Study guide

13.6 AWS D1.1 Decibel Rating, Phased Array & Time-of-Flight Diffraction

AWS CWEng Certified Welding Engineer Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & CWEng Exam Overview

About the CWEng Exam: Four Parts, 163 Questions & Testing Logistics Scoring, Composite Weighting, Eligibility & Five-Year Renewal How to Use This Guide & Build Your Open-Book Reference Set

2 Chapter 1: Mathematics & Statistics for Welding Engineers

1.1 Engineering Mathematics: Algebra, Trigonometry & Geometry in Weldments 1.2 Differential & Integral Calculus Fundamentals in Engineering Analysis 1.3 Applied Engineering Statistics, Population Distributions & Quality Metrics 1.4 Polynomial Equations, Conic Sections & Complex Numbers

3 Chapter 2: Physics Fundamentals & Mechanics

2.1 Unit Systems, Dimensional Analysis & Engineering Conversions 2.2 Mechanics: Statics, Equilibrium, Force Vectors & Moments 2.3 Work, Energy, Power & Mechanical Advantage in Welding Systems 2.4 Thermal Physics, Linear/Volumetric Expansion & Heat Capacity

4 Chapter 3: General & Physical Chemistry for Welding

3.1 Atomic Structure, Bonding & Solid-Solution Thermodynamics 3.2 Hume-Rothery Compatibility, Interstitial Strain & HSLA Microalloy Scavenging 3.3 Gas Laws, Dalton Partial Pressures, Arc Dissociation & Sieverts Law 3.4 Cylinder Capacity, Available Arc Time & Gas-Related Porosity Diagnosis 3.5 Redox Thermodynamics, Deoxidation & Slag-Metal Refining 3.6 Basicity Index Calculations, Toughness Prediction & Cryogenic Consumable Selection

5 Chapter 4: Strength of Materials & Mechanics of Materials

4.1 Engineering vs. True Stress-Strain, Elastic Constants & Z-Direction Ductility 4.2 Plane Stress vs. Plane Strain, Triaxial Restraint & Alloy Property Comparison 4.3 Beam Bending, Transverse Shear, Torsion & Mohr Circle Construction 4.4 Multiaxial Yield Criteria & Combined-Load Analysis of Welded Members 4.5 Fatigue Life, Weld-Toe Stress Concentration & Paris-Erdogan Crack Growth 4.6 LEFM Fracture Toughness, Ductile-Brittle Transition & Larson-Miller Creep 4.7 Comparative Failure-Mode Synthesis & Integrated Flaw and Creep Assessment

6 Chapter 5: Heat Transfer & Fluid Mechanics in Welding

5.1 Fourier Conduction, Rosenthal Moving Heat Source & 2D vs. 3D Heat Flow 5.2 Adams Cooling Rate, the t8/5 Window & HAZ Peak-Temperature Distribution 5.3 Convection, Stefan-Boltzmann Radiation & Emissivity of Weld Surfaces 5.4 Arc Radiation Losses, Preheat Maintenance & PWHT Boundary Conditions 5.5 Fluid Statics, Bernoulli, Viscosity & Reynolds-Number Regimes 5.6 Gas Lens Mechanics, Buoyancy Effects & Torch Flow Design 5.7 Hyperbaric, Vacuum & Controlled-Atmosphere Welding Environments

7 Chapter 6: Electrical Engineering Principles for Welding Systems

6.1 DC and AC Waveforms, Polarity Thermodynamics & Welding Circuit Analysis 6.2 Joule Heating, Electrode Stickout Preheating & Circuit Voltage Distribution 6.3 Power Factor, Reactance, Impedance & Magnetic Transformer Principles 6.4 Lorentz Force, Electromagnetic Pinch Effect & Arc Blow

