Study guide

13.5 Acoustic Wave Mechanics, Refraction & Angle-Beam Sound-Path Geometry

AWS CWEng Certified Welding Engineer Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & CWEng Exam Overview

About the CWEng Exam: Four Parts, 163 Questions & Testing Logistics Scoring, Composite Weighting, Eligibility & Five-Year Renewal How to Use This Guide & Build Your Open-Book Reference Set

2 Chapter 1: Mathematics & Statistics for Welding Engineers

1.1 Engineering Mathematics: Algebra, Trigonometry & Geometry in Weldments 1.2 Differential & Integral Calculus Fundamentals in Engineering Analysis 1.3 Applied Engineering Statistics, Population Distributions & Quality Metrics 1.4 Polynomial Equations, Conic Sections & Complex Numbers

3 Chapter 2: Physics Fundamentals & Mechanics

2.1 Unit Systems, Dimensional Analysis & Engineering Conversions 2.2 Mechanics: Statics, Equilibrium, Force Vectors & Moments 2.3 Work, Energy, Power & Mechanical Advantage in Welding Systems 2.4 Thermal Physics, Linear/Volumetric Expansion & Heat Capacity

4 Chapter 3: General & Physical Chemistry for Welding

3.1 Atomic Structure, Bonding & Solid-Solution Thermodynamics 3.2 Hume-Rothery Compatibility, Interstitial Strain & HSLA Microalloy Scavenging 3.3 Gas Laws, Dalton Partial Pressures, Arc Dissociation & Sieverts Law 3.4 Cylinder Capacity, Available Arc Time & Gas-Related Porosity Diagnosis 3.5 Redox Thermodynamics, Deoxidation & Slag-Metal Refining 3.6 Basicity Index Calculations, Toughness Prediction & Cryogenic Consumable Selection

5 Chapter 4: Strength of Materials & Mechanics of Materials

4.1 Engineering vs. True Stress-Strain, Elastic Constants & Z-Direction Ductility 4.2 Plane Stress vs. Plane Strain, Triaxial Restraint & Alloy Property Comparison 4.3 Beam Bending, Transverse Shear, Torsion & Mohr Circle Construction 4.4 Multiaxial Yield Criteria & Combined-Load Analysis of Welded Members 4.5 Fatigue Life, Weld-Toe Stress Concentration & Paris-Erdogan Crack Growth 4.6 LEFM Fracture Toughness, Ductile-Brittle Transition & Larson-Miller Creep 4.7 Comparative Failure-Mode Synthesis & Integrated Flaw and Creep Assessment

6 Chapter 5: Heat Transfer & Fluid Mechanics in Welding

5.1 Fourier Conduction, Rosenthal Moving Heat Source & 2D vs. 3D Heat Flow 5.2 Adams Cooling Rate, the t8/5 Window & HAZ Peak-Temperature Distribution 5.3 Convection, Stefan-Boltzmann Radiation & Emissivity of Weld Surfaces 5.4 Arc Radiation Losses, Preheat Maintenance & PWHT Boundary Conditions 5.5 Fluid Statics, Bernoulli, Viscosity & Reynolds-Number Regimes 5.6 Gas Lens Mechanics, Buoyancy Effects & Torch Flow Design 5.7 Hyperbaric, Vacuum & Controlled-Atmosphere Welding Environments

7 Chapter 6: Electrical Engineering Principles for Welding Systems

6.1 DC and AC Waveforms, Polarity Thermodynamics & Welding Circuit Analysis 6.2 Joule Heating, Electrode Stickout Preheating & Circuit Voltage Distribution 6.3 Power Factor, Reactance, Impedance & Magnetic Transformer Principles 6.4 Lorentz Force, Electromagnetic Pinch Effect & Arc Blow

