Study guide

18.1 Welder Qualification Philosophy, Test Positions & Thickness and Diameter Ranges

AWS CWEng Certified Welding Engineer Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & CWEng Exam Overview

About the CWEng Exam: Four Parts, 163 Questions & Testing Logistics Scoring, Composite Weighting, Eligibility & Five-Year Renewal How to Use This Guide & Build Your Open-Book Reference Set

2 Chapter 1: Mathematics & Statistics for Welding Engineers

1.1 Engineering Mathematics: Algebra, Trigonometry & Geometry in Weldments 1.2 Differential & Integral Calculus Fundamentals in Engineering Analysis 1.3 Applied Engineering Statistics, Population Distributions & Quality Metrics 1.4 Polynomial Equations, Conic Sections & Complex Numbers

3 Chapter 2: Physics Fundamentals & Mechanics

2.1 Unit Systems, Dimensional Analysis & Engineering Conversions 2.2 Mechanics: Statics, Equilibrium, Force Vectors & Moments 2.3 Work, Energy, Power & Mechanical Advantage in Welding Systems 2.4 Thermal Physics, Linear/Volumetric Expansion & Heat Capacity

4 Chapter 3: General & Physical Chemistry for Welding

3.1 Atomic Structure, Bonding & Solid-Solution Thermodynamics 3.2 Hume-Rothery Compatibility, Interstitial Strain & HSLA Microalloy Scavenging 3.3 Gas Laws, Dalton Partial Pressures, Arc Dissociation & Sieverts Law 3.4 Cylinder Capacity, Available Arc Time & Gas-Related Porosity Diagnosis 3.5 Redox Thermodynamics, Deoxidation & Slag-Metal Refining 3.6 Basicity Index Calculations, Toughness Prediction & Cryogenic Consumable Selection

5 Chapter 4: Strength of Materials & Mechanics of Materials

4.1 Engineering vs. True Stress-Strain, Elastic Constants & Z-Direction Ductility 4.2 Plane Stress vs. Plane Strain, Triaxial Restraint & Alloy Property Comparison 4.3 Beam Bending, Transverse Shear, Torsion & Mohr Circle Construction 4.4 Multiaxial Yield Criteria & Combined-Load Analysis of Welded Members 4.5 Fatigue Life, Weld-Toe Stress Concentration & Paris-Erdogan Crack Growth 4.6 LEFM Fracture Toughness, Ductile-Brittle Transition & Larson-Miller Creep 4.7 Comparative Failure-Mode Synthesis & Integrated Flaw and Creep Assessment

6 Chapter 5: Heat Transfer & Fluid Mechanics in Welding

5.1 Fourier Conduction, Rosenthal Moving Heat Source & 2D vs. 3D Heat Flow 5.2 Adams Cooling Rate, the t8/5 Window & HAZ Peak-Temperature Distribution 5.3 Convection, Stefan-Boltzmann Radiation & Emissivity of Weld Surfaces 5.4 Arc Radiation Losses, Preheat Maintenance & PWHT Boundary Conditions 5.5 Fluid Statics, Bernoulli, Viscosity & Reynolds-Number Regimes 5.6 Gas Lens Mechanics, Buoyancy Effects & Torch Flow Design 5.7 Hyperbaric, Vacuum & Controlled-Atmosphere Welding Environments

7 Chapter 6: Electrical Engineering Principles for Welding Systems

6.1 DC and AC Waveforms, Polarity Thermodynamics & Welding Circuit Analysis 6.2 Joule Heating, Electrode Stickout Preheating & Circuit Voltage Distribution 6.3 Power Factor, Reactance, Impedance & Magnetic Transformer Principles 6.4 Lorentz Force, Electromagnetic Pinch Effect & Arc Blow

8 Chapter 7: Welding Heat Sources & Arc Physics

7.1 Volt-Ampere Characteristics, Operating Point, Self-Regulation & OCV Limits 7.2 Inductance, Slope Control & Dynamic Power-Source Response 7.3 Arc Fall Regions, Cathode Emission Mechanisms & Shielding-Gas Ionization 7.4 Maecker Plasma Jet, Degree of Ionization & Anode Heat Partitioning 7.5 Droplet Force Balance & Classification of Metal Transfer Regimes 7.6 Transition Current, Mode Comparison & Pulsed Waveform Design

