Study guide

12.3 Fillet and Groove Weld Sizing under Direct Stress in ASD and LRFD

AWS CWEng Certified Welding Engineer Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & CWEng Exam Overview

About the CWEng Exam: Four Parts, 163 Questions & Testing Logistics Scoring, Composite Weighting, Eligibility & Five-Year Renewal How to Use This Guide & Build Your Open-Book Reference Set

2 Chapter 1: Mathematics & Statistics for Welding Engineers

1.1 Engineering Mathematics: Algebra, Trigonometry & Geometry in Weldments 1.2 Differential & Integral Calculus Fundamentals in Engineering Analysis 1.3 Applied Engineering Statistics, Population Distributions & Quality Metrics 1.4 Polynomial Equations, Conic Sections & Complex Numbers

3 Chapter 2: Physics Fundamentals & Mechanics

2.1 Unit Systems, Dimensional Analysis & Engineering Conversions 2.2 Mechanics: Statics, Equilibrium, Force Vectors & Moments 2.3 Work, Energy, Power & Mechanical Advantage in Welding Systems 2.4 Thermal Physics, Linear/Volumetric Expansion & Heat Capacity

4 Chapter 3: General & Physical Chemistry for Welding

3.1 Atomic Structure, Bonding & Solid-Solution Thermodynamics 3.2 Hume-Rothery Compatibility, Interstitial Strain & HSLA Microalloy Scavenging 3.3 Gas Laws, Dalton Partial Pressures, Arc Dissociation & Sieverts Law 3.4 Cylinder Capacity, Available Arc Time & Gas-Related Porosity Diagnosis 3.5 Redox Thermodynamics, Deoxidation & Slag-Metal Refining 3.6 Basicity Index Calculations, Toughness Prediction & Cryogenic Consumable Selection

5 Chapter 4: Strength of Materials & Mechanics of Materials

4.1 Engineering vs. True Stress-Strain, Elastic Constants & Z-Direction Ductility 4.2 Plane Stress vs. Plane Strain, Triaxial Restraint & Alloy Property Comparison 4.3 Beam Bending, Transverse Shear, Torsion & Mohr Circle Construction 4.4 Multiaxial Yield Criteria & Combined-Load Analysis of Welded Members 4.5 Fatigue Life, Weld-Toe Stress Concentration & Paris-Erdogan Crack Growth 4.6 LEFM Fracture Toughness, Ductile-Brittle Transition & Larson-Miller Creep 4.7 Comparative Failure-Mode Synthesis & Integrated Flaw and Creep Assessment

6 Chapter 5: Heat Transfer & Fluid Mechanics in Welding

5.1 Fourier Conduction, Rosenthal Moving Heat Source & 2D vs. 3D Heat Flow 5.2 Adams Cooling Rate, the t8/5 Window & HAZ Peak-Temperature Distribution 5.3 Convection, Stefan-Boltzmann Radiation & Emissivity of Weld Surfaces 5.4 Arc Radiation Losses, Preheat Maintenance & PWHT Boundary Conditions 5.5 Fluid Statics, Bernoulli, Viscosity & Reynolds-Number Regimes 5.6 Gas Lens Mechanics, Buoyancy Effects & Torch Flow Design 5.7 Hyperbaric, Vacuum & Controlled-Atmosphere Welding Environments

7 Chapter 6: Electrical Engineering Principles for Welding Systems

6.1 DC and AC Waveforms, Polarity Thermodynamics & Welding Circuit Analysis 6.2 Joule Heating, Electrode Stickout Preheating & Circuit Voltage Distribution 6.3 Power Factor, Reactance, Impedance & Magnetic Transformer Principles 6.4 Lorentz Force, Electromagnetic Pinch Effect & Arc Blow

8 Chapter 7: Welding Heat Sources & Arc Physics

7.1 Volt-Ampere Characteristics, Operating Point, Self-Regulation & OCV Limits 7.2 Inductance, Slope Control & Dynamic Power-Source Response 7.3 Arc Fall Regions, Cathode Emission Mechanisms & Shielding-Gas Ionization 7.4 Maecker Plasma Jet, Degree of Ionization & Anode Heat Partitioning 7.5 Droplet Force Balance & Classification of Metal Transfer Regimes 7.6 Transition Current, Mode Comparison & Pulsed Waveform Design

