Study guide

7.1 Volt-Ampere Characteristics, Operating Point, Self-Regulation & OCV Limits

AWS CWEng Certified Welding Engineer Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & CWEng Exam Overview

About the CWEng Exam: Four Parts, 163 Questions & Testing Logistics Scoring, Composite Weighting, Eligibility & Five-Year Renewal How to Use This Guide & Build Your Open-Book Reference Set

2 Chapter 1: Mathematics & Statistics for Welding Engineers

1.1 Engineering Mathematics: Algebra, Trigonometry & Geometry in Weldments 1.2 Differential & Integral Calculus Fundamentals in Engineering Analysis 1.3 Applied Engineering Statistics, Population Distributions & Quality Metrics 1.4 Polynomial Equations, Conic Sections & Complex Numbers

3 Chapter 2: Physics Fundamentals & Mechanics

2.1 Unit Systems, Dimensional Analysis & Engineering Conversions 2.2 Mechanics: Statics, Equilibrium, Force Vectors & Moments 2.3 Work, Energy, Power & Mechanical Advantage in Welding Systems 2.4 Thermal Physics, Linear/Volumetric Expansion & Heat Capacity

4 Chapter 3: General & Physical Chemistry for Welding

3.1 Atomic Structure, Bonding & Solid-Solution Thermodynamics 3.2 Hume-Rothery Compatibility, Interstitial Strain & HSLA Microalloy Scavenging 3.3 Gas Laws, Dalton Partial Pressures, Arc Dissociation & Sieverts Law 3.4 Cylinder Capacity, Available Arc Time & Gas-Related Porosity Diagnosis 3.5 Redox Thermodynamics, Deoxidation & Slag-Metal Refining 3.6 Basicity Index Calculations, Toughness Prediction & Cryogenic Consumable Selection

5 Chapter 4: Strength of Materials & Mechanics of Materials

4.1 Engineering vs. True Stress-Strain, Elastic Constants & Z-Direction Ductility 4.2 Plane Stress vs. Plane Strain, Triaxial Restraint & Alloy Property Comparison 4.3 Beam Bending, Transverse Shear, Torsion & Mohr Circle Construction 4.4 Multiaxial Yield Criteria & Combined-Load Analysis of Welded Members 4.5 Fatigue Life, Weld-Toe Stress Concentration & Paris-Erdogan Crack Growth 4.6 LEFM Fracture Toughness, Ductile-Brittle Transition & Larson-Miller Creep 4.7 Comparative Failure-Mode Synthesis & Integrated Flaw and Creep Assessment

6 Chapter 5: Heat Transfer & Fluid Mechanics in Welding

5.1 Fourier Conduction, Rosenthal Moving Heat Source & 2D vs. 3D Heat Flow 5.2 Adams Cooling Rate, the t8/5 Window & HAZ Peak-Temperature Distribution 5.3 Convection, Stefan-Boltzmann Radiation & Emissivity of Weld Surfaces 5.4 Arc Radiation Losses, Preheat Maintenance & PWHT Boundary Conditions 5.5 Fluid Statics, Bernoulli, Viscosity & Reynolds-Number Regimes 5.6 Gas Lens Mechanics, Buoyancy Effects & Torch Flow Design 5.7 Hyperbaric, Vacuum & Controlled-Atmosphere Welding Environments

7 Chapter 6: Electrical Engineering Principles for Welding Systems

6.1 DC and AC Waveforms, Polarity Thermodynamics & Welding Circuit Analysis 6.2 Joule Heating, Electrode Stickout Preheating & Circuit Voltage Distribution 6.3 Power Factor, Reactance, Impedance & Magnetic Transformer Principles 6.4 Lorentz Force, Electromagnetic Pinch Effect & Arc Blow

8 Chapter 7: Welding Heat Sources & Arc Physics

7.1 Volt-Ampere Characteristics, Operating Point, Self-Regulation & OCV Limits 7.2 Inductance, Slope Control & Dynamic Power-Source Response 7.3 Arc Fall Regions, Cathode Emission Mechanisms & Shielding-Gas Ionization 7.4 Maecker Plasma Jet, Degree of Ionization & Anode Heat Partitioning 7.5 Droplet Force Balance & Classification of Metal Transfer Regimes 7.6 Transition Current, Mode Comparison & Pulsed Waveform Design

