Study guide
4.3 Beam Bending, Transverse Shear, Torsion & Mohr Circle Construction
AWS CWEng Certified Welding Engineer Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & CWEng Exam Overview
About the CWEng Exam: Four Parts, 163 Questions & Testing Logistics Scoring, Composite Weighting, Eligibility & Five-Year Renewal How to Use This Guide & Build Your Open-Book Reference Set
2 Chapter 1: Mathematics & Statistics for Welding Engineers
1.1 Engineering Mathematics: Algebra, Trigonometry & Geometry in Weldments 1.2 Differential & Integral Calculus Fundamentals in Engineering Analysis 1.3 Applied Engineering Statistics, Population Distributions & Quality Metrics 1.4 Polynomial Equations, Conic Sections & Complex Numbers
3 Chapter 2: Physics Fundamentals & Mechanics
2.1 Unit Systems, Dimensional Analysis & Engineering Conversions 2.2 Mechanics: Statics, Equilibrium, Force Vectors & Moments 2.3 Work, Energy, Power & Mechanical Advantage in Welding Systems 2.4 Thermal Physics, Linear/Volumetric Expansion & Heat Capacity
4 Chapter 3: General & Physical Chemistry for Welding
3.1 Atomic Structure, Bonding & Solid-Solution Thermodynamics 3.2 Hume-Rothery Compatibility, Interstitial Strain & HSLA Microalloy Scavenging 3.3 Gas Laws, Dalton Partial Pressures, Arc Dissociation & Sieverts Law 3.4 Cylinder Capacity, Available Arc Time & Gas-Related Porosity Diagnosis 3.5 Redox Thermodynamics, Deoxidation & Slag-Metal Refining 3.6 Basicity Index Calculations, Toughness Prediction & Cryogenic Consumable Selection
5 Chapter 4: Strength of Materials & Mechanics of Materials
4.1 Engineering vs. True Stress-Strain, Elastic Constants & Z-Direction Ductility 4.2 Plane Stress vs. Plane Strain, Triaxial Restraint & Alloy Property Comparison 4.3 Beam Bending, Transverse Shear, Torsion & Mohr Circle Construction 4.4 Multiaxial Yield Criteria & Combined-Load Analysis of Welded Members 4.5 Fatigue Life, Weld-Toe Stress Concentration & Paris-Erdogan Crack Growth 4.6 LEFM Fracture Toughness, Ductile-Brittle Transition & Larson-Miller Creep 4.7 Comparative Failure-Mode Synthesis & Integrated Flaw and Creep Assessment
6 Chapter 5: Heat Transfer & Fluid Mechanics in Welding
5.1 Fourier Conduction, Rosenthal Moving Heat Source & 2D vs. 3D Heat Flow 5.2 Adams Cooling Rate, the t8/5 Window & HAZ Peak-Temperature Distribution 5.3 Convection, Stefan-Boltzmann Radiation & Emissivity of Weld Surfaces 5.4 Arc Radiation Losses, Preheat Maintenance & PWHT Boundary Conditions 5.5 Fluid Statics, Bernoulli, Viscosity & Reynolds-Number Regimes 5.6 Gas Lens Mechanics, Buoyancy Effects & Torch Flow Design 5.7 Hyperbaric, Vacuum & Controlled-Atmosphere Welding Environments
7 Chapter 6: Electrical Engineering Principles for Welding Systems
6.1 DC and AC Waveforms, Polarity Thermodynamics & Welding Circuit Analysis 6.2 Joule Heating, Electrode Stickout Preheating & Circuit Voltage Distribution 6.3 Power Factor, Reactance, Impedance & Magnetic Transformer Principles 6.4 Lorentz Force, Electromagnetic Pinch Effect & Arc Blow
8 Chapter 7: Welding Heat Sources & Arc Physics
7.1 Volt-Ampere Characteristics, Operating Point, Self-Regulation & OCV Limits 7.2 Inductance, Slope Control & Dynamic Power-Source Response 7.3 Arc Fall Regions, Cathode Emission Mechanisms & Shielding-Gas Ionization 7.4 Maecker Plasma Jet, Degree of Ionization & Anode Heat Partitioning 7.5 Droplet Force Balance & Classification of Metal Transfer Regimes 7.6 Transition Current, Mode Comparison & Pulsed Waveform Design
9 Chapter 8: Arc Welding Processes & Parameter Controls