9 Chapter 8: Arc Welding Processes & Parameter Controls

8.1 Shielded Metal Arc Welding (SMAW): Electrode Flux Chemistries & Variables 8.2 GMAW Process Physics, Transfer Modes & Shielding Gas Interactions 8.3 Solid, Metal-Cored & Flux-Cored Wires with CTWD and Parameter Envelopes 8.4 Gas Tungsten (GTAW) & Plasma Arc Welding (PAW): Electrodes & Keyholing 8.5 Submerged Arc Welding (SAW): Flux Basicity, Multi-Wire & High-Deposition Systems

10 Chapter 9: Advanced, Resistance & Solid-State Joining Processes

9.1 High-Energy-Density Beam Physics & Electron Beam Welding 9.2 Laser Beam Welding, EBW/LBW Comparison & Fiber Laser Parameter Derivation 9.3 Resistance Welding Physics, Electrode Materials & Spot Weld Sequence 9.4 Nugget Sizing, Seam and Projection Welding, and Lobe Curve Process Windows 9.5 Solid-State Joining: Friction Stir Welding (FSW), Explosion & Diffusion 9.6 Thermal Cutting & Gouging: Oxyfuel, Plasma Arc and Air Carbon Arc 9.7 High-Frequency, Flash, Stud & Ultrasonic Welding; Surfacing and Thermal Spray

11 Chapter 10: Physical & Transformation Metallurgy of Steels

10.1 Fe-Fe3C System, Crystal Lattices, c/a Ratio & Interstitial Solubility 10.2 Critical Temperatures, Invariant Reactions & the Lever Rule 10.3 Alloying Elements, the Gamma Loop & Phase-Fraction Calculations 10.4 TTT and CCT Diagrams, Constitutional Supercooling & Scheil Microsegregation 10.5 Non-Equilibrium Transformation Products & Martensite Modeling 10.6 HAZ Anatomy, Microstructural Sub-Zones & Multi-Pass Reheated Regions 10.7 HAZ Hardness Traverses, Toughness Gradients & Peak-Temperature Control

12 Chapter 11: Weldability, Cracking Mechanisms & Alloy Metallurgy

11.1 Hydrogen Cracking Conditions, Carbon Equivalent & Diffusible Hydrogen Control 11.2 Preheat, Interpass and Post-Heat Calculations for Cold-Crack Prevention 11.3 Solidification Cracking, Bead Aspect Ratio, Liquation & Lamellar Tearing 11.4 Lamellar Tearing Mitigation & Hot-Cracking Susceptibility Evaluation 11.5 Stainless Families, Schaeffler and WRC-1992 Diagrams, Ferrite Number & Sensitization 11.6 Duplex Stainless Metallurgy & Dissimilar-Metal Ferrite Prediction 11.7 Aluminum Oxide and Porosity Control, and Titanium Reactive-Metal Welding 11.8 Nickel Superalloys, Strain-Age Cracking & Guinier-Preston Aging Sequences

13 Chapter 12: Weldment Design, Stress Analysis & Joint Mechanics

12.1 AWS A2.4 Welding Symbol Anatomy, Symbol Library & Dimension Syntax 12.2 Joint Architecture, CJP versus PJP, and NDE Examination Symbols 12.3 Fillet and Groove Weld Sizing under Direct Stress in ASD and LRFD 12.4 Plug and Slot Welds, Stress Gradients & the Fillet Weld Break Test 12.5 Eccentric Loading Analysis: Elastic Vector Method vs Instantaneous Center 12.6 Fatigue Design of Welded Connections & Residual Stress/Distortion Control

14 Chapter 13: Non-Destructive Examination (NDE) & Discontinuity Analysis

13.1 Visual Testing Gages & Liquid Penetrant Capillary Mechanics 13.2 Magnetic Particle Testing: Flux Leakage, Field Geometry & Prod Amperage 13.3 Radiographic Physics, Geometric Unsharpness, Density & IQI Sensitivity 13.4 Computed and Digital Radiography & Radiographic Discontinuity Interpretation 13.5 Acoustic Wave Mechanics, Refraction & Angle-Beam Sound-Path Geometry 13.6 AWS D1.1 Decibel Rating, Phased Array & Time-of-Flight Diffraction

15 Chapter 14: Brazing, Soldering & Industrial Welding Safety

14.1 Brazing Thermodynamics, Capillary Wetting Physics & Joint Clearance 14.2 AWS A5.8 Brazing Filler Metals, FB Fluxes & Industrial Heating Processes 14.3 Soldering Fundamentals, Flux Chemistries & Intermetallic Formation 14.4 Hierarchy of Controls, Electric Shock Physics & Industrial Ventilation 14.5 Fume Exposure Limits, Arc Radiation, Hot Work and Confined-Space Entry 14.6 Arc-Generated Toxic Gases, Moving-Equipment Hazards & TWA Exposure Calculation

