Study guide

16.6 QW-451 Mechanical Test Protocols & Procedure Qualification Test Evaluation

AWS CWEng Certified Welding Engineer Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & CWEng Exam Overview

About the CWEng Exam: Four Parts, 163 Questions & Testing Logistics Scoring, Composite Weighting, Eligibility & Five-Year Renewal How to Use This Guide & Build Your Open-Book Reference Set

2 Chapter 1: Mathematics & Statistics for Welding Engineers

1.1 Engineering Mathematics: Algebra, Trigonometry & Geometry in Weldments 1.2 Differential & Integral Calculus Fundamentals in Engineering Analysis 1.3 Applied Engineering Statistics, Population Distributions & Quality Metrics 1.4 Polynomial Equations, Conic Sections & Complex Numbers

3 Chapter 2: Physics Fundamentals & Mechanics

2.1 Unit Systems, Dimensional Analysis & Engineering Conversions 2.2 Mechanics: Statics, Equilibrium, Force Vectors & Moments 2.3 Work, Energy, Power & Mechanical Advantage in Welding Systems 2.4 Thermal Physics, Linear/Volumetric Expansion & Heat Capacity

4 Chapter 3: General & Physical Chemistry for Welding

3.1 Atomic Structure, Bonding & Solid-Solution Thermodynamics 3.2 Hume-Rothery Compatibility, Interstitial Strain & HSLA Microalloy Scavenging 3.3 Gas Laws, Dalton Partial Pressures, Arc Dissociation & Sieverts Law 3.4 Cylinder Capacity, Available Arc Time & Gas-Related Porosity Diagnosis 3.5 Redox Thermodynamics, Deoxidation & Slag-Metal Refining 3.6 Basicity Index Calculations, Toughness Prediction & Cryogenic Consumable Selection

5 Chapter 4: Strength of Materials & Mechanics of Materials

4.1 Engineering vs. True Stress-Strain, Elastic Constants & Z-Direction Ductility 4.2 Plane Stress vs. Plane Strain, Triaxial Restraint & Alloy Property Comparison 4.3 Beam Bending, Transverse Shear, Torsion & Mohr Circle Construction 4.4 Multiaxial Yield Criteria & Combined-Load Analysis of Welded Members 4.5 Fatigue Life, Weld-Toe Stress Concentration & Paris-Erdogan Crack Growth 4.6 LEFM Fracture Toughness, Ductile-Brittle Transition & Larson-Miller Creep 4.7 Comparative Failure-Mode Synthesis & Integrated Flaw and Creep Assessment

6 Chapter 5: Heat Transfer & Fluid Mechanics in Welding

5.1 Fourier Conduction, Rosenthal Moving Heat Source & 2D vs. 3D Heat Flow 5.2 Adams Cooling Rate, the t8/5 Window & HAZ Peak-Temperature Distribution 5.3 Convection, Stefan-Boltzmann Radiation & Emissivity of Weld Surfaces 5.4 Arc Radiation Losses, Preheat Maintenance & PWHT Boundary Conditions 5.5 Fluid Statics, Bernoulli, Viscosity & Reynolds-Number Regimes 5.6 Gas Lens Mechanics, Buoyancy Effects & Torch Flow Design 5.7 Hyperbaric, Vacuum & Controlled-Atmosphere Welding Environments

7 Chapter 6: Electrical Engineering Principles for Welding Systems

6.1 DC and AC Waveforms, Polarity Thermodynamics & Welding Circuit Analysis 6.2 Joule Heating, Electrode Stickout Preheating & Circuit Voltage Distribution 6.3 Power Factor, Reactance, Impedance & Magnetic Transformer Principles 6.4 Lorentz Force, Electromagnetic Pinch Effect & Arc Blow