8.1 Shielded Metal Arc Welding (SMAW): Electrode Flux Chemistries & Variables 8.2 GMAW Process Physics, Transfer Modes & Shielding Gas Interactions 8.3 Solid, Metal-Cored & Flux-Cored Wires with CTWD and Parameter Envelopes 8.4 Gas Tungsten (GTAW) & Plasma Arc Welding (PAW): Electrodes & Keyholing 8.5 Submerged Arc Welding (SAW): Flux Basicity, Multi-Wire & High-Deposition Systems
10 Chapter 9: Advanced, Resistance & Solid-State Joining Processes
9.1 High-Energy-Density Beam Physics & Electron Beam Welding 9.2 Laser Beam Welding, EBW/LBW Comparison & Fiber Laser Parameter Derivation 9.3 Resistance Welding Physics, Electrode Materials & Spot Weld Sequence 9.4 Nugget Sizing, Seam and Projection Welding, and Lobe Curve Process Windows 9.5 Solid-State Joining: Friction Stir Welding (FSW), Explosion & Diffusion 9.6 Thermal Cutting & Gouging: Oxyfuel, Plasma Arc and Air Carbon Arc 9.7 High-Frequency, Flash, Stud & Ultrasonic Welding; Surfacing and Thermal Spray
11 Chapter 10: Physical & Transformation Metallurgy of Steels
10.1 Fe-Fe3C System, Crystal Lattices, c/a Ratio & Interstitial Solubility 10.2 Critical Temperatures, Invariant Reactions & the Lever Rule 10.3 Alloying Elements, the Gamma Loop & Phase-Fraction Calculations 10.4 TTT and CCT Diagrams, Constitutional Supercooling & Scheil Microsegregation 10.5 Non-Equilibrium Transformation Products & Martensite Modeling 10.6 HAZ Anatomy, Microstructural Sub-Zones & Multi-Pass Reheated Regions 10.7 HAZ Hardness Traverses, Toughness Gradients & Peak-Temperature Control
12 Chapter 11: Weldability, Cracking Mechanisms & Alloy Metallurgy
11.1 Hydrogen Cracking Conditions, Carbon Equivalent & Diffusible Hydrogen Control 11.2 Preheat, Interpass and Post-Heat Calculations for Cold-Crack Prevention 11.3 Solidification Cracking, Bead Aspect Ratio, Liquation & Lamellar Tearing 11.4 Lamellar Tearing Mitigation & Hot-Cracking Susceptibility Evaluation 11.5 Stainless Families, Schaeffler and WRC-1992 Diagrams, Ferrite Number & Sensitization 11.6 Duplex Stainless Metallurgy & Dissimilar-Metal Ferrite Prediction 11.7 Aluminum Oxide and Porosity Control, and Titanium Reactive-Metal Welding 11.8 Nickel Superalloys, Strain-Age Cracking & Guinier-Preston Aging Sequences
13 Chapter 12: Weldment Design, Stress Analysis & Joint Mechanics
12.1 AWS A2.4 Welding Symbol Anatomy, Symbol Library & Dimension Syntax 12.2 Joint Architecture, CJP versus PJP, and NDE Examination Symbols 12.3 Fillet and Groove Weld Sizing under Direct Stress in ASD and LRFD 12.4 Plug and Slot Welds, Stress Gradients & the Fillet Weld Break Test 12.5 Eccentric Loading Analysis: Elastic Vector Method vs Instantaneous Center 12.6 Fatigue Design of Welded Connections & Residual Stress/Distortion Control
14 Chapter 13: Non-Destructive Examination (NDE) & Discontinuity Analysis
13.1 Visual Testing Gages & Liquid Penetrant Capillary Mechanics 13.2 Magnetic Particle Testing: Flux Leakage, Field Geometry & Prod Amperage 13.3 Radiographic Physics, Geometric Unsharpness, Density & IQI Sensitivity 13.4 Computed and Digital Radiography & Radiographic Discontinuity Interpretation 13.5 Acoustic Wave Mechanics, Refraction & Angle-Beam Sound-Path Geometry 13.6 AWS D1.1 Decibel Rating, Phased Array & Time-of-Flight Diffraction
15 Chapter 14: Brazing, Soldering & Industrial Welding Safety
