 ∘ C T_{\text{coarsen}} = 1150^\circ\text{C} T coarsen ​ = 115 0 ∘ C .

Volumetric Heat Capacity: ρ c p = 0.0044 J/mm 3 ⋅ ∘ C \rho c_p = 0.0044\text{ J/mm}^3\cdot^\circ\text{C} ρ c p ​ = 0.0044 J/mm 3 ⋅ ∘ C .

Initial Preheat Temperature: T 0 = 20 ∘ C T_0 = 20^\circ\text{C} T 0 ​ = 2 0 ∘ C .

Welding Process: Mechanized GMAW, V = 28 V V = 28\text{ V} V = 28 V , I = 280 A I = 280\text{ A} I = 280 A , travel speed v = 5.0 mm/s v = 5.0\text{ mm/s} v = 5.0 mm/s , arc efficiency η = 0.80 \eta = 0.80 η = 0.80 .

Calculate:

The net linear heat input H net H_{\text{net}} H net ​ in J/mm \text{J/mm} J/mm and kJ/mm \text{kJ/mm} kJ/mm .

The peak temperatures ( T p T_p T p ​ ) at lateral distances of y = 1.2 mm y = 1.2\text{ mm} y = 1.2 mm and y = 3.5 mm y = 3.5\text{ mm} y = 3.5 mm from the fusion line, and identify which HAZ sub-zone each location represents.

The IIW Carbon Equivalent ( C E IIW CE_{\text{IIW}} C E IIW ​ ) of the base steel.

Evaluate compliance with NACE MR0175. If the fast cooling rate produces a CGHAZ hardness of 310 HV 310\text{ HV} 310 HV under T 0 = 20 ∘ C T_0 = 20^\circ\text{C} T 0 ​ = 2 0 ∘ C , determine the engineering remediation required to achieve ≤ 250 HV \le 250\text{ HV} ≤ 250 HV .

Step-by-Step Solution

Step 1: Calculate Net Linear Heat Input ( H net H_{\text{net}} H net ​ ) P arc = V ⋅ I = 28 V × 280 A = 7840 W = 7840 J/s P_{\text{arc}} = V \cdot I = 28\text{ V} \times 280\text{ A} = 7840\text{ W} = 7840\text{ J/s} P arc ​ = V ⋅ I = 28 V × 280 A = 7840 W = 7840 J/s H gross = P arc v = 7840 J/s 5.0 mm/s = 1568 J/mm = 1.568 kJ/mm H_{\text{gross}} = \frac{P_{\text{arc}}}{v} = \frac{7840\text{ J/s}}{5.0\text{ mm/s}} = 1568\text{ J/mm} = 1.568\text{ kJ/mm} H gross ​ = v P arc ​ ​ = 5.0 mm/s 7840 J/s ​ = 1568 J/mm = 1.568 kJ/mm H net = η ⋅ H gross = 0.80 × 1568 J/mm = 1254.4 J/mm = 1.254 kJ/mm H_{\text{net}} = \eta \cdot H_{\text{gross}} = 0.80 \times 1568\text{ J/mm} = 1254.4\text{ J/mm} = 1.254\text{ kJ/mm} H net ​ = η ⋅ H gross ​ = 0.80 × 1568 J/mm = 1254.4 J/mm = 1.254 kJ/mm

Step 2: Calculate Peak Temperatures ( T p T_p T p ​ ) via Rosenthal 2D Equation The 2D Rosenthal peak temperature relation is: 1 T p − T 0 = 4.13 ⋅ ρ c p ⋅ h ⋅ y H net + 1 T m − T 0 \frac{1}{T_p - T_0} = \frac{4.13 \cdot \rho c_p \cdot h \cdot y}{H_{\text{net}}} + \frac{1}{T_m - T_0} T p ​ − T 0 ​ 1 ​ = H net ​ 4.13 ⋅ ρ c p ​ ⋅ h ⋅ y ​ + T m ​ − T 0 ​ 1 ​

