Study guide
16.1 PQR versus WPS Hierarchy, Qualification Workflow & Standard Procedures
AWS CWEng Certified Welding Engineer Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & CWEng Exam Overview
About the CWEng Exam: Four Parts, 163 Questions & Testing Logistics Scoring, Composite Weighting, Eligibility & Five-Year Renewal How to Use This Guide & Build Your Open-Book Reference Set
2 Chapter 1: Mathematics & Statistics for Welding Engineers
1.1 Engineering Mathematics: Algebra, Trigonometry & Geometry in Weldments 1.2 Differential & Integral Calculus Fundamentals in Engineering Analysis 1.3 Applied Engineering Statistics, Population Distributions & Quality Metrics 1.4 Polynomial Equations, Conic Sections & Complex Numbers
3 Chapter 2: Physics Fundamentals & Mechanics
2.1 Unit Systems, Dimensional Analysis & Engineering Conversions 2.2 Mechanics: Statics, Equilibrium, Force Vectors & Moments 2.3 Work, Energy, Power & Mechanical Advantage in Welding Systems 2.4 Thermal Physics, Linear/Volumetric Expansion & Heat Capacity
4 Chapter 3: General & Physical Chemistry for Welding
3.1 Atomic Structure, Bonding & Solid-Solution Thermodynamics 3.2 Hume-Rothery Compatibility, Interstitial Strain & HSLA Microalloy Scavenging 3.3 Gas Laws, Dalton Partial Pressures, Arc Dissociation & Sieverts Law 3.4 Cylinder Capacity, Available Arc Time & Gas-Related Porosity Diagnosis 3.5 Redox Thermodynamics, Deoxidation & Slag-Metal Refining 3.6 Basicity Index Calculations, Toughness Prediction & Cryogenic Consumable Selection
5 Chapter 4: Strength of Materials & Mechanics of Materials
4.1 Engineering vs. True Stress-Strain, Elastic Constants & Z-Direction Ductility 4.2 Plane Stress vs. Plane Strain, Triaxial Restraint & Alloy Property Comparison 4.3 Beam Bending, Transverse Shear, Torsion & Mohr Circle Construction 4.4 Multiaxial Yield Criteria & Combined-Load Analysis of Welded Members 4.5 Fatigue Life, Weld-Toe Stress Concentration & Paris-Erdogan Crack Growth 4.6 LEFM Fracture Toughness, Ductile-Brittle Transition & Larson-Miller Creep 4.7 Comparative Failure-Mode Synthesis & Integrated Flaw and Creep Assessment
6 Chapter 5: Heat Transfer & Fluid Mechanics in Welding
5.1 Fourier Conduction, Rosenthal Moving Heat Source & 2D vs. 3D Heat Flow 5.2 Adams Cooling Rate, the t8/5 Window & HAZ Peak-Temperature Distribution 5.3 Convection, Stefan-Boltzmann Radiation & Emissivity of Weld Surfaces 5.4 Arc Radiation Losses, Preheat Maintenance & PWHT Boundary Conditions 5.5 Fluid Statics, Bernoulli, Viscosity & Reynolds-Number Regimes 5.6 Gas Lens Mechanics, Buoyancy Effects & Torch Flow Design 5.7 Hyperbaric, Vacuum & Controlled-Atmosphere Welding Environments
7 Chapter 6: Electrical Engineering Principles for Welding Systems
6.1 DC and AC Waveforms, Polarity Thermodynamics & Welding Circuit Analysis 6.2 Joule Heating, Electrode Stickout Preheating & Circuit Voltage Distribution 6.3 Power Factor, Reactance, Impedance & Magnetic Transformer Principles 6.4 Lorentz Force, Electromagnetic Pinch Effect & Arc Blow
8 Chapter 7: Welding Heat Sources & Arc Physics
7.1 Volt-Ampere Characteristics, Operating Point, Self-Regulation & OCV Limits 7.2 Inductance, Slope Control & Dynamic Power-Source Response 7.3 Arc Fall Regions, Cathode Emission Mechanisms & Shielding-Gas Ionization 7.4 Maecker Plasma Jet, Degree of Ionization & Anode Heat Partitioning 7.5 Droplet Force Balance & Classification of Metal Transfer Regimes 7.6 Transition Current, Mode Comparison & Pulsed Waveform Design
9 Chapter 8: Arc Welding Processes & Parameter Controls
8.1 Shielded Metal Arc Welding (SMAW): Electrode Flux Chemistries & Variables 8.2 GMAW Process Physics, Transfer Modes & Shielding Gas Interactions 8.3 Solid, Metal-Cored & Flux-Cored Wires with CTWD and Parameter Envelopes 8.4 Gas Tungsten (GTAW) & Plasma Arc Welding (PAW): Electrodes & Keyholing 8.5 Submerged Arc Welding (SAW): Flux Basicity, Multi-Wire & High-Deposition Systems
10 Chapter 9: Advanced, Resistance & Solid-State Joining Processes