8 Chapter 7: Welding Heat Sources & Arc Physics

7.1 Volt-Ampere Characteristics, Operating Point, Self-Regulation & OCV Limits 7.2 Inductance, Slope Control & Dynamic Power-Source Response 7.3 Arc Fall Regions, Cathode Emission Mechanisms & Shielding-Gas Ionization 7.4 Maecker Plasma Jet, Degree of Ionization & Anode Heat Partitioning 7.5 Droplet Force Balance & Classification of Metal Transfer Regimes 7.6 Transition Current, Mode Comparison & Pulsed Waveform Design

9 Chapter 8: Arc Welding Processes & Parameter Controls

8.1 Shielded Metal Arc Welding (SMAW): Electrode Flux Chemistries & Variables 8.2 GMAW Process Physics, Transfer Modes & Shielding Gas Interactions 8.3 Solid, Metal-Cored & Flux-Cored Wires with CTWD and Parameter Envelopes 8.4 Gas Tungsten (GTAW) & Plasma Arc Welding (PAW): Electrodes & Keyholing 8.5 Submerged Arc Welding (SAW): Flux Basicity, Multi-Wire & High-Deposition Systems

10 Chapter 9: Advanced, Resistance & Solid-State Joining Processes

9.1 High-Energy-Density Beam Physics & Electron Beam Welding 9.2 Laser Beam Welding, EBW/LBW Comparison & Fiber Laser Parameter Derivation 9.3 Resistance Welding Physics, Electrode Materials & Spot Weld Sequence 9.4 Nugget Sizing, Seam and Projection Welding, and Lobe Curve Process Windows 9.5 Solid-State Joining: Friction Stir Welding (FSW), Explosion & Diffusion 9.6 Thermal Cutting & Gouging: Oxyfuel, Plasma Arc and Air Carbon Arc 9.7 High-Frequency, Flash, Stud & Ultrasonic Welding; Surfacing and Thermal Spray

11 Chapter 10: Physical & Transformation Metallurgy of Steels

10.1 Fe-Fe3C System, Crystal Lattices, c/a Ratio & Interstitial Solubility 10.2 Critical Temperatures, Invariant Reactions & the Lever Rule 10.3 Alloying Elements, the Gamma Loop & Phase-Fraction Calculations 10.4 TTT and CCT Diagrams, Constitutional Supercooling & Scheil Microsegregation 10.5 Non-Equilibrium Transformation Products & Martensite Modeling 10.6 HAZ Anatomy, Microstructural Sub-Zones & Multi-Pass Reheated Regions 10.7 HAZ Hardness Traverses, Toughness Gradients & Peak-Temperature Control

12 Chapter 11: Weldability, Cracking Mechanisms & Alloy Metallurgy

11.1 Hydrogen Cracking Conditions, Carbon Equivalent & Diffusible Hydrogen Control 11.2 Preheat, Interpass and Post-Heat Calculations for Cold-Crack Prevention 11.3 Solidification Cracking, Bead Aspect Ratio, Liquation & Lamellar Tearing 11.4 Lamellar Tearing Mitigation & Hot-Cracking Susceptibility Evaluation 11.5 Stainless Families, Schaeffler and WRC-1992 Diagrams, Ferrite Number & Sensitization 11.6 Duplex Stainless Metallurgy & Dissimilar-Metal Ferrite Prediction 11.7 Aluminum Oxide and Porosity Control, and Titanium Reactive-Metal Welding 11.8 Nickel Superalloys, Strain-Age Cracking & Guinier-Preston Aging Sequences

13 Chapter 12: Weldment Design, Stress Analysis & Joint Mechanics

12.1 AWS A2.4 Welding Symbol Anatomy, Symbol Library & Dimension Syntax 12.2 Joint Architecture, CJP versus PJP, and NDE Examination Symbols 12.3 Fillet and Groove Weld Sizing under Direct Stress in ASD and LRFD 12.4 Plug and Slot Welds, Stress Gradients & the Fillet Weld Break Test 12.5 Eccentric Loading Analysis: Elastic Vector Method vs Instantaneous Center 12.6 Fatigue Design of Welded Connections & Residual Stress/Distortion Control