8 Chapter 7: Welding Heat Sources & Arc Physics

7.1 Volt-Ampere Characteristics, Operating Point, Self-Regulation & OCV Limits 7.2 Inductance, Slope Control & Dynamic Power-Source Response 7.3 Arc Fall Regions, Cathode Emission Mechanisms & Shielding-Gas Ionization 7.4 Maecker Plasma Jet, Degree of Ionization & Anode Heat Partitioning 7.5 Droplet Force Balance & Classification of Metal Transfer Regimes 7.6 Transition Current, Mode Comparison & Pulsed Waveform Design

9 Chapter 8: Arc Welding Processes & Parameter Controls

8.1 Shielded Metal Arc Welding (SMAW): Electrode Flux Chemistries & Variables 8.2 GMAW Process Physics, Transfer Modes & Shielding Gas Interactions 8.3 Solid, Metal-Cored & Flux-Cored Wires with CTWD and Parameter Envelopes 8.4 Gas Tungsten (GTAW) & Plasma Arc Welding (PAW): Electrodes & Keyholing 8.5 Submerged Arc Welding (SAW): Flux Basicity, Multi-Wire & High-Deposition Systems

10 Chapter 9: Advanced, Resistance & Solid-State Joining Processes

9.1 High-Energy-Density Beam Physics & Electron Beam Welding 9.2 Laser Beam Welding, EBW/LBW Comparison & Fiber Laser Parameter Derivation 9.3 Resistance Welding Physics, Electrode Materials & Spot Weld Sequence 9.4 Nugget Sizing, Seam and Projection Welding, and Lobe Curve Process Windows 9.5 Solid-State Joining: Friction Stir Welding (FSW), Explosion & Diffusion 9.6 Thermal Cutting & Gouging: Oxyfuel, Plasma Arc and Air Carbon Arc 9.7 High-Frequency, Flash, Stud & Ultrasonic Welding; Surfacing and Thermal Spray

11 Chapter 10: Physical & Transformation Metallurgy of Steels

10.1 Fe-Fe3C System, Crystal Lattices, c/a Ratio & Interstitial Solubility 10.2 Critical Temperatures, Invariant Reactions & the Lever Rule 10.3 Alloying Elements, the Gamma Loop & Phase-Fraction Calculations 10.4 TTT and CCT Diagrams, Constitutional Supercooling & Scheil Microsegregation 10.5 Non-Equilibrium Transformation Products & Martensite Modeling 10.6 HAZ Anatomy, Microstructural Sub-Zones & Multi-Pass Reheated Regions 10.7 HAZ Hardness Traverses, Toughness Gradients & Peak-Temperature Control

12 Chapter 11: Weldability, Cracking Mechanisms & Alloy Metallurgy

11.1 Hydrogen Cracking Conditions, Carbon Equivalent & Diffusible Hydrogen Control 11.2 Preheat, Interpass and Post-Heat Calculations for Cold-Crack Prevention 11.3 Solidification Cracking, Bead Aspect Ratio, Liquation & Lamellar Tearing 11.4 Lamellar Tearing Mitigation & Hot-Cracking Susceptibility Evaluation 11.5 Stainless Families, Schaeffler and WRC-1992 Diagrams, Ferrite Number & Sensitization 11.6 Duplex Stainless Metallurgy & Dissimilar-Metal Ferrite Prediction 11.7 Aluminum Oxide and Porosity Control, and Titanium Reactive-Metal Welding 11.8 Nickel Superalloys, Strain-Age Cracking & Guinier-Preston Aging Sequences

13 Chapter 12: Weldment Design, Stress Analysis & Joint Mechanics

12.1 AWS A2.4 Welding Symbol Anatomy, Symbol Library & Dimension Syntax 12.2 Joint Architecture, CJP versus PJP, and NDE Examination Symbols 12.3 Fillet and Groove Weld Sizing under Direct Stress in ASD and LRFD 12.4 Plug and Slot Welds, Stress Gradients & the Fillet Weld Break Test 12.5 Eccentric Loading Analysis: Elastic Vector Method vs Instantaneous Center 12.6 Fatigue Design of Welded Connections & Residual Stress/Distortion Control