14.1 Brazing Thermodynamics, Capillary Wetting Physics & Joint Clearance 14.2 AWS A5.8 Brazing Filler Metals, FB Fluxes & Industrial Heating Processes 14.3 Soldering Fundamentals, Flux Chemistries & Intermetallic Formation 14.4 Hierarchy of Controls, Electric Shock Physics & Industrial Ventilation 14.5 Fume Exposure Limits, Arc Radiation, Hot Work and Confined-Space Entry 14.6 Arc-Generated Toxic Gases, Moving-Equipment Hazards & TWA Exposure Calculation
16 Chapter 15: Structural Fabrication & AWS D1.1 Code Implementation
15.1 AWS D1.1 Scope, Prequalification Limits, Base-Metal Groups & Matching Filler 15.2 Prequalified Joint Details, Backing Systems & Joint Specification Verification 15.3 Thermal Cut Edges, Fit-Up Tolerances & Minimum Preheat Requirements 15.4 Preheat Application Zones, Measurement Instrumentation & Fabrication Audits 15.5 PWHT Fundamentals, D1.1 Thermal Cycles & Visual Acceptance Criteria 15.6 D1.1 Nondestructive Examination Protocols, PWHT Scheduling & Visual Audit Practice
17 Chapter 16: Welding Procedure Qualification (WPS & PQR) per ASME IX & AWS B2.1
16.1 PQR versus WPS Hierarchy, Qualification Workflow & Standard Procedures 16.2 Manufacturer Responsibility, Subcontracting Limits & Multi-Process Qualification 16.3 Essential, Supplementary Essential and Nonessential Variables with Heat Input Mechanics 16.4 Waveform-Controlled Power Sources, Appendix H & Heat-Input Compliance 16.5 P-Numbers, Group Numbers, F-Numbers & A-Numbers 16.6 QW-451 Mechanical Test Protocols & Procedure Qualification Test Evaluation
18 Chapter 17: Filler Metal Specifications, Selection & Consumable Control
17.1 AWS A5 Architecture: SMAW, GMAW/GTAW and FCAW Consumable Classifications 17.2 SAW Wire-Flux Systems, Alloy Pickup & PWHT Property Effects 17.3 Stainless Filler Specifications, Solidification Modes & Dissimilar-Metal Joints 17.4 AWS A5.10 Aluminum Filler Selection & Dilution and Ferrite-Number Calculations 17.5 Consumable Storage, Conditioning Envelopes & Atmospheric Exposure Limits 17.6 Low-Hydrogen Designators, the Yurioka Parameter & Preheat Sizing
19 Chapter 18: Welder Performance Qualification, Quality Management & Welding Economics
18.1 Welder Qualification Philosophy, Test Positions & Thickness and Diameter Ranges 18.2 F-Number Hierarchy, Operator Qualification & Continuity Requirements 18.3 ISO 3834, Welding Coordination, Inspection Test Plans & Equipment Validation 18.4 EN 10204 Material Certification, Traceability & Heat-Input Nonconformance Auditing 18.5 Weld Cost Anatomy, Deposition Rates, Operating Factor & the Overwelding Law 18.6 Economic Optimization Strategies & Fabrication Cost Comparison
4.3 Beam Bending, Transverse Shear, Torsion & Mohr Circle Construction
Key Takeaways Explain This Topic AI
Euler-Bernoulli beam theory assumes that planar cross-sections remain plane and perpendicular to the neutral axis during bending, yielding the flexure formula σ = -My/I and peak surface stress σ_max = M/S.
Transverse shear stress in beams follows Jourawski's formula τ = VQ / (It); in welded wide-flange I-girders, the web carries 90–95% of the total transverse shear force, while longitudinal shear flow q = VQ/I sizes the web-to-flange fillet welds.
Torsion in circular shafts produces shear stresses that vary linearly from zero at the center to a surface maximum τ_max = Tr/J; in contrast, closed thin-walled box girders resist twisting via Bredt-Batho shear flow q = T / (2A_m), possessing torsional stiffness orders of magnitude higher than open structural shapes.
Mohr's Circle graphically resolves two-dimensional stress states into principal normal stresses σ_1,2 = σ_avg ± R and maximum in-plane shear stress τ_max = R; absolute maximum shear stress equals (σ_1 - σ_3)/2 in three dimensions.