9 Chapter 8: Arc Welding Processes & Parameter Controls

8.1 Shielded Metal Arc Welding (SMAW): Electrode Flux Chemistries & Variables 8.2 GMAW Process Physics, Transfer Modes & Shielding Gas Interactions 8.3 Solid, Metal-Cored & Flux-Cored Wires with CTWD and Parameter Envelopes 8.4 Gas Tungsten (GTAW) & Plasma Arc Welding (PAW): Electrodes & Keyholing 8.5 Submerged Arc Welding (SAW): Flux Basicity, Multi-Wire & High-Deposition Systems

10 Chapter 9: Advanced, Resistance & Solid-State Joining Processes

9.1 High-Energy-Density Beam Physics & Electron Beam Welding 9.2 Laser Beam Welding, EBW/LBW Comparison & Fiber Laser Parameter Derivation 9.3 Resistance Welding Physics, Electrode Materials & Spot Weld Sequence 9.4 Nugget Sizing, Seam and Projection Welding, and Lobe Curve Process Windows 9.5 Solid-State Joining: Friction Stir Welding (FSW), Explosion & Diffusion 9.6 Thermal Cutting & Gouging: Oxyfuel, Plasma Arc and Air Carbon Arc 9.7 High-Frequency, Flash, Stud & Ultrasonic Welding; Surfacing and Thermal Spray

11 Chapter 10: Physical & Transformation Metallurgy of Steels

10.1 Fe-Fe3C System, Crystal Lattices, c/a Ratio & Interstitial Solubility 10.2 Critical Temperatures, Invariant Reactions & the Lever Rule 10.3 Alloying Elements, the Gamma Loop & Phase-Fraction Calculations 10.4 TTT and CCT Diagrams, Constitutional Supercooling & Scheil Microsegregation 10.5 Non-Equilibrium Transformation Products & Martensite Modeling 10.6 HAZ Anatomy, Microstructural Sub-Zones & Multi-Pass Reheated Regions 10.7 HAZ Hardness Traverses, Toughness Gradients & Peak-Temperature Control

12 Chapter 11: Weldability, Cracking Mechanisms & Alloy Metallurgy

11.1 Hydrogen Cracking Conditions, Carbon Equivalent & Diffusible Hydrogen Control 11.2 Preheat, Interpass and Post-Heat Calculations for Cold-Crack Prevention 11.3 Solidification Cracking, Bead Aspect Ratio, Liquation & Lamellar Tearing 11.4 Lamellar Tearing Mitigation & Hot-Cracking Susceptibility Evaluation 11.5 Stainless Families, Schaeffler and WRC-1992 Diagrams, Ferrite Number & Sensitization 11.6 Duplex Stainless Metallurgy & Dissimilar-Metal Ferrite Prediction 11.7 Aluminum Oxide and Porosity Control, and Titanium Reactive-Metal Welding 11.8 Nickel Superalloys, Strain-Age Cracking & Guinier-Preston Aging Sequences

13 Chapter 12: Weldment Design, Stress Analysis & Joint Mechanics

12.1 AWS A2.4 Welding Symbol Anatomy, Symbol Library & Dimension Syntax 12.2 Joint Architecture, CJP versus PJP, and NDE Examination Symbols 12.3 Fillet and Groove Weld Sizing under Direct Stress in ASD and LRFD 12.4 Plug and Slot Welds, Stress Gradients & the Fillet Weld Break Test 12.5 Eccentric Loading Analysis: Elastic Vector Method vs Instantaneous Center 12.6 Fatigue Design of Welded Connections & Residual Stress/Distortion Control

14 Chapter 13: Non-Destructive Examination (NDE) & Discontinuity Analysis

13.1 Visual Testing Gages & Liquid Penetrant Capillary Mechanics 13.2 Magnetic Particle Testing: Flux Leakage, Field Geometry & Prod Amperage 13.3 Radiographic Physics, Geometric Unsharpness, Density & IQI Sensitivity 13.4 Computed and Digital Radiography & Radiographic Discontinuity Interpretation 13.5 Acoustic Wave Mechanics, Refraction & Angle-Beam Sound-Path Geometry 13.6 AWS D1.1 Decibel Rating, Phased Array & Time-of-Flight Diffraction