14 Chapter 13: Non-Destructive Examination (NDE) & Discontinuity Analysis

13.1 Visual Testing Gages & Liquid Penetrant Capillary Mechanics 13.2 Magnetic Particle Testing: Flux Leakage, Field Geometry & Prod Amperage 13.3 Radiographic Physics, Geometric Unsharpness, Density & IQI Sensitivity 13.4 Computed and Digital Radiography & Radiographic Discontinuity Interpretation 13.5 Acoustic Wave Mechanics, Refraction & Angle-Beam Sound-Path Geometry 13.6 AWS D1.1 Decibel Rating, Phased Array & Time-of-Flight Diffraction

15 Chapter 14: Brazing, Soldering & Industrial Welding Safety

14.1 Brazing Thermodynamics, Capillary Wetting Physics & Joint Clearance 14.2 AWS A5.8 Brazing Filler Metals, FB Fluxes & Industrial Heating Processes 14.3 Soldering Fundamentals, Flux Chemistries & Intermetallic Formation 14.4 Hierarchy of Controls, Electric Shock Physics & Industrial Ventilation 14.5 Fume Exposure Limits, Arc Radiation, Hot Work and Confined-Space Entry 14.6 Arc-Generated Toxic Gases, Moving-Equipment Hazards & TWA Exposure Calculation

16 Chapter 15: Structural Fabrication & AWS D1.1 Code Implementation

15.1 AWS D1.1 Scope, Prequalification Limits, Base-Metal Groups & Matching Filler 15.2 Prequalified Joint Details, Backing Systems & Joint Specification Verification 15.3 Thermal Cut Edges, Fit-Up Tolerances & Minimum Preheat Requirements 15.4 Preheat Application Zones, Measurement Instrumentation & Fabrication Audits 15.5 PWHT Fundamentals, D1.1 Thermal Cycles & Visual Acceptance Criteria 15.6 D1.1 Nondestructive Examination Protocols, PWHT Scheduling & Visual Audit Practice

17 Chapter 16: Welding Procedure Qualification (WPS & PQR) per ASME IX & AWS B2.1

16.1 PQR versus WPS Hierarchy, Qualification Workflow & Standard Procedures 16.2 Manufacturer Responsibility, Subcontracting Limits & Multi-Process Qualification 16.3 Essential, Supplementary Essential and Nonessential Variables with Heat Input Mechanics 16.4 Waveform-Controlled Power Sources, Appendix H & Heat-Input Compliance 16.5 P-Numbers, Group Numbers, F-Numbers & A-Numbers 16.6 QW-451 Mechanical Test Protocols & Procedure Qualification Test Evaluation

18 Chapter 17: Filler Metal Specifications, Selection & Consumable Control

17.1 AWS A5 Architecture: SMAW, GMAW/GTAW and FCAW Consumable Classifications 17.2 SAW Wire-Flux Systems, Alloy Pickup & PWHT Property Effects 17.3 Stainless Filler Specifications, Solidification Modes & Dissimilar-Metal Joints 17.4 AWS A5.10 Aluminum Filler Selection & Dilution and Ferrite-Number Calculations 17.5 Consumable Storage, Conditioning Envelopes & Atmospheric Exposure Limits 17.6 Low-Hydrogen Designators, the Yurioka Parameter & Preheat Sizing

19 Chapter 18: Welder Performance Qualification, Quality Management & Welding Economics

18.1 Welder Qualification Philosophy, Test Positions & Thickness and Diameter Ranges 18.2 F-Number Hierarchy, Operator Qualification & Continuity Requirements 18.3 ISO 3834, Welding Coordination, Inspection Test Plans & Equipment Validation 18.4 EN 10204 Material Certification, Traceability & Heat-Input Nonconformance Auditing 18.5 Weld Cost Anatomy, Deposition Rates, Operating Factor & the Overwelding Law 18.6 Economic Optimization Strategies & Fabrication Cost Comparison

13.6 AWS D1.1 Decibel Rating, Phased Array & Time-of-Flight Diffraction

Key Takeaways Explain This Topic AI

AWS D1.1 Clause 8 mandates straight-beam longitudinal screening for base metal laminations prior to angle-beam testing, and governs weld evaluation via the decibel rating system formula d = a - b - c, where indication level (a), reference level (b), and attenuation factor (c = 2(S - 1)) yield indication rating (d).