9.1 High-Energy-Density Beam Physics & Electron Beam Welding 9.2 Laser Beam Welding, EBW/LBW Comparison & Fiber Laser Parameter Derivation 9.3 Resistance Welding Physics, Electrode Materials & Spot Weld Sequence 9.4 Nugget Sizing, Seam and Projection Welding, and Lobe Curve Process Windows 9.5 Solid-State Joining: Friction Stir Welding (FSW), Explosion & Diffusion 9.6 Thermal Cutting & Gouging: Oxyfuel, Plasma Arc and Air Carbon Arc 9.7 High-Frequency, Flash, Stud & Ultrasonic Welding; Surfacing and Thermal Spray
11 Chapter 10: Physical & Transformation Metallurgy of Steels
10.1 Fe-Fe3C System, Crystal Lattices, c/a Ratio & Interstitial Solubility 10.2 Critical Temperatures, Invariant Reactions & the Lever Rule 10.3 Alloying Elements, the Gamma Loop & Phase-Fraction Calculations 10.4 TTT and CCT Diagrams, Constitutional Supercooling & Scheil Microsegregation 10.5 Non-Equilibrium Transformation Products & Martensite Modeling 10.6 HAZ Anatomy, Microstructural Sub-Zones & Multi-Pass Reheated Regions 10.7 HAZ Hardness Traverses, Toughness Gradients & Peak-Temperature Control
12 Chapter 11: Weldability, Cracking Mechanisms & Alloy Metallurgy
11.1 Hydrogen Cracking Conditions, Carbon Equivalent & Diffusible Hydrogen Control 11.2 Preheat, Interpass and Post-Heat Calculations for Cold-Crack Prevention 11.3 Solidification Cracking, Bead Aspect Ratio, Liquation & Lamellar Tearing 11.4 Lamellar Tearing Mitigation & Hot-Cracking Susceptibility Evaluation 11.5 Stainless Families, Schaeffler and WRC-1992 Diagrams, Ferrite Number & Sensitization 11.6 Duplex Stainless Metallurgy & Dissimilar-Metal Ferrite Prediction 11.7 Aluminum Oxide and Porosity Control, and Titanium Reactive-Metal Welding 11.8 Nickel Superalloys, Strain-Age Cracking & Guinier-Preston Aging Sequences
13 Chapter 12: Weldment Design, Stress Analysis & Joint Mechanics
12.1 AWS A2.4 Welding Symbol Anatomy, Symbol Library & Dimension Syntax 12.2 Joint Architecture, CJP versus PJP, and NDE Examination Symbols 12.3 Fillet and Groove Weld Sizing under Direct Stress in ASD and LRFD 12.4 Plug and Slot Welds, Stress Gradients & the Fillet Weld Break Test 12.5 Eccentric Loading Analysis: Elastic Vector Method vs Instantaneous Center 12.6 Fatigue Design of Welded Connections & Residual Stress/Distortion Control
14 Chapter 13: Non-Destructive Examination (NDE) & Discontinuity Analysis
13.1 Visual Testing Gages & Liquid Penetrant Capillary Mechanics 13.2 Magnetic Particle Testing: Flux Leakage, Field Geometry & Prod Amperage 13.3 Radiographic Physics, Geometric Unsharpness, Density & IQI Sensitivity 13.4 Computed and Digital Radiography & Radiographic Discontinuity Interpretation 13.5 Acoustic Wave Mechanics, Refraction & Angle-Beam Sound-Path Geometry 13.6 AWS D1.1 Decibel Rating, Phased Array & Time-of-Flight Diffraction
15 Chapter 14: Brazing, Soldering & Industrial Welding Safety
14.1 Brazing Thermodynamics, Capillary Wetting Physics & Joint Clearance 14.2 AWS A5.8 Brazing Filler Metals, FB Fluxes & Industrial Heating Processes 14.3 Soldering Fundamentals, Flux Chemistries & Intermetallic Formation 14.4 Hierarchy of Controls, Electric Shock Physics & Industrial Ventilation 14.5 Fume Exposure Limits, Arc Radiation, Hot Work and Confined-Space Entry 14.6 Arc-Generated Toxic Gases, Moving-Equipment Hazards & TWA Exposure Calculation
16 Chapter 15: Structural Fabrication & AWS D1.1 Code Implementation
15.1 AWS D1.1 Scope, Prequalification Limits, Base-Metal Groups & Matching Filler 15.2 Prequalified Joint Details, Backing Systems & Joint Specification Verification 15.3 Thermal Cut Edges, Fit-Up Tolerances & Minimum Preheat Requirements 15.4 Preheat Application Zones, Measurement Instrumentation & Fabrication Audits 15.5 PWHT Fundamentals, D1.1 Thermal Cycles & Visual Acceptance Criteria 15.6 D1.1 Nondestructive Examination Protocols, PWHT Scheduling & Visual Audit Practice
17 Chapter 16: Welding Procedure Qualification (WPS & PQR) per ASME IX & AWS B2.1
