Study guide
16.3 Essential, Supplementary Essential and Nonessential Variables with Heat Input Mechanics
AWS CWEng Certified Welding Engineer Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & CWEng Exam Overview
About the CWEng Exam: Four Parts, 163 Questions & Testing Logistics Scoring, Composite Weighting, Eligibility & Five-Year Renewal How to Use This Guide & Build Your Open-Book Reference Set
2 Chapter 1: Mathematics & Statistics for Welding Engineers
1.1 Engineering Mathematics: Algebra, Trigonometry & Geometry in Weldments 1.2 Differential & Integral Calculus Fundamentals in Engineering Analysis 1.3 Applied Engineering Statistics, Population Distributions & Quality Metrics 1.4 Polynomial Equations, Conic Sections & Complex Numbers
3 Chapter 2: Physics Fundamentals & Mechanics
2.1 Unit Systems, Dimensional Analysis & Engineering Conversions 2.2 Mechanics: Statics, Equilibrium, Force Vectors & Moments 2.3 Work, Energy, Power & Mechanical Advantage in Welding Systems 2.4 Thermal Physics, Linear/Volumetric Expansion & Heat Capacity
4 Chapter 3: General & Physical Chemistry for Welding
3.1 Atomic Structure, Bonding & Solid-Solution Thermodynamics 3.2 Hume-Rothery Compatibility, Interstitial Strain & HSLA Microalloy Scavenging 3.3 Gas Laws, Dalton Partial Pressures, Arc Dissociation & Sieverts Law 3.4 Cylinder Capacity, Available Arc Time & Gas-Related Porosity Diagnosis 3.5 Redox Thermodynamics, Deoxidation & Slag-Metal Refining 3.6 Basicity Index Calculations, Toughness Prediction & Cryogenic Consumable Selection
5 Chapter 4: Strength of Materials & Mechanics of Materials
4.1 Engineering vs. True Stress-Strain, Elastic Constants & Z-Direction Ductility 4.2 Plane Stress vs. Plane Strain, Triaxial Restraint & Alloy Property Comparison 4.3 Beam Bending, Transverse Shear, Torsion & Mohr Circle Construction 4.4 Multiaxial Yield Criteria & Combined-Load Analysis of Welded Members 4.5 Fatigue Life, Weld-Toe Stress Concentration & Paris-Erdogan Crack Growth 4.6 LEFM Fracture Toughness, Ductile-Brittle Transition & Larson-Miller Creep 4.7 Comparative Failure-Mode Synthesis & Integrated Flaw and Creep Assessment
6 Chapter 5: Heat Transfer & Fluid Mechanics in Welding
5.1 Fourier Conduction, Rosenthal Moving Heat Source & 2D vs. 3D Heat Flow 5.2 Adams Cooling Rate, the t8/5 Window & HAZ Peak-Temperature Distribution 5.3 Convection, Stefan-Boltzmann Radiation & Emissivity of Weld Surfaces 5.4 Arc Radiation Losses, Preheat Maintenance & PWHT Boundary Conditions 5.5 Fluid Statics, Bernoulli, Viscosity & Reynolds-Number Regimes 5.6 Gas Lens Mechanics, Buoyancy Effects & Torch Flow Design 5.7 Hyperbaric, Vacuum & Controlled-Atmosphere Welding Environments
7 Chapter 6: Electrical Engineering Principles for Welding Systems
6.1 DC and AC Waveforms, Polarity Thermodynamics & Welding Circuit Analysis 6.2 Joule Heating, Electrode Stickout Preheating & Circuit Voltage Distribution 6.3 Power Factor, Reactance, Impedance & Magnetic Transformer Principles 6.4 Lorentz Force, Electromagnetic Pinch Effect & Arc Blow
8 Chapter 7: Welding Heat Sources & Arc Physics
7.1 Volt-Ampere Characteristics, Operating Point, Self-Regulation & OCV Limits 7.2 Inductance, Slope Control & Dynamic Power-Source Response 7.3 Arc Fall Regions, Cathode Emission Mechanisms & Shielding-Gas Ionization 7.4 Maecker Plasma Jet, Degree of Ionization & Anode Heat Partitioning 7.5 Droplet Force Balance & Classification of Metal Transfer Regimes 7.6 Transition Current, Mode Comparison & Pulsed Waveform Design