8 Chapter 7: Welding Heat Sources & Arc Physics

7.1 Volt-Ampere Characteristics, Operating Point, Self-Regulation & OCV Limits 7.2 Inductance, Slope Control & Dynamic Power-Source Response 7.3 Arc Fall Regions, Cathode Emission Mechanisms & Shielding-Gas Ionization 7.4 Maecker Plasma Jet, Degree of Ionization & Anode Heat Partitioning 7.5 Droplet Force Balance & Classification of Metal Transfer Regimes 7.6 Transition Current, Mode Comparison & Pulsed Waveform Design

9 Chapter 8: Arc Welding Processes & Parameter Controls

8.1 Shielded Metal Arc Welding (SMAW): Electrode Flux Chemistries & Variables 8.2 GMAW Process Physics, Transfer Modes & Shielding Gas Interactions 8.3 Solid, Metal-Cored & Flux-Cored Wires with CTWD and Parameter Envelopes 8.4 Gas Tungsten (GTAW) & Plasma Arc Welding (PAW): Electrodes & Keyholing 8.5 Submerged Arc Welding (SAW): Flux Basicity, Multi-Wire & High-Deposition Systems

10 Chapter 9: Advanced, Resistance & Solid-State Joining Processes

9.1 High-Energy-Density Beam Physics & Electron Beam Welding 9.2 Laser Beam Welding, EBW/LBW Comparison & Fiber Laser Parameter Derivation 9.3 Resistance Welding Physics, Electrode Materials & Spot Weld Sequence 9.4 Nugget Sizing, Seam and Projection Welding, and Lobe Curve Process Windows 9.5 Solid-State Joining: Friction Stir Welding (FSW), Explosion & Diffusion 9.6 Thermal Cutting & Gouging: Oxyfuel, Plasma Arc and Air Carbon Arc 9.7 High-Frequency, Flash, Stud & Ultrasonic Welding; Surfacing and Thermal Spray

11 Chapter 10: Physical & Transformation Metallurgy of Steels

10.1 Fe-Fe3C System, Crystal Lattices, c/a Ratio & Interstitial Solubility 10.2 Critical Temperatures, Invariant Reactions & the Lever Rule 10.3 Alloying Elements, the Gamma Loop & Phase-Fraction Calculations 10.4 TTT and CCT Diagrams, Constitutional Supercooling & Scheil Microsegregation 10.5 Non-Equilibrium Transformation Products & Martensite Modeling 10.6 HAZ Anatomy, Microstructural Sub-Zones & Multi-Pass Reheated Regions 10.7 HAZ Hardness Traverses, Toughness Gradients & Peak-Temperature Control

12 Chapter 11: Weldability, Cracking Mechanisms & Alloy Metallurgy

11.1 Hydrogen Cracking Conditions, Carbon Equivalent & Diffusible Hydrogen Control 11.2 Preheat, Interpass and Post-Heat Calculations for Cold-Crack Prevention 11.3 Solidification Cracking, Bead Aspect Ratio, Liquation & Lamellar Tearing 11.4 Lamellar Tearing Mitigation & Hot-Cracking Susceptibility Evaluation 11.5 Stainless Families, Schaeffler and WRC-1992 Diagrams, Ferrite Number & Sensitization 11.6 Duplex Stainless Metallurgy & Dissimilar-Metal Ferrite Prediction 11.7 Aluminum Oxide and Porosity Control, and Titanium Reactive-Metal Welding 11.8 Nickel Superalloys, Strain-Age Cracking & Guinier-Preston Aging Sequences

13 Chapter 12: Weldment Design, Stress Analysis & Joint Mechanics

12.1 AWS A2.4 Welding Symbol Anatomy, Symbol Library & Dimension Syntax 12.2 Joint Architecture, CJP versus PJP, and NDE Examination Symbols 12.3 Fillet and Groove Weld Sizing under Direct Stress in ASD and LRFD 12.4 Plug and Slot Welds, Stress Gradients & the Fillet Weld Break Test 12.5 Eccentric Loading Analysis: Elastic Vector Method vs Instantaneous Center 12.6 Fatigue Design of Welded Connections & Residual Stress/Distortion Control