In the AWS D1.1 decibel rating system, a lower or negative indication rating (d) denotes a larger, more severe reflector, because less instrument gain is required to bring the echo to reference screen height.

Phased Array Ultrasonic Testing (PAUT) utilizes multi-element probes with computer-controlled focal laws to achieve electronic beam steering and sectorial S-scans (40° to 70°); Time-of-Flight Diffraction (TOFD) utilizes crack-tip diffraction physics to achieve sub-millimeter planar flaw height sizing independent of echo amplitude.

The AWS D1.1 indication rating combines indication level, reference level and an attenuation factor based on sound path, so the same signal amplitude yields a different rating at a different depth.

Ultrasonic testing is the preferred method for planar discontinuities such as cracks and incomplete fusion, which radiography detects poorly.

Last updated: September 2026

4. AWS D1.1 Decibel Rating System (Clause 8 / Clause 6)

AWS D1.1 governs structural weldment acceptance using a standardized Decibel Indication Rating System that eliminates subjective operator interpretation. AWS D1.1 INDICATION RATING FORMULATION

  • d = a - b - c
  • |
  • +--------------------------+--------------------------+
  • | | |
  • V V V
  • Indication Level (a) Reference Level (b) Attenuation Factor (c)

Instrument gain (dB) Instrument gain (dB) Sound path correction:

  • to bring flaw echo to bring 0.060" SDH c = 2 · (S - 1.0 in)
  • to reference height in IIW block to c = 0.08 · (S - 25 mm)

(e.g., 50% FSH). reference height.

Mathematical Formulation d = a − b − c d = a - b - c d = a − b − c

where:

a a a = Indication Level (dB): The calibrated instrument gain setting in decibels required to bring the peak reflection from the unknown discontinuity to the reference screen height (typically 50 % 50\% 50% or 40 % 40\% 40% of Full Screen Height, FSH, per WPS).

b b b = Reference Level (dB): The calibrated instrument gain setting in decibels required to bring the reflection from the 0.060 in 0.060\text{ in} 0.060 in ( 1.5 mm 1.5\text{ mm} 1.5 mm ) side-drilled hole (SDH) in an IIW Type 1 or 2 calibration block to the identical reference screen height at a known calibration sound path.

c c c = Attenuation Factor (dB): A mathematical deduction compensating for sound beam scattering and material attenuation as sound path distance increases beyond 1.0 in 1.0\text{ in} 1.0 in ( 25 mm 25\text{ mm} 25 mm ):

Inches: c = 2 × ( S − 1.0 ) c = 2 \times (S - 1.0) c = 2 × ( S − 1.0 ) , where S S S is the measured sound path length in inches. If S ≤ 1.0 in S \le 1.0\text{ in} S ≤ 1.0 in , c = 0 dB c = 0\text{ dB} c = 0 dB .

Millimeters: c = 0.08 × ( S − 25 ) c = 0.08 \times (S - 25) c = 0.08 × ( S − 25 ) , where S S S is the measured sound path length in millimeters. If S ≤ 25 mm S \le 25\text{ mm} S ≤ 25 mm , c = 0 dB c = 0\text{ dB} c = 0 dB .

d d d = Indication Rating (dB): The calculated decibel score evaluated against AWS D1.1 Table 8.2 (Statically Loaded Structures) or Table 8.3 (Cyclically Loaded Structures) .