9 Chapter 8: Arc Welding Processes & Parameter Controls
8.1 Shielded Metal Arc Welding (SMAW): Electrode Flux Chemistries & Variables 8.2 GMAW Process Physics, Transfer Modes & Shielding Gas Interactions 8.3 Solid, Metal-Cored & Flux-Cored Wires with CTWD and Parameter Envelopes 8.4 Gas Tungsten (GTAW) & Plasma Arc Welding (PAW): Electrodes & Keyholing 8.5 Submerged Arc Welding (SAW): Flux Basicity, Multi-Wire & High-Deposition Systems
10 Chapter 9: Advanced, Resistance & Solid-State Joining Processes
9.1 High-Energy-Density Beam Physics & Electron Beam Welding 9.2 Laser Beam Welding, EBW/LBW Comparison & Fiber Laser Parameter Derivation 9.3 Resistance Welding Physics, Electrode Materials & Spot Weld Sequence 9.4 Nugget Sizing, Seam and Projection Welding, and Lobe Curve Process Windows 9.5 Solid-State Joining: Friction Stir Welding (FSW), Explosion & Diffusion 9.6 Thermal Cutting & Gouging: Oxyfuel, Plasma Arc and Air Carbon Arc 9.7 High-Frequency, Flash, Stud & Ultrasonic Welding; Surfacing and Thermal Spray
11 Chapter 10: Physical & Transformation Metallurgy of Steels
10.1 Fe-Fe3C System, Crystal Lattices, c/a Ratio & Interstitial Solubility 10.2 Critical Temperatures, Invariant Reactions & the Lever Rule 10.3 Alloying Elements, the Gamma Loop & Phase-Fraction Calculations 10.4 TTT and CCT Diagrams, Constitutional Supercooling & Scheil Microsegregation 10.5 Non-Equilibrium Transformation Products & Martensite Modeling 10.6 HAZ Anatomy, Microstructural Sub-Zones & Multi-Pass Reheated Regions 10.7 HAZ Hardness Traverses, Toughness Gradients & Peak-Temperature Control
12 Chapter 11: Weldability, Cracking Mechanisms & Alloy Metallurgy
11.1 Hydrogen Cracking Conditions, Carbon Equivalent & Diffusible Hydrogen Control 11.2 Preheat, Interpass and Post-Heat Calculations for Cold-Crack Prevention 11.3 Solidification Cracking, Bead Aspect Ratio, Liquation & Lamellar Tearing 11.4 Lamellar Tearing Mitigation & Hot-Cracking Susceptibility Evaluation 11.5 Stainless Families, Schaeffler and WRC-1992 Diagrams, Ferrite Number & Sensitization 11.6 Duplex Stainless Metallurgy & Dissimilar-Metal Ferrite Prediction 11.7 Aluminum Oxide and Porosity Control, and Titanium Reactive-Metal Welding 11.8 Nickel Superalloys, Strain-Age Cracking & Guinier-Preston Aging Sequences
13 Chapter 12: Weldment Design, Stress Analysis & Joint Mechanics
12.1 AWS A2.4 Welding Symbol Anatomy, Symbol Library & Dimension Syntax 12.2 Joint Architecture, CJP versus PJP, and NDE Examination Symbols 12.3 Fillet and Groove Weld Sizing under Direct Stress in ASD and LRFD 12.4 Plug and Slot Welds, Stress Gradients & the Fillet Weld Break Test 12.5 Eccentric Loading Analysis: Elastic Vector Method vs Instantaneous Center 12.6 Fatigue Design of Welded Connections & Residual Stress/Distortion Control
14 Chapter 13: Non-Destructive Examination (NDE) & Discontinuity Analysis
13.1 Visual Testing Gages & Liquid Penetrant Capillary Mechanics 13.2 Magnetic Particle Testing: Flux Leakage, Field Geometry & Prod Amperage 13.3 Radiographic Physics, Geometric Unsharpness, Density & IQI Sensitivity 13.4 Computed and Digital Radiography & Radiographic Discontinuity Interpretation 13.5 Acoustic Wave Mechanics, Refraction & Angle-Beam Sound-Path Geometry 13.6 AWS D1.1 Decibel Rating, Phased Array & Time-of-Flight Diffraction