16 Chapter 15: Structural Fabrication & AWS D1.1 Code Implementation

15.1 AWS D1.1 Scope, Prequalification Limits, Base-Metal Groups & Matching Filler 15.2 Prequalified Joint Details, Backing Systems & Joint Specification Verification 15.3 Thermal Cut Edges, Fit-Up Tolerances & Minimum Preheat Requirements 15.4 Preheat Application Zones, Measurement Instrumentation & Fabrication Audits 15.5 PWHT Fundamentals, D1.1 Thermal Cycles & Visual Acceptance Criteria 15.6 D1.1 Nondestructive Examination Protocols, PWHT Scheduling & Visual Audit Practice

17 Chapter 16: Welding Procedure Qualification (WPS & PQR) per ASME IX & AWS B2.1

16.1 PQR versus WPS Hierarchy, Qualification Workflow & Standard Procedures 16.2 Manufacturer Responsibility, Subcontracting Limits & Multi-Process Qualification 16.3 Essential, Supplementary Essential and Nonessential Variables with Heat Input Mechanics 16.4 Waveform-Controlled Power Sources, Appendix H & Heat-Input Compliance 16.5 P-Numbers, Group Numbers, F-Numbers & A-Numbers 16.6 QW-451 Mechanical Test Protocols & Procedure Qualification Test Evaluation

18 Chapter 17: Filler Metal Specifications, Selection & Consumable Control

17.1 AWS A5 Architecture: SMAW, GMAW/GTAW and FCAW Consumable Classifications 17.2 SAW Wire-Flux Systems, Alloy Pickup & PWHT Property Effects 17.3 Stainless Filler Specifications, Solidification Modes & Dissimilar-Metal Joints 17.4 AWS A5.10 Aluminum Filler Selection & Dilution and Ferrite-Number Calculations 17.5 Consumable Storage, Conditioning Envelopes & Atmospheric Exposure Limits 17.6 Low-Hydrogen Designators, the Yurioka Parameter & Preheat Sizing

19 Chapter 18: Welder Performance Qualification, Quality Management & Welding Economics

18.1 Welder Qualification Philosophy, Test Positions & Thickness and Diameter Ranges 18.2 F-Number Hierarchy, Operator Qualification & Continuity Requirements 18.3 ISO 3834, Welding Coordination, Inspection Test Plans & Equipment Validation 18.4 EN 10204 Material Certification, Traceability & Heat-Input Nonconformance Auditing 18.5 Weld Cost Anatomy, Deposition Rates, Operating Factor & the Overwelding Law 18.6 Economic Optimization Strategies & Fabrication Cost Comparison

12.3 Fillet and Groove Weld Sizing under Direct Stress in ASD and LRFD

Key Takeaways Explain This Topic AI

In structural steel design per AWS D1.1 and AISC 360, fillet welds are assumed to fail in pure shear across the effective throat plane (te = 0.707 w for equal-leg 90° fillets), irrespective of the applied load angle.

AISC 360 Section J2.4 allows an empirical directional factor of [1.0 + 0.50 sin^1.5(θ)], granting a 50% strength increase for pure transverse fillet welds (θ = 90°) compared to longitudinal welds (θ = 0°), but at the cost of lower deformation capacity.

Under LRFD, fillet weld design shear strength is φRn = 0.75(0.60 F_EXX) te L = 0.45 F_EXX te L; under ASD, the allowable shear capacity is Rn / Ω = (0.60 F_EXX / 2.00) te L = 0.30 F_EXX te L (yielding 21 ksi for E70 filler metal).

Complete Joint Penetration (CJP) groove welds subject to direct tension or compression normal to the effective area have an allowable stress equal to the base metal allowable stress, provided matching weld metal is utilized.

Partial Joint Penetration (PJP) groove welds have an effective throat E equal to the depth of preparation S for groove angles ≥ 60°, but require a 3 mm (1/8 in) deduction for SMAW and FCAW-S when the included bevel angle is 45° due to root bridging.