14 Chapter 13: Non-Destructive Examination (NDE) & Discontinuity Analysis

13.1 Visual Testing Gages & Liquid Penetrant Capillary Mechanics 13.2 Magnetic Particle Testing: Flux Leakage, Field Geometry & Prod Amperage 13.3 Radiographic Physics, Geometric Unsharpness, Density & IQI Sensitivity 13.4 Computed and Digital Radiography & Radiographic Discontinuity Interpretation 13.5 Acoustic Wave Mechanics, Refraction & Angle-Beam Sound-Path Geometry 13.6 AWS D1.1 Decibel Rating, Phased Array & Time-of-Flight Diffraction

15 Chapter 14: Brazing, Soldering & Industrial Welding Safety

14.1 Brazing Thermodynamics, Capillary Wetting Physics & Joint Clearance 14.2 AWS A5.8 Brazing Filler Metals, FB Fluxes & Industrial Heating Processes 14.3 Soldering Fundamentals, Flux Chemistries & Intermetallic Formation 14.4 Hierarchy of Controls, Electric Shock Physics & Industrial Ventilation 14.5 Fume Exposure Limits, Arc Radiation, Hot Work and Confined-Space Entry 14.6 Arc-Generated Toxic Gases, Moving-Equipment Hazards & TWA Exposure Calculation

16 Chapter 15: Structural Fabrication & AWS D1.1 Code Implementation

15.1 AWS D1.1 Scope, Prequalification Limits, Base-Metal Groups & Matching Filler 15.2 Prequalified Joint Details, Backing Systems & Joint Specification Verification 15.3 Thermal Cut Edges, Fit-Up Tolerances & Minimum Preheat Requirements 15.4 Preheat Application Zones, Measurement Instrumentation & Fabrication Audits 15.5 PWHT Fundamentals, D1.1 Thermal Cycles & Visual Acceptance Criteria 15.6 D1.1 Nondestructive Examination Protocols, PWHT Scheduling & Visual Audit Practice

17 Chapter 16: Welding Procedure Qualification (WPS & PQR) per ASME IX & AWS B2.1

16.1 PQR versus WPS Hierarchy, Qualification Workflow & Standard Procedures 16.2 Manufacturer Responsibility, Subcontracting Limits & Multi-Process Qualification 16.3 Essential, Supplementary Essential and Nonessential Variables with Heat Input Mechanics 16.4 Waveform-Controlled Power Sources, Appendix H & Heat-Input Compliance 16.5 P-Numbers, Group Numbers, F-Numbers & A-Numbers 16.6 QW-451 Mechanical Test Protocols & Procedure Qualification Test Evaluation

18 Chapter 17: Filler Metal Specifications, Selection & Consumable Control

17.1 AWS A5 Architecture: SMAW, GMAW/GTAW and FCAW Consumable Classifications 17.2 SAW Wire-Flux Systems, Alloy Pickup & PWHT Property Effects 17.3 Stainless Filler Specifications, Solidification Modes & Dissimilar-Metal Joints 17.4 AWS A5.10 Aluminum Filler Selection & Dilution and Ferrite-Number Calculations 17.5 Consumable Storage, Conditioning Envelopes & Atmospheric Exposure Limits 17.6 Low-Hydrogen Designators, the Yurioka Parameter & Preheat Sizing

19 Chapter 18: Welder Performance Qualification, Quality Management & Welding Economics

18.1 Welder Qualification Philosophy, Test Positions & Thickness and Diameter Ranges 18.2 F-Number Hierarchy, Operator Qualification & Continuity Requirements 18.3 ISO 3834, Welding Coordination, Inspection Test Plans & Equipment Validation 18.4 EN 10204 Material Certification, Traceability & Heat-Input Nonconformance Auditing 18.5 Weld Cost Anatomy, Deposition Rates, Operating Factor & the Overwelding Law 18.6 Economic Optimization Strategies & Fabrication Cost Comparison

16.6 QW-451 Mechanical Test Protocols & Procedure Qualification Test Evaluation

Key Takeaways Explain This Topic AI

Transverse tension tests per QW-150 require weld specimens to meet the specified minimum tensile strength (SMTS) of the base metal, but allow a failure up to 5% below the SMTS if fracture occurs entirely in the base metal outside the weld.