Critical Core Principle: The Counter-Intuitive Decibel Scale In the AWS D1.1 rating formulation, a lower or negative d d d value represents a larger, more severe discontinuity . Proof: A massive crack reflects intense sound energy back to the transducer. The operator requires very little instrument gain ( a a a ) to push the echo to 50 % 50\% 50% screen height (e.g., a = 28 dB a = 28\text{ dB} a = 28 dB ). When subtracted from reference level b b b (e.g., b = 40 dB b = 40\text{ dB} b = 40 dB ), d = 28 − 40 − c = − 12 − c d = 28 - 40 - c = -12 - c d = 28 − 40 − c = − 12 − c , yielding a negative number. Conversely, a tiny pinhole pore reflects almost no energy; the operator must crank the instrument gain up to a = 65 dB a = 65\text{ dB} a = 65 dB , yielding a high positive rating ( d = + 20 dB d = +20\text{ dB} d = + 20 dB ). Under AWS D1.1, negative and low ratings trigger Class A (Rejectable Flaws) .

AWS D1.1 Indication Severity Classification

Severity Class Indication Category Inspection Action / Engineering Disposition

Class A Large Discontinuity Mandatory Rejection. Immediate excavation and repair regardless of indication length.

Class B Medium Discontinuity Acceptable only if length does not exceed 3 / 4 in 3/4\text{ in} 3/4 in ( 20 mm 20\text{ mm} 20 mm ); requires evaluation of separation spacing.

Class C Small Discontinuity Acceptable if length does not exceed 2 in 2\text{ in} 2 in ( 50 mm 50\text{ mm} 50 mm ) in middle half of weld; rejectable if near edges.

Class D Minor Discontinuity Acceptable without restriction regardless of length or location.

Calibration Blocks: IIW vs. DSC Blocks

IIW Block (International Institute of Welding): Universal standard calibration block. Type 1 contains a 4.0 in 4.0\text{ in} 4.0 in ( 100 mm 100\text{ mm} 100 mm ) radius curved surface, a 1.0 in 1.0\text{ in} 1.0 in ( 25 mm 25\text{ mm} 25 mm ) radius cutout, a 0.060 in 0.060\text{ in} 0.060 in ( 1.5 mm 1.5\text{ mm} 1.5 mm ) side-drilled hole, and graduated angle scales. Used to verify probe index point, refracted angle, horizontal linearity, and establish reference sensitivity level ( b b b ).

DSC Block (Distance and Sensitivity Calibration): Compact, lightweight field block containing 1.0 in 1.0\text{ in} 1.0 in ( 25 mm 25\text{ mm} 25 mm ) and 3.0 in 3.0\text{ in} 3.0 in ( 75 mm 75\text{ mm} 75 mm ) radii and side-drilled holes. Ideal for calibrating angle-beam sound path distance and sensitivity directly on high-elevation structural steel erection sites.

5. Advanced Ultrasonic Inspection: PAUT & TOFD

Modern welding quality control increasingly mandates advanced digital ultrasonic techniques that replace traditional single-crystal manual UT. PHASED ARRAY UT (PAUT) TIME-OF-FLIGHT DIFFRACTION (TOFD)

Electronic Sectorial Scan (S-Scan) Pitch-Catch Crack Tip Diffraction

  • Multi-Element Array Probe Transmitter (T) Receiver (R)
  • [||||||||||||||||] +-----+ +-----+
  • / | | | \ | T | | R |
  • / | | | \ +--+--+ +--+--+
  • 40° 50° 60° 70° 80° \ Lateral Wave (Creep) /
  • \____________________/
  • \ Upper Tip /
  • \ Diffraction /
  • \ * /
  • \ | Crack/
  • \ * /
  • \ Lower /
  • ======+======+======
  • Backwall Echo
  • 1. Phased Array Ultrasonic Testing (PAUT)

Hardware Architecture: Rather than a single piezoelectric element, a PAUT probe contains an array of discrete elements (typically 16, 32, 64, or 128 individual crystal strips), each pulsed independently through multichannel electronics.

