Study guide

9.4 Nugget Sizing, Seam and Projection Welding, and Lobe Curve Process Windows

AWS CWEng Certified Welding Engineer Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & CWEng Exam Overview

About the CWEng Exam: Four Parts, 163 Questions & Testing Logistics Scoring, Composite Weighting, Eligibility & Five-Year Renewal How to Use This Guide & Build Your Open-Book Reference Set

2 Chapter 1: Mathematics & Statistics for Welding Engineers

1.1 Engineering Mathematics: Algebra, Trigonometry & Geometry in Weldments 1.2 Differential & Integral Calculus Fundamentals in Engineering Analysis 1.3 Applied Engineering Statistics, Population Distributions & Quality Metrics 1.4 Polynomial Equations, Conic Sections & Complex Numbers

3 Chapter 2: Physics Fundamentals & Mechanics

2.1 Unit Systems, Dimensional Analysis & Engineering Conversions 2.2 Mechanics: Statics, Equilibrium, Force Vectors & Moments 2.3 Work, Energy, Power & Mechanical Advantage in Welding Systems 2.4 Thermal Physics, Linear/Volumetric Expansion & Heat Capacity

4 Chapter 3: General & Physical Chemistry for Welding

3.1 Atomic Structure, Bonding & Solid-Solution Thermodynamics 3.2 Hume-Rothery Compatibility, Interstitial Strain & HSLA Microalloy Scavenging 3.3 Gas Laws, Dalton Partial Pressures, Arc Dissociation & Sieverts Law 3.4 Cylinder Capacity, Available Arc Time & Gas-Related Porosity Diagnosis 3.5 Redox Thermodynamics, Deoxidation & Slag-Metal Refining 3.6 Basicity Index Calculations, Toughness Prediction & Cryogenic Consumable Selection

5 Chapter 4: Strength of Materials & Mechanics of Materials

4.1 Engineering vs. True Stress-Strain, Elastic Constants & Z-Direction Ductility 4.2 Plane Stress vs. Plane Strain, Triaxial Restraint & Alloy Property Comparison 4.3 Beam Bending, Transverse Shear, Torsion & Mohr Circle Construction 4.4 Multiaxial Yield Criteria & Combined-Load Analysis of Welded Members 4.5 Fatigue Life, Weld-Toe Stress Concentration & Paris-Erdogan Crack Growth 4.6 LEFM Fracture Toughness, Ductile-Brittle Transition & Larson-Miller Creep 4.7 Comparative Failure-Mode Synthesis & Integrated Flaw and Creep Assessment

6 Chapter 5: Heat Transfer & Fluid Mechanics in Welding

5.1 Fourier Conduction, Rosenthal Moving Heat Source & 2D vs. 3D Heat Flow 5.2 Adams Cooling Rate, the t8/5 Window & HAZ Peak-Temperature Distribution 5.3 Convection, Stefan-Boltzmann Radiation & Emissivity of Weld Surfaces 5.4 Arc Radiation Losses, Preheat Maintenance & PWHT Boundary Conditions 5.5 Fluid Statics, Bernoulli, Viscosity & Reynolds-Number Regimes 5.6 Gas Lens Mechanics, Buoyancy Effects & Torch Flow Design 5.7 Hyperbaric, Vacuum & Controlled-Atmosphere Welding Environments

7 Chapter 6: Electrical Engineering Principles for Welding Systems

6.1 DC and AC Waveforms, Polarity Thermodynamics & Welding Circuit Analysis 6.2 Joule Heating, Electrode Stickout Preheating & Circuit Voltage Distribution 6.3 Power Factor, Reactance, Impedance & Magnetic Transformer Principles 6.4 Lorentz Force, Electromagnetic Pinch Effect & Arc Blow

8 Chapter 7: Welding Heat Sources & Arc Physics

7.1 Volt-Ampere Characteristics, Operating Point, Self-Regulation & OCV Limits 7.2 Inductance, Slope Control & Dynamic Power-Source Response 7.3 Arc Fall Regions, Cathode Emission Mechanisms & Shielding-Gas Ionization 7.4 Maecker Plasma Jet, Degree of Ionization & Anode Heat Partitioning 7.5 Droplet Force Balance & Classification of Metal Transfer Regimes 7.6 Transition Current, Mode Comparison & Pulsed Waveform Design