14 Chapter 13: Non-Destructive Examination (NDE) & Discontinuity Analysis

13.1 Visual Testing Gages & Liquid Penetrant Capillary Mechanics 13.2 Magnetic Particle Testing: Flux Leakage, Field Geometry & Prod Amperage 13.3 Radiographic Physics, Geometric Unsharpness, Density & IQI Sensitivity 13.4 Computed and Digital Radiography & Radiographic Discontinuity Interpretation 13.5 Acoustic Wave Mechanics, Refraction & Angle-Beam Sound-Path Geometry 13.6 AWS D1.1 Decibel Rating, Phased Array & Time-of-Flight Diffraction

15 Chapter 14: Brazing, Soldering & Industrial Welding Safety

14.1 Brazing Thermodynamics, Capillary Wetting Physics & Joint Clearance 14.2 AWS A5.8 Brazing Filler Metals, FB Fluxes & Industrial Heating Processes 14.3 Soldering Fundamentals, Flux Chemistries & Intermetallic Formation 14.4 Hierarchy of Controls, Electric Shock Physics & Industrial Ventilation 14.5 Fume Exposure Limits, Arc Radiation, Hot Work and Confined-Space Entry 14.6 Arc-Generated Toxic Gases, Moving-Equipment Hazards & TWA Exposure Calculation

16 Chapter 15: Structural Fabrication & AWS D1.1 Code Implementation

15.1 AWS D1.1 Scope, Prequalification Limits, Base-Metal Groups & Matching Filler 15.2 Prequalified Joint Details, Backing Systems & Joint Specification Verification 15.3 Thermal Cut Edges, Fit-Up Tolerances & Minimum Preheat Requirements 15.4 Preheat Application Zones, Measurement Instrumentation & Fabrication Audits 15.5 PWHT Fundamentals, D1.1 Thermal Cycles & Visual Acceptance Criteria 15.6 D1.1 Nondestructive Examination Protocols, PWHT Scheduling & Visual Audit Practice

17 Chapter 16: Welding Procedure Qualification (WPS & PQR) per ASME IX & AWS B2.1

16.1 PQR versus WPS Hierarchy, Qualification Workflow & Standard Procedures 16.2 Manufacturer Responsibility, Subcontracting Limits & Multi-Process Qualification 16.3 Essential, Supplementary Essential and Nonessential Variables with Heat Input Mechanics 16.4 Waveform-Controlled Power Sources, Appendix H & Heat-Input Compliance 16.5 P-Numbers, Group Numbers, F-Numbers & A-Numbers 16.6 QW-451 Mechanical Test Protocols & Procedure Qualification Test Evaluation

18 Chapter 17: Filler Metal Specifications, Selection & Consumable Control

17.1 AWS A5 Architecture: SMAW, GMAW/GTAW and FCAW Consumable Classifications 17.2 SAW Wire-Flux Systems, Alloy Pickup & PWHT Property Effects 17.3 Stainless Filler Specifications, Solidification Modes & Dissimilar-Metal Joints 17.4 AWS A5.10 Aluminum Filler Selection & Dilution and Ferrite-Number Calculations 17.5 Consumable Storage, Conditioning Envelopes & Atmospheric Exposure Limits 17.6 Low-Hydrogen Designators, the Yurioka Parameter & Preheat Sizing

19 Chapter 18: Welder Performance Qualification, Quality Management & Welding Economics

18.1 Welder Qualification Philosophy, Test Positions & Thickness and Diameter Ranges 18.2 F-Number Hierarchy, Operator Qualification & Continuity Requirements 18.3 ISO 3834, Welding Coordination, Inspection Test Plans & Equipment Validation 18.4 EN 10204 Material Certification, Traceability & Heat-Input Nonconformance Auditing 18.5 Weld Cost Anatomy, Deposition Rates, Operating Factor & the Overwelding Law 18.6 Economic Optimization Strategies & Fabrication Cost Comparison

13.5 Acoustic Wave Mechanics, Refraction & Angle-Beam Sound-Path Geometry

Key Takeaways Explain This Topic AI

Acoustic wave propagation in steel occurs via Longitudinal (compression) waves (c ≈ 5900 m/s) and Transverse (shear) waves (c ≈ 3240 m/s); acoustic impedance mismatch (Z = ρ · c) dictates interface reflection and transmission, with 100% of sound reflected at steel-air boundaries, requiring liquid couplant.