15 Chapter 14: Brazing, Soldering & Industrial Welding Safety

14.1 Brazing Thermodynamics, Capillary Wetting Physics & Joint Clearance 14.2 AWS A5.8 Brazing Filler Metals, FB Fluxes & Industrial Heating Processes 14.3 Soldering Fundamentals, Flux Chemistries & Intermetallic Formation 14.4 Hierarchy of Controls, Electric Shock Physics & Industrial Ventilation 14.5 Fume Exposure Limits, Arc Radiation, Hot Work and Confined-Space Entry 14.6 Arc-Generated Toxic Gases, Moving-Equipment Hazards & TWA Exposure Calculation

16 Chapter 15: Structural Fabrication & AWS D1.1 Code Implementation

15.1 AWS D1.1 Scope, Prequalification Limits, Base-Metal Groups & Matching Filler 15.2 Prequalified Joint Details, Backing Systems & Joint Specification Verification 15.3 Thermal Cut Edges, Fit-Up Tolerances & Minimum Preheat Requirements 15.4 Preheat Application Zones, Measurement Instrumentation & Fabrication Audits 15.5 PWHT Fundamentals, D1.1 Thermal Cycles & Visual Acceptance Criteria 15.6 D1.1 Nondestructive Examination Protocols, PWHT Scheduling & Visual Audit Practice

17 Chapter 16: Welding Procedure Qualification (WPS & PQR) per ASME IX & AWS B2.1

16.1 PQR versus WPS Hierarchy, Qualification Workflow & Standard Procedures 16.2 Manufacturer Responsibility, Subcontracting Limits & Multi-Process Qualification 16.3 Essential, Supplementary Essential and Nonessential Variables with Heat Input Mechanics 16.4 Waveform-Controlled Power Sources, Appendix H & Heat-Input Compliance 16.5 P-Numbers, Group Numbers, F-Numbers & A-Numbers 16.6 QW-451 Mechanical Test Protocols & Procedure Qualification Test Evaluation

18 Chapter 17: Filler Metal Specifications, Selection & Consumable Control

17.1 AWS A5 Architecture: SMAW, GMAW/GTAW and FCAW Consumable Classifications 17.2 SAW Wire-Flux Systems, Alloy Pickup & PWHT Property Effects 17.3 Stainless Filler Specifications, Solidification Modes & Dissimilar-Metal Joints 17.4 AWS A5.10 Aluminum Filler Selection & Dilution and Ferrite-Number Calculations 17.5 Consumable Storage, Conditioning Envelopes & Atmospheric Exposure Limits 17.6 Low-Hydrogen Designators, the Yurioka Parameter & Preheat Sizing

19 Chapter 18: Welder Performance Qualification, Quality Management & Welding Economics

18.1 Welder Qualification Philosophy, Test Positions & Thickness and Diameter Ranges 18.2 F-Number Hierarchy, Operator Qualification & Continuity Requirements 18.3 ISO 3834, Welding Coordination, Inspection Test Plans & Equipment Validation 18.4 EN 10204 Material Certification, Traceability & Heat-Input Nonconformance Auditing 18.5 Weld Cost Anatomy, Deposition Rates, Operating Factor & the Overwelding Law 18.6 Economic Optimization Strategies & Fabrication Cost Comparison

18.1 Welder Qualification Philosophy, Test Positions & Thickness and Diameter Ranges

Key Takeaways Explain This Topic AI

Welder Performance Qualification (WPQ) per ASME Section IX (QW-300) and AWS D1.1 (Clause 6) tests an individual's manual dexterity and skill to deposit sound weld metal, fundamentally distinct from Procedure Qualification (PQR), which verifies the mechanical and metallurgical properties of the weldment.