Focal Laws: Computer-controlled pulsing introduces precise time delays (nanoseconds) across adjacent elements. Constructive wave interference steers the acoustic beam across a continuum of angles and focuses beam energy at specific depths ( Dynamic Depth Focusing, DDF ).

Sectorial Scan (S-Scan): A single stationary PAUT probe sweeps an angular fan of shear waves through the weld cross-section (e.g., sweeping from 40 ∘ to 70 ∘ 40^\circ\text{ to }70^\circ 4 0 ∘ to 7 0 ∘ ). This sweeps the entire weld root, sidewall fusion lines, and crown simultaneously without moving the probe forward and backward, capturing instantaneous cross-sectional data.

Electronic Scan (E-Scan / Linear Scan): Multiplexes groups of elements along the array length at a constant angle, simulating a rastering probe without mechanical movement.

2. Time-of-Flight Diffraction (TOFD)

Physics of Crack-Tip Diffraction: Traditional UT relies on specular reflection, which requires the acoustic beam to strike a smooth planar flaw perpendicularly. When sound strikes a sharp crack edge, the tip acts as an independent point source, scattering spherical diffracted waves in all directions.

Probe Configuration: TOFD utilizes an un-coupled pitch-catch arrangement where a dedicated Transmitter (T) and Receiver (R) probe straddle the weld seam on opposite sides.

Signal Train: The receiver captures four discrete chronological arrivals:

Lateral Wave: Creeps along the plate surface directly between probe tips (earliest arrival).

Upper Tip Diffracted Wave: Emanates from the top apex of the crack.

Lower Tip Diffracted Wave: Emanates from the bottom root of the crack (exhibiting phase inversion relative to upper tip).

Backwall Reflection: Specular reflection bouncing off the bottom plate surface.

Sub-Millimeter Flaw Height Sizing: By measuring the exact transit time difference between the upper tip ( t 1 t_1 t 1 ​ ) and lower tip ( t 2 t_2 t 2 ​ ), crack vertical depth ( d d d ) is calculated geometrically: d = ( c ⋅ t 2 ) 2 − s 2 d = \sqrt{ \left( \frac{c \cdot t}{2} \right)^2 - s^2 } d = ( 2 c ⋅ t ​ ) 2 − s 2 ​ where 2 s 2s 2 s is the probe center separation distance (PCS) and c c c is longitudinal velocity. This enables precise vertical flaw height sizing ( Δ h = d 2 − d 1 \Delta h = d_2 - d_1 Δ h = d 2 ​ − d 1 ​ ) with accuracy within ± 0.5 mm \pm 0.5\text{ mm} ± 0.5 mm , completely independent of signal echo amplitude .

TOFD Dead Zones: Near-surface dead zones exist directly beneath the plate surface (obscured by the high-amplitude lateral wave pulse), and backwall dead zones exist immediately above the bottom surface (obscured by the massive backwall reflection). Consequently, TOFD is frequently paired with PAUT to achieve 100 % 100\% 100% volumetric coverage.

  • 6. Worked Numerical Examples
  • Example 1: Calculating Refracted Angle in Steel via Snell's Law

Problem: A Lucite angle-beam wedge is manufactured with an internal incident angle θ 1 = 40.0 ∘ \theta_1 = 40.0^\circ θ 1 ​ = 40. 0 ∘ . The longitudinal velocity in the Lucite wedge is c wedge , L = 2730 m/s c_{\text{wedge}, L} = 2730\text{ m/s} c wedge , L ​ = 2730 m/s , and the transverse shear velocity in carbon steel is c steel , S = 3240 m/s c_{\text{steel}, S} = 3240\text{ m/s} c steel , S ​ = 3240 m/s .

Confirm whether the incident angle falls within the operational angle-beam window.

Calculate the exact refracted shear wave angle ( θ S 2 \theta_{S2} θ S 2 ​ ) in the steel plate.