Refracted angle-beam shear waves are generated via Lucite wedges using Snell's Law (sin θ1 / c1 = sin θ2 / c2); the wedge angle is engineered between the first critical angle (27.5°) and second critical angle (57.4°) to completely eliminate confounding longitudinal waves and yield pure 45°, 60°, or 70° shear waves in steel.

Angle-beam sound path, skip distance and surface distance are computed from the refracted angle and part thickness, and a discontinuity found on the second leg lies beyond the first skip.

Straight-beam scanning screens for laminations and measures thickness, but it cannot detect a planar discontinuity lying parallel to the beam.

Ultrasonic coupling requires a couplant to bridge the acoustic impedance mismatch between transducer and steel, since an air gap reflects essentially all of the sound energy.

Last updated: September 2026

13.3 Ultrasonic Testing (UT): Wave Propagation, Angle-Beam Shear, PAUT & TOFD

Quick Answer: Ultrasonic Testing (UT) uses high-frequency acoustic waves ( 0.5 to 15 MHz 0.5\text{ to }15\text{ MHz} 0.5 to 15 MHz ) to detect internal planar and volumetric weld discontinuities. Longitudinal waves ( c L ≈ 5900 m/s c_L \approx 5900\text{ m/s} c L ​ ≈ 5900 m/s ) are deployed for straight-beam thickness and lamination testing, while refracted transverse shear waves ( c S ≈ 3240 m/s c_S \approx 3240\text{ m/s} c S ​ ≈ 3240 m/s ) are generated via Lucite wedges cut between the first ( 27.5 ∘ 27.5^\circ 27. 5 ∘ ) and second ( 57.4 ∘ 57.4^\circ 57. 4 ∘ ) critical angles for angle-beam weld inspection ( 45 ∘ , 60 ∘ , 70 ∘ 45^\circ, 60^\circ, 70^\circ 4 5 ∘ , 6 0 ∘ , 7 0 ∘ ). AWS D1.1 Clause 8 evaluates welds using the decibel rating formula d = a − b − c d = a - b - c d = a − b − c , where lower or negative d d d ratings represent more severe flaws . Advanced methods include Phased Array UT (PAUT) for electronic beam steering / S-scans and Time-of-Flight Diffraction (TOFD) for sub-millimeter flaw height sizing via crack-tip diffraction.

1. Acoustic Wave Mechanics: Wave Types, Velocities & Acoustic Impedance

Ultrasonic testing introduces mechanical vibrational waves into elastic media. In industrial welding metallurgy, piezoelectric transducers convert electrical pulses into mechanical sound packets at center frequencies typically between 2.0 and 5.0 MHz 2.0\text{ and }5.0\text{ MHz} 2.0 and 5.0 MHz . ACOUSTIC WAVE PROPAGATION MODES IN STEEL

  • 1. LONGITUDINAL (COMPRESSION) WAVE: c_L ≈ 5900 m/s
  • Particle Displacement Parallel to Wave Vector
  • <===> <===> <===> <===> <===>
  • ----------------------------> Wave Propagation Direction
  • 2. TRANSVERSE (SHEAR) WAVE: c_S ≈ 3240 m/s
  • Particle Displacement Perpendicular to Wave Vector
  • ^ | ^ |
  • | V | V
  • ----------------------------> Wave Propagation Direction
  • 3. SURFACE (RAYLEIGH) WAVE: c_R ≈ 2900 m/s
  • Retrograde Elliptical Particle Motion Along Boundary
  • Primary Wave Modes in Ferritic Steel