9 Chapter 8: Arc Welding Processes & Parameter Controls

8.1 Shielded Metal Arc Welding (SMAW): Electrode Flux Chemistries & Variables 8.2 GMAW Process Physics, Transfer Modes & Shielding Gas Interactions 8.3 Solid, Metal-Cored & Flux-Cored Wires with CTWD and Parameter Envelopes 8.4 Gas Tungsten (GTAW) & Plasma Arc Welding (PAW): Electrodes & Keyholing 8.5 Submerged Arc Welding (SAW): Flux Basicity, Multi-Wire & High-Deposition Systems

10 Chapter 9: Advanced, Resistance & Solid-State Joining Processes

9.1 High-Energy-Density Beam Physics & Electron Beam Welding 9.2 Laser Beam Welding, EBW/LBW Comparison & Fiber Laser Parameter Derivation 9.3 Resistance Welding Physics, Electrode Materials & Spot Weld Sequence 9.4 Nugget Sizing, Seam and Projection Welding, and Lobe Curve Process Windows 9.5 Solid-State Joining: Friction Stir Welding (FSW), Explosion & Diffusion 9.6 Thermal Cutting & Gouging: Oxyfuel, Plasma Arc and Air Carbon Arc 9.7 High-Frequency, Flash, Stud & Ultrasonic Welding; Surfacing and Thermal Spray

11 Chapter 10: Physical & Transformation Metallurgy of Steels

10.1 Fe-Fe3C System, Crystal Lattices, c/a Ratio & Interstitial Solubility 10.2 Critical Temperatures, Invariant Reactions & the Lever Rule 10.3 Alloying Elements, the Gamma Loop & Phase-Fraction Calculations 10.4 TTT and CCT Diagrams, Constitutional Supercooling & Scheil Microsegregation 10.5 Non-Equilibrium Transformation Products & Martensite Modeling 10.6 HAZ Anatomy, Microstructural Sub-Zones & Multi-Pass Reheated Regions 10.7 HAZ Hardness Traverses, Toughness Gradients & Peak-Temperature Control

12 Chapter 11: Weldability, Cracking Mechanisms & Alloy Metallurgy

11.1 Hydrogen Cracking Conditions, Carbon Equivalent & Diffusible Hydrogen Control 11.2 Preheat, Interpass and Post-Heat Calculations for Cold-Crack Prevention 11.3 Solidification Cracking, Bead Aspect Ratio, Liquation & Lamellar Tearing 11.4 Lamellar Tearing Mitigation & Hot-Cracking Susceptibility Evaluation 11.5 Stainless Families, Schaeffler and WRC-1992 Diagrams, Ferrite Number & Sensitization 11.6 Duplex Stainless Metallurgy & Dissimilar-Metal Ferrite Prediction 11.7 Aluminum Oxide and Porosity Control, and Titanium Reactive-Metal Welding 11.8 Nickel Superalloys, Strain-Age Cracking & Guinier-Preston Aging Sequences

13 Chapter 12: Weldment Design, Stress Analysis & Joint Mechanics

12.1 AWS A2.4 Welding Symbol Anatomy, Symbol Library & Dimension Syntax 12.2 Joint Architecture, CJP versus PJP, and NDE Examination Symbols 12.3 Fillet and Groove Weld Sizing under Direct Stress in ASD and LRFD 12.4 Plug and Slot Welds, Stress Gradients & the Fillet Weld Break Test 12.5 Eccentric Loading Analysis: Elastic Vector Method vs Instantaneous Center 12.6 Fatigue Design of Welded Connections & Residual Stress/Distortion Control

14 Chapter 13: Non-Destructive Examination (NDE) & Discontinuity Analysis

13.1 Visual Testing Gages & Liquid Penetrant Capillary Mechanics 13.2 Magnetic Particle Testing: Flux Leakage, Field Geometry & Prod Amperage 13.3 Radiographic Physics, Geometric Unsharpness, Density & IQI Sensitivity 13.4 Computed and Digital Radiography & Radiographic Discontinuity Interpretation 13.5 Acoustic Wave Mechanics, Refraction & Angle-Beam Sound-Path Geometry 13.6 AWS D1.1 Decibel Rating, Phased Array & Time-of-Flight Diffraction