The 6G pipe test position (fixed at 45° ± 5° without rotation) qualifies the welder for all positions (groove and fillet) on both pipe and plate; on plate coupons, passing both 3G (vertical) and 4G (overhead) qualifies all plate positions and pipe ≥ 24 in (600 mm) OD.

Under ASME Section IX QW-452.1(b), deposited weld metal thickness t governs qualification: test coupons with t < 3/4 in (19 mm) qualify up to 2t, whereas coupons with t ≥ 3/4 in deposited in at least three layers qualify for maximum thickness to be welded (unlimited).

Pipe outside diameter limits per QW-452.3 establish thresholds at 1 in (25 mm) and 2-7/8 in (73 mm) OD; testing on pipe ≥ 2-7/8 in qualifies 2-7/8 in to unlimited OD, while testing below 1 in OD qualifies strictly from the test diameter up to unlimited.

Last updated: September 2026

18.1 Welder Performance Qualification (WPQR): Position, Thickness & Diameter Limits

Quick Answer: Welder Performance Qualification (WPQ) establishes an individual's manual dexterity and skill to deposit sound weld metal free of defects, governed by ASME Section IX (Article III, QW-300) and AWS D1.1 (Clause 6 Part C / Clause 10). While a Procedure Qualification Record (PQR) proves base metal and filler metal compatibility, the WPQ tests the person. A 6G pipe coupon (fixed at 45° ± 5°) qualifies all positions (groove and fillet) on pipe and plate. In ASME IX (QW-452), deposited weld metal thickness t t t governs: t < 3 / 4 in t < 3/4\text{ in} t < 3/4 in ( 19 mm 19\text{ mm} 19 mm ) qualifies up to 2 t 2t 2 t , whereas t ≥ 3 / 4 in t \ge 3/4\text{ in} t ≥ 3/4 in with ≥ 3 \ge 3 ≥ 3 layers qualifies unlimited thickness. Pipe outside diameter (QW-452.3) sets boundaries at 1 in 1\text{ in} 1 in and 2 - 7 / 8 in 2\text{-}7/8\text{ in} 2 - 7/8 in ( 73 mm 73\text{ mm} 73 mm ) OD. F-Number rules (QW-433) dictate that qualifying with F4 with backing qualifies F1–F4 with backing, but open-root F4 welding requires qualification without backing. Qualifications remain active unless the welder goes 6 months without welding with that specific process.

Philosophy & Legal Distinction: Procedure Qualification vs. Welder Qualification

In structural and pressure vessel engineering, the distinction between Procedure Qualification and Welder Performance Qualification represents a fundamental legal and technical boundary. A failure to recognize this separation is one of the most common causes of audit citations, project delays, and catastrophic joint rejections. +---------------------------------------------------------------------------------------------------+

  • | PROCEDURE QUALIFICATION (PQR) vs. WELDER QUALIFICATION (WPQ) |
  • +----------------------------------+----------------------------------------------------------------+
  • | Characteristic | Procedure Qualification (PQR) | Welder Qualification (WPQ) |
  • +----------------------------------+---------------------------------+------------------------------+
  • | Primary Purpose | Verifies metallurgical, | Verifies manual skill, |
  • | | chemical, and mechanical | dexterity, and ability to |
  • | | properties of the joint. | deposit sound, defect-free |
  • | | Proves the "recipe" works. | weld metal. |
  • +----------------------------------+---------------------------------+------------------------------+
  • | Governing Sections | ASME IX Article II (QW-200) | ASME IX Article III (QW-300) |
  • | | AWS D1.1 Clause 6 Part B | AWS D1.1 Clause 6 Part C |
  • +----------------------------------+---------------------------------+------------------------------+
  • | Required Testing | Tensile tests, guided-bend | Guided-bend tests or |
  • | | tests, CVN impact tests, | volumetric NDE (RT/UT), |
  • | | hardness traverses, macroetch. | macroetch (fillets). |
  • +----------------------------------+---------------------------------+------------------------------+
  • | Governing Variables | Essential & Supplementary | Welder Essential Variables |
  • | | Essential Variables (heat | (position, backing, F-number,|
  • | | input, PWHT, base metal group). | diameter, progression). |
  • +----------------------------------+---------------------------------+------------------------------+
  • | Portability | Belongs exclusively to the | Generally non-transferable |
  • | | employer / manufacturer. | between employers, except |
  • | | Cannot be transferred. | under standard AWS/ASME QA |
  • | | | reciprocal programs. |
  • +----------------------------------+---------------------------------+------------------------------+