Last updated: September 2026

12.2 Static Sizing of Fillet, Groove & Plug Welds under Direct Stress

Quick Answer: Under AISC 360 and AWS D1.1, fillet welds are designed assuming failure occurs by pure shear across the effective throat ( t e = 0.7071 w t_e = 0.7071 w t e ​ = 0.7071 w for 90 ∘ 90^\circ 9 0 ∘ equal-leg fillets). In Load and Resistance Factor Design (LRFD), the design shear strength is ϕ R n = ϕ ( 0.60 F E X X ) t e L \phi R_n = \phi (0.60 F_{EXX}) t_e L ϕ R n ​ = ϕ ( 0.60 F EXX ​ ) t e ​ L with ϕ = 0.75 \phi = 0.75 ϕ = 0.75 . In Allowable Stress Design (ASD), the allowable strength is R n / Ω = ( 0.60 F E X X / 2.00 ) t e L = 0.30 F E X X t e L R_n / \Omega = (0.60 F_{EXX} / 2.00) t_e L = 0.30 F_{EXX} t_e L R n ​ /Ω = ( 0.60 F EXX ​ /2.00 ) t e ​ L = 0.30 F EXX ​ t e ​ L (which equals 21.0 ksi 21.0\text{ ksi} 21.0 ksi or 144.8 MPa 144.8\text{ MPa} 144.8 MPa for an E70 electrode). When a fillet weld is loaded transversely ( θ = 90 ∘ \theta = 90^\circ θ = 9 0 ∘ ), an empirical directional multiplier [ 1.0 + 0.50 sin ⁡ 1.5 ( θ ) ] [1.0 + 0.50 \sin^{1.5}(\theta)] [ 1.0 + 0.50 sin 1.5 ( θ )] boosts capacity by 50 % 50\% 50% . CJP groove welds share the allowable stress of the parent metal, while PJP groove welds require a 3 mm 3\text{ mm} 3 mm ( 1 / 8 in 1/8\text{ in} 1/8 in ) throat deduction when welded at 45 ∘ 45^\circ 4 5 ∘ with SMAW.

Fillet Weld Mechanics and Geometric Throat Definitions

A fillet weld joins two intersecting surfaces at approximately 90 ∘ 90^\circ 9 0 ∘ (or skewed dihedral angles) by depositing a bead of triangular cross-section. Sizing is governed by the geometry of the largest inscribed right triangle. |\

  • | \ Convexity (C)
  • | \---_
  • | \ `\
  • | \ \
  • Leg (w) | t_e \ | Actual Face
  • | \ /
  • | \/
  • +--------+-----------------
  • w
  • |<----->| Leg Length (w)
  • Mathematical Throat Definitions

Leg Length ( w w w ): The distance from the joint root to the toe of the fillet weld along the fusion face.

Theoretical Throat ( t t t_t t t ​ ): The perpendicular distance from the joint root to the hypotenuse of the largest right triangle that can be inscribed inside the fillet weld cross-section. For an orthogonal 90 ∘ 90^\circ 9 0 ∘ joint with equal legs ( w 1 = w 2 = w w_1 = w_2 = w w 1 ​ = w 2 ​ = w ): t t = w ⋅ cos ⁡ ( 45 ∘ ) = w ⋅ sin ⁡ ( 45 ∘ ) = w 2 ≈ 0.7071 w t_t = w \cdot \cos(45^\circ) = w \cdot \sin(45^\circ) = \frac{w}{\sqrt{2}} \approx 0.7071 w t t ​ = w ⋅ cos ( 4 5 ∘ ) = w ⋅ sin ( 4 5 ∘ ) = 2 ​ w ​ ≈ 0.7071 w For an unequal-leg fillet weld ( w 1 ≠ w 2 w_1 \ne w_2 w 1 ​  = w 2 ​ ): t t = w 1 ⋅ w 2 w 1 2 + w 2 2 t_t = \frac{w_1 \cdot w_2}{\sqrt{w_1^2 + w_2^2}} t t ​ = w 1 2 ​ + w 2 2 ​ ​ w 1 ​ ⋅ w 2 ​ ​

Effective Throat ( t e t_e t e ​ ): The minimum distance from the joint root to the weld face, minus any convexity. Under standard processes (SMAW, GMAW, FCAW), t e = t t = 0.7071 w t_e = t_t = 0.7071 w t e ​ = t t ​ = 0.7071 w .

Deep Penetration Credit (Submerged Arc Welding): Because Submerged Arc Welding (SAW) utilizes high current densities with deep plasma gouging, AWS D1.1 Clause 4.4.2 permits deep penetration credit:

For leg size w ≤ 9.5 mm w \le 9.5\text{ mm} w ≤ 9.5 mm ( 3 / 8 in 3/8\text{ in} 3/8 in ): t e = w t_e = w t e ​ = w .

For leg size w > 9.5 mm w > 9.5\text{ mm} w > 9.5 mm : t e = 0.7071 w + 2.8 mm t_e = 0.7071 w + 2.8\text{ mm} t e ​ = 0.7071 w + 2.8 mm ( 0.11 in 0.11\text{ in} 0.11 in ).