Longitudinal (Compression) Waves ( c L ≈ 5900 m/s = 0.232 in/ μ s c_L \approx 5900\text{ m/s} = 0.232\text{ in/}\mu \text{s} c L ​ ≈ 5900 m/s = 0.232 in/ μ s ): Particle motion is parallel to wave propagation direction. Propagates through solids, liquids, and gases. Deployed in 0 ∘ 0^\circ 0 ∘ straight-beam testing for plate thickness measurement, cladding debonding, and base metal lamination screening.

Transverse (Shear) Waves ( c S ≈ 3240 m/s = 0.128 in/ μ s c_S \approx 3240\text{ m/s} = 0.128\text{ in/}\mu \text{s} c S ​ ≈ 3240 m/s = 0.128 in/ μ s ): Particle motion is strictly perpendicular to wave propagation direction. Shear waves require shear modulus ( G > 0 G > 0 G > 0 ) and therefore cannot propagate in liquids or gases . Transverse wave velocity is roughly 55 % 55\% 55% of longitudinal velocity ( c S / c L ≈ 0.55 c_S / c_L \approx 0.55 c S ​ / c L ​ ≈ 0.55 ). Because shear waves possess shorter wavelengths ( λ = c / f \lambda = c / f λ = c / f ) at identical frequencies, they exhibit far higher sensitivity to microscopic planar flaws.

Rayleigh (Surface) Waves ( c R ≈ 0.90 c S ≈ 2900 m/s c_R \approx 0.90 c_S \approx 2900\text{ m/s} c R ​ ≈ 0.90 c S ​ ≈ 2900 m/s ): Oscillate in a retrograde elliptical orbit along a free surface; energy attenuates exponentially with depth, penetrating roughly one wavelength ( λ \lambda λ ).

Acoustic Impedance & Interface Boundaries

Acoustic impedance ( Z Z Z ) defines a material's resistance to acoustic particle motion: Z = ρ ⋅ c Z = \rho \cdot c Z = ρ ⋅ c

where ρ \rho ρ is material density ( kg/m 3 \text{kg/m}^3 kg/m 3 ) and c c c is acoustic sound velocity ( m/s \text{m/s} m/s ).

Carbon Steel: Z 1 ≈ 7850 × 5900 ≈ 46.3 × 10 6 Rayls Z_1 \approx 7850 \times 5900 \approx 46.3 \times 10^6\text{ Rayls} Z 1 ​ ≈ 7850 × 5900 ≈ 46.3 × 1 0 6 Rayls ( kg / ( m 2 ⋅ s ) \text{kg}/(\text{m}^2\cdot\text{s}) kg / ( m 2 ⋅ s ) )

Water: Z 2 ≈ 1000 × 1480 ≈ 1.48 × 10 6 Rayls Z_2 \approx 1000 \times 1480 \approx 1.48 \times 10^6\text{ Rayls} Z 2 ​ ≈ 1000 × 1480 ≈ 1.48 × 1 0 6 Rayls

Air: Z 3 ≈ 1.2 × 340 ≈ 408 Rayls Z_3 \approx 1.2 \times 340 \approx 408\text{ Rayls} Z 3 ​ ≈ 1.2 × 340 ≈ 408 Rayls

Lucite (Polymethyl methacrylate): Z 4 ≈ 1180 × 2730 ≈ 3.22 × 10 6 Rayls Z_4 \approx 1180 \times 2730 \approx 3.22 \times 10^6\text{ Rayls} Z 4 ​ ≈ 1180 × 2730 ≈ 3.22 × 1 0 6 Rayls