16.1 PQR versus WPS Hierarchy, Qualification Workflow & Standard Procedures 16.2 Manufacturer Responsibility, Subcontracting Limits & Multi-Process Qualification 16.3 Essential, Supplementary Essential and Nonessential Variables with Heat Input Mechanics 16.4 Waveform-Controlled Power Sources, Appendix H & Heat-Input Compliance 16.5 P-Numbers, Group Numbers, F-Numbers & A-Numbers 16.6 QW-451 Mechanical Test Protocols & Procedure Qualification Test Evaluation
18 Chapter 17: Filler Metal Specifications, Selection & Consumable Control
17.1 AWS A5 Architecture: SMAW, GMAW/GTAW and FCAW Consumable Classifications 17.2 SAW Wire-Flux Systems, Alloy Pickup & PWHT Property Effects 17.3 Stainless Filler Specifications, Solidification Modes & Dissimilar-Metal Joints 17.4 AWS A5.10 Aluminum Filler Selection & Dilution and Ferrite-Number Calculations 17.5 Consumable Storage, Conditioning Envelopes & Atmospheric Exposure Limits 17.6 Low-Hydrogen Designators, the Yurioka Parameter & Preheat Sizing
19 Chapter 18: Welder Performance Qualification, Quality Management & Welding Economics
18.1 Welder Qualification Philosophy, Test Positions & Thickness and Diameter Ranges 18.2 F-Number Hierarchy, Operator Qualification & Continuity Requirements 18.3 ISO 3834, Welding Coordination, Inspection Test Plans & Equipment Validation 18.4 EN 10204 Material Certification, Traceability & Heat-Input Nonconformance Auditing 18.5 Weld Cost Anatomy, Deposition Rates, Operating Factor & the Overwelding Law 18.6 Economic Optimization Strategies & Fabrication Cost Comparison
16.1 PQR versus WPS Hierarchy, Qualification Workflow & Standard Procedures
Key Takeaways Explain This Topic AI
A Procedure Qualification Record (PQR) is a certified historical record documenting actual welding variables recorded during test coupon fabrication and subsequent destructive mechanical test results; it never specifies operating ranges.
A Welding Procedure Specification (WPS) is a written production instruction providing qualified operating ranges for welders and quality inspectors, mathematically and metallurgically derived from one or more supporting PQRs.
Under ASME Section IX QW-103 and AWS B2.1 Clause 4, the qualifying manufacturer maintains non-delegable operational responsibility; coupon welding cannot be subcontracted, though specimen machining and mechanical testing may be performed by accredited independent laboratories.
Standard Welding Procedure Specifications (SWPSs) per AWS B2.1 and ASME IX Appendix E eliminate coupon welding only when the adopting organization successfully conducts a documented demonstrative test per QW-500.
Multiple PQRs may support a single production WPS, and conversely, a single PQR may support multiple WPSs across different joint configurations, processes, and thickness combinations per QW-200.2.
Last updated: September 2026
16.1 Procedure Qualification Record (PQR) & WPS Generation Workflows
Quick Answer: A Procedure Qualification Record (PQR) is a permanent, certified factual record documenting the actual welding variables (single values, not ranges) recorded during the welding of a test coupon and the resulting destructive test data (tension, bend, impact, macroetch). The Welding Procedure Specification (WPS) is a qualified written direction providing operational parameter ranges to welders and quality personnel for production fabrication. Under ASME Section IX (Article II, QW-200.1/QW-200.2) and AWS B2.1, a preliminary WPS (pWPS) guides test coupon fabrication. The manufacturer holds non-delegable organizational responsibility: while specimen machining and mechanical testing can be subcontracted to accredited testing laboratories, coupon welding must be performed under the direct operational control of the manufacturer by their own personnel. Standard Welding Procedure Specifications (SWPSs) per AWS B2.1 and ASME IX Appendix E exempt the user from standard PQR coupon testing only upon completion of a documented demonstrative test per QW-500.