Actual Throat ( t a t_a t a ​ ): The shortest distance from the joint root to the actual exterior face of the weld: t a = t t + C t_a = t_t + C t a ​ = t t ​ + C , where C C C is surface convexity.

Convexity Limits (AWS D1.1 Table 7.8, Weld Profiles)

Excessive convexity creates a sharp notch at the weld toes, producing stress concentrations that cause premature fatigue cracking. AWS D1.1 Table 5.8 restricts convexity ( C C C ) based on measured face width ( W W W ):

Width of Weld Face ( W W W ) Maximum Permissible Convexity ( C C C )

W ≤ 8.0 mm W \le 8.0\text{ mm} W ≤ 8.0 mm ( 5 / 16 in 5/16\text{ in} 5/16 in ) 2.0 mm 2.0\text{ mm} 2.0 mm ( 5 / 64 in 5/64\text{ in} 5/64 in )

8.0 mm < W ≤ 25.0 mm 8.0\text{ mm} < W \le 25.0\text{ mm} 8.0 mm < W ≤ 25.0 mm ( 1 in 1\text{ in} 1 in ) 3.0 mm 3.0\text{ mm} 3.0 mm ( 1 / 8 in 1/8\text{ in} 1/8 in )

W > 25.0 mm W > 25.0\text{ mm} W > 25.0 mm ( > 1 in > 1\text{ in} > 1 in ) 5.0 mm 5.0\text{ mm} 5.0 mm ( 3 / 16 in 3/16\text{ in} 3/16 in )

Governing Mechanical Principle: Regardless of whether the applied external force is tension, compression, or shear, structural codes assume that all fillet welds fail in pure shear on the effective throat plane . The shear area is defined as A w = t e ⋅ L = 0.7071 w ⋅ L A_w = t_e \cdot L = 0.7071 w \cdot L A w ​ = t e ​ ⋅ L = 0.7071 w ⋅ L .

Longitudinal vs. Transverse Fillet Welds & The Directional Strength Factor

When a fillet weld group is loaded at an angle θ \theta θ relative to its longitudinal axis, its ultimate shear capacity and deformation behavior vary dramatically. LONGITUDINAL FILLET (θ = 0°) TRANSVERSE FILLET (θ = 90°)

  • Load: P Load: P
  • ^ ^
  • | |
  • +--------+--------+ +--------+--------+
  • | [ WELD BEAD ] | |=================| [WELD BEAD]
  • | | | |
  • +-----------------+ +-----------------+
  • Shear Parallel to Weld Shear & Tension Normal to Throat
  • AISC 360-16 Directional Factor Formulation

Under AISC 360-16 Specification Section J2.4 , the nominal shear stress of a fillet weld ( F n w F_{nw} F n w ​ ) is modified by the load angle θ \theta θ (where θ = 0 ∘ \theta = 0^\circ θ = 0 ∘ for longitudinal shear and θ = 90 ∘ \theta = 90^\circ θ = 9 0 ∘ for transverse shear): F n w = 0.60 F E X X [ 1.0 + 0.50 sin ⁡ 1.5 ( θ ) ] F_{nw} = 0.60 F_{EXX} \left[ 1.0 + 0.50 \sin^{1.5}(\theta) \right] F n w ​ = 0.60 F EXX ​ [ 1.0 + 0.50 sin 1.5 ( θ ) ]

Longitudinal Welds ( θ = 0 ∘ \theta = 0^\circ θ = 0 ∘ ): sin ⁡ ( 0 ∘ ) = 0 ⟹ F n w = 0.60 F E X X [ 1.0 ] = 0.60 F E X X \sin(0^\circ) = 0 \implies F_{nw} = 0.60 F_{EXX} [1.0] = 0.60 F_{EXX} sin ( 0 ∘ ) = 0 ⟹ F n w ​ = 0.60 F EXX ​ [ 1.0 ] = 0.60 F EXX ​

Transverse Welds ( θ = 90 ∘ \theta = 90^\circ θ = 9 0 ∘ ): sin ⁡ ( 90 ∘ ) = 1.0 ⟹ F n w = 0.60 F E X X [ 1.0 + 0.50 ( 1.0 ) 1.5 ] = 1.50 × ( 0.60 F E X X ) = 0.90 F E X X \sin(90^\circ) = 1.0 \implies F_{nw} = 0.60 F_{EXX} [1.0 + 0.50(1.0)^{1.5}] = 1.50 \times (0.60 F_{EXX}) = 0.90 F_{EXX} sin ( 9 0 ∘ ) = 1.0 ⟹ F n w ​ = 0.60 F EXX ​ [ 1.0 + 0.50 ( 1.0 ) 1.5 ] = 1.50 × ( 0.60 F EXX ​ ) = 0.90 F EXX ​

A pure transverse fillet weld exhibits 50 % 50\% 50% greater nominal strength than an identical longitudinal fillet weld. This strength enhancement arises from the complex triaxial stress state across the inclined throat plane, which combines normal tensile stresses with shear stresses.