Solution:

Step 1: Check Operational Angle-Beam Window

First critical angle: θ c 1 = arcsin ⁡ ( 2730 / 5900 ) ≈ 27.56 ∘ \theta_{c1} = \arcsin(2730 / 5900) \approx 27.56^\circ θ c 1 ​ = arcsin ( 2730/5900 ) ≈ 27.5 6 ∘ .

Second critical angle: θ c 2 = arcsin ⁡ ( 2730 / 3240 ) ≈ 57.42 ∘ \theta_{c2} = \arcsin(2730 / 3240) \approx 57.42^\circ θ c 2 ​ = arcsin ( 2730/3240 ) ≈ 57.4 2 ∘ .

Because 27.56 ∘ < 40.0 ∘ < 57.42 ∘ 27.56^\circ < 40.0^\circ < 57.42^\circ 27.5 6 ∘ < 40. 0 ∘ < 57.4 2 ∘ , longitudinal waves are completely eliminated, and only pure shear waves propagate into the steel.

Step 2: Apply Snell's Law for Shear Wave Refraction sin ⁡ ( θ 1 ) c wedge , L = sin ⁡ ( θ S 2 ) c steel , S \frac{\sin(\theta_1)}{c_{\text{wedge}, L}} = \frac{\sin(\theta_{S2})}{c_{\text{steel}, S}} c wedge , L ​ sin ( θ 1 ​ ) ​ = c steel , S ​ sin ( θ S 2 ​ ) ​ sin ⁡ ( θ S 2 ) = sin ⁡ ( 40.0 ∘ ) × ( c steel , S c wedge , L ) = 0.64279 × ( 3240 2730 ) = 0.64279 × 1.18681 = 0.76287 \sin(\theta_{S2}) = \sin(40.0^\circ) \times \left( \frac{c_{\text{steel}, S}}{c_{\text{wedge}, L}} \right) = 0.64279 \times \left( \frac{3240}{2730} \right) = 0.64279 \times 1.18681 = 0.76287 sin ( θ S 2 ​ ) = sin ( 40. 0 ∘ ) × ( c wedge , L ​ c steel , S ​ ​ ) = 0.64279 × ( 2730 3240 ​ ) = 0.64279 × 1.18681 = 0.76287 θ S 2 = arcsin ⁡ ( 0.76287 ) ≈ 49.7 ∘ \theta_{S2} = \arcsin(0.76287) \approx 49.7^\circ θ S 2 ​ = arcsin ( 0.76287 ) ≈ 49. 7 ∘

Engineering Evaluation: The wedge produces a refracted shear wave angle of 49.7 ∘ 49.7^\circ 49. 7 ∘ in carbon steel.

Example 2: AWS D1.1 Indication Rating ( d d d ) Sizing

Problem: An ultrasonic technician inspecting a 50 mm 50\text{ mm} 50 mm ( 2.0 in 2.0\text{ in} 2.0 in ) thick CJP groove weld in an AWS D1.1 statically loaded building frame detects an internal flaw using a 70 ∘ 70^\circ 7 0 ∘ angle-beam transducer ( 2.25 MHz 2.25\text{ MHz} 2.25 MHz ). The testing parameters are:

Indication Level ( a a a ): 46 dB 46\text{ dB} 46 dB (gain to bring flaw peak to 50 % 50\% 50% FSH)

Reference Level ( b b b ): 40 dB 40\text{ dB} 40 dB (gain to bring 0.060 in 0.060\text{ in} 0.060 in SDH in IIW block to 50 % 50\% 50% FSH)

Sound Path Distance ( S S S ): 4.5 inches 4.5\text{ inches} 4.5 inches ( 114.3 mm 114.3\text{ mm} 114.3 mm )

Calculate the Attenuation Factor ( c c c ), determine the Indication Rating ( d d d ), and identify the severity classification assuming the AWS D1.1 Table 8.2 criteria specifies that for this joint thickness, ratings of + 2 dB +2\text{ dB} + 2 dB and lower correspond to Class A (Rejectable).