Last updated: September 2026
4.2 Beam Bending, Torsion & Combined Stresses (Mohr's Circle)
Quick Answer: Beam bending generates normal flexural stresses defined by σ = − M y / I \sigma = -My/I σ = − M y / I , with maximum fiber stress σ max = M / S \sigma_{\max} = M/S σ m a x = M / S . Transverse shear produces internal shear stresses τ = V Q / ( I t ) \tau = VQ/(It) τ = V Q / ( I t ) , creating longitudinal shear flow q = V Q / I q = VQ/I q = V Q / I that governs the sizing of web-to-flange welds in built-up girders. Torsion of circular members produces shear stresses τ = T r / J \tau = Tr/J τ = T r / J , whereas thin-walled closed tubes follow Bredt-Batho theory τ = T / ( 2 A m t ) \tau = T/(2A_m t) τ = T / ( 2 A m t ) . Under combined bending, torsion, and shear, 2D Mohr's Circle determines principal normal stresses σ 1 , 2 = σ avg ± R \sigma_{1,2} = \sigma_{\text{avg}} \pm R σ 1 , 2 = σ avg ± R and maximum shear stress τ max = R \tau_{\max} = R τ m a x = R . For ductile structural metals, multiaxial yield is governed by the von Mises criterion ( σ v M ≤ σ y \sigma_{vM} \le \sigma_y σ v M ≤ σ y ), predicting pure shear yield at τ y = 0.577 σ y \tau_y = 0.577\sigma_y τ y = 0.577 σ y .
1. Pure Bending & Euler-Bernoulli Beam Theory
Euler-Bernoulli beam theory (classical beam theory) describes the relationship between applied bending moments, cross-sectional geometry, and internal normal flexural stresses. y ^ Linear Normal Stress
- | Top: Compression (σ < 0) Distribution σ(y) = -My/I
- +----+----+ ------------------------ +---------------+ Compression (-)
- | | | | | /
- | | | v | /
- ------+----+----+---------------------- Neutral Axis -+-----------/--- σ = 0
- | | | ^ | /
- | | | | | /
- +----+----+ ------------------------ +--------+------> Tension (+)
- | Bottom: Tension (σ > 0)
- +-----------------------------> x
- Kinematic Assumptions
Plane Sections Remain Plane: Cross-sections perpendicular to the beam axis before bending remain planar and perpendicular to the deformed neutral axis after bending (neglecting transverse shear warping, valid for slender beams where span-to-depth ratio L / h > 10 L/h > 10 L / h > 10 ).
Homogeneous, Isotropic & Linearly Elastic: The material obeys Hooke's law ( σ = E ε \sigma = E \varepsilon σ = Eε ) and possesses identical elastic moduli in tension and compression.
Small Deflections: Displacements are small relative to cross-sectional dimensions, ensuring radius of curvature ρ \rho ρ satisfies 1 / ρ ≈ d 2 v / d x 2 1/\rho \approx d^2 v / dx^2 1/ ρ ≈ d 2 v / d x 2 .
Derivation of the Flexure Formula
Consider an element of length d x dx d x bent into an arc with radius of curvature ρ \rho ρ measured from the center of curvature to the neutral surface. The longitudinal normal strain ε x \varepsilon_x ε x at distance y y y from the neutral axis is: ε x = − y ρ = − κ y \varepsilon_x = -\frac{y}{\rho} = -\kappa y ε x = − ρ y = − κ y
where κ = 1 / ρ \kappa = 1/\rho κ = 1/ ρ is the beam curvature. Applying Hooke's law ( σ x = E ε x \sigma_x = E \varepsilon_x σ x = E ε x ): σ x = − E κ y = − E y ρ \sigma_x = -E \kappa y = -\frac{E y}{\rho} σ x = − E κ y = − ρ E y
Because no net axial force acts on the cross-section in pure bending ( ∫ A σ x d A = 0 \int_A \sigma_x dA = 0 ∫ A σ x d A = 0 ): − E ρ ∫ A y d A = 0 ⟹ ∫ A y d A = 0 -\frac{E}{\rho} \int_A y \, dA = 0 \implies \int_A y \, dA = 0 − ρ E ∫ A y d A = 0 ⟹ ∫ A y d A = 0
This proves that the neutral axis must pass through the centroid of the cross-sectional area .