15 Chapter 14: Brazing, Soldering & Industrial Welding Safety
14.1 Brazing Thermodynamics, Capillary Wetting Physics & Joint Clearance 14.2 AWS A5.8 Brazing Filler Metals, FB Fluxes & Industrial Heating Processes 14.3 Soldering Fundamentals, Flux Chemistries & Intermetallic Formation 14.4 Hierarchy of Controls, Electric Shock Physics & Industrial Ventilation 14.5 Fume Exposure Limits, Arc Radiation, Hot Work and Confined-Space Entry 14.6 Arc-Generated Toxic Gases, Moving-Equipment Hazards & TWA Exposure Calculation
16 Chapter 15: Structural Fabrication & AWS D1.1 Code Implementation
15.1 AWS D1.1 Scope, Prequalification Limits, Base-Metal Groups & Matching Filler 15.2 Prequalified Joint Details, Backing Systems & Joint Specification Verification 15.3 Thermal Cut Edges, Fit-Up Tolerances & Minimum Preheat Requirements 15.4 Preheat Application Zones, Measurement Instrumentation & Fabrication Audits 15.5 PWHT Fundamentals, D1.1 Thermal Cycles & Visual Acceptance Criteria 15.6 D1.1 Nondestructive Examination Protocols, PWHT Scheduling & Visual Audit Practice
17 Chapter 16: Welding Procedure Qualification (WPS & PQR) per ASME IX & AWS B2.1
16.1 PQR versus WPS Hierarchy, Qualification Workflow & Standard Procedures 16.2 Manufacturer Responsibility, Subcontracting Limits & Multi-Process Qualification 16.3 Essential, Supplementary Essential and Nonessential Variables with Heat Input Mechanics 16.4 Waveform-Controlled Power Sources, Appendix H & Heat-Input Compliance 16.5 P-Numbers, Group Numbers, F-Numbers & A-Numbers 16.6 QW-451 Mechanical Test Protocols & Procedure Qualification Test Evaluation
18 Chapter 17: Filler Metal Specifications, Selection & Consumable Control
17.1 AWS A5 Architecture: SMAW, GMAW/GTAW and FCAW Consumable Classifications 17.2 SAW Wire-Flux Systems, Alloy Pickup & PWHT Property Effects 17.3 Stainless Filler Specifications, Solidification Modes & Dissimilar-Metal Joints 17.4 AWS A5.10 Aluminum Filler Selection & Dilution and Ferrite-Number Calculations 17.5 Consumable Storage, Conditioning Envelopes & Atmospheric Exposure Limits 17.6 Low-Hydrogen Designators, the Yurioka Parameter & Preheat Sizing
19 Chapter 18: Welder Performance Qualification, Quality Management & Welding Economics
18.1 Welder Qualification Philosophy, Test Positions & Thickness and Diameter Ranges 18.2 F-Number Hierarchy, Operator Qualification & Continuity Requirements 18.3 ISO 3834, Welding Coordination, Inspection Test Plans & Equipment Validation 18.4 EN 10204 Material Certification, Traceability & Heat-Input Nonconformance Auditing 18.5 Weld Cost Anatomy, Deposition Rates, Operating Factor & the Overwelding Law 18.6 Economic Optimization Strategies & Fabrication Cost Comparison
16.3 Essential, Supplementary Essential and Nonessential Variables with Heat Input Mechanics
Key Takeaways Explain This Topic AI
Essential variables (QW-250 series) govern the mechanical strength and ductility of the weldment; any change beyond the qualified limits mandates full procedure requalification and a new supporting PQR.
Supplementary essential variables (QW-409/QW-410) apply exclusively when the referencing construction code (e.g., ASME Section VIII Div 1 UCS-66, ASME B31.3) mandates notch toughness; they restrict variables affecting cooling rate such as heat input, interpass temperature, and travel technique.