Guided bend testing per QW-160 requires transverse root, face, or side bends evaluated on standard guided bend jigs (QW-466), rejecting any open surface discontinuity exceeding 1/8 in (3.2 mm) in any direction.

Charpy V-notch impact specimens per QW-170 must sample both weld metal centerline and heat-affected zone locations, meeting lateral expansion and absorbed energy criteria established by the referencing construction code.

The number and type of mechanical test specimens is set by the coupon thickness, and a thicker coupon generally qualifies a wider thickness range.

Reduced-section tension specimens must fail at or above the specified minimum tensile strength of the base metal, and the failure location is recorded but is not itself the acceptance criterion.

Last updated: September 2026

Mechanical Test Specimen Protocols (QW-202 & Table QW-451.1)

To qualify a groove weld procedure, ASME Section IX QW-202 mandates destructive testing of specimens machined from the welded coupon. For standard plate and pipe coupons, Table QW-451.1 dictates the specimen quantities: +------------------------------------+-------------------+-------------------+-------------------+

  • | Coupon Thickness (T) | Tension Specimens | Transverse Root/ | Transverse Side |
  • | | (QW-150) | Face Bends (QW-160)| Bends (QW-160) |
  • +------------------------------------+-------------------+-------------------+-------------------+
  • | T < 1/16 in (1.5 mm) | 2 | 2 Root, 2 Face | Not Permitted |
  • | 1/16 in <= T < 3/8 in (10 mm) | 2 | 2 Root, 2 Face | Permitted (alt) |
  • | 3/8 in <= T < 3/4 in (19 mm) | 2 | 2 Root, 2 Face | 4 Side Bends (rec)|
  • | T >= 3/4 in (19 mm) | 2 | Not Permitted | 4 Side Bends |

+------------------------------------+-------------------+-------------------+-------------------+ MECHANICAL TEST SPECIMEN EXTRACTION LAYOUT

  • +-------------------------------------------------------------------+
  • | Discard (Top 1.0 inch) |
  • +-------------------------------------------------------------------+
  • | [T-1] Transverse Reduced-Section Tension Specimen (QW-462.1) |
  • +-------------------------------------------------------------------+
  • | [S-1] Guided Transverse Side Bend Specimen (QW-462.2) |
  • +-------------------------------------------------------------------+
  • | [S-2] Guided Transverse Side Bend Specimen (QW-462.2) |
  • +-------------------------------------------------------------------+
  • | [CVN] Charpy V-Notch Impact Set (Weld Centerline & HAZ) |
  • +-------------------------------------------------------------------+
  • | [S-3] Guided Transverse Side Bend Specimen (QW-462.2) |
  • +-------------------------------------------------------------------+
  • | [S-4] Guided Transverse Side Bend Specimen (QW-462.2) |
  • +-------------------------------------------------------------------+
  • | [T-2] Transverse Reduced-Section Tension Specimen (QW-462.1) |
  • +-------------------------------------------------------------------+
  • | Discard (Bottom 1.0 inch) |
  • +-------------------------------------------------------------------+
  • 1. Transverse Tension Testing (QW-150)

Reduced-section tension specimens (QW-462.1) evaluate the ultimate tensile strength of the welded joint under uniaxial loading:

  • Cross-Sectional Area Calculation: A = W * T_specimen
  • Ultimate Tensile Stress: σ_u = P_max / A

Acceptance Criteria (QW-153.1):

Tensile Strength >= SMTS: The specimen must display an ultimate tensile strength not less than the Specified Minimum Tensile Strength (SMTS) of the base metal (listed in QW/QB-422).