The internal resultant bending moment M M M resists the applied moment: M = − ∫ A y σ x d A = E ρ ∫ A y 2 d A = E I ρ = E I κ M = -\int_A y \, \sigma_x \, dA = \frac{E}{\rho} \int_A y^2 \, dA = \frac{E I}{\rho} = E I \kappa M = − ∫ A y σ x d A = ρ E ∫ A y 2 d A = ρ E I = E I κ
where I = ∫ A y 2 d A I = \int_A y^2 dA I = ∫ A y 2 d A is the second moment of area (area moment of inertia) about the neutral axis. Solving for curvature yields κ = 1 / ρ = M / ( E I ) \kappa = 1/\rho = M / (EI) κ = 1/ ρ = M / ( E I ) . Substituting κ \kappa κ back into the stress equation produces the Flexure Formula : σ x ( y ) = − M y I \sigma_x(y) = -\frac{M y}{I} σ x ( y ) = − I M y
where y y y is positive upward from the neutral axis. Tension occurs where y y y is negative (below neutral axis for positive bending moment), and compression occurs where y y y is positive.
Maximum Flexural Stress & Section Modulus ( S S S )
The extreme fiber stress occurs at maximum distance c = y max c = y_{\max} c = y m a x : σ max = M c I = M S \sigma_{\max} = \frac{M c}{I} = \frac{M}{S} σ m a x = I M c = S M
where S = I / c S = I / c S = I / c is the elastic section modulus . For standard cross-sections:
Solid Rectangular ( b × h b \times h b × h ): I = b h 3 12 , c = h 2 , S = b h 2 6 I = \frac{b h^3}{12}, \qquad c = \frac{h}{2}, \qquad S = \frac{b h^2}{6} I = 12 b h 3 , c = 2 h , S = 6 b h 2
Solid Circular (Diameter d d d ): I = π d 4 64 , c = d 2 , S = π d 3 32 I = \frac{\pi d^4}{64}, \qquad c = \frac{d}{2}, \qquad S = \frac{\pi d^3}{32} I = 64 π d 4 , c = 2 d , S = 32 π d 3
Hollow Circular Tube (Outer D o D_o D o , Inner D i D_i D i ): I = π ( D o 4 − D i 4 ) 64 , S = π ( D o 4 − D i 4 ) 32 D o I = \frac{\pi (D_o^4 - D_i^4)}{64}, \qquad S = \frac{\pi (D_o^4 - D_i^4)}{32 D_o} I = 64 π ( D o 4 − D i 4 ) , S = 32 D o π ( D o 4 − D i 4 )
Parallel Axis Theorem (for Built-Up Welded Sections): I = ∑ ( I ˉ i + A i d i 2 ) I = \sum \left( \bar{I}_i + A_i d_i^2 \right) I = ∑ ( I ˉ i + A i d i 2 ) where I ˉ i \bar{I}_i I ˉ i is the local moment of inertia of component i i i , A i A_i A i is its area, and d i d_i d i is the perpendicular distance from its centroid to the composite neutral axis.
2. Transverse Shear Stress in Beams & Flange-to-Web Welds
When a beam is subjected to transverse shear loads (non-uniform bending, V = d M / d x V = dM/dx V = d M / d x ), transverse and longitudinal shear stresses are generated simultaneously to preserve equilibrium. Built-Up Welded I-Girder Shear Stress Distribution τ(y)
- |<----- b_f ----->|
- +---+-----------------+---+ t_f +--+ Flange Shear (Small)
- | Top Flange |
- +---+--------+--------+---+ |
- | /| | |\ | <--- Fillet Welds | Longitudinal Shear Flow: q = VQ/I
- |/ | | t_w | \| q_weld = q/2 |
- | +-----+-----+ | | /-------------------------\
- | | | | | | | | Web carries
- h | | | | | | | | 90-95% of
- | | | | | | | | Shear Force
| +-----+-----+ | | \-------------------------/ τ_max at N.A.
- |\ | | | /|
- | \| | |/ | <--- Fillet Welds |
- +---+--------+--------+---+ t_f |
- | Bottom Flange | +--+ Flange Shear
- +---+-----------------+---+
- Jourawski's Shear Formula
By evaluating the horizontal force balance on a longitudinal slice of a beam element, Jourawski's Formula establishes transverse shear stress τ \tau τ at any depth y 1 y_1 y 1 : τ ( y 1 ) = V Q ( y 1 ) I t \tau(y_1) = \frac{V Q(y_1)}{I t} τ ( y 1 ) = I t V Q ( y 1 )
where:
V V V = Transverse shear force at the cross-section.
I I I = Total area moment of inertia of the entire cross-section about the neutral axis.
t t t = Thickness of the cross-section at the plane of the cut.