Nonessential variables affect bead geometry, productivity, and workmanship without impairing mechanical properties; they may be updated on the production WPS through engineering revision without retesting or revising the PQR.
Standard arc heat input is calculated as H = (60 * V * I) / (1000 * S) in kJ/in or kJ/mm; excessive heat input causes coarse grain heat-affected zone (CGHAZ) embrittlement, while insufficient heat input risks hydrogen-induced cracking and lack of fusion.
Last updated: September 2026
16.2 ASME Section IX Variables: Essential, Supplementary Essential & Nonessential
Quick Answer: ASME Section IX categorizes procedure qualification variables into three distinct classes: Essential Variables (which govern tensile strength and ductility, requiring PQR requalification if changed beyond code limits), Supplementary Essential Variables (which govern notch toughness and become legally active only when the referencing construction code mandates impact testing), and Nonessential Variables (which govern workmanship, arc operation, or bead appearance and can be changed on the WPS without requalification). Process-specific tables (QW-253 for SMAW, QW-254 for SAW, QW-255 for GMAW/FCAW, and QW-256 for GTAW) delineate these requirements. Heat input (H = (60 * V * I) / (1000 * S)) directly dictates weld thermal cycle and cooling rate (t_8/5); for modern pulsed and waveform-controlled power sources, ASME Section IX Appendix H forbids simple average meter multiplication and mandates instantaneous power or energy integration to safeguard against notch toughness degradation.
The Tripartite Classification of Welding Variables
In ASME Section IX, welding variables are systematically categorized to balance structural safety with manufacturing flexibility. When a welding engineer writes or revises a Welding Procedure Specification (WPS), every parameter modification must be evaluated against the variable classifications defined in Article II (QW-250 series) and Article IV (QW-400 series) . ASME SECTION IX VARIABLE TAXONOMY
- +---------------------------------------------------------------------------------------+
- | WELDING VARIABLES |
- +---------------------------+---------------------------+-------------------------------+
- | ESSENTIAL VARIABLES | SUPPLEMENTARY ESSENTIAL | NONESSENTIAL VARIABLES |
- | (QW-250) | VARIABLES | (QW-250) |
- +---------------------------+---------------------------+-------------------------------+
- | - Governs Tensile & Bend | - Governs Notch Toughness | - Governs Workmanship |
- | - Base Metal P-Number | - Active ONLY when code | - Joint groove angle & root |
- | - Filler Metal F-No/A-No | mandates impact test | - Tungsten electrode size |
- | - Deposit thickness t | - Heat Input (QW-409.1) | - Shielding gas cup size |
- | - PWHT status (QW-407) | - Interpass temp (+100°F) | - Peening / Backing type |
- | - Process / Mode changes | - Vertical progression | - Stringer vs Weave bead |
- +---------------------------+---------------------------+-------------------------------+
- | REQUIRES NEW PQR TEST | REQUIRES NEW PQR TEST | WPS REVISION ONLY (NO TEST) |
- | IF CHANGED BEYOND LIMITS | IF TOUGHNESS MANDATED | NO REQUALIFICATION REQUIRED |
- +---------------------------+---------------------------+-------------------------------+
- 1. Essential Variables
Per ASME Section IX QW-401.1, an essential variable is a condition in which a change is considered to affect the mechanical properties (other than notch toughness) of the weldment. If an essential variable is altered beyond the qualified limits specified in the applicable QW-250 table, the WPS cannot simply be amended. The procedure must be requalified by welding a new test coupon, performing destructive testing, and certifying a new PQR .
Key Examples: Changing the base metal P-Number (QW-403.11), changing the filler metal F-Number (QW-404.4) or A-Number (QW-404.5), exceeding the qualified thickness range (QW-403.8), changing the welding process (QW-401), or altering Postweld Heat Treatment (PWHT) conditions (QW-407.1).
2. Supplementary Essential Variables
Per ASME Section IX QW-401.3, a supplementary essential variable is a condition in which a change will affect the notch toughness properties of a weldment. Supplementary essential variables exhibit a unique legal dual-status:
Conditional Activation: They are dormant unless the referencing construction code (e.g., ASME Section VIII Division 1 Part UCS-66, ASME Section III, or ASME B31.3 Chapter III) mandates Charpy V-notch (CVN) impact testing for low-temperature or critical fracture service.