9 Chapter 8: Arc Welding Processes & Parameter Controls

8.1 Shielded Metal Arc Welding (SMAW): Electrode Flux Chemistries & Variables 8.2 GMAW Process Physics, Transfer Modes & Shielding Gas Interactions 8.3 Solid, Metal-Cored & Flux-Cored Wires with CTWD and Parameter Envelopes 8.4 Gas Tungsten (GTAW) & Plasma Arc Welding (PAW): Electrodes & Keyholing 8.5 Submerged Arc Welding (SAW): Flux Basicity, Multi-Wire & High-Deposition Systems

10 Chapter 9: Advanced, Resistance & Solid-State Joining Processes

9.1 High-Energy-Density Beam Physics & Electron Beam Welding 9.2 Laser Beam Welding, EBW/LBW Comparison & Fiber Laser Parameter Derivation 9.3 Resistance Welding Physics, Electrode Materials & Spot Weld Sequence 9.4 Nugget Sizing, Seam and Projection Welding, and Lobe Curve Process Windows 9.5 Solid-State Joining: Friction Stir Welding (FSW), Explosion & Diffusion 9.6 Thermal Cutting & Gouging: Oxyfuel, Plasma Arc and Air Carbon Arc 9.7 High-Frequency, Flash, Stud & Ultrasonic Welding; Surfacing and Thermal Spray

11 Chapter 10: Physical & Transformation Metallurgy of Steels

10.1 Fe-Fe3C System, Crystal Lattices, c/a Ratio & Interstitial Solubility 10.2 Critical Temperatures, Invariant Reactions & the Lever Rule 10.3 Alloying Elements, the Gamma Loop & Phase-Fraction Calculations 10.4 TTT and CCT Diagrams, Constitutional Supercooling & Scheil Microsegregation 10.5 Non-Equilibrium Transformation Products & Martensite Modeling 10.6 HAZ Anatomy, Microstructural Sub-Zones & Multi-Pass Reheated Regions 10.7 HAZ Hardness Traverses, Toughness Gradients & Peak-Temperature Control

12 Chapter 11: Weldability, Cracking Mechanisms & Alloy Metallurgy

11.1 Hydrogen Cracking Conditions, Carbon Equivalent & Diffusible Hydrogen Control 11.2 Preheat, Interpass and Post-Heat Calculations for Cold-Crack Prevention 11.3 Solidification Cracking, Bead Aspect Ratio, Liquation & Lamellar Tearing 11.4 Lamellar Tearing Mitigation & Hot-Cracking Susceptibility Evaluation 11.5 Stainless Families, Schaeffler and WRC-1992 Diagrams, Ferrite Number & Sensitization 11.6 Duplex Stainless Metallurgy & Dissimilar-Metal Ferrite Prediction 11.7 Aluminum Oxide and Porosity Control, and Titanium Reactive-Metal Welding 11.8 Nickel Superalloys, Strain-Age Cracking & Guinier-Preston Aging Sequences

13 Chapter 12: Weldment Design, Stress Analysis & Joint Mechanics

12.1 AWS A2.4 Welding Symbol Anatomy, Symbol Library & Dimension Syntax 12.2 Joint Architecture, CJP versus PJP, and NDE Examination Symbols 12.3 Fillet and Groove Weld Sizing under Direct Stress in ASD and LRFD 12.4 Plug and Slot Welds, Stress Gradients & the Fillet Weld Break Test 12.5 Eccentric Loading Analysis: Elastic Vector Method vs Instantaneous Center 12.6 Fatigue Design of Welded Connections & Residual Stress/Distortion Control

14 Chapter 13: Non-Destructive Examination (NDE) & Discontinuity Analysis

13.1 Visual Testing Gages & Liquid Penetrant Capillary Mechanics 13.2 Magnetic Particle Testing: Flux Leakage, Field Geometry & Prod Amperage 13.3 Radiographic Physics, Geometric Unsharpness, Density & IQI Sensitivity 13.4 Computed and Digital Radiography & Radiographic Discontinuity Interpretation 13.5 Acoustic Wave Mechanics, Refraction & Angle-Beam Sound-Path Geometry 13.6 AWS D1.1 Decibel Rating, Phased Array & Time-of-Flight Diffraction