Q ( y 1 ) Q(y_1) Q ( y 1 ) = First moment of area of the cross-sectional portion above (or below) the level y 1 y_1 y 1 about the neutral axis: Q ( y 1 ) = ∫ y 1 c y d A = A ′ y ˉ ′ Q(y_1) = \int_{y_1}^c y \, dA = A' \bar{y}' Q ( y 1 ) = ∫ y 1 c y d A = A ′ y ˉ ′ where A ′ A' A ′ is the area of the section isolated beyond the cut, and y ˉ ′ \bar{y}' y ˉ ′ is the distance from the neutral axis to the centroid of A ′ A' A ′ .
Characteristics of Beam Shear Distribution
Rectangular Sections: Parabolic distribution with τ = 0 \tau = 0 τ = 0 at top and bottom surfaces, peaking at the neutral axis: τ max = 3 V 2 A = 1.5 τ avg \tau_{\max} = \frac{3 V}{2 A} = 1.5 \tau_{\text{avg}} τ m a x = 2 A 3 V = 1.5 τ avg
Welded Wide-Flange (I-Girder) Sections: The flanges carry negligible vertical shear stress because t = b f t = b_f t = b f is large and Q Q Q is small. In the web, t = t w t = t_w t = t w is thin, causing shear stress to concentrate heavily. The web carries 90 – 95 % 90\text{--}95\% 90 – 95% of the total transverse shear force , typically approximated as: τ web, avg ≈ V t w h w \tau_{\text{web, avg}} \approx \frac{V}{t_w h_w} τ web, avg ≈ t w h w V
Longitudinal Shear Flow ( q q q ) & Sizing of Girder Welds
In built-up girders fabricated by welding two flange plates to a central web plate, horizontal shear forces tend to slip the flanges along the web. The longitudinal shear force per unit length is defined as shear flow ( q q q , in N/mm \text{N/mm} N/mm or lb/in \text{lb/in} lb/in ): q = τ t = V Q f I q = \tau t = \frac{V Q_f}{I} q = τ t = I V Q f
where Q f = A flange ⋅ d f = ( b f t f ) d f Q_f = A_{\text{flange}} \cdot d_f = (b_f t_f) d_f Q f = A flange ⋅ d f = ( b f t f ) d f , and d f d_f d f is the distance from the composite neutral axis to the flange centroid.
Because two symmetrical fillet welds connect the flange to the web: q weld = q 2 = V Q f 2 I q_{\text{weld}} = \frac{q}{2} = \frac{V Q_f}{2 I} q weld = 2 q = 2 I V Q f
Under AWS D1.1, the required effective weld throat t e t_e t e for an allowable shear stress τ allow \tau_{\text{allow}} τ allow (e.g., 0.30 × tensile strength 0.30 \times \text{tensile strength} 0.30 × tensile strength for matching filler metal) is: t e = q weld τ allow = V Q f 2 I τ allow t_e = \frac{q_{\text{weld}}}{\tau_{\text{allow}}} = \frac{V Q_f}{2 I \tau_{\text{allow}}} t e = τ allow q weld = 2 I τ allow V Q f
For an equal-leg fillet weld, leg size is w = t e / 0.7071 w = t_e / 0.7071 w = t e /0.7071 .
3. Torsion of Circular Shafts & Thin-Walled Tubes
Torsional moments ( T T T ) twist a member about its longitudinal axis, creating pure shear stresses.
Circular Solid and Tubular Shafts
In axisymmetric circular sections, cross-sections rotate as rigid planes without out-of-plane warping. Shear strain γ \gamma γ varies linearly with radial distance r r r from the centerline, reaching maximum at the outer surface ( r = c = D o / 2 r = c = D_o/2 r = c = D o /2 ): τ ( r ) = T r J , τ max = T c J = T Z p \tau(r) = \frac{T r}{J}, \qquad \tau_{\max} = \frac{T c}{J} = \frac{T}{Z_p} τ ( r ) = J T r , τ m a x = J T c = Z p T
where:
J J J = Polar moment of inertia ( J = I x + I y J = I_x + I_y J = I x + I y ). For a solid shaft, J = π d 4 32 J = \frac{\pi d^4}{32} J = 32 π d 4 . For a tubular shaft, J = π ( D o 4 − D i 4 ) 32 J = \frac{\pi (D_o^4 - D_i^4)}{32} J = 32 π ( D o 4 − D i 4 ) .
Z p = J / c Z_p = J / c Z p = J / c = Polar section modulus.