Procedure Qualification Record (PQR): Answers the question: "Can this combination of base metal, filler metal, preheat, heat input, and shielding gas produce a weld joint that meets the minimum mechanical, ductility, and toughness requirements of the design code?" The skill of the person welding the PQR coupon is immaterial; the goal is to qualify the welding chemistry and metallurgy.

Welder Performance Qualification (WPQ/WPQR): Answers the question: "Does this specific individual possess the physical hand-eye coordination, manipulative technique, and process discipline to operate the arc, maintain proper angle, feed wire, and produce a weld deposit free of slag inclusions, lack of fusion, cracks, and porosity?" Mechanical tensile strength and Charpy V-notch toughness are never evaluated on a WPQ coupon; the evaluation relies strictly on volumetric soundness (radiography/ultrasonics) or guided bend tests.

Test Positions and Qualification Matrix (Plate & Pipe)

Welding positions introduce severe gravitational forces that act upon the molten weld pool. As a result, both ASME Section IX (QW-461) and AWS D1.1 (Clause 6 Part C and Clause 10) treat welding position as a primary essential variable for welder qualification. STANDARDIZED TEST POSITIONS

PLATE GROOVE: PIPE GROOVE:

  • ------------ ------------
  • [1G] Flat [1G] Pipe Horizontal, Rotated (Weld at Top)
  • [2G] Horizontal [2G] Pipe Vertical, Axis Fixed (Horizontal Weld)
  • [3G] Vertical [5G] Pipe Horizontal, Axis Fixed (Vertical Weld Up/Down)
  • [4G] Overhead [6G] Pipe Inclined 45° ± 5°, Axis Fixed
  • [6GR] Pipe Inclined 45° with Restriction Ring
  • Detailed Position Mechanics

Plate 1G, 2G, 3G, 4G:

1G (Flat): Gravity assists molten metal placement into the root. Qualifies only flat groove and flat/horizontal fillet.

2G (Horizontal): Weld axis is horizontal on a vertical plate. Molten metal tends to sag toward the bottom bevel face, causing undercut on the upper toe and cold lap on the lower bevel.

3G (Vertical): Molten pool must be manipulated against gravity. Welding progression is an immutable essential variable: Uphill (Vertical-Up) progression cannot qualify Downhill (Vertical-Down) progression, and vice versa.

4G (Overhead): Gravity opposes metal transfer entirely. Requires precise arc length control and surface tension management to prevent excessive convexity and droop.

Pipe 1G, 2G, 5G, 6G, 6GR:

1G (Rotated): Pipe rotates under the torch so deposition occurs strictly within the top 0° to 30° quadrant (flat position equivalent).

2G (Fixed Vertical Axis): Pipe axis is vertical; welder deposits a horizontal groove around the circumference. Qualifies flat and horizontal.

5G (Fixed Horizontal Axis): Pipe axis is horizontal and stationary. The welder must transition continuously through flat (top), vertical (sides), and overhead (bottom) in a single pass.

6G (Fixed Inclined Axis at 45° ± 5°): Pipe is locked at a 45° angle. The welder must simultaneously manage horizontal, vertical, overhead, and flat pool dynamics across compound curves without rotating the workpiece.

6GR (Restricted 6G): A standard 6G pipe test assembly fitted with a circular restriction ring (obstacle plate) placed within 1 / 2 in 1/2\text{ in} 1/2 in ( 13 mm 13\text{ mm} 13 mm ) of the weld joint on the downstream pipe member. This ring obstructs gun angle, electrode manipulation, and direct line of sight. Governed by AWS D1.1 Clause 10, it qualifies welders for complete joint penetration (CJP) groove welds in tubular T-, Y-, and K-connections. 6GR TEST ASSEMBLY CONFIGURATION