Dissimilar Metals: When joining base metals of different tensile strengths, the specimen must meet or exceed the SMTS of the weaker base metal.

The 5% Rule (QW-153.1(d)): If the specimen breaks in the base metal outside of the weld and weld fusion boundary , the test is accepted as meeting the code requirements provided the calculated tensile strength is not more than 5% below the specified minimum tensile strength of the base metal.

Engineering Rationale for the 5% Rule: When a tension specimen necks down and fractures in the parent plate well away from the joint, it physically proves that the weld metal and heat-affected zone overmatched the base metal. Minor strength variations in the parent plate (up to 5% below nominal mill minimum) are accepted because the integrity of the welded joint itself has been proven superior to the adjacent base metal.

2. Guided Bend Testing (QW-160)

Guided bend specimens evaluate the soundness and ductility of the weld metal and fusion boundaries by straining the outer fibers in tension over a standardized plunger jig:

Specimen Types: Transverse Root Bends (root in tension), Transverse Face Bends (face in tension), Transverse Side Bends (entire cross-section strained across 3/8 in thickness), and Longitudinal Bends (used for dissimilar metals with large yield strength disparities per QW-161.5).

Jig Geometry (QW-466.1): Standard guided bend jigs utilize a plunger radius of A/2 = 2t (where t is specimen thickness, typically 3/8 in, resulting in plunger radius R_A = 0.75 in and die radius R_B = 1.3125 in). This imposes approximately 20% outer fiber strain.

Adjusted Bend Radius (QW-466.1 / QW-466.2): For low-ductility base metals having specified elongation E < 20%, the plunger dimension A is adjusted to prevent premature mechanical tearing: A = 100 × t E − t A = \frac{100 \times t}{E} - t A = E 100 × t ​ − t

Defect Acceptance Criteria (QW-163):

After bending through 180°, the convex surface of the specimen is examined for discontinuities:

Maximum Defect Size: The weld and HAZ shall have no open discontinuity exceeding 1/8 in (3.2 mm) measured in any direction.

Corner Cracks Disregarded: Cracks occurring on the corners of the specimen during bending are disregarded unless there is definite evidence that they result from lack of fusion, slag inclusions, or internal planar defects.

3. Charpy V-Notch Impact Testing (QW-170 / ASTM A370)

When notch toughness is mandated, impact testing evaluates resistance to brittle fracture under high-strain dynamic impact:

Specimen Dimensions: Standard full-size Charpy specimens measure 10 x 10 x 55 mm with a 2 mm deep 45° V-notch (R = 0.25 mm).

Notch Placement: Specimens must sample both the Weld Metal Centerline (WM) and the Heat-Affected Zone (HAZ) . HAZ specimens must be etched to locate the fusion boundary, with the notch precisely positioned at the fusion line (FL), FL + 1 mm, FL + 2 mm, or FL + 5 mm as specified by the construction code.

Acceptance Metrics: Minimum absorbed energy (ft-lbf or Joules) and lateral expansion (minimum 0.015 in / 0.38 mm for austenitic/nickel steels per Section VIII Division 1 UG-84).

  • Comprehensive Worked Engineering Example: PQR Mechanical Test Evaluation
  • Problem Statement

A welding engineer evaluates destructive mechanical test data from a procedure qualification coupon. The coupon is a 1.00 in (25.4 mm) thick plate of SA-516 Grade 70 (P-No 1 Group 2). Per ASME Section IX Table QW/QB-422, SA-516 Grade 70 has a Specified Minimum Tensile Strength of 70.0 ksi (485 MPa) .

Destructive testing produces the following laboratory data:

1. Tension Test Specimens (Reduced Section):

Specimen T-1: Width W = 0.752 in, Thickness T = 0.995 in, Maximum Load P1 = 53,200 lbf, Fracture Location: Weld metal (silky cup-and-cone).