Calculate common thermal constant terms ( T 0 = 20 ∘ C T_0 = 20^\circ\text{C} T 0 ​ = 2 0 ∘ C , T m = 1500 ∘ C T_m = 1500^\circ\text{C} T m ​ = 150 0 ∘ C ): 1 T m − T 0 = 1 1500 − 20 = 1 1480 = 6.7568 × 10 − 4 ∘ C − 1 \frac{1}{T_m - T_0} = \frac{1}{1500 - 20} = \frac{1}{1480} = 6.7568 \times 10^{-4}\ ^\circ\text{C}^{-1} T m ​ − T 0 ​ 1 ​ = 1500 − 20 1 ​ = 1480 1 ​ = 6.7568 × 1 0 − 4 ∘ C − 1 Slope Factor S = 4.13 ⋅ ρ c p ⋅ h H net = 4.13 × 0.0044 J/mm 3 ⋅ ∘ C × 12.0 mm 1254.4 J/mm = 0.218064 1254.4 = 1.7384 × 10 − 4 ∘ C − 1 mm − 1 \text{Slope Factor } S = \frac{4.13 \cdot \rho c_p \cdot h}{H_{\text{net}}} = \frac{4.13 \times 0.0044\text{ J/mm}^3\cdot^\circ\text{C} \times 12.0\text{ mm}}{1254.4\text{ J/mm}} = \frac{0.218064}{1254.4} = 1.7384 \times 10^{-4}\ ^\circ\text{C}^{-1}\text{mm}^{-1} Slope Factor S = H net ​ 4.13 ⋅ ρ c p ​ ⋅ h ​ = 1254.4 J/mm 4.13 × 0.0044 J/mm 3 ⋅ ∘ C × 12.0 mm ​ = 1254.4 0.218064 ​ = 1.7384 × 1 0 − 4 ∘ C − 1 mm − 1

At Distance y = 1.2 mm y = 1.2\text{ mm} y = 1.2 mm : 1 T p − 20 = ( 1.7384 × 10 − 4 × 1.2 ) + 6.7568 × 10 − 4 = 2.0861 × 10 − 4 + 6.7568 × 10 − 4 = 8.8429 × 10 − 4 ∘ C − 1 \frac{1}{T_p - 20} = (1.7384 \times 10^{-4} \times 1.2) + 6.7568 \times 10^{-4} = 2.0861 \times 10^{-4} + 6.7568 \times 10^{-4} = 8.8429 \times 10^{-4}\ ^\circ\text{C}^{-1} T p ​ − 20 1 ​ = ( 1.7384 × 1 0 − 4 × 1.2 ) + 6.7568 × 1 0 − 4 = 2.0861 × 1 0 − 4 + 6.7568 × 1 0 − 4 = 8.8429 × 1 0 − 4 ∘ C − 1 T p − 20 = 1 8.8429 × 10 − 4 = 1130.85 ∘ C ⟹ T p = 1150.85 ∘ C ≈ 1151 ∘ C T_p - 20 = \frac{1}{8.8429 \times 10^{-4}} = 1130.85^\circ\text{C} \implies T_p = 1150.85^\circ\text{C} \approx 1151^\circ\text{C} T p ​ − 20 = 8.8429 × 1 0 − 4 1 ​ = 1130.8 5 ∘ C ⟹ T p ​ = 1150.8 5 ∘ C ≈ 115 1 ∘ C

Sub-Zone Classification: Because T p ≥ 1150 ∘ C T_p \ge 1150^\circ\text{C} T p ​ ≥ 115 0 ∘ C , this location lies at the boundary of the Coarse-Grained HAZ (CGHAZ) , where grain-boundary precipitates dissolve and rapid austenite grain coarsening occurs.

At Distance y = 3.5 mm y = 3.5\text{ mm} y = 3.5 mm : 1 T p − 20 = ( 1.7384 × 10 − 4 × 3.5 ) + 6.7568 × 10 − 4 = 6.0844 × 10 − 4 + 6.7568 × 10 − 4 = 1.2841 × 10 − 3 ∘ C − 1 \frac{1}{T_p - 20} = (1.7384 \times 10^{-4} \times 3.5) + 6.7568 \times 10^{-4} = 6.0844 \times 10^{-4} + 6.7568 \times 10^{-4} = 1.2841 \times 10^{-3}\ ^\circ\text{C}^{-1} T p ​ − 20 1 ​ = ( 1.7384 × 1 0 − 4 × 3.5 ) + 6.7568 × 1 0 − 4 = 6.0844 × 1 0 − 4 + 6.7568 × 1 0 − 4 = 1.2841 × 1 0 − 3 ∘ C − 1 T p − 20 = 1 1.2841 × 10 − 3 = 778.74 ∘ C ⟹ T p = 798.74 ∘ C ≈ 799 ∘ C T_p - 20 = \frac{1}{1.2841 \times 10^{-3}} = 778.74^\circ\text{C} \implies T_p = 798.74^\circ\text{C} \approx 799^\circ\text{C} T p ​ − 20 = 1.2841 × 1 0 − 3 1 ​ = 778.7 4 ∘ C ⟹ T p ​ = 798.7 4 ∘ C ≈ 79 9 ∘ C