15 Chapter 14: Brazing, Soldering & Industrial Welding Safety

14.1 Brazing Thermodynamics, Capillary Wetting Physics & Joint Clearance 14.2 AWS A5.8 Brazing Filler Metals, FB Fluxes & Industrial Heating Processes 14.3 Soldering Fundamentals, Flux Chemistries & Intermetallic Formation 14.4 Hierarchy of Controls, Electric Shock Physics & Industrial Ventilation 14.5 Fume Exposure Limits, Arc Radiation, Hot Work and Confined-Space Entry 14.6 Arc-Generated Toxic Gases, Moving-Equipment Hazards & TWA Exposure Calculation

16 Chapter 15: Structural Fabrication & AWS D1.1 Code Implementation

15.1 AWS D1.1 Scope, Prequalification Limits, Base-Metal Groups & Matching Filler 15.2 Prequalified Joint Details, Backing Systems & Joint Specification Verification 15.3 Thermal Cut Edges, Fit-Up Tolerances & Minimum Preheat Requirements 15.4 Preheat Application Zones, Measurement Instrumentation & Fabrication Audits 15.5 PWHT Fundamentals, D1.1 Thermal Cycles & Visual Acceptance Criteria 15.6 D1.1 Nondestructive Examination Protocols, PWHT Scheduling & Visual Audit Practice

17 Chapter 16: Welding Procedure Qualification (WPS & PQR) per ASME IX & AWS B2.1

16.1 PQR versus WPS Hierarchy, Qualification Workflow & Standard Procedures 16.2 Manufacturer Responsibility, Subcontracting Limits & Multi-Process Qualification 16.3 Essential, Supplementary Essential and Nonessential Variables with Heat Input Mechanics 16.4 Waveform-Controlled Power Sources, Appendix H & Heat-Input Compliance 16.5 P-Numbers, Group Numbers, F-Numbers & A-Numbers 16.6 QW-451 Mechanical Test Protocols & Procedure Qualification Test Evaluation

18 Chapter 17: Filler Metal Specifications, Selection & Consumable Control

17.1 AWS A5 Architecture: SMAW, GMAW/GTAW and FCAW Consumable Classifications 17.2 SAW Wire-Flux Systems, Alloy Pickup & PWHT Property Effects 17.3 Stainless Filler Specifications, Solidification Modes & Dissimilar-Metal Joints 17.4 AWS A5.10 Aluminum Filler Selection & Dilution and Ferrite-Number Calculations 17.5 Consumable Storage, Conditioning Envelopes & Atmospheric Exposure Limits 17.6 Low-Hydrogen Designators, the Yurioka Parameter & Preheat Sizing

19 Chapter 18: Welder Performance Qualification, Quality Management & Welding Economics

18.1 Welder Qualification Philosophy, Test Positions & Thickness and Diameter Ranges 18.2 F-Number Hierarchy, Operator Qualification & Continuity Requirements 18.3 ISO 3834, Welding Coordination, Inspection Test Plans & Equipment Validation 18.4 EN 10204 Material Certification, Traceability & Heat-Input Nonconformance Auditing 18.5 Weld Cost Anatomy, Deposition Rates, Operating Factor & the Overwelding Law 18.6 Economic Optimization Strategies & Fabrication Cost Comparison

7.1 Volt-Ampere Characteristics, Operating Point, Self-Regulation & OCV Limits

Key Takeaways Explain This Topic AI

Constant Voltage (CV / flat) power sources feature a shallow slope (-1.5 to -3.0 V / 100 A) that enables self-regulating arc behavior in continuous consumable electrode processes (GMAW, FCAW, SAW) paired with constant-speed wire feeders.

The self-regulating arc mechanism in CV GMAW operates through a negative feedback loop: an increase in arc length raises arc voltage, causing an immediate drop in current along the flat load line, which reduces wire melting rate below wire feed speed until equilibrium arc length is restored.

ANSI Z49.1 mandates strict maximum rated Open-Circuit Voltage (OCV) limits: 80 V rms for manual/semiautomatic AC power sources and 100 V dc / 100 V peak for DC power sources to prevent electrocution hazards in industrial environments.