15 Chapter 14: Brazing, Soldering & Industrial Welding Safety

14.1 Brazing Thermodynamics, Capillary Wetting Physics & Joint Clearance 14.2 AWS A5.8 Brazing Filler Metals, FB Fluxes & Industrial Heating Processes 14.3 Soldering Fundamentals, Flux Chemistries & Intermetallic Formation 14.4 Hierarchy of Controls, Electric Shock Physics & Industrial Ventilation 14.5 Fume Exposure Limits, Arc Radiation, Hot Work and Confined-Space Entry 14.6 Arc-Generated Toxic Gases, Moving-Equipment Hazards & TWA Exposure Calculation

16 Chapter 15: Structural Fabrication & AWS D1.1 Code Implementation

15.1 AWS D1.1 Scope, Prequalification Limits, Base-Metal Groups & Matching Filler 15.2 Prequalified Joint Details, Backing Systems & Joint Specification Verification 15.3 Thermal Cut Edges, Fit-Up Tolerances & Minimum Preheat Requirements 15.4 Preheat Application Zones, Measurement Instrumentation & Fabrication Audits 15.5 PWHT Fundamentals, D1.1 Thermal Cycles & Visual Acceptance Criteria 15.6 D1.1 Nondestructive Examination Protocols, PWHT Scheduling & Visual Audit Practice

17 Chapter 16: Welding Procedure Qualification (WPS & PQR) per ASME IX & AWS B2.1

16.1 PQR versus WPS Hierarchy, Qualification Workflow & Standard Procedures 16.2 Manufacturer Responsibility, Subcontracting Limits & Multi-Process Qualification 16.3 Essential, Supplementary Essential and Nonessential Variables with Heat Input Mechanics 16.4 Waveform-Controlled Power Sources, Appendix H & Heat-Input Compliance 16.5 P-Numbers, Group Numbers, F-Numbers & A-Numbers 16.6 QW-451 Mechanical Test Protocols & Procedure Qualification Test Evaluation

18 Chapter 17: Filler Metal Specifications, Selection & Consumable Control

17.1 AWS A5 Architecture: SMAW, GMAW/GTAW and FCAW Consumable Classifications 17.2 SAW Wire-Flux Systems, Alloy Pickup & PWHT Property Effects 17.3 Stainless Filler Specifications, Solidification Modes & Dissimilar-Metal Joints 17.4 AWS A5.10 Aluminum Filler Selection & Dilution and Ferrite-Number Calculations 17.5 Consumable Storage, Conditioning Envelopes & Atmospheric Exposure Limits 17.6 Low-Hydrogen Designators, the Yurioka Parameter & Preheat Sizing

19 Chapter 18: Welder Performance Qualification, Quality Management & Welding Economics

18.1 Welder Qualification Philosophy, Test Positions & Thickness and Diameter Ranges 18.2 F-Number Hierarchy, Operator Qualification & Continuity Requirements 18.3 ISO 3834, Welding Coordination, Inspection Test Plans & Equipment Validation 18.4 EN 10204 Material Certification, Traceability & Heat-Input Nonconformance Auditing 18.5 Weld Cost Anatomy, Deposition Rates, Operating Factor & the Overwelding Law 18.6 Economic Optimization Strategies & Fabrication Cost Comparison

9.4 Nugget Sizing, Seam and Projection Welding, and Lobe Curve Process Windows

Key Takeaways Explain This Topic AI

Expulsion occurs when internal molten nugget pressure exceeds the mechanical containment constraint provided by the surrounding plastic ring and electrode force, leading to severe mass loss, internal cavitation, and reduced fatigue strength.

A robust resistance welding process window is defined by the weld lobe curve, bounded on the lower boundary by the minimum acceptable nugget diameter (typically 4 * sqrt(t)) and on the upper boundary by the expulsion limit.

The lobe curve bounds the acceptable current-and-time combinations between undersized nuggets on one side and expulsion on the other.

Expulsion ejects molten metal from the faying surface, leaving voids and a smaller effective nugget, so it is a defect rather than a sign of adequate heat.

Projection welding concentrates current at a formed projection, which allows multiple welds in one stroke and reduces electrode wear relative to spot welding.