Solution:

Step 1: Calculate Attenuation Factor ( c c c ) c = 2 × ( S − 1.0 ) = 2 × ( 4.5 − 1.0 ) = 2 × 3.5 = 7.0 dB c = 2 \times (S - 1.0) = 2 \times (4.5 - 1.0) = 2 \times 3.5 = 7.0\text{ dB} c = 2 × ( S − 1.0 ) = 2 × ( 4.5 − 1.0 ) = 2 × 3.5 = 7.0 dB

Step 2: Calculate Indication Rating ( d d d ) d = a − b − c = 46 dB − 40 dB − 7.0 dB = 6.0 − 7.0 = − 1.0 dB d = a - b - c = 46\text{ dB} - 40\text{ dB} - 7.0\text{ dB} = 6.0 - 7.0 = -1.0\text{ dB} d = a − b − c = 46 dB − 40 dB − 7.0 dB = 6.0 − 7.0 = − 1.0 dB

Step 3: Severity Evaluation

Because d = − 1.0 dB d = -1.0\text{ dB} d = − 1.0 dB , which is strictly less than + 2 dB +2\text{ dB} + 2 dB , the indication falls into Severity Class A (Large Discontinuity) .

Engineering Disposition: The flaw is rejected . The weld must be excavated, repaired, and re-examined.

  • 7. Industrial Scenarios & Certified Welding Engineer Exam Pitfalls
  • Real-World Engineering Failure Scenario

During the erection of a heavy box girder for a railway bridge, ultrasonic examination of a 40 mm 40\text{ mm} 40 mm thick web-to-flange CJP groove weld was executed without performing preliminary 0 ∘ 0^\circ 0 ∘ straight-beam base metal scanning. The angle-beam inspection showed zero indications, and the weld was stamped as code-compliant. During heavy freight train traffic eight months later, fatigue cracks ruptured through the web. Post-failure metallurgical investigation uncovered a massive internal mid-plane plate lamination spanning 450 mm 450\text{ mm} 450 mm adjacent to the weld toe. When the original angle-beam shear wave entered the plate, it struck the upper boundary of the lamination and bounced harmlessly into the top flange, completely missing a massive 8 mm 8\text{ mm} 8 mm incomplete sidewall fusion defect along the root. Had the technician executed the mandatory AWS D1.1 Clause 8 straight-beam screening, the lamination would have been identified immediately, preventing the false-negative stamp.

Common Exam Traps

Exam Trap 1: Decibel Sign Inversion in AWS D1.1 A major trap on the CWEng exam is assuming that a higher d d d number means a worse flaw (by analogy with optical density or stress). In the AWS D1.1 formula d = a − b − c d = a - b - c d = a − b − c , the lower the decibel rating, the larger and more hazardous the defect . A rating of − 4 dB -4\text{ dB} − 4 dB is far more severe than + 12 dB +12\text{ dB} + 12 dB . Candidates who rank flaws in ascending numerical order will fail classification questions.

Exam Trap 2: Sizing Accuracy of Amplitude vs. TOFD When an exam question asks which technique provides superior flaw height sizing accuracy in thick-wall weldments, avoid selecting "manual angle-beam peak amplitude matching" (such as the 6 dB 6\text{ dB} 6 dB or 20 dB 20\text{ dB} 20 dB drop methods). Amplitude drop methods are notoriously inaccurate due to beam spreading, flaw roughness, and orientation. Time-of-Flight Diffraction (TOFD) provides the highest sizing precision because it calculates flaw vertical extent from tip diffraction arrival times, completely independent of reflected beam amplitude.

Exam Trap 3: Shear Waves in Liquids Questions frequently ask why couplant is applied between the Lucite wedge and the steel plate rather than inside the transducer assembly, or whether shear waves can propagate through water. Remember that shear waves require resistance to shear strain ( G > 0 G > 0 G > 0 ). Transverse shear waves cannot propagate through liquids (water, oil, couplant) or gases . The wave propagating through the couplant film is always a longitudinal compression wave; shear mode conversion occurs exclusively upon entering the solid steel matrix.