The Strength-Ductility Trade-off

While transverse welds are 50% stronger, they exhibit significantly lower deformation capacity (ductility) than longitudinal welds:

Longitudinal fillet weld fracture strain: Δ u ≈ 0.17 w \Delta_u \approx 0.17 w Δ u ​ ≈ 0.17 w to 0.30 w 0.30 w 0.30 w (high ductility, extensive plastic yield plateau).

Transverse fillet weld fracture strain: Δ u ≈ 0.05 w \Delta_u \approx 0.05 w Δ u ​ ≈ 0.05 w to 0.10 w 0.10 w 0.10 w (brittle-like rupture with minimal plastic deformation). Stress (F_nw)

  • ^
  • | /--- Transverse (θ = 90°): Peak = 1.50 F_0, Brittle Fracture at Δu ≈ 0.05 w
  • 1.50 | / \
  • | / \
  • 1.00 | / \___________ Longitudinal (θ = 0°): Peak = 1.0 F_0, Ductile Plateau to Δu ≈ 0.20 w
  • | / \
  • | / \
  • +-------+----------------------+---------------------> Deformation (Δ)
  • Δ_u(90°) Δ_u(0°)
  • Combining Longitudinal and Transverse Fillets (AISC J2.4)

Because transverse welds fail at small deformations before longitudinal welds reach their peak plastic strength, directly adding unreduced peak capacities ( R n = 1.0 R n w − long + 1.5 R n w − trans R_n = 1.0 R_{nw-\text{long}} + 1.5 R_{nw-\text{trans}} R n ​ = 1.0 R n w − long ​ + 1.5 R n w − trans ​ ) is physically non-conservative. AISC 360 Section J2.4 mandates that the nominal strength of a combined weld group be taken as the greater of: R n = R n w l + R n w t (Equation J2-10a, using basic unamplified 0.60 F E X X for both) R_n = R_{nwl} + R_{nwt} \quad \text{(Equation J2-10a, using basic unamplified } 0.60 F_{EXX} \text{ for both)} R n ​ = R n wl ​ + R n wt ​ (Equation J2-10a, using basic unamplified 0.60 F EXX ​ for both) R n = 0.85 R n w l + 1.5 R n w t (Equation J2-10b, pairing amplified transverse with 85% longitudinal) R_n=0.85 R_{nwl} + 1.5 R_{nwt} \quad \text{(Equation J2-10b, pairing amplified transverse with 85\% longitudinal)} R n ​ = 0.85 R n wl ​ + 1.5 R n wt ​ (Equation J2-10b, pairing amplified transverse with 85% longitudinal)

Allowable Stress Design (ASD) vs. Load & Resistance Factor Design (LRFD)

Structural sizing must adhere strictly to either ASD or LRFD design methodologies per AISC 360 and AWS D1.1 Clause 4.

Sizing Matrix for Fillet Welds

Design Parameter Load & Resistance Factor Design (LRFD) Allowable Stress Design (ASD)

Design Criterion Required Strength R u ≤ Design Strength ϕ R n R_u \le \text{Design Strength } \phi R_n R u ​ ≤ Design Strength ϕ R n ​ Required Strength R a ≤ Allowable Strength R n / Ω R_a \le \text{Allowable Strength } R_n / \Omega R a ​ ≤ Allowable Strength R n ​ /Ω

Safety Factors Resistance Factor ϕ = 0.75 \phi = 0.75 ϕ = 0.75 Safety Factor Ω = 2.00 \Omega = 2.00 Ω = 2.00

Nominal Weld Stress ( F n w F_{nw} F n w ​ ) F n w = 0.60 F E X X [ 1.0 + 0.50 sin ⁡ 1.5 ( θ ) ] F_{nw} = 0.60 F_{EXX} [1.0 + 0.50 \sin^{1.5}(\theta)] F n w ​ = 0.60 F EXX ​ [ 1.0 + 0.50 sin 1.5 ( θ )] F n w = 0.60 F E X X [ 1.0 + 0.50 sin ⁡ 1.5 ( θ ) ] F_{nw} = 0.60 F_{EXX} [1.0 + 0.50 \sin^{1.5}(\theta)] F n w ​ = 0.60 F EXX ​ [ 1.0 + 0.50 sin 1.5 ( θ )]