Last updated: September 2026

  • Nugget Penetration, Sizing & Expulsion Mechanics
  • Minimum Nugget Diameter

Under AWS D8.9 (Automotive), AWS D17.2 (Aerospace), and AWS C1.1, the nominal acceptable weld nugget diameter ( d n d_n d n ​ ) must satisfy: d min = 4 t d_{\text{min}} = 4 \sqrt{t} d min ​ = 4 t ​

where t t t is the single-sheet thickness of the thinner sheet in millimeters. For safety-critical automotive crash applications, specifications often enforce d critical = 5 t d_{\text{critical}} = 5 \sqrt{t} d critical ​ = 5 t ​ .

Target Penetration: Molten penetration must extend between 20 % 20\% 20% and 80 % 80\% 80% into each sheet. Penetration < 20 % <20\% < 20% indicates cold bonding, while > 80 % >80\% > 80% leads to surface overheating, severe indentation, and electrode degradation. [ Upper Electrode ]

  • +-----------------+
  • ==========| Indentation |========== Sheet 1 (t)
  • ( \ / )
  • ( | Nugget (d_n) | ) Penetration = 20% to 80% of t
  • ( / \ )
  • ==========| |========== Sheet 2 (t)
  • +-----------------+
  • [ Lower Electrode ]
  • Expulsion Mechanics

Expulsion (spatter) is the violent ejection of liquid metal from the weld nugget during the weld cycle. The physics of expulsion are governed by a containment force balance: P internal > σ containment P_{\text{internal}} > \sigma_{\text{containment}} P internal ​ > σ containment ​

where:

P internal P_{\text{internal}} P internal ​ is the hydrostatic expansion pressure of the superheated liquid molten pool plus trapped gases.

σ containment \sigma_{\text{containment}} σ containment ​ is the mechanical compressive seal provided by the plastic solid ring of metal surrounding the nugget, held shut by electrode clamping force F F F .

Primary Causes of Expulsion:

Excessive welding current ( I I I ) driving superheating and volumetric liquid expansion.

Insufficient electrode clamping force ( F F F ), weakening the solid containment ring.

Excessive weld time, allowing the molten nugget diameter to exceed the electrode contact face diameter.

Edge proximity (flange width too narrow), providing an easy escape path for molten metal.

Surface contamination (heavy oils, mill scale, excessive primer).

Consequences of Expulsion: Expulsion dramatically reduces nugget mass, generates severe internal void porosity, causes excessive electrode indentation, damages sheet surfaces, and cuts tensile-shear and cross-tension fatigue life by 20 % to 50 % 20\%\text{ to }50\% 20% to 50% .

Resistance Seam Welding (RSEW)

Resistance Seam Welding replaces pointed spot electrodes with motor-driven rotating copper alloy wheel electrodes (typically RWMA Class 2). [ Upper Rotating Wheel ]

  • ( ) -> Travel Direction
  • ============================== Workpiece Sheets
  • ( )
  • [ Lower Rotating Wheel ]
  • Operating Modes

Continuous Motion with Interrupted Current (Roll-Spot / Seam): Current pulses on and off while wheels rotate continuously. Each pulse creates an overlapping nugget. An overlap of 20 % to 50 % 20\%\text{ to }50\% 20% to 50% yields a hermetic, pressure-tight joint suitable for automotive fuel tanks, radiators, and pressure vessels.

Continuous Motion with Continuous Current: Current flows uninterrupted. Used for high-speed can manufacturing, but generates high heat accumulation that demands continuous water spray cooling directly onto the wheel-workpiece contact zone.

Step-Motion Seam Welding: Wheels stop rotation during the weld and hold pulses, then index forward during off time. Eliminates nugget tearing during cooling in crack-sensitive alloys (e.g., Inconel, stainless steel).

Resistance Projection Welding (RPW)

Resistance Projection Welding localizes current and force at pre-embossed dimples, coined buttons, or natural intersections, utilizing large, planar copper dies (RWMA Class 3 or Class 11). +----------------------------------+ Flat Upper Die

  • +----------------------------------+
  • ================== ================ Top Sheet
  • \/
  • ==================/\================ Embossed Projection
  • +----------------------------------+ Flat Lower Die
  • +----------------------------------+
  • Projection Configurations & Variants

Embossed Sheet Metal Projections: Hemispherical dimples stamped into one sheet. Multiple projections can be welded simultaneously in a single machine stroke, ensuring uniform load distribution without individual spot electrode tracking.

Solid / Machined Projections: Solid annular rings, chamfers, or pyramid projections machined into heavy fasteners, weld nuts, and studs.