Legal Transformation: When impact testing is invoked by the construction code, all supplementary essential variables listed in the QW-250 tables automatically transform into essential variables . Any change beyond their qualified limits mandates welding a new test coupon with impact testing to establish a new PQR.
Key Examples: An increase in arc heat input (QW-409.1), an increase in interpass temperature greater than 100°F (55°C) above that recorded on the PQR (QW-406.3), a change in base metal Group Number within a P-Number (QW-403.5), or a change from vertical uphill to vertical downhill progression (QW-405.2).
3. Nonessential Variables
Per ASME Section IX QW-401.2, a nonessential variable is a condition in which a change may be made in the WPS without requalification. These variables influence weld puddle control, deposition rate, penetration profile, and bead appearance, but do not impair the tensile strength, ductility, or toughness of a sound weld.
WPS Amendment: The welding engineer may alter nonessential variables directly on the production WPS through an engineering revision without welding a new coupon or revising the PQR.
Key Examples: Modifying root opening or groove angle (QW-402.1), changing shielding gas cup size (QW-408.8), changing the diameter of a GTAW tungsten electrode (QW-404.14), or changing between stringer and weave beads (when toughness is not required) (QW-410.9).
Process-Specific Variable Comparison Matrix
The table below synthesizes the governing variables across four primary welding processes: Shielded Metal Arc Welding (SMAW, QW-253), Submerged Arc Welding (SAW, QW-254), Gas Metal Arc / Flux Cored Arc Welding (GMAW/FCAW, QW-255), and Gas Tungsten Arc Welding (GTAW, QW-256). +-----------------------+-------------------+-------------------+-------------------+-------------------+
- | VARIABLE CATEGORY | SMAW (QW-253) | SAW (QW-254) | GMAW/FCAW (QW-255)| GTAW (QW-256) |
- +-----------------------+-------------------+-------------------+-------------------+-------------------+
- | Base Metal P-Number | Essential | Essential | Essential | Essential |
- | Base Metal Group-No | Supp. Essential | Supp. Essential | Supp. Essential | Supp. Essential |
- | Base Metal Thickness | Essential (QW-451)| Essential (QW-451)| Essential (QW-451)| Essential (QW-451)|
- | Filler Metal F-Number | Essential | Essential | Essential | Essential |
- | Filler Metal A-Number | Essential | Essential | Essential | Essential |
- | Transfer Mode | N/A | N/A | Essential (QW-409)| N/A |
- | Preheat Decrease >100F| Essential | Essential | Essential | Essential |
- | Interpass Incr. >100F | Supp. Essential | Supp. Essential | Supp. Essential | Supp. Essential |
- | PWHT Omission/Addition| Essential | Essential | Essential | Essential |
- | Shielding Gas Mix | N/A | N/A | Essential | Essential |
- | Heat Input Increase | Supp. Essential | Supp. Essential | Supp. Essential | Supp. Essential |
- | Vertical Progression | Supp. Essential | N/A | Supp. Essential | Supp. Essential |
- | Groove Geometry | Nonessential | Nonessential | Nonessential | Nonessential |
- | Cleaning Method | Nonessential | Nonessential | Nonessential | Nonessential |
- +-----------------------+-------------------+-------------------+-------------------+-------------------+
- The GMAW Transfer Mode Distinction (QW-409.2)
Under Table QW-255 for Gas Metal Arc Welding, QW-409.2 dictates that a change from spray transfer, pulsed spray, or globular transfer to short-circuiting transfer (GMAW-S) , or vice versa, is an essential variable . This rule exists because short-circuiting transfer operates at substantially lower arc energy, creating an acute metallurgical propensity for incomplete side-wall fusion ("cold lap"). Consequently, a PQR qualified in spray arc transfer cannot support a production WPS utilizing short-circuiting arc transfer.
Arc Heat Input Mechanics & Cooling Rate Metallurgical Dynamics
Arc heat input represents the quantity of thermal energy delivered to the weldment per unit length of travel. In procedure qualification, controlling heat input is essential for preserving the fracture toughness and microstructure of both the weld metal and the Heat-Affected Zone (HAZ) .