The Dual-Document Hierarchy: PQR vs. WPS Engineering Philosophy
In pressure vessel, structural, and piping fabrication governed by the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code (BPVC) Section IX and the American Welding Society (AWS) B2.1/B2.1M ( Specification for Welding Procedure and Performance Qualification ), welding is recognized as a special process . The internal metallurgical soundness, mechanical strength, ductility, and fracture toughness of a completed weldment cannot be fully verified through nondestructive surface or volumetric examination alone. Consequently, quality assurance relies on rigorous a priori qualification of the welding procedure.
This regulatory philosophy establishes a strict two-tier documentation hierarchy consisting of the Procedure Qualification Record (PQR) and the Welding Procedure Specification (WPS) . +---------------------------------------------------------------------------------------------------------+
- | THE DUAL-DOCUMENT QUALIFICATION ARCHITECTURE |
- +------------------------------------+--------------------------------------+-----------------------------+
- | Document Parameter | Procedure Qualification Record (PQR) | Welding Procedure Spec (WPS)|
- +------------------------------------+--------------------------------------+-----------------------------+
- | Governing Clauses | ASME IX QW-200.2 / AWS B2.1 Cl. 4 | ASME IX QW-200.1 / AWS B2.1 |
- | Fundamental Purpose | Historical record of test coupon | Working shop instruction |
- | Parameter Representation | Exact actual values recorded | Qualified operational ranges|
- | Base & Weld Metal Thickness | Exact coupon thickness T and weld t | Qualified range per QW-451 |
- | Modifiability & Revisions | Immutable historical document | Dynamic engineering revision|
- | Organizational Certification | Signed certification mandatory | Technical approval required |
- +------------------------------------+--------------------------------------+-----------------------------+
- The Procedure Qualification Record (PQR)
Per ASME Section IX QW-200.2, the PQR is a record of the variables recorded during the welding of the test coupon. It also contains the test results of the tested specimens. Crucially, the PQR is a factual, historical document :
Exact Actuals Only: The PQR records single values observed during coupon fabrication (e.g., "125 A, 24 V, 8.2 in/min travel speed, 225°F preheat"). It never contains operational tolerance ranges.
Destructive Test Results: It records numerical tensile breaking loads, calculated ultimate tensile stresses, failure locations (e.g., "base metal ductile fracture"), guided bend results (e.g., "no open defects"), and absorbed Charpy V-notch energy values.
Immutability: Because it documents a completed historical physical event, a PQR cannot be altered or updated over time. The only permitted changes are editorial or typographical corrections, provided the underlying factual testing data is substantiated by original laboratory records.
The Welding Procedure Specification (WPS)
Per ASME Section IX QW-200.1, a WPS is a written qualified welding procedure prepared to provide direction for making production welds to Code requirements. Unlike the PQR, the WPS is an operational instruction document :
Qualified Ranges: It provides practical operating envelopes (e.g., "110–140 A, 22–26 V, 6–10 in/min") within which a welder or welding operator can maintain arc stability and deposit sound weld metal.
Boundary Conditions: The parameter ranges on the WPS are bounded by the essential, supplementary essential, and nonessential variables established by the supporting PQR(s) and governed by Section IX tables (e.g., QW-451 for thickness, QW-250 for process variables).
The Preliminary WPS (pWPS)
Before a test coupon can be welded, the welding engineer must formulate a preliminary Welding Procedure Specification (pWPS) or draft procedure. The pWPS outlines the proposed base metals, filler metal specifications, joint geometry, preheat, shielding gas composition, and target electrical parameters intended to achieve the desired metallurgical properties. The welder follows the pWPS during coupon assembly while quality personnel record the actual parameters that will populate the final PQR.