Cross-Wire Welding: The orthogonal intersection of round wires naturally creates a point contact with minimal initial surface area. Applied in wire mesh, rebar cages, and shopping carts.

Collapse Dynamics

During the weld cycle, high current density heats the projection to its plastic forging temperature. Under die force, the projection yields and collapses flush into the parent sheet, producing solid-state forge bonding around a concentrated central molten nugget.

Lobe Curves & Process Windows

A weld lobe curve defines the envelope of acceptable operating parameters (typically Current vs. Time at a constant Force). It represents the certified operating window for quality assurance: Current (kA)

  • |
  • | /-----------------------------/ <-- Upper Lobe Boundary (Expulsion Limit)
  • | / /
  • | / ACCEPTABLE PROCESS /
  • | / WINDOW /
  • | / / <-- Lower Lobe Boundary (Min Nugget: d >= 4*sqrt(t))
  • | /-----------------------------/
  • +--------------------------------------------> Weld Time (Cycles)

Lower Boundary (Minimum Nugget Size): Below this line, heat input is insufficient to achieve d n ≥ 4 t d_n \ge 4\sqrt{t} d n ​ ≥ 4 t ​ , resulting in undersized nuggets or partial cold bonding.

Upper Boundary (Expulsion Limit): Above this line, excessive heat generation induces metal expulsion, internal voids, and electrode pitting.

Process Window Width: A wider lobe width (e.g., > 1.5 kA >1.5\text{ kA} > 1.5 kA current margin) indicates a robust process tolerant of tip wear and fit-up variations. Narrow lobe windows require closed-loop adaptive MFDC feedback controls.

  • Comprehensive Worked Numerical Example: Thermal Energy, Resistance & Efficiency Calculation
  • Problem Statement

An automotive body structure joins two 1.20 mm 1.20\text{ mm} 1.20 mm thick sheets of mild steel ( t = 1.20 mm t = 1.20\text{ mm} t = 1.20 mm ) using a Medium-Frequency Direct Current (MFDC) resistance spot welding machine. The qualified welding schedule specifies:

  • Welding current: I = 9 , 500 A I = 9,500\text{ A} I = 9 , 500 A
  • Weld time: t w = 200 ms = 0.200 s t_w = 200\text{ ms} = 0.200\text{ s} t w ​ = 200 ms = 0.200 s
  • Clamping force: F = 3.5 kN F = 3.5\text{ kN} F = 3.5 kN

Average dynamic electrical resistance: R dyn = 110 μ Ω = 1.10 × 10 − 4 Ω R_{\text{dyn}} = 110\ \mu\Omega = 1.10 \times 10^{-4}\ \Omega R dyn ​ = 110 μ Ω = 1.10 × 1 0 − 4 Ω

Steel properties: Density ρ = 7.85 × 10 − 3 g/mm 3 \rho = 7.85 \times 10^{-3}\text{ g/mm}^3 ρ = 7.85 × 1 0 − 3 g/mm 3 , specific heat c p = 670 J/(kg ⋅ K) c_p = 670\text{ J/(kg}\cdot\text{K)} c p ​ = 670 J/(kg ⋅ K) , ambient temperature T 0 = 20 ∘ C T_0 = 20^\circ\text{C} T 0 ​ = 2 0 ∘ C , melting point T m = 1530 ∘ C T_m = 1530^\circ\text{C} T m ​ = 153 0 ∘ C , latent heat of fusion L f = 270 kJ/kg = 2.70 × 10 5 J/kg L_f = 270\text{ kJ/kg} = 2.70 \times 10^5\text{ J/kg} L f ​ = 270 kJ/kg = 2.70 × 1 0 5 J/kg .

Calculate:

The minimum required nugget diameter ( d min d_{\text{min}} d min ​ ) per AWS D8.9.

The total electrical energy input ( Q electrical Q_{\text{electrical}} Q electrical ​ ) delivered by the machine.

The theoretical thermal energy ( Q melt Q_{\text{melt}} Q melt ​ ) required to heat and melt a cylindrical nugget of diameter d n = 5.0 mm d_n = 5.0\text{ mm} d n ​ = 5.0 mm and total fused height h = 1.68 mm h = 1.68\text{ mm} h = 1.68 mm ( 70 % 70\% 70% of total stack thickness 2 t 2t 2 t ).