Specimen T-2: Width W = 0.750 in, Thickness T = 1.002 in, Maximum Load P2 = 50,450 lbf, Fracture Location: Base metal, 1.4 in outside the fusion line.

2. Guided Side Bend Specimens (4 Side Bends, t = 0.375 in):

Specimen S-1: Zero open discontinuities.

Specimen S-2: One open pore measuring 0.06 in (1.5 mm).

Specimen S-3: One corner crack measuring 0.15 in (3.8 mm) with clean parent metal shear lip and no inclusion evidence.

Specimen S-4: One open fissure along the fusion line measuring 0.16 in (4.1 mm).

3. Charpy V-Notch Impact Specimens (Tested at -50°F, Code Mandate: 20 ft-lb avg, 15 ft-lb min):

  • Weld Metal: 28, 25, 22 ft-lbf (Average = 25.0 ft-lbf)
  • HAZ: 21, 14, 19 ft-lbf (Average = 18.0 ft-lbf)

Evaluate each test result against ASME Section IX and render a final PQR disposition. TENSION TEST SPECIMEN PROFILES & FRACTURE

  • Specimen T-1 (Broke in Weld Metal @ 71.1 ksi) Specimen T-2 (Broke in Base Metal @ 67.1 ksi)
  • +----------------------------------------------+ +----------------------------------------------+
  • | Base Metal | Weld | Base Metal | | Base Metal | Weld | Base Metal |
  • | | *** | | | * | | |
  • +-------------------|--***---|-----------------+ +-----------*-------|--------|-----------------+
  • Fracture Fracture (1.4" from weld)
  • (>= 70 ksi) (Within 5% Rule: >= 66.5 ksi)
  • Step-by-Step Evaluation
  • Step 1: Tension Specimen T-1 Evaluation
  • Cross-sectional area: A1 = W * T = 0.752 * 0.995 = 0.74824 sq in

Ultimate tensile strength: σ u , 1 = 53 , 200 lbf 0.74824 sq in = 71 , 101 psi = 71.1 ksi \sigma_{u,1} = \frac{53,200\text{ lbf}}{0.74824\text{ sq in}} = 71,101\text{ psi} = 71.1\text{ ksi} σ u , 1 ​ = 0.74824 sq in 53 , 200 lbf ​ = 71 , 101 psi = 71.1 ksi

Failure Location: Weld metal.

Code Requirement: Must be >= SMTS = 70.0 ksi.

Disposition: 71.1 ksi >= 70.0 ksi. PASS.

  • Step 2: Tension Specimen T-2 Evaluation
  • Cross-sectional area: A2 = W * T = 0.750 * 1.002 = 0.75150 sq in

Ultimate tensile strength: σ u , 2 = 50 , 450 lbf 0.75150 sq in = 67 , 132 psi = 67.1 ksi \sigma_{u,2} = \frac{50,450\text{ lbf}}{0.75150\text{ sq in}} = 67,132\text{ psi} = 67.1\text{ ksi} σ u , 2 ​ = 0.75150 sq in 50 , 450 lbf ​ = 67 , 132 psi = 67.1 ksi

Failure Location: Base metal, 1.4 inches outside weld.

Code Requirement per QW-153.1(d) (5% Rule): σ allowable = 0.95 × SMTS = 0.95 × 70.0 ksi = 66.5 ksi \sigma_{\text{allowable}} = 0.95 \times \text{SMTS} = 0.95 \times 70.0\text{ ksi} = 66.5\text{ ksi} σ allowable ​ = 0.95 × SMTS = 0.95 × 70.0 ksi = 66.5 ksi

Disposition: Because failure occurred in the base metal outside the weld and σ_u,2 (67.1 ksi) >= 66.5 ksi, Specimen T-2 is ACCEPTED per QW-153.1(d) .