Limiting Weld Metal Stress ϕ F n w = 0.75 ( 0.60 F E X X ) = 0.45 F E X X \phi F_{nw} = 0.75(0.60 F_{EXX}) = 0.45 F_{EXX} ϕ F n w ​ = 0.75 ( 0.60 F EXX ​ ) = 0.45 F EXX ​ F allow = 0.60 F E X X 2.00 = 0.30 F E X X F_{\text{allow}} = \frac{0.60 F_{EXX}}{2.00} = 0.30 F_{EXX} F allow ​ = 2.00 0.60 F EXX ​ ​ = 0.30 F EXX ​

E70 Electrode ( F E X X = 70 ksi F_{EXX} = 70\text{ ksi} F EXX ​ = 70 ksi ) ϕ F n w = 0.45 ( 70 ) = 31.5 ksi = 217.2 MPa \phi F_{nw} = 0.45(70) = 31.5\text{ ksi} = 217.2\text{ MPa} ϕ F n w ​ = 0.45 ( 70 ) = 31.5 ksi = 217.2 MPa F allow = 0.30 ( 70 ) = 21.0 ksi = 144.8 MPa F_{\text{allow}} = 0.30(70) = 21.0\text{ ksi} = 144.8\text{ MPa} F allow ​ = 0.30 ( 70 ) = 21.0 ksi = 144.8 MPa

Unit Shear per Sixteenth-in Leg ( D D D ) ϕ q n = 1.392 kips/in per 1/16-in \phi q_n = 1.392\text{ kips/in per 1/16-in} ϕ q n ​ = 1.392 kips/in per 1/16-in q allow = 0.928 kips/in per 1/16-in q_{\text{allow}} = 0.928\text{ kips/in per 1/16-in} q allow ​ = 0.928 kips/in per 1/16-in

Unit Shear per mm Leg ( w w w ) ϕ q n = 153.6 N/mm per mm leg \phi q_n = 153.6\text{ N/mm per mm leg} ϕ q n ​ = 153.6 N/mm per mm leg q allow = 102.4 N/mm per mm leg q_{\text{allow}} = 102.4\text{ N/mm per mm leg} q allow ​ = 102.4 N/mm per mm leg

Base Metal Strength Limits (AISC J2.4)

The strength of the connection is the minimum of the weld metal strength and the adjacent base metal strength evaluated along the fusion boundary:

Base Metal Shear Yielding (gross area A g v A_{gv} A gv ​ ):

LRFD: ϕ R n = 1.00 × ( 0.60 F y A g v ) \phi R_n = 1.00 \times (0.60 F_y A_{gv}) ϕ R n ​ = 1.00 × ( 0.60 F y ​ A gv ​ )

ASD: R n / Ω = 0.60 F y A g v 1.50 = 0.40 F y A g v R_n / \Omega = \frac{0.60 F_y A_{gv}}{1.50} = 0.40 F_y A_{gv} R n ​ /Ω = 1.50 0.60 F y ​ A gv ​ ​ = 0.40 F y ​ A gv ​

Base Metal Shear Rupture (net area A n v A_{nv} A n v ​ ):

LRFD: ϕ R n = 0.75 × ( 0.60 F u A n v ) = 0.45 F u A n v \phi R_n = 0.75 \times (0.60 F_u A_{nv}) = 0.45 F_u A_{nv} ϕ R n ​ = 0.75 × ( 0.60 F u ​ A n v ​ ) = 0.45 F u ​ A n v ​

ASD: R n / Ω = 0.60 F u A n v 2.00 = 0.30 F u A n v R_n / \Omega = \frac{0.60 F_u A_{nv}}{2.00} = 0.30 F_u A_{nv} R n ​ /Ω = 2.00 0.60 F u ​ A n v ​ ​ = 0.30 F u ​ A n v ​

Filler Metal Matching Relationships (AWS D1.1 Table 5.4)

Selecting filler metal strength relative to the base metal yield and tensile strength governs failure modes, preheat requirements, and cracking susceptibility.

  • Matching Categories UNDERMATCHED MATCHED OVERMATCHED
  • [F_EXX < F_u,base] [F_EXX ≈ F_u,base] [F_EXX > F_u,base]
  • Plastic strain in Uniform plastic Plastic strain forced
  • weld; high ductility; deformation across into base metal HAZ;

prevents HAZ cracks. joint assembly. brittle cleavage risk.

