Study guide

Scoring, Composite Weighting, Eligibility & Five-Year Renewal

AWS CWEng Certified Welding Engineer Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & CWEng Exam Overview

About the CWEng Exam: Four Parts, 163 Questions & Testing Logistics Scoring, Composite Weighting, Eligibility & Five-Year Renewal How to Use This Guide & Build Your Open-Book Reference Set

2 Chapter 1: Mathematics & Statistics for Welding Engineers

1.1 Engineering Mathematics: Algebra, Trigonometry & Geometry in Weldments 1.2 Differential & Integral Calculus Fundamentals in Engineering Analysis 1.3 Applied Engineering Statistics, Population Distributions & Quality Metrics 1.4 Polynomial Equations, Conic Sections & Complex Numbers

3 Chapter 2: Physics Fundamentals & Mechanics

2.1 Unit Systems, Dimensional Analysis & Engineering Conversions 2.2 Mechanics: Statics, Equilibrium, Force Vectors & Moments 2.3 Work, Energy, Power & Mechanical Advantage in Welding Systems 2.4 Thermal Physics, Linear/Volumetric Expansion & Heat Capacity

4 Chapter 3: General & Physical Chemistry for Welding

3.1 Atomic Structure, Bonding & Solid-Solution Thermodynamics 3.2 Hume-Rothery Compatibility, Interstitial Strain & HSLA Microalloy Scavenging 3.3 Gas Laws, Dalton Partial Pressures, Arc Dissociation & Sieverts Law 3.4 Cylinder Capacity, Available Arc Time & Gas-Related Porosity Diagnosis 3.5 Redox Thermodynamics, Deoxidation & Slag-Metal Refining 3.6 Basicity Index Calculations, Toughness Prediction & Cryogenic Consumable Selection

5 Chapter 4: Strength of Materials & Mechanics of Materials

4.1 Engineering vs. True Stress-Strain, Elastic Constants & Z-Direction Ductility 4.2 Plane Stress vs. Plane Strain, Triaxial Restraint & Alloy Property Comparison 4.3 Beam Bending, Transverse Shear, Torsion & Mohr Circle Construction 4.4 Multiaxial Yield Criteria & Combined-Load Analysis of Welded Members 4.5 Fatigue Life, Weld-Toe Stress Concentration & Paris-Erdogan Crack Growth 4.6 LEFM Fracture Toughness, Ductile-Brittle Transition & Larson-Miller Creep 4.7 Comparative Failure-Mode Synthesis & Integrated Flaw and Creep Assessment

6 Chapter 5: Heat Transfer & Fluid Mechanics in Welding

5.1 Fourier Conduction, Rosenthal Moving Heat Source & 2D vs. 3D Heat Flow 5.2 Adams Cooling Rate, the t8/5 Window & HAZ Peak-Temperature Distribution 5.3 Convection, Stefan-Boltzmann Radiation & Emissivity of Weld Surfaces 5.4 Arc Radiation Losses, Preheat Maintenance & PWHT Boundary Conditions 5.5 Fluid Statics, Bernoulli, Viscosity & Reynolds-Number Regimes 5.6 Gas Lens Mechanics, Buoyancy Effects & Torch Flow Design 5.7 Hyperbaric, Vacuum & Controlled-Atmosphere Welding Environments

7 Chapter 6: Electrical Engineering Principles for Welding Systems

6.1 DC and AC Waveforms, Polarity Thermodynamics & Welding Circuit Analysis 6.2 Joule Heating, Electrode Stickout Preheating & Circuit Voltage Distribution 6.3 Power Factor, Reactance, Impedance & Magnetic Transformer Principles 6.4 Lorentz Force, Electromagnetic Pinch Effect & Arc Blow

8 Chapter 7: Welding Heat Sources & Arc Physics

7.1 Volt-Ampere Characteristics, Operating Point, Self-Regulation & OCV Limits 7.2 Inductance, Slope Control & Dynamic Power-Source Response 7.3 Arc Fall Regions, Cathode Emission Mechanisms & Shielding-Gas Ionization 7.4 Maecker Plasma Jet, Degree of Ionization & Anode Heat Partitioning 7.5 Droplet Force Balance & Classification of Metal Transfer Regimes 7.6 Transition Current, Mode Comparison & Pulsed Waveform Design

9 Chapter 8: Arc Welding Processes & Parameter Controls

8.1 Shielded Metal Arc Welding (SMAW): Electrode Flux Chemistries & Variables 8.2 GMAW Process Physics, Transfer Modes & Shielding Gas Interactions 8.3 Solid, Metal-Cored & Flux-Cored Wires with CTWD and Parameter Envelopes 8.4 Gas Tungsten (GTAW) & Plasma Arc Welding (PAW): Electrodes & Keyholing 8.5 Submerged Arc Welding (SAW): Flux Basicity, Multi-Wire & High-Deposition Systems