  • / / / / / / / / / /
  • / Restriction /
  • / Ring /
  • +=================+ <-- Obstruction Plate
  • | 1/2" max |
  • =======+ +======= Pipe Member
  • \\\\\ | Weld Joint | /////
  • =======+ +======= Pipe Member
  • | |
  • +=================+
  • 45° ± 5° Axis
  • Standard Qualification Position Coverage Matrix
  • Welder Test Coupon Plate Groove Qualified Plate Fillet Qualified Pipe Groove Qualified Pipe Fillet Qualified
  • 1G Plate Flat (F) F None F
  • 2G Plate Flat, Horizontal (F, H) F, H None F, H
  • 3G Plate Flat, Vertical (F, V) F, H, V None F, H, V
  • 4G Plate Flat, Overhead (F, OH) F, H, OH None F, H, OH
  • 3G + 4G Plate ALL (F, H, V, OH) ALL Pipe ≥ 24 in OD \ge 24\text{ in OD} ≥ 24 in OD (F, H, V, OH) ALL
  • 1G Pipe (Rotated) F F F F
  • 2G Pipe F, H F, H F, H F, H
  • 5G Pipe F, V, OH ALL F, V, OH ALL
  • 6G Pipe ALL ALL ALL (Groove & Fillet) ALL
  • 6GR Pipe (AWS D1.1) ALL ALL ALL + T-, Y-, K-Tubulars ALL

Core Rule: 6G Supremacy Successfully passing a single 6G pipe groove weld coupon qualifies the welder for all positions on both pipe and plate, for both groove and fillet configurations. If tubular T-, Y-, and K-connections with unbacked roots are specified, only the 6GR test coupon provides full code qualification.

Thickness Qualification Limits (ASME IX QW-452 vs. AWS D1.1)

One of the most dangerous traps for welding engineers is confusing the thickness qualification limits for procedures (PQR) with those for welders (WPQ) .

In procedure qualification (QW-451), base metal thickness T T T governs mechanical properties. In welder qualification under ASME Section IX (QW-452.1b) , the primary governing variable is the deposited weld metal thickness ( t t t ) for each welding process, not the thickness of the base metal plate. +---------------------------------------------------------------------------------------------------+

  • | ASME SECTION IX TABLE QW-452.1(b) THICKNESS LIMITS |
  • +---------------------------------------+-----------------------------------------------------------+
  • | Thickness of Deposited Weld Metal (t) | Qualified Production Thickness Range |
  • | in Test Coupon | for Deposited Weld Metal |
  • +---------------------------------------+-----------------------------------------------------------+
  • | $t < 1/2\text{ in}$ ($13\text{ mm}$) | Up to $2t$ |
  • +---------------------------------------+-----------------------------------------------------------+
  • | $1/2\text{ in} \le t < 3/4\text{ in}$ | Up to $2t$ |
  • | ($13\text{ mm} \le t < 19\text{ mm}$) | |
  • +---------------------------------------+-----------------------------------------------------------+
  • | $t \ge 3/4\text{ in}$ ($19\text{ mm}$) | **Maximum to be Welded (Unlimited)** |
  • | with minimum 3 weld layers deposited | |
  • +---------------------------------------+-----------------------------------------------------------+
  • Critical Engineering Nuances of QW-452

The 3/4-inch Unlimited Threshold: A welder who deposits 3 / 4 in 3/4\text{ in} 3/4 in ( 19 mm 19\text{ mm} 19 mm ) or more of weld metal using a specific process in a groove coupon, consisting of at least three layers, is qualified to deposit that process to unlimited thickness in production.

Multi-Process Coupons: When two processes are combined in a single coupon (e.g., GTAW root followed by SMAW fill and cap on a 1.0 in 1.0\text{ in} 1.0 in coupon):

If the GTAW deposit is t 1 = 0.1875 in t_1 = 0.1875\text{ in} t 1 ​ = 0.1875 in ( 3 / 16 in 3/16\text{ in} 3/16 in ), the welder is qualified for GTAW up to 2 × 0.1875 = 0.375 in 2 \times 0.1875 = 0.375\text{ in} 2 × 0.1875 = 0.375 in ( 3 / 8 in 3/8\text{ in} 3/8 in ).