- The angle of twist ϕ \phi ϕ over length L L L is: ϕ = T L G J \phi = \frac{T L}{G J} ϕ = G J T L
- Thin-Walled Closed Tubes (Bredt-Batho Theory)
For non-circular or circular thin-walled closed tubes with wall thickness t t t : q = τ t = T 2 A m ⟹ τ = T 2 A m t q = \tau t = \frac{T}{2 A_m} \implies \tau = \frac{T}{2 A_m t} q = τ t = 2 A m T ⟹ τ = 2 A m t T
where A m A_m A m is the area enclosed by the median line of the tube wall profile. The torsional constant is: J = 4 A m 2 ∮ d s t J = \frac{4 A_m^2}{\oint \frac{ds}{t}} J = ∮ t d s 4 A m 2
For constant thickness t t t , J = 4 A m 2 t S m J = \frac{4 A_m^2 t}{S_m} J = S m 4 A m 2 t , where S m S_m S m is the perimeter of the median line.
Open vs. Closed Sections in Welded Construction
Critical Structural Principle: Closed hollow structural sections (HSS) and welded box girders possess immense torsional resistance because continuous shear flow q q q circulates around the closed perimeter. If an open structural shape is used (e.g., a C-channel, I-beam, or a slit pipe), continuous shear circulation is impossible. Shear stress is governed by open thin-walled torsion: J open = 1 3 ∑ b i t i 3 J_{\text{open}} = \frac{1}{3} \sum b_i t_i^3 J open = 3 1 ∑ b i t i 3
Because J open ∝ t 3 J_{\text{open}} \propto t^3 J open ∝ t 3 while J closed ∝ A m 2 t J_{\text{closed}} \propto A_m^2 t J closed ∝ A m 2 t , a closed welded box girder typically exhibits 100 to 1000 times 100\text{ to }1000\text{ times} 100 to 1000 times greater torsional stiffness than an open I-beam of identical steel mass. Open sections subjected to twisting warp severely and suffer premature lateral-torsional buckling.
4. Combined Stresses & Two-Dimensional Mohr's Circle
Real weldments rarely experience pure uniaxial tension or pure torsion alone. They endure combined axial tension, bending, and shear loads. Evaluating structural integrity requires transforming these combined stresses into principal stresses. τ (Shear Stress)
- ^
- | Point X (σ_x, -τ_xy)
- | *
- | /|
- | / |
- | R / |
- | / | τ_xy
- σ_2 | C(σ_avg, 0)/ |
- *---------------+-----------*-----+------*---------> σ (Normal)
- | \ | σ_1
- | \ |
- | \ |
- | \ |
- | \|
- | *
- | Point Y (σ_y, +τ_xy)
- Plane Stress Transformation Equations
Given in-plane normal stresses σ x , σ y \sigma_x, \sigma_y σ x , σ y and shear stress τ x y \tau_{xy} τ x y acting on an infinitesimal material element, the stresses on an inclined plane rotated by angle θ \theta θ counterclockwise are: σ x ′ = σ x + σ y 2 + ( σ x − σ y 2 ) cos ( 2 θ ) + τ x y sin ( 2 θ ) \sigma_{x'} = \frac{\sigma_x + \sigma_y}{2} + \left(\frac{\sigma_x - \sigma_y}{2}\right) \cos(2\theta) + \tau_{xy} \sin(2\theta) σ x ′ = 2 σ x + σ y + ( 2 σ x − σ y ) cos ( 2 θ ) + τ x y sin ( 2 θ ) τ x ′ y ′ = − ( σ x − σ y 2 ) sin ( 2 θ ) + τ x y cos ( 2 θ ) \tau_{x'y'} = -\left(\frac{\sigma_x - \sigma_y}{2}\right) \sin(2\theta) + \tau_{xy} \cos(2\theta) τ x ′ y ′ = − ( 2 σ x − σ y ) sin ( 2 θ ) + τ x y cos ( 2 θ )
Graphical Construction of Mohr's Circle
Eliminating parameter 2 θ 2\theta 2 θ from the transformation equations reveals the equation of a circle: ( σ x ′ − σ avg ) 2 + τ x ′ y ′ 2 = R 2 (\sigma_{x'} - \sigma_{\text{avg}})^2 + \tau_{x'y'}^2 = R^2 ( σ x ′ − σ avg ) 2 + τ x ′ y ′ 2 = R 2 .