10 Chapter 9: Advanced, Resistance & Solid-State Joining Processes

9.1 High-Energy-Density Beam Physics & Electron Beam Welding 9.2 Laser Beam Welding, EBW/LBW Comparison & Fiber Laser Parameter Derivation 9.3 Resistance Welding Physics, Electrode Materials & Spot Weld Sequence 9.4 Nugget Sizing, Seam and Projection Welding, and Lobe Curve Process Windows 9.5 Solid-State Joining: Friction Stir Welding (FSW), Explosion & Diffusion 9.6 Thermal Cutting & Gouging: Oxyfuel, Plasma Arc and Air Carbon Arc 9.7 High-Frequency, Flash, Stud & Ultrasonic Welding; Surfacing and Thermal Spray

11 Chapter 10: Physical & Transformation Metallurgy of Steels

10.1 Fe-Fe3C System, Crystal Lattices, c/a Ratio & Interstitial Solubility 10.2 Critical Temperatures, Invariant Reactions & the Lever Rule 10.3 Alloying Elements, the Gamma Loop & Phase-Fraction Calculations 10.4 TTT and CCT Diagrams, Constitutional Supercooling & Scheil Microsegregation 10.5 Non-Equilibrium Transformation Products & Martensite Modeling 10.6 HAZ Anatomy, Microstructural Sub-Zones & Multi-Pass Reheated Regions 10.7 HAZ Hardness Traverses, Toughness Gradients & Peak-Temperature Control

12 Chapter 11: Weldability, Cracking Mechanisms & Alloy Metallurgy

11.1 Hydrogen Cracking Conditions, Carbon Equivalent & Diffusible Hydrogen Control 11.2 Preheat, Interpass and Post-Heat Calculations for Cold-Crack Prevention 11.3 Solidification Cracking, Bead Aspect Ratio, Liquation & Lamellar Tearing 11.4 Lamellar Tearing Mitigation & Hot-Cracking Susceptibility Evaluation 11.5 Stainless Families, Schaeffler and WRC-1992 Diagrams, Ferrite Number & Sensitization 11.6 Duplex Stainless Metallurgy & Dissimilar-Metal Ferrite Prediction 11.7 Aluminum Oxide and Porosity Control, and Titanium Reactive-Metal Welding 11.8 Nickel Superalloys, Strain-Age Cracking & Guinier-Preston Aging Sequences

13 Chapter 12: Weldment Design, Stress Analysis & Joint Mechanics

12.1 AWS A2.4 Welding Symbol Anatomy, Symbol Library & Dimension Syntax 12.2 Joint Architecture, CJP versus PJP, and NDE Examination Symbols 12.3 Fillet and Groove Weld Sizing under Direct Stress in ASD and LRFD 12.4 Plug and Slot Welds, Stress Gradients & the Fillet Weld Break Test 12.5 Eccentric Loading Analysis: Elastic Vector Method vs Instantaneous Center 12.6 Fatigue Design of Welded Connections & Residual Stress/Distortion Control

14 Chapter 13: Non-Destructive Examination (NDE) & Discontinuity Analysis

13.1 Visual Testing Gages & Liquid Penetrant Capillary Mechanics 13.2 Magnetic Particle Testing: Flux Leakage, Field Geometry & Prod Amperage 13.3 Radiographic Physics, Geometric Unsharpness, Density & IQI Sensitivity 13.4 Computed and Digital Radiography & Radiographic Discontinuity Interpretation 13.5 Acoustic Wave Mechanics, Refraction & Angle-Beam Sound-Path Geometry 13.6 AWS D1.1 Decibel Rating, Phased Array & Time-of-Flight Diffraction

15 Chapter 14: Brazing, Soldering & Industrial Welding Safety

14.1 Brazing Thermodynamics, Capillary Wetting Physics & Joint Clearance 14.2 AWS A5.8 Brazing Filler Metals, FB Fluxes & Industrial Heating Processes 14.3 Soldering Fundamentals, Flux Chemistries & Intermetallic Formation 14.4 Hierarchy of Controls, Electric Shock Physics & Industrial Ventilation 14.5 Fume Exposure Limits, Arc Radiation, Hot Work and Confined-Space Entry 14.6 Arc-Generated Toxic Gases, Moving-Equipment Hazards & TWA Exposure Calculation