Last updated: September 2026

7.1 Power Source Volt-Ampere Curves: CC vs CV & Self-Regulating Arcs

Quick Answer: Welding power sources are broadly divided into Constant Current (CC / drooper) and Constant Voltage (CV / flat) architectures based on the slope of their static output volt-ampere ( V − I V-I V − I ) characteristic curves ( d V / d I dV/dI d V / d I ). CC power sources exhibit a steep negative slope (typically − 10 to − 25 V / 100 A -10\text{ to }-25\text{ V}/100\text{ A} − 10 to − 25 V /100 A ), ensuring that manual arc length fluctuations produce minimal change in welding current, which is critical for Shielded Metal Arc Welding (SMAW) and Gas Tungsten Arc Welding (GTAW). Conversely, CV power sources have a flat output slope (typically − 1.5 to − 3.0 V / 100 A -1.5\text{ to }-3.0\text{ V}/100\text{ A} − 1.5 to − 3.0 V /100 A ), which produces instantaneous current spikes or drops in response to minor arc voltage changes. When paired with a constant-speed wire feeder in Gas Metal Arc Welding (GMAW) or Flux Cored Arc Welding (FCAW), this flat slope establishes an autonomous, negative-feedback self-regulating arc that dynamically matches wire melting rate to wire feed speed without external sensors.

1. Static Volt-Ampere (V-I) Characteristics: CC vs CV Architectures

The operating point of any electric arc welding circuit is established at the mathematical intersection of two independent electrical curves: the power source static volt-ampere output curve ( V source = f ( I ) V_{\text{source}} = f(I) V source ​ = f ( I ) ) and the arc characteristic curve ( V arc = f ( I , L arc ) V_{\text{arc}} = f(I, L_{\text{arc}}) V arc ​ = f ( I , L arc ​ ) ). Voltage (V) Voltage (V)

  • ^
  • OCV + OCV +
  • | | | |...... Constant Voltage (CV)
  • | | | | Slope = -1.5 to -3.0 V/100A
  • | | Constant Current (CC) | |.... Operating Point

| | Slope = -10 to -25 V/100A | ......

  • V0 +--|---------*----[ Arc Curve ] V0 +-------------*------[ Arc Curve ]
  • | | / | /
  • | | / | /
  • | | / | /
  • 0 +-------+----------------------> Current 0 +---------+---+------------------> Current
  • I0 I0 I_sc
  • Constant Current (CC / "Drooper") Architecture

A Constant Current power source is engineered with a steep negative slope ( d V / d I dV/dI d V / d I ). In conventional transformer-rectifiers, this droop was achieved using high internal leakage reactance or moving iron cores; in modern inverters, digital closed-loop current feedback dynamically adjusts pulse-width modulation (PWM) to force the output along a near-vertical load line.

Mathematical Model: Approximated linearly around the operating point as: V source = V oc − s cc ⋅ I V_{\text{source}} = V_{\text{oc}} - s_{\text{cc}} \cdot I V source ​ = V oc ​ − s cc ​ ⋅ I where V oc V_{\text{oc}} V oc ​ is the Open-Circuit Voltage ( 60 to 80 V 60\text{ to }80\text{ V} 60 to 80 V ) and s cc = ∣ d V / d I ∣ ≈ 0.10 to 0.25 V/A s_{\text{cc}} = |dV/dI| \approx 0.10\text{ to }0.25\text{ V/A} s cc ​ = ∣ d V / d I ∣ ≈ 0.10 to 0.25 V/A ( 10 to 25 V per 100 A 10\text{ to }25\text{ V per }100\text{ A} 10 to 25 V per 100 A ). Many modern inverter CC supplies provide near-vertical slopes ( s cc > 1.0 V/A s_{\text{cc}} > 1.0\text{ V/A} s cc ​ > 1.0 V/A ).