Standardized Procedure Qualification Workflow
The standardized workflow for developing, qualifying, and certifying a welding procedure per ASME Section IX Article II and AWS B2.1 follows an eight-stage engineering cycle. STANDARDIZED WPS / PQR DEVELOPMENT PIPELINE
- [1. Design Intent] ----> [2. Formulate pWPS] ----> [3. Assemble & Weld Coupon]
- Design Code Mandates - Select P-No, F-No - Clean & Fit Joint
- Material & Service - Target Volts/Amps - Log Real-Time Variables
- Toughness Reqs - Establish Preheat - Direct Manufacturer Control
- |
- v
- [6. Certify PQR] <------ [5. Destructive Tests] <-- [4. Nondestructive Exam]
- Verify Code Compliance - Reduced-Section Tensile - Visual Inspection (VT)
- Match SMTS & 5% Rule - Guided Bends (QW-160) - Volumetric NDE (RT/UT)
- Sign Certification - Charpy V-Notch (QW-170) - Confirm Defect-Free
- |
- v
- [7. Generate Production WPS] ---------------------> [8. Production Deployment]
- Apply Table QW-451 Thickness Multipliers - Welder Direction in Shop
- Establish Essential & Nonessential Ranges - Quality Surveillance
- Multiplicity Rules: Supporting Relationships
ASME Section IX QW-200.2 explicitly codifies flexible documentation relationships between WPSs and PQRs:
Multiple PQRs Supporting One WPS: A fabricator may combine multiple PQRs to create a single versatile production WPS. For example, a multi-process WPS for Gas Tungsten Arc Welding (GTAW) root combined with Shielded Metal Arc Welding (SMAW) fill and cap can be supported by two distinct PQRs—one qualifying GTAW on a thin coupon and another qualifying SMAW on a heavy-wall coupon.
One PQR Supporting Multiple WPSs: A single robust PQR may support several distinct production WPSs. For example, a single PQR welded on 1.0 in (25.4 mm) thick plate qualifies base metals from 3/16 in (5 mm) up to 2.0 in (50 mm). The fabricator can generate separate WPSs for flat groove welds, vertical fillet welds, and diverse joint groove preparations, all cross-referencing the single PQR.
Standard Welding Procedure Specifications (SWPS)
Both AWS B2.1 and ASME Section IX recognize that qualifying proprietary welding procedures via test coupons represents a significant financial and administrative commitment. To support standard manufacturing applications, the American Welding Society publishes Standard Welding Procedure Specifications (SWPSs) under AWS B2.1. ASME Section IX adopts selected SWPSs through Mandatory Appendix E .
SWPS Architecture and Adoption Prerequisites
An SWPS is a pre-tested, pre-qualified procedure published by AWS consensus committees covering common carbon and austenitic steel combinations, thicknesses, and processes (e.g., AWS B2.1-1-016 for SMAW of carbon steel, 1/8 through 1-1/2 inch thick). However, adopting an SWPS is not simply a paperwork exercise. ASME Section IX Article V ( QW-500 ) establishes mandatory technical and organizational prerequisites:
Formal Organizational Adoption: The manufacturer's quality assurance system must officially adopt the SWPS by recording the company name, entering internal procedure numbers, and obtaining the dated signature of the responsible engineering authority.
Mandatory Demonstrative Testing (QW-500): Prior to production welding, the fabricator must execute a demonstration test coupon using the welding parameters, consumables, and joint configurations specified in the SWPS. The demonstrative coupon must be welded by the manufacturer's employee and subjected to:
Visual examination per QW-194; and
Either mechanical testing (two transverse tension specimens and four guided bend specimens per Table QW-451.1) or volumetric nondestructive examination (RT or UT) as permitted by QW-520.
Prohibition of Technical Alteration: The manufacturer is strictly forbidden from altering any essential or supplementary essential variable printed on the SWPS. If any parameter (e.g., shielding gas composition, base metal P-Number, or electrical parameter range) must be changed to suit shop operations, the entire SWPS is voided, and the procedure must be qualified independently from scratch under Article II. +---------------------------------------------------------------------------------------------------------+
- | SWPS VS. PROPRIETARY ASME IX QUALIFICATION |
- +------------------------------------+----------------------------------+---------------------------------+
- | Technical Parameter | Proprietary PQR Qualification | SWPS per Mandatory Appendix E |
- +------------------------------------+----------------------------------+---------------------------------+
- | Coupon Welding | Mandatory (Article II) | Demonstration Coupon (QW-500) |
- | Mechanical Destructive Testing | Full Tension + Guided Bends | Permitted RT/UT in lieu of Mech |
- | Variable Flexibility | Full engineering control | Zero modification permitted |
- | Supported Materials | Any weldable alloy | Limited to published standards |
- | Development Cost | High initial qualification cost | Low adoption cost |
- +------------------------------------+----------------------------------+---------------------------------+