Sub-Zone Classification: Because A c 1 ( 727 ∘ C ) < T p < A c 3 ( 880 ∘ C ) Ac_1 (727^\circ\text{C}) < T_p < Ac_3 (880^\circ\text{C}) A c 1 ​ ( 72 7 ∘ C ) < T p ​ < A c 3 ​ ( 88 0 ∘ C ) , this location lies directly within the Intercritical HAZ (ICHAZ) , undergoing partial austenitization with intense carbon partitioning into isolated austenite pools that form brittle M-A constituent upon cooling.

Step 3: Calculate Carbon Equivalent ( C E IIW CE_{\text{IIW}} C E IIW ​ ) C E IIW = C + Mn 6 + Cr + Mo + V 5 + Ni + Cu 15 CE_{\text{IIW}} = \text{C} + \frac{\text{Mn}}{6} + \frac{\text{Cr} + \text{Mo} + \text{V}}{5} + \frac{\text{Ni} + \text{Cu}}{15} C E IIW ​ = C + 6 Mn ​ + 5 Cr + Mo + V ​ + 15 Ni + Cu ​

Substitute alloy percentages: C E IIW = 0.12 + 1.30 6 + 0.20 + 0.15 + 0.03 5 + 0.30 + 0 15 CE_{\text{IIW}} = 0.12 + \frac{1.30}{6} + \frac{0.20 + 0.15 + 0.03}{5} + \frac{0.30 + 0}{15} C E IIW ​ = 0.12 + 6 1.30 ​ + 5 0.20 + 0.15 + 0.03 ​ + 15 0.30 + 0 ​ C E IIW = 0.12 + 0.2167 + 0.0760 + 0.0200 = 0.4327 ⟹ 0.43 % CE_{\text{IIW}} = 0.12 + 0.2167 + 0.0760 + 0.0200 = 0.4327 \implies 0.43\% C E IIW ​ = 0.12 + 0.2167 + 0.0760 + 0.0200 = 0.4327 ⟹ 0.43%

Step 4: Evaluate Compliance and Formulate Engineering Remediation

Compliance Assessment: With C E IIW = 0.43 % CE_{\text{IIW}} = 0.43\% C E IIW ​ = 0.43% and an unheated plate ( T 0 = 20 ∘ C T_0 = 20^\circ\text{C} T 0 ​ = 2 0 ∘ C ), the fast cooling rate yields a CGHAZ hardness of 310 HV 310\text{ HV} 310 HV , substantially violating the NACE MR0175 ceiling of 250 HV 250\text{ HV} 250 HV (non-conformance for sour service).

Engineering Remediation: To retard the cooling rate (extend Δ t 8 / 5 \Delta t_{8/5} Δ t 8/5 ​ ) and allow austenite to transform into softer ferrite-pearlite/bainite rather than hard lath martensite:

Apply Preheat: Introduce a minimum preheat of T 0 = 150 ∘ C T_0 = 150^\circ\text{C} T 0 ​ = 15 0 ∘ C to 175 ∘ C 175^\circ\text{C} 17 5 ∘ C per EN 1011-2 / AWS D1.1 Annex H. This reduces thermal conductivity drain, extending Δ t 8 / 5 \Delta t_{8/5} Δ t 8/5 ​ above 15 − 20 s 15-20\text{ s} 15 − 20 s and dropping CGHAZ peak hardness below 250 HV 250\text{ HV} 250 HV .

Post-Weld Heat Treatment (PWHT): If preheat alone is insufficient, specify furnace PWHT at 600 ∘ C ± 15 ∘ C 600^\circ\text{C} \pm 15^\circ\text{C} 60 0 ∘ C ± 1 5 ∘ C for 1 hour 1\text{ hour} 1 hour per inch of thickness to temper martensite and reduce residual stresses.