Arc Length Disturbance Response: If a manual welder's hand tremors cause the arc length to jump by Δ L = + 1.5 mm \Delta L = +1.5\text{ mm} Δ L = + 1.5 mm , the arc column voltage jumps by Δ V arc ≈ + 3.0 V \Delta V_{\text{arc}} \approx +3.0\text{ V} Δ V arc ​ ≈ + 3.0 V (assuming an electric field gradient E p ≈ 2.0 V/mm E_p \approx 2.0\text{ V/mm} E p ​ ≈ 2.0 V/mm ). Because the load line is steep: Δ I = − Δ V arc s cc = − 3.0 V 0.20 V/A = − 15 A \Delta I = -\frac{\Delta V_{\text{arc}}}{s_{\text{cc}}} = -\frac{3.0\text{ V}}{0.20\text{ V/A}} = -15\text{ A} Δ I = − s cc ​ Δ V arc ​ ​ = − 0.20 V/A 3.0 V ​ = − 15 A In a nominal 150 A 150\text{ A} 150 A SMAW circuit, this represents only a 10 % 10\% 10% change in current, preserving heat input, penetration depth, and preventing accidental arc extinction.

Constant Voltage (CV / "Flat") Architecture

A Constant Voltage power supply maintains a nearly flat load line with a gentle downward slope ( d V / d I dV/dI d V / d I ).

Mathematical Model: V source = V oc − s cv ⋅ I V_{\text{source}} = V_{\text{oc}} - s_{\text{cv}} \cdot I V source ​ = V oc ​ − s cv ​ ⋅ I where s cv = ∣ d V / d I ∣ ≈ 0.015 to 0.030 V/A s_{\text{cv}} = |dV/dI| \approx 0.015\text{ to }0.030\text{ V/A} s cv ​ = ∣ d V / d I ∣ ≈ 0.015 to 0.030 V/A ( 1.5 to 3.0 V per 100 A 1.5\text{ to }3.0\text{ V per }100\text{ A} 1.5 to 3.0 V per 100 A ). The slight droop is intentional: a zero-slope power source would experience catastrophic, infinite short-circuit current surges during droplet transfer.

Arc Length Disturbance Response: If arc length increases by 1.5 mm 1.5\text{ mm} 1.5 mm ( Δ V arc ≈ + 3.0 V \Delta V_{\text{arc}} \approx +3.0\text{ V} Δ V arc ​ ≈ + 3.0 V ), the resulting current drop is massive: Δ I = − Δ V arc s cv = − 3.0 V 0.020 V/A = − 150 A \Delta I = -\frac{\Delta V_{\text{arc}}}{s_{\text{cv}}} = -\frac{3.0\text{ V}}{0.020\text{ V/A}} = -150\text{ A} Δ I = − s cv ​ Δ V arc ​ ​ = − 0.020 V/A 3.0 V ​ = − 150 A This massive current swing provides the physical mechanism for self-regulation in automated and semi-automatic wire feeding.

2. The Arc Characteristic Line & Operating Point Intersection

The welding arc does not possess a fixed electrical resistance; rather, its voltage is determined by the summation of the electrode fall regions and the column electric field: V arc = ( V c + V a ) + E p ⋅ L arc + R p ( I ) ⋅ I V_{\text{arc}} = (V_c + V_a) + E_p \cdot L_{\text{arc}} + R_p(I) \cdot I V arc ​ = ( V c ​ + V a ​ ) + E p ​ ⋅ L arc ​ + R p ​ ( I ) ⋅ I

where ( V c + V a ) (V_c + V_a) ( V c ​ + V a ​ ) is the sum of cathode and anode sheath voltage drops ( 8 to 16 V 8\text{ to }16\text{ V} 8 to 16 V ), E p E_p E p ​ is the column electric field ( 1.0 to 2.5 V/mm 1.0\text{ to }2.5\text{ V/mm} 1.0 to 2.5 V/mm depending on shielding gas), and L arc L_{\text{arc}} L arc ​ is physical arc length. Arc Voltage (V)

  • ^
  • | / [L_arc = 6 mm] <-- Longer Arc (Higher Voltage)
  • | /
  • V2 +-------------------*---/ [L_arc = 4 mm] <-- Equilibrium Arc
  • | / /
  • V1 +-----------------*---*--/ [L_arc = 2 mm] <-- Shorter Arc (Lower Voltage)
  • | / / /
  • | / * /
  • | / / /
  • | / / /
  • 0 +------------+---+---+-----------------> Welding Current (I)
  • I2 I0 I1