The thermal efficiency ( η thermal \eta_{\text{thermal}} η thermal ​ ) of the spot welding process.

Step-by-Step Solution

Step 1: Calculate minimum allowable nugget diameter ( d min d_{\text{min}} d min ​ ) d min = 4 t = 4 1.20 mm = 4 × 1.0954 = 4.38 mm d_{\text{min}} = 4 \sqrt{t} = 4 \sqrt{1.20\text{ mm}} = 4 \times 1.0954 = 4.38\text{ mm} d min ​ = 4 t ​ = 4 1.20 mm ​ = 4 × 1.0954 = 4.38 mm

Because the actual targeted nugget is d n = 5.0 mm d_n = 5.0\text{ mm} d n ​ = 5.0 mm , it comfortably meets the AWS requirement.

Step 2: Calculate total electrical energy input ( Q electrical Q_{\text{electrical}} Q electrical ​ ) Q electrical = I 2 ⋅ R dyn ⋅ t w = ( 9500 A ) 2 × ( 1.10 × 10 − 4 Ω ) × 0.200 s Q_{\text{electrical}} = I^2 \cdot R_{\text{dyn}} \cdot t_w = (9500\text{ A})^2 \times (1.10 \times 10^{-4}\ \Omega) \times 0.200\text{ s} Q electrical ​ = I 2 ⋅ R dyn ​ ⋅ t w ​ = ( 9500 A ) 2 × ( 1.10 × 1 0 − 4 Ω ) × 0.200 s ( 9500 ) 2 = 90 , 250 , 000 A 2 (9500)^2 = 90,250,000\text{ A}^2 ( 9500 ) 2 = 90 , 250 , 000 A 2 Q electrical = 90 , 250 , 000 × 1.10 × 10 − 4 × 0.200 = 9 , 927.5 × 0.200 = 1 , 985.5 J Q_{\text{electrical}} = 90,250,000 \times 1.10 \times 10^{-4} \times 0.200 = 9,927.5 \times 0.200 = 1,985.5\text{ J} Q electrical ​ = 90 , 250 , 000 × 1.10 × 1 0 − 4 × 0.200 = 9 , 927.5 × 0.200 = 1 , 985.5 J

Step 3: Calculate theoretical thermal energy to form the molten nugget ( Q melt Q_{\text{melt}} Q melt ​ )

Nugget Volume: V n = π d n 2 4 ⋅ h = π ( 5.0 mm ) 2 4 × 1.68 mm = 19.635 × 1.68 = 32.987 mm 3 V_n = \frac{\pi d_n^2}{4} \cdot h = \frac{\pi (5.0\text{ mm})^2}{4} \times 1.68\text{ mm} = 19.635 \times 1.68 = 32.987\text{ mm}^3 V n ​ = 4 π d n 2 ​ ​ ⋅ h = 4 π ( 5.0 mm ) 2 ​ × 1.68 mm = 19.635 × 1.68 = 32.987 mm 3

Nugget Mass: m n = V n ⋅ ρ = 32.987 mm 3 × ( 7.85 × 10 − 3 g/mm 3 ) = 0.2589 g = 2.589 × 10 − 4 kg m_n = V_n \cdot \rho = 32.987\text{ mm}^3 \times (7.85 \times 10^{-3}\text{ g/mm}^3) = 0.2589\text{ g} = 2.589 \times 10^{-4}\text{ kg} m n ​ = V n ​ ⋅ ρ = 32.987 mm 3 × ( 7.85 × 1 0 − 3 g/mm 3 ) = 0.2589 g = 2.589 × 1 0 − 4 kg

Sensible heat to raise temperature from 20 ∘ C 20^\circ\text{C} 2 0 ∘ C to 1530 ∘ C 1530^\circ\text{C} 153 0 ∘ C ( Δ T = 1510 K \Delta T = 1510\text{ K} Δ T = 1510 K ): Q sensible = m n ⋅ c p ⋅ Δ T = ( 2.589 × 10 − 4 kg ) × ( 670 J/kg ⋅ K ) × 1510 K = 262.0 J Q_{\text{sensible}} = m_n \cdot c_p \cdot \Delta T = (2.589 \times 10^{-4}\text{ kg}) \times (670\text{ J/kg}\cdot\text{K}) \times 1510\text{ K} = 262.0\text{ J} Q sensible ​ = m n ​ ⋅ c p ​ ⋅ Δ T = ( 2.589 × 1 0 − 4 kg ) × ( 670 J/kg ⋅ K ) × 1510 K = 262.0 J