Reflection and Transmission Coefficients

At normal incidence across a flat boundary between medium 1 and medium 2, the pressure reflection coefficient ( R R R ) and transmission coefficient ( T T T ) are: R = Z 2 − Z 1 Z 2 + Z 1 , T = 2 Z 2 Z 2 + Z 1 R = \frac{Z_2 - Z_1}{Z_2 + Z_1}, \qquad T = \frac{2 Z_2}{Z_2 + Z_1} R = Z 2 ​ + Z 1 ​ Z 2 ​ − Z 1 ​ ​ , T = Z 2 ​ + Z 1 ​ 2 Z 2 ​ ​

Steel-to-Air Boundary: R = 408 − 46 , 300 , 000 408 + 46 , 300 , 000 ≈ − 0.99998 ≈ − 100 % R = \frac{408 - 46,300,000}{408 + 46,300,000} \approx -0.99998 \approx -100\% R = 408 + 46 , 300 , 000 408 − 46 , 300 , 000 ​ ≈ − 0.99998 ≈ − 100% Nearly 100 % 100\% 100% of the acoustic energy is reflected at any steel-air boundary. This physical fact explains two fundamental operational principles:

Ultrasonic waves cannot cross an air gap between transducer and steel; a liquid couplant (cellulose gel, light oil, or water) is mandatory to displace air.

Ultrasonic testing is exceptionally sensitive to cracks and delaminations, because even a sub-micron air gap acts as an absolute 100 % 100\% 100% acoustic mirror.

2. Refraction, Mode Conversion & Angle-Beam Lucite Wedge Design

When a longitudinal wave propagating through a plastic wedge strikes an inclined interface with steel at an oblique incident angle ( θ 1 \theta_1 θ 1 ​ ), both refraction and mode conversion occur. The incident wave splits into two distinct refracted waves: a refracted longitudinal wave and a refracted transverse (shear) wave. MODE CONVERSION & SNELL'S REFRACTION AT WEDGE

  • Piezoelectric Element
  • +---------+
  • | Transd. |
  • +----+----+
  • | Incident Longitudinal Wave (c1 = 2730 m/s)
  • Lucite Wedge | Angle: θ1
  • V
  • -------------------------------+-------------------------------- Steel Surface
  • / \
  • / \
  • / \ Refracted Shear Wave (cS = 3240 m/s)
  • / \ Angle: θS (e.g., 45°, 60°, 70°)
  • / V
  • Refracted Longitudinal /
  • Wave (cL = 5900 m/s) V
  • Angle: θL
  • Snell's Law of Acoustic Refraction

The angular relationship is governed by Snell's Law : sin ⁡ θ 1 c wedge , L = sin ⁡ θ L 2 c steel , L = sin ⁡ θ S 2 c steel , S \frac{\sin \theta_1}{c_{\text{wedge}, L}} = \frac{\sin \theta_{L2}}{c_{\text{steel}, L}} = \frac{\sin \theta_{S2}}{c_{\text{steel}, S}} c wedge , L ​ sin θ 1 ​ ​ = c steel , L ​ sin θ L 2 ​ ​ = c steel , S ​ sin θ S 2 ​ ​

where:

θ 1 \theta_1 θ 1 ​ = Incident angle in the Lucite wedge

c wedge , L = 2730 m/s c_{\text{wedge}, L} = 2730\text{ m/s} c wedge , L ​ = 2730 m/s (longitudinal velocity in Lucite)

θ L 2 \theta_{L2} θ L 2 ​ = Refracted longitudinal angle in steel ( c steel , L = 5900 m/s c_{\text{steel}, L} = 5900\text{ m/s} c steel , L ​ = 5900 m/s )

θ S 2 \theta_{S2} θ S 2 ​ = Refracted shear angle in steel ( c steel , S = 3240 m/s c_{\text{steel}, S} = 3240\text{ m/s} c steel , S ​ = 3240 m/s )

The Two Critical Angles

Because sound travels faster in steel than in Lucite, increasing the wedge angle θ 1 \theta_1 θ 1 ​ refracts the waves closer to the surface plane ( 90 ∘ 90^\circ 9 0 ∘ ): 0° < θ1 < 27.5° 27.5° < θ1 < 57.4° θ1 > 57.4°

------------------------ ---------------------------- ----------------------

Dual Mode Region: OPERATIONAL ANGLE-BEAM WINDOW: Total Reflection:

  • Both Longitudinal & Longitudinal wave vanishes; Both modes vanish;
  • Shear waves coexist PURE SHEAR WAVE IN STEEL Rayleigh surface waves

in steel. (Confusing) (Standard: 45°, 60°, 70°) only.