At typical industrial currents ( I > 100 A I > 100\text{ A} I > 100 A ), the arc volt-ampere characteristic displays a weakly positive incremental resistance ( d V arc / d I > 0 dV_{\text{arc}}/dI > 0 d V arc ​ / d I > 0 ) due to column thermal constriction and magnetic pinch effects. The steady-state operating point ( I 0 , V 0 ) (I_0, V_0) ( I 0 ​ , V 0 ​ ) is the unique simultaneous solution where V source ( I ) = V arc ( I ) V_{\text{source}}(I) = V_{\text{arc}}(I) V source ​ ( I ) = V arc ​ ( I ) : V oc − s ⋅ I 0 = V 0 = ( V c + V a ) + E p ⋅ L arc + b ⋅ I 0 V_{\text{oc}} - s \cdot I_0 = V_0 = (V_c + V_a) + E_p \cdot L_{\text{arc}} + b \cdot I_0 V oc ​ − s ⋅ I 0 ​ = V 0 ​ = ( V c ​ + V a ​ ) + E p ​ ⋅ L arc ​ + b ⋅ I 0 ​ I 0 = V oc − ( V c + V a ) − E p ⋅ L arc s + b I_0 = \frac{V_{\text{oc}} - (V_c + V_a) - E_p \cdot L_{\text{arc}}}{s + b} I 0 ​ = s + b V oc ​ − ( V c ​ + V a ​ ) − E p ​ ⋅ L arc ​ ​

3. The Self-Regulating Arc Feedback Loop in CV GMAW

In Gas Metal Arc Welding (GMAW) and Flux-Cored Arc Welding (FCAW), consumable electrode wire is driven into the weld puddle by a mechanical wire feeder operating at a preset, constant wire feed speed ( W F S = v w WFS = v_w W FS = v w ​ ). The process remains stable only if the wire melting rate ( M R MR MR ) precisely equals the feed speed ( M R = W F S MR = WFS MR = W FS ).

The wire melting rate is governed by the Lesnewich equation, combining cathode/anode fall heating and Joule extension preheating: M R = α ⋅ I + β ⋅ L ext ⋅ I 2 MR = \alpha \cdot I + \beta \cdot L_{\text{ext}} \cdot I^2 MR = α ⋅ I + β ⋅ L ext ​ ⋅ I 2

where α \alpha α is the arc heating melting coefficient, β \beta β is the resistive preheating coefficient, and L ext L_{\text{ext}} L ext ​ is the electrode extension (stickout). +-----------------------------------------------------------+

  • | Equilibrium State: Wire Feed Speed (WFS) = Melt Rate (MR) |
  • | Arc Length = L0, Current = I0 |
  • +-----------------------------------------------------------+
  • |
  • [DISTURBANCE: Torch Contact-to-Work Distance Increases]
  • |
  • v
  • +-----------------------------------------------------------+
  • | Arc Length Increases (L_arc > L0) |
  • | Arc Column Resistance Increases |
  • +-----------------------------------------------------------+
  • |
  • v
  • +-----------------------------------------------------------+
  • | Arc Voltage Rises: V_arc = V0 + Delta V |
  • +-----------------------------------------------------------+
  • |
  • v
  • +-----------------------------------------------------------+
  • | CV Load Line Forces Sharp Current Drop: |
  • | Delta I = -Delta V / s_cv (Instantaneous Drop: 50-150 A) |
  • +-----------------------------------------------------------+
  • |
  • v
  • +-----------------------------------------------------------+
  • | Wire Melt Rate Plummets: |
  • | MR = alpha*I + beta*L_ext*I^2 ==> MR < WFS |
  • +-----------------------------------------------------------+
  • |
  • v
  • +-----------------------------------------------------------+
  • | Constant WFS Drives Wire Forward Faster Than It Melts: |
  • | dL_arc / dt = MR - WFS < 0 |
  • | Arc Length Collapses Back to Equilibrium (L_arc -> L0) |
  • +-----------------------------------------------------------+
  • |
  • v
  • +-----------------------------------------------------------+
  • | RESTORATION: Operating Point Returns to (I0, V0) |
  • +-----------------------------------------------------------+
  • Why Process Pairing Cannot Be Inverted

CV with Manual SMAW / GTAW: If a welder uses a CV power source for manual GTAW or SMAW, the slightest unsteadiness in hand position ( 1 mm 1\text{ mm} 1 mm movement) would generate a massive 50 to 100 A 50\text{ to }100\text{ A} 50 to 100 A current surge or drop. The arc would either instantly burn through the sheet metal or violently freeze the electrode into the weld pool.