Mathematical Formulation
Standard heat input (H) is calculated according to the foundational relationship: H = 60 × V × I 1000 × S H = \frac{60 \times V \times I}{1000 \times S} H = 1000 × S 60 × V × I
Where:
H = Arc heat input in kilojoules per inch (kJ/in) [or kJ/mm when travel speed is entered in mm/min].
V = Arc voltage in volts (V).
I = Welding current in amperes (A).
S = Arc travel speed in inches per minute (in/min) [or mm/min].
60 = Conversion constant relating minutes to seconds.
1000 = Conversion constant relating Joules to kilojoules.
To determine the net heat input (H_net) transferred into the steel, the calculated arc energy is multiplied by the process thermal efficiency factor (arc efficiency η): H net = η × H H_{\text{net}} = \eta \times H H net = η × H
Typical arc efficiency factors (η) recognized in international welding engineering standards:
- Submerged Arc Welding (SAW): η ≈ 0.90 – 1.00 (flux blanket traps thermal radiation)
- Shielded Metal Arc Welding (SMAW): η ≈ 0.75 – 0.85
- Gas Metal Arc / FCAW: η ≈ 0.80 – 0.85
- Gas Tungsten Arc Welding (GTAW): η ≈ 0.60 – 0.70 (high thermal loss to water-cooled torch)
- Thermal Cycle and Cooling Time (t_8/5)
The rate of heat dissipation between 800°C and 500°C—designated as the t_8/5 cooling time —governs the solid-state phase transformation of austenite in carbon and low-alloy steels. The relationship between heat input and cooling rate is expressed by Rosenthal's conductive heat flow equations:
For 2D Heat Flow (Thin Plate): t 8 / 5 ∝ H 2 d 2 × ( T interpass − T 0 ) 2 t_{8/5} \propto \frac{H^2}{d^2 \times (T_{\text{interpass}} - T_0)^2} t 8/5 ∝ d 2 × ( T interpass − T 0 ) 2 H 2
For 3D Heat Flow (Thick Plate): t 8 / 5 ∝ H 2 π k × ( T interpass − T 0 ) t_{8/5} \propto \frac{H}{2\pi k \times (T_{\text{interpass}} - T_0)} t 8/5 ∝ 2 πk × ( T interpass − T 0 ) H
Where d is plate thickness, k is thermal conductivity, and T_0 is initial plate temperature. THE HEAT INPUT OPERATING WINDOW
- LOW HEAT INPUT HIGH HEAT INPUT
- (< 15 kJ/in / 0.6 kJ/mm) (> 60 kJ/in / 2.4 kJ/mm)
- +---------------------------+--------------------------------------+---------------------------+
- | - Ultra-rapid quench | OPTIMAL METALLURGICAL | - Extremely slow cooling |
- | - Hard Martensitic HAZ | OPERATING WINDOW | - Austenite grain growth |
- | - Peak Hardness > 350 HV | | - Coarse upper bainite |
- | - Hydrogen Cold Cracking | - Acicular ferrite weld metal | - Low CVN absorbed energy |
- | - Lack of fusion risks | - Refined, tough CGHAZ | - Yield strength drop |
- +---------------------------+--------------------------------------+---------------------------+
- The Metallurgical Hazards of Uncontrolled Heat Input
Excessive Heat Input (H > H_PQR): Delivers prolonged exposure above the A3 transformation temperature, driving extreme grain growth in the Coarse Grain HAZ (CGHAZ) directly adjacent to the fusion boundary. The resulting microstructure transforms into coarse upper bainite and grain boundary ferrite networks, precipitating a severe collapse in Charpy V-notch absorbed energy and elevating the ductile-to-brittle transition temperature (DBTT).
Insufficient Heat Input (H << H_PQR): Induces rapid cooling rates equivalent to a water quench. In steels with moderate carbon equivalent (CE_IIW > 0.40), austenite transforms into untempered high-carbon martensite. In the presence of residual tensile restraint and diffusible hydrogen, this brittle structure triggers Hydrogen-Induced Cold Cracking (HIC) .