Matching Filler Metal (Standard): The electrode tensile strength matches the specified minimum tensile strength of the base metal (e.g., AWS A5.1 E7018 with ASTM A36, A572 Gr 50, or A992 steel). Mandated for Complete Joint Penetration (CJP) groove welds transferring full tension.

Undermatching Filler Metal: The electrode tensile strength is intentionally lower than that of the base metal (e.g., using E7018 filler metal on ASTM A514 100 ksi 100\text{ ksi} 100 ksi quenched and tempered plate). Highly recommended for fillet welds and PJP groove welds in high-strength steels. The softer weld metal yields plastically to relieve severe thermal shrinkage strains, preventing hydrogen-induced cold cracking in the high-hardenability heat-affected zone (HAZ).

Overmatching Filler Metal: The electrode strength exceeds that of the base metal (e.g., depositing E9018 on ASTM A36). Overmatching is generally discouraged in structural engineering. Under severe overload, the ultra-strong weld deposit refuses to yield, forcing plastic strain localization into the narrow, notch-sensitive HAZ coarse-grained region, which dramatically increases the risk of catastrophic brittle fracture.

  • Groove Welds: CJP vs. PJP Sizing Rules
  • 1. Complete Joint Penetration (CJP) Groove Welds

Under AWS D1.1 Clause 4.4 and AISC 360 Section J2.1:

Effective Area ( A e A_e A e ​ ): Equal to the plate thickness multiplied by the weld length: A e = t ⋅ L A_e = t \cdot L A e ​ = t ⋅ L .

Tensile or Compressive Stress Normal to Effective Area: The design/allowable stress of a CJP weld using matching filler metal equals the base metal design/allowable stress: LRFD: ϕ R n = ϕ F y A e ( ϕ = 0.90 ) or ϕ F u A e ( ϕ = 0.75 ) \text{LRFD: } \phi R_n = \phi F_y A_e \quad (\phi = 0.90) \quad \text{or} \quad \phi F_u A_e \quad (\phi = 0.75) LRFD: ϕ R n ​ = ϕ F y ​ A e ​ ( ϕ = 0.90 ) or ϕ F u ​ A e ​ ( ϕ = 0.75 ) ASD: F allow = 0.60 F y or 0.50 F u \text{ASD: } F_{\text{allow}} = 0.60 F_y \quad \text{or} \quad 0.50 F_u ASD: F allow ​ = 0.60 F y ​ or 0.50 F u ​

Engineering Rule: CJP groove welds with matching electrodes are 100 % 100\% 100% efficient; calculations of weld metal throat stress under direct tension or compression are unnecessary because the base metal will yield before the weld fails.

2. Partial Joint Penetration (PJP) Groove Welds

PJP welds do not penetrate the entire joint thickness. The effective throat ( E E E ) is a function of joint preparation angle and process.

  • AWS D1.1 Clause 5.4 / Table 5.5 Effective Throat Deduction Rules 60° GROOVE ANGLE 45° GROOVE ANGLE (SMAW)
  • (Full Credit) (3 mm / 1/8-in Deduction)
  • \ 60° / \ 45° /
  • \ / \ /
  • \ / \ / <-- S
  • =============+============= =============+============= |
  • E = S E = S - 3 mm V E
  • (Depth of bevel equals (Arc cannot reach root apex;
  • effective throat) unfused gap forms)

Groove Angle ≥ 60 ∘ \ge 60^\circ ≥ 6 0 ∘ : Effective throat equals the depth of bevel preparation ( E = S E = S E = S ) for all processes (SMAW, GMAW, FCAW, SAW).

Groove Angle = 45 ∘ = 45^\circ = 4 5 ∘ : When manual Shielded Metal Arc Welding (SMAW) or self-shielded flux-cored arc welding (FCAW-S) is used without backing, the manual rod diameter prevents full penetration to the root apex. AWS D1.1 mandates a 3 mm 3\text{ mm} 3 mm ( 1 / 8 in 1/8\text{ in} 1/8 in ) deduction : E = S − 3 mm ( E = S − 1 / 8 in ) E = S - 3\text{ mm} \quad (E = S - 1/8\text{ in}) E = S − 3 mm ( E = S − 1/8 in )

For Gas Metal Arc Welding (GMAW) or Gas-Shielded Flux Cored (FCAW-G) in 45 ∘ 45^\circ 4 5 ∘ grooves, full credit ( E = S E = S E = S ) is permitted provided the process is qualified in the flat or horizontal position.