CC with Fixed-Speed GMAW: If a constant-speed wire feeder is connected to a CC power source, the power source will maintain fixed current regardless of arc length. If the arc length lengthens, current will not drop, melting rate will not decrease, and the wire will continue melting back until it burns back into the copper contact tip, destroying it.

Voltage-Sensing Wire Feeders (VSW) on CC: When field GMAW or FCAW must be performed using engine-driven CC power sources, a voltage-sensing wire feeder is required. The feeder monitors arc voltage across the torch and ground leads; if arc length lengthens (voltage rises), the feeder's internal DC drive motor dynamically speeds up to push the wire forward, mechanically replicating self-regulation.

  • 4. Open-Circuit Voltage (OCV) Safety Standards & Short-Circuit Behavior
  • ANSI Z49.1 & NEMA EW-1 Regulatory Standards

Open-circuit voltage ( V oc V_{\text{oc}} V oc ​ ) is the potential measured across the output terminals when the power source is energized but no arc is established ( I = 0 I = 0 I = 0 ). High OCV promotes reliable arc striking and ionization of the gas path, but poses severe electrocution risks to the welding operator.

Power Source Type Operating Mode ANSI Z49.1 / NEMA EW-1 Max OCV Limit Technical Rationale

Direct Current (DC) Manual & Semi-Automatic 100 V peak 100\text{ V peak} 100 V peak ( 100 V dc 100\text{ V dc} 100 V dc ) DC ventricular fibrillation threshold is higher than AC; provides adequate strike voltage for low-ionization gases.

Alternating Current (AC) Manual & Semi-Automatic 80 V rms 80\text{ V rms} 80 V rms ( 113 V peak 113\text{ V peak} 113 V peak ) AC current at 50 / 60 Hz 50/60\text{ Hz} 50/60 Hz readily induces cardiac arrest; strictly capped.

AC with Shock Hazard Confined Space / Wet 56 V rms 56\text{ V rms} 56 V rms High perspiration or water immersion drastically reduces human skin resistance ( R body < 500 Ω R_{\text{body}} < 500\ \Omega R body ​ < 500 Ω ).

Automatic / Mechanized Locked Cell / Robot 100 V rms 100\text{ V rms} 100 V rms (AC) / 100 V dc 100\text{ V dc} 100 V dc (DC) Interlocked robotic enclosures eliminate direct human contact during arc ignition.

CWEng Exam Distinction: Voltage Reducing Devices (VRDs) are mandated in many jurisdictions for SMAW. A VRD senses when no arc is struck and clamps the terminal OCV to a safe level ( < 15 to 24 V <15\text{ to }24\text{ V} < 15 to 24 V ). Within milliseconds of the electrode touching the workpiece, the VRD switches off, allowing full OCV to establish the arc.

Short-Circuit Current ( I sc I_{\text{sc}} I sc ​ ) Behavior

When an electrode stubs directly into the base metal, arc length becomes zero ( L arc = 0 L_{\text{arc}} = 0 L arc ​ = 0 ) and resistance drops to the metallic loop resistance:

On a CV supply , theoretical short-circuit current is governed by the slope: I sc = V oc / s cv I_{\text{sc}} = V_{\text{oc}} / s_{\text{cv}} I sc ​ = V oc ​ / s cv ​ . For V oc = 36 V V_{\text{oc}} = 36\text{ V} V oc ​ = 36 V and s cv = 0.02 V/A s_{\text{cv}} = 0.02\text{ V/A} s cv ​ = 0.02 V/A , I sc = 1800 A I_{\text{sc}} = 1800\text{ A} I sc ​ = 1800 A . Internal electronic current limiters or inductors must clamp this spike to prevent exploding the wire.

On a CC supply , short-circuit current is constrained by the steep droop. Modern CC units feature an Arc Force (Dig) control that dynamically boosts current by 20 to 50 % 20\text{ to }50\% 20 to 50% only when voltage drops below 14 to 18 V 14\text{ to }18\text{ V} 14 to 18 V , preventing electrode freezing during tight SMAW root-pass manipulation without causing gross overheating.