  • Real-World Engineering Scenarios & Exam Pitfalls
  • Industrial Case: Brittle Fracture in Offshore Riser Flange Welds (ICCGHAZ Failure)

During fabrication qualification testing of heavy-wall ( 50 mm 50\text{ mm} 50 mm ) forged high-strength steel riser flanges for an offshore platform, the welding procedure underwent full-scale Crack Tip Opening Displacement (CTOD) testing at − 10 ∘ C -10^\circ\text{C} − 1 0 ∘ C per BS 7448. While weld metal and fine-grained HAZ specimens achieved outstanding CTOD values ( > 0.95 mm >0.95\text{ mm} > 0.95 mm ), three consecutive specimens notched precisely into the HAZ failed catastrophically via brittle pop-ins at CTOD values of δ = 0.032 mm \delta = 0.032\text{ mm} δ = 0.032 mm , failing the project threshold of δ crit ≥ 0.25 mm \delta_{\text{crit}} \ge 0.25\text{ mm} δ crit ​ ≥ 0.25 mm .

Metallographic Sectioning: Metallographic examination of the fracture surfaces revealed that the fatigue pre-crack had intersected the Intercritically Reheated Coarse-Grained HAZ (ICCGHAZ) over 18 % 18\% 18% of the specimen thickness. High-resolution field-emission SEM revealed continuous necklaces of high-carbon Martensite-Austenite (M-A) constituent along the prior austenite grain boundaries ( > 150 μ m >150\ \mu\text{m} > 150 μ m grain diameter). Micro-cleavage cracks had initiated at the brittle M-A/ferrite boundary interfaces under high triaxial crack-tip constraint, propagating dynamically across the coarse grain facets without plastic deformation.

Engineering Remediation:

Implemented a strict Temper Bead Welding (TBW) protocol: layer 2 heat input was increased by 30 % 30\% 30% relative to layer 1, and bead overlap was fixed at 55 % 55\% 55% , ensuring that the second pass thermally cycled the prior CGHAZ into the normalizing range ( 950 − 1050 ∘ C 950-1050^\circ\text{C} 950 − 105 0 ∘ C FG-CGHAZ), completely grain-refining the coarse prior structure.

Reduced maximum interpass temperature from 250 ∘ C 250^\circ\text{C} 25 0 ∘ C to 175 ∘ C 175^\circ\text{C} 17 5 ∘ C to accelerate cooling through the intercritical transformation window, minimizing the volume fraction and necklace connectivity of M-A islands.

Re-qualification CTOD tests exceeded 0.65 mm 0.65\text{ mm} 0.65 mm across all valid test specimens.

Common Exam Traps

Exam Trap 1: Confusing Single-Pass ICHAZ with Multi-Pass ICCGHAZ Certification exam questions often probe candidate understanding of Local Brittle Zones (LBZs). While the single-pass ICHAZ contains brittle M-A constituent, its base metal grain size is small (fine ferrite), limiting the cleavage crack facet size. The ICCGHAZ (Intercritically Reheated CGHAZ) is vastly more dangerous because M-A constituent necklaces precipitate along giant prior austenite grain boundaries (ASTM 1–3). This provides huge, continuous cleavage planes, creating the lowest fracture toughness in any steel weldment.

Exam Trap 2: Assuming the Fine-Grained HAZ (FGHAZ) Has Low Toughness Questions frequently ask which HAZ region has the lowest toughness, presenting FGHAZ, CGHAZ, ICHAZ, and SCHAZ as options. Candidates often incorrectly guess the FGHAZ because it is adjacent to the coarse zone. The FGHAZ actually possesses the highest toughness and ductility of all HAZ regions because the peak temperature ( A c 3 Ac_3 A c 3 ​ to 1100 ∘ C 1100^\circ\text{C} 110 0 ∘ C ) achieves complete grain refinement into ultra-fine equiaxed grains.

Exam Trap 3: Believing Post-Weld Heat Treatment (PWHT) Always Restores Toughness to ICCGHAZ In conventional C-Mn steels, PWHT tempers martensite and improves toughness. However, in steels containing microalloying additions of vanadium, niobium, or titanium, subcritical PWHT at 580 − 620 ∘ C 580-620^\circ\text{C} 580 − 62 0 ∘ C can trigger secondary precipitation of ultra-fine coherent carbonitrides (e.g., V 4 C 3 \text{V}_4\text{C}_3 V 4 ​ C 3 ​ ) in the coarse grains, causing reheat embrittlement and further degrading CTOD toughness rather than improving it.