If the SMAW deposit is t 2 = 0.8125 in t_2 = 0.8125\text{ in} t 2 ​ = 0.8125 in ( 13 / 16 in 13/16\text{ in} 13/16 in ) deposited in 6 layers, the welder is qualified for SMAW to unlimited thickness ( t = Maximum to be welded t = \text{Maximum to be welded} t = Maximum to be welded ).

AWS D1.1 Thickness Rules (Table 6.11):

AWS D1.1 uses coupon thickness T T T rather than deposited thickness t t t :

Test on 3 / 8 in 3/8\text{ in} 3/8 in ( 10 mm 10\text{ mm} 10 mm ) plate: qualifies 1 / 8 in 1/8\text{ in} 1/8 in to 3 / 4 in 3/4\text{ in} 3/4 in ( 3 to 19 mm 3\text{ to }19\text{ mm} 3 to 19 mm ).

Test on 1 in 1\text{ in} 1 in ( 25 mm 25\text{ mm} 25 mm ) plate: qualifies 1 / 8 in 1/8\text{ in} 1/8 in to unlimited thickness.

Pipe Diameter Qualification Ranges (ASME IX QW-452.3)

Welding small-diameter pipe demands extreme wrist manipulation, continuous torch angle correction, and high travel speed control. Therefore, qualifying on large-diameter pipe does not qualify a welder on small-diameter tubing.

ASME Section IX Table QW-452.3 defines three rigid outside diameter ( O D OD O D ) boundaries: +---------------------------------------------------------------------------------------------------+

  • | ASME SECTION IX TABLE QW-452.3 PIPE DIAMETER LIMITS |
  • +---------------------------------------+-----------------------------------------------------------+
  • | Outside Diameter (OD) of Test Coupon | Outside Diameter Qualified in Production |
  • | | Minimum OD Qualified | Maximum OD Qualified |
  • +---------------------------------------+-------------------------------+---------------------------+
  • | Less than $1\text{ in}$ ($25\text{ mm}$)| Size Welded | Unlimited |
  • +---------------------------------------+-------------------------------+---------------------------+
  • | $1\text{ in}$ to $2\text{-}7/8\text{ in}$ | $1.0\text{ in}$ ($25\text{ mm}$) | Unlimited |
  • | ($25\text{ mm}$ to $73\text{ mm}$) | | |
  • +---------------------------------------+-------------------------------+---------------------------+
  • | $\ge 2\text{-}7/8\text{ in}$ ($73\text{ mm}$) | $2.875\text{ in}$ ($73\text{ mm}$) | Unlimited |
  • +---------------------------------------+-------------------------------+---------------------------+
  • The Standard 2-1/2 Inch NPS Coupon Strategy

In commercial testing facilities, the most ubiquitous pipe test coupon is 2-1/2 in Nominal Pipe Size (NPS 2-1/2) Schedule 80 pipe. Why? NPS 2-1/2 Actual Outside Diameter = 2.875 in = 2 7 8 in = 73.0 mm \text{NPS 2-1/2 Actual Outside Diameter} = 2.875\text{ in} = 2\frac{7}{8}\text{ in} = 73.0\text{ mm} NPS 2-1/2 Actual Outside Diameter = 2.875 in = 2 8 7 ​ in = 73.0 mm

Because the actual outside diameter is exactly 2.875 in 2.875\text{ in} 2.875 in , it hits the boundary of ≥ 2 - 7 / 8 in \ge 2\text{-}7/8\text{ in} ≥ 2 - 7/8 in . Therefore, a single test on NPS 2-1/2 pipe qualifies the welder to weld all pipe diameters down to 2.875 in 2.875\text{ in} 2.875 in and up to unlimited diameter , including flat plate!

If the welder must weld a 3 / 4 in 3/4\text{ in} 3/4 in instrument tubing line ( O D = 0.75 in OD = 0.75\text{ in} O D = 0.75 in ), testing on NPS 2-1/2 pipe is legally invalid. The welder must execute a separate qualification test on a coupon having O D ≤ 0.75 in OD \le 0.75\text{ in} O D ≤ 0.75 in .