Step 3: Guided Side Bend Evaluation

Specimen S-1: Zero defects. PASS.

Specimen S-2: Open pore = 0.06 in <= 1/8 in (0.125 in). PASS.

Specimen S-3: Corner crack = 0.15 in. Under QW-163, corner cracks are disregarded unless resulting from internal flaws. Visual examination confirmed clean shear tearing without slag or cold lap. PASS (Disregarded).

Specimen S-4: Open fusion line fissure = 0.16 in (4.1 mm). The discontinuity exceeds the maximum allowable limit of 1/8 in (0.125 in / 3.2 mm).

Disposition: Specimen S-4 FAILS per QW-163 .

Step 4: Charpy V-Notch Toughness Evaluation

Weld Metal: Average = 25.0 ft-lbf >= 20.0 ft-lbf; Individual minimum = 22.0 ft-lbf >= 15.0 ft-lbf. PASS.

HAZ: Average = 18.0 ft-lbf < 20.0 ft-lbf; Individual minimum = 14.0 ft-lbf < 15.0 ft-lbf. Both average and minimum fail code criteria.

Disposition: HAZ Toughness FAILS .

Overall PQR Disposition

PQR REJECTED. The procedure qualification fails due to lack of sidewall fusion on bend specimen S-4 and insufficient notch toughness in the heat-affected zone. Remedial engineering requires optimizing joint cleaning/groove angle to eliminate sidewall lack of fusion, and reducing arc heat input or lowering interpass temperature to refine the CGHAZ microstructure and restore Charpy impact toughness.

  • Industrial Scenarios & Certified Welding Engineer Exam Pitfalls
  • Real-World Field Disaster Scenario: The Cryogenic Tank Failure

A LNG satellite terminal installed a 3.5% nickel steel (P-No 9B) liquid ethylene storage tank. The contractor's welding engineer qualified the PQR on SA-203 Grade E plate. During tension testing, both specimens fractured in the weld metal at 68.2 ksi and 69.1 ksi against a specified minimum tensile strength of 70.0 ksi. The testing lab technician applied the "5% rule" and marked the tension tests as passing.

Two years later, during thermal cooldown, thermal contraction stresses induced joint failure across the under-strength weld seam, releasing 1,500 cubic meters of cryogenic liquid. The regulatory investigation revealed that the 5% reduction allowance applies strictly and exclusively to fractures occurring in the base metal outside the weld . When a specimen breaks in the weld metal, it must meet 100% of the SMTS (70.0 ksi). Applying the 5% rule to weld metal failure was a catastrophic misapplication of QW-153.1(d), which had masked severe weld metal undermatching.

Certified Welding Engineer Exam Pitfalls

Exam Trap 1: Misapplication of the 5% Tensile Rule The CWEng exam frequently presents a tension specimen breaking in the weld metal at 97% of the base metal SMTS (e.g., 68.0 ksi on a 70.0 ksi steel). Candidates frequently apply the 5% rule and mark the test as passing. This is an automatic failure. If the fracture occurs in the weld metal or fusion boundary, it must meet or exceed 100% of the SMTS. The 5% allowance is permitted only when fracture occurs entirely in the base metal outside the weld.

Exam Trap 2: Corner Cracks on Guided Bend Specimens An exam question will describe a guided bend specimen with a 5/32 in (4.0 mm) crack located precisely at the corner edge, with no evidence of internal slag or lack of fusion. Candidates often fail the specimen because 5/32 in exceeds 1/8 in. Per QW-163, corner cracks are explicitly disregarded unless evidence shows they originated from internal defects.

Exam Trap 3: P-No 1 Group Number Interchangeability When an exam question specifies an impact-tested vessel, candidates often assume that qualifying a procedure on SA-516 Grade 70 (Group 2) automatically qualifies SA-516 Grade 60 (Group 1). Under supplementary essential variable QW-403.5, Group Numbers are not interchangeable when impact testing is required.