First Critical Angle ( θ c 1 \theta_{c1} θ c 1 ​ ): The incident angle at which the refracted longitudinal wave in steel refracts to exactly 90 ∘ 90^\circ 9 0 ∘ (parallel to the plate surface): sin ⁡ θ c 1 = c wedge , L c steel , L = 2730 m/s 5900 m/s = 0.4627 ⟹ θ c 1 = arcsin ⁡ ( 0.4627 ) ≈ 27.56 ∘ \sin \theta_{c1} = \frac{c_{\text{wedge}, L}}{c_{\text{steel}, L}} = \frac{2730\text{ m/s}}{5900\text{ m/s}} = 0.4627 \implies \theta_{c1} = \arcsin(0.4627) \approx 27.56^\circ sin θ c 1 ​ = c steel , L ​ c wedge , L ​ ​ = 5900 m/s 2730 m/s ​ = 0.4627 ⟹ θ c 1 ​ = arcsin ( 0.4627 ) ≈ 27.5 6 ∘ At angles beyond 27.56 ∘ 27.56^\circ 27.5 6 ∘ , the longitudinal wave in steel is completely eliminated via total internal reflection.

Second Critical Angle ( θ c 2 \theta_{c2} θ c 2 ​ ): The incident angle at which the refracted shear wave in steel reaches 90 ∘ 90^\circ 9 0 ∘ : sin ⁡ θ c 2 = c wedge , L c steel , S = 2730 m/s 3240 m/s = 0.8426 ⟹ θ c 2 = arcsin ⁡ ( 0.8426 ) ≈ 57.42 ∘ \sin \theta_{c2} = \frac{c_{\text{wedge}, L}}{c_{\text{steel}, S}} = \frac{2730\text{ m/s}}{3240\text{ m/s}} = 0.8426 \implies \theta_{c2} = \arcsin(0.8426) \approx 57.42^\circ sin θ c 2 ​ = c steel , S ​ c wedge , L ​ ​ = 3240 m/s 2730 m/s ​ = 0.8426 ⟹ θ c 2 ​ = arcsin ( 0.8426 ) ≈ 57.4 2 ∘ At angles beyond 57.42 ∘ 57.42^\circ 57.4 2 ∘ , shear waves cease to propagate into the body of the steel, converting entirely into surface Rayleigh waves.

The Operational Angle-Beam Window

To conduct clean angle-beam shear wave inspection without ghost signals or confusing dual-mode reflections, wedge angles must fall between 27.6 ∘ 27.6^\circ 27. 6 ∘ and 57.4 ∘ 57.4^\circ 57. 4 ∘ . Standard industrial refracted shear angles in steel are:

45 ∘ 45^\circ 4 5 ∘ Shear Wedge: Incident wedge angle θ 1 = arcsin ⁡ ( 2730 3240 sin ⁡ 45 ∘ ) = arcsin ⁡ ( 0.8426 × 0.7071 ) = arcsin ⁡ ( 0.5958 ) ≈ 36.6 ∘ \theta_1 = \arcsin\left( \frac{2730}{3240} \sin 45^\circ \right) = \arcsin(0.8426 \times 0.7071) = \arcsin(0.5958) \approx 36.6^\circ θ 1 ​ = arcsin ( 3240 2730 ​ sin 4 5 ∘ ) = arcsin ( 0.8426 × 0.7071 ) = arcsin ( 0.5958 ) ≈ 36. 6 ∘ .