Center Coordinates ( C C C ): C = ( σ avg , 0 ) = ( σ x + σ y 2 , 0 ) C = (\sigma_{\text{avg}}, 0) = \left( \frac{\sigma_x + \sigma_y}{2}, 0 \right) C = ( σ avg , 0 ) = ( 2 σ x + σ y , 0 )
Circle Radius ( R R R ): R = ( σ x − σ y 2 ) 2 + τ x y 2 R = \sqrt{ \left( \frac{\sigma_x - \sigma_y}{2} \right)^2 + \tau_{xy}^2 } R = ( 2 σ x − σ y ) 2 + τ x y 2
Principal Normal Stresses ( σ 1 , σ 2 \sigma_1, \sigma_2 σ 1 , σ 2 ): The intersections of the circle with the horizontal normal stress axis (where shear stress τ = 0 \tau = 0 τ = 0 ): σ 1 = σ avg + R = σ x + σ y 2 + ( σ x − σ y 2 ) 2 + τ x y 2 \sigma_1 = \sigma_{\text{avg}} + R = \frac{\sigma_x + \sigma_y}{2} + \sqrt{ \left( \frac{\sigma_x - \sigma_y}{2} \right)^2 + \tau_{xy}^2 } σ 1 = σ avg + R = 2 σ x + σ y + ( 2 σ x − σ y ) 2 + τ x y 2 σ 2 = σ avg − R = σ x + σ y 2 − ( σ x − σ y 2 ) 2 + τ x y 2 \sigma_2 = \sigma_{\text{avg}} - R = \frac{\sigma_x + \sigma_y}{2} - \sqrt{ \left( \frac{\sigma_x - \sigma_y}{2} \right)^2 + \tau_{xy}^2 } σ 2 = σ avg − R = 2 σ x + σ y − ( 2 σ x − σ y ) 2 + τ x y 2
Principal Planes Orientation ( θ p \theta_p θ p ): tan ( 2 θ p ) = 2 τ x y σ x − σ y \tan(2\theta_p) = \frac{2\tau_{xy}}{\sigma_x - \sigma_y} tan ( 2 θ p ) = σ x − σ y 2 τ x y
Maximum In-Plane Shear Stress ( τ max \tau_{\max} τ m a x ): The apex of the circle: τ max = R = σ 1 − σ 2 2 \tau_{\max} = R = \frac{\sigma_1 - \sigma_2}{2} τ m a x = R = 2 σ 1 − σ 2 The planes of maximum shear stress are oriented at 45 ∘ 45^\circ 4 5 ∘ to the principal planes .
Three-Dimensional Mohr's Circle & Absolute Maximum Shear Stress
In plane stress ( σ z = 0 \sigma_z = 0 σ z = 0 ), the third principal stress is σ 3 = 0 \sigma_3 = 0 σ 3 = 0 . Plotting all three principal stresses ( σ 1 , σ 2 , σ 3 ) (\sigma_1, \sigma_2, \sigma_3) ( σ 1 , σ 2 , σ 3 ) yields three Mohr's circles. The absolute maximum shear stress is: τ abs, max = σ max − σ min 2 \tau_{\text{abs, max}} = \frac{\sigma_{\max} - \sigma_{\min}}{2} τ abs, max = 2 σ m a x − σ m i n
If σ 1 > 0 \sigma_1 > 0 σ 1 > 0 and σ 2 < 0 \sigma_2 < 0 σ 2 < 0 : σ max = σ 1 \sigma_{\max} = \sigma_1 σ m a x = σ 1 and σ min = σ 2 \sigma_{\min} = \sigma_2 σ m i n = σ 2 , so τ abs, max = σ 1 − σ 2 2 \tau_{\text{abs, max}} = \frac{\sigma_1 - \sigma_2}{2} τ abs, max = 2 σ 1 − σ 2 .
If σ 1 > 0 \sigma_1 > 0 σ 1 > 0 and σ 2 > 0 \sigma_2 > 0 σ 2 > 0 : σ max = σ 1 \sigma_{\max} = \sigma_1 σ m a x = σ 1 and σ min = σ 3 = 0 \sigma_{\min} = \sigma_3 = 0 σ m i n = σ 3 = 0 , so τ abs, max = σ 1 − 0 2 = σ 1 2 \tau_{\text{abs, max}} = \frac{\sigma_1 - 0}{2} = \frac{\sigma_1}{2} τ abs, max = 2 σ 1 − 0 = 2 σ 1 .