Latent heat of fusion: Q latent = m n ⋅ L f = ( 2.589 × 10 − 4 kg ) × ( 270 , 000 J/kg ) = 69.9 J Q_{\text{latent}} = m_n \cdot L_f = (2.589 \times 10^{-4}\text{ kg}) \times (270,000\text{ J/kg}) = 69.9\text{ J} Q latent ​ = m n ​ ⋅ L f ​ = ( 2.589 × 1 0 − 4 kg ) × ( 270 , 000 J/kg ) = 69.9 J

Total required melting energy: Q melt = Q sensible + Q latent = 262.0 J + 69.9 J = 331.9 J Q_{\text{melt}} = Q_{\text{sensible}} + Q_{\text{latent}} = 262.0\text{ J} + 69.9\text{ J} = 331.9\text{ J} Q melt ​ = Q sensible ​ + Q latent ​ = 262.0 J + 69.9 J = 331.9 J

Step 4: Calculate thermal efficiency ( η thermal \eta_{\text{thermal}} η thermal ​ ) η thermal = Q melt Q electrical = 331.9 J 1985.5 J = 0.1671 = 16.71 % \eta_{\text{thermal}} = \frac{Q_{\text{melt}}}{Q_{\text{electrical}}} = \frac{331.9\text{ J}}{1985.5\text{ J}} = 0.1671 = 16.71\% η thermal ​ = Q electrical ​ Q melt ​ ​ = 1985.5 J 331.9 J ​ = 0.1671 = 16.71%

Engineering Interpretation: Approximately 16.7 % 16.7\% 16.7% of the total electrical energy goes directly into melting the weld nugget. The remaining ∼ 83.3 % \sim 83.3\% ∼ 83.3% is conducted away into the water-cooled copper electrodes and surrounding sheet steel, demonstrating why electrode cooling water flow ( > 4 L/min >4\text{ L/min} > 4 L/min per tip) is vital.

  • Real-World Engineering Scenarios & Exam Pitfalls
  • Industrial Scenario: Galvanized High-Strength Steel Tip Erosion

An automotive plant launching a new crossover body line transitioned from uncoated steel to hot-dip galvanized (HDG) Dual-Phase steel (DP600). Within two production shifts, weld quality failed: severe expulsion occurred, nugget sizes dropped below 4 t 4\sqrt{t} 4 t ​ , and electrode tips showed heavy cratering. The plant metallurgist identified that zinc melts at 420 ∘ C 420^\circ\text{C} 42 0 ∘ C and forms brass alloys (Cu-Zn) with the RWMA Class 2 copper tips. The lower melting temperature of brass caused electrode face pitting and mushrooming, increasing electrode tip area by 40 % 40\% 40% and reducing current density below the nugget threshold. The welding engineer resolved the failure by:

Introducing automated pneumatic tip dressers every 150 spots to restore tip diameter.

Switching to dispersion-strengthened copper ( Cu-Al 2 O 3 {\text{Cu-Al}}_2\text{O}_3 Cu-Al 2 ​ O 3 ​ , RWMA C15760), which resists zinc alloying.

Incorporating a pre-pulse schedule to disperse the zinc coating before main current firing.

Common Exam Traps

Exam Trap 1: The Function of Hold Time A recurring exam trap asks what defect occurs if Hold Time is too short. Candidates often assume incomplete fusion or small nugget size. Nugget diameter is determined during Weld Time. Prematurely releasing hold force causes solidification cracking, internal shrinkage cavitation, and expulsion, because the nugget is still molten and lacks mechanical consolidation during freezing.

Exam Trap 2: Squeeze Time vs. Weld Initiation Squeeze time does not involve electric current. Initiating current during squeeze time before electrode force stabilizes creates severe surface arcing, destroying electrode faces and blowing holes through the workpiece.

Exam Trap 3: Electrode Material Selection for Projection Welding Candidates frequently select RWMA Class 2 electrodes for all resistance applications. For heavy projection welding dies, RWMA Class 3 or Group B refractory compositions (Class 10, 11) are required. Class 2 copper alloys lack sufficient compressive yield strength at elevated temperatures and deform (mushroom) rapidly under projection welding tonnages.