60 ∘ 60^\circ 6 0 ∘ Shear Wedge: Incident wedge angle θ 1 = arcsin ⁡ ( 0.8426 × 0.8660 ) = arcsin ⁡ ( 0.7297 ) ≈ 46.9 ∘ \theta_1 = \arcsin(0.8426 \times 0.8660) = \arcsin(0.7297) \approx 46.9^\circ θ 1 ​ = arcsin ( 0.8426 × 0.8660 ) = arcsin ( 0.7297 ) ≈ 46. 9 ∘ .

70 ∘ 70^\circ 7 0 ∘ Shear Wedge: Incident wedge angle θ 1 = arcsin ⁡ ( 0.8426 × 0.9397 ) = arcsin ⁡ ( 0.7918 ) ≈ 52.4 ∘ \theta_1 = \arcsin(0.8426 \times 0.9397) = \arcsin(0.7918) \approx 52.4^\circ θ 1 ​ = arcsin ( 0.8426 × 0.9397 ) = arcsin ( 0.7918 ) ≈ 52. 4 ∘ .

  • 3. Straight-Beam Lamination Screening & Sound Path Geometry
  • Base Metal Lamination Screening (AWS D1.1 Clause 8, Part F)

Prior to performing angle-beam examination on any CJP groove weld, AWS D1.1 Clause 8 strictly mandates that the base metal through which the angle beam must travel be scanned using a 0 ∘ 0^\circ 0 ∘ straight-beam longitudinal transducer .

Engineering Rationale: Rolling mills can produce laminar inclusions (elongated manganese sulfides) aligned parallel to the plate surface. If an angle beam enters a plate containing a lamination, the acoustic shear wave strikes the lamination boundary and reflects away prematurely. The ultrasound never reaches the weld fusion zone, producing a fatal false-negative result . BASE METAL LAMINATION SHIELDING WELD DEFECT

  • Angle-Beam Transducer
  • +---------+
  • \ Wedge \
  • +---------+
  • \ Acoustic Beam
  • \
  • ============================\========================[===WELD===]==== Base Plate
  • \ Base Metal Lamination
  • \====[LAMINATION]==== (Unfused Root Defect
  • / is NEVER reached
  • / Reflected Away! by Sound Beam!)
  • ============================/========================================
  • Skip Distance & Scanning Legs

Angle-beam testing steers sound through the plate via boundary reflections off the top and bottom surfaces: ANGLE-BEAM SKIP DISTANCE GEOMETRY

  • Transducer
  • +--------+
  • \ \
  • +-------+
  • \ Top Surface
  • ===============+=======================================+==========
  • \ /
  • Leg 1 \ Thickness (t) / Leg 2
  • (Direct) \ / (Skipped)
  • \ /
  • ====================+=============================+================
  • Bottom Surface / Backwall
  • |<--------- Skip Distance (S) --------->|

Leg 1 (Half Skip / Direct Path): The sound path traveling from the transducer index point directly to the bottom plate surface. Depth = Sound Path × cos ⁡ ( θ ) \text{Depth} = \text{Sound Path} \times \cos(\theta) Depth = Sound Path × cos ( θ ) Surface Distance = Sound Path × sin ⁡ ( θ ) \text{Surface Distance} = \text{Sound Path} \times \sin(\theta) Surface Distance = Sound Path × sin ( θ ) Leg 1 Surface Reach = t × tan ⁡ ( θ ) \text{Leg 1 Surface Reach} = t \times \tan(\theta) Leg 1 Surface Reach = t × tan ( θ )

Leg 2 (Full Skip): The sound path reflecting off the bottom surface and traveling upward toward the top surface. Total Skip Distance (Full Skip) = 2 × t × tan ⁡ ( θ ) \text{Total Skip Distance (Full Skip)} = 2 \times t \times \tan(\theta) Total Skip Distance (Full Skip) = 2 × t × tan ( θ )