16 Chapter 15: Structural Fabrication & AWS D1.1 Code Implementation

15.1 AWS D1.1 Scope, Prequalification Limits, Base-Metal Groups & Matching Filler 15.2 Prequalified Joint Details, Backing Systems & Joint Specification Verification 15.3 Thermal Cut Edges, Fit-Up Tolerances & Minimum Preheat Requirements 15.4 Preheat Application Zones, Measurement Instrumentation & Fabrication Audits 15.5 PWHT Fundamentals, D1.1 Thermal Cycles & Visual Acceptance Criteria 15.6 D1.1 Nondestructive Examination Protocols, PWHT Scheduling & Visual Audit Practice

17 Chapter 16: Welding Procedure Qualification (WPS & PQR) per ASME IX & AWS B2.1

16.1 PQR versus WPS Hierarchy, Qualification Workflow & Standard Procedures 16.2 Manufacturer Responsibility, Subcontracting Limits & Multi-Process Qualification 16.3 Essential, Supplementary Essential and Nonessential Variables with Heat Input Mechanics 16.4 Waveform-Controlled Power Sources, Appendix H & Heat-Input Compliance 16.5 P-Numbers, Group Numbers, F-Numbers & A-Numbers 16.6 QW-451 Mechanical Test Protocols & Procedure Qualification Test Evaluation

18 Chapter 17: Filler Metal Specifications, Selection & Consumable Control

17.1 AWS A5 Architecture: SMAW, GMAW/GTAW and FCAW Consumable Classifications 17.2 SAW Wire-Flux Systems, Alloy Pickup & PWHT Property Effects 17.3 Stainless Filler Specifications, Solidification Modes & Dissimilar-Metal Joints 17.4 AWS A5.10 Aluminum Filler Selection & Dilution and Ferrite-Number Calculations 17.5 Consumable Storage, Conditioning Envelopes & Atmospheric Exposure Limits 17.6 Low-Hydrogen Designators, the Yurioka Parameter & Preheat Sizing

19 Chapter 18: Welder Performance Qualification, Quality Management & Welding Economics

18.1 Welder Qualification Philosophy, Test Positions & Thickness and Diameter Ranges 18.2 F-Number Hierarchy, Operator Qualification & Continuity Requirements 18.3 ISO 3834, Welding Coordination, Inspection Test Plans & Equipment Validation 18.4 EN 10204 Material Certification, Traceability & Heat-Input Nonconformance Auditing 18.5 Weld Cost Anatomy, Deposition Rates, Operating Factor & the Overwelding Law 18.6 Economic Optimization Strategies & Fabrication Cost Comparison

Scoring, Composite Weighting, Eligibility & Five-Year Renewal

Key Takeaways Explain This Topic AI

AWS B5.16 Clause 9.5 requires a score of at least 60% on each of the four parts and a weighted composite of at least 70% across all four.

Composite weights are 0.15 for Part 1, 0.15 for Part 2, 0.30 for Part 3 and 0.40 for Part 4, so Parts 3 and 4 together control 70% of the composite score.

Clause 9.6 allows the Engineering Fundamentals (formerly EIT) examination to satisfy the basic and applied science requirement, scored as 85 multiplied by 0.30.

Eligibility routes range from a B.Sc. in engineering with one year of experience to a high school diploma with fifteen years of welding-based experience.

The CWEng credential is valid for five years and is renewed with 80 contact hours of continued education related to the Clause 5 functions of a welding engineer.

Last updated: September 2026

Two Bars, Not One

The single most misunderstood feature of the CWEng is that there are two independent passing requirements , stated in AWS B5.16 Clause 9.5:

Each of the four examinations shall not have an individual score less than sixty percent (60%).

The weighted composite score from all four shall not be less than seventy percent (70%).

Clearing 60% on every part is therefore necessary but not sufficient. A candidate can pass all four parts individually and still fail to earn the credential because the composite lands below 70%. AWS reports each score rounded down to the nearest lower whole percent , so 59.8% is reported as 59% and fails.

The Composite Weighting Arithmetic

The four raw scores are not averaged. Each is multiplied by a fixed weight from Clause 9.5:

  • Examination Weight Weighted score
  • Part 1 — Basic Science 0.15 Raw score x 0.15
  • Part 2 — Applied Science 0.15 Raw score x 0.15
  • Part 3 — Welding Related Disciplines 0.30 Raw score x 0.30

Part 4 — Practical Applications 0.40 Raw score x 0.40 Composite = 0.15 S 1 + 0.15 S 2 + 0.30 S 3 + 0.40 S 4 \text{Composite} = 0.15 S_1 + 0.15 S_2 + 0.30 S_3 + 0.40 S_4 Composite = 0.15 S 1 ​ + 0.15 S 2 ​ + 0.30 S 3 ​ + 0.40 S 4 ​

Parts 3 and 4 together carry 0.70 of the composite. Part 4 alone carries more weight than Parts 1 and 2 combined. That is the single most actionable planning fact in the whole credential: the closed-book science sections must be passed, but the open-book welding sections are where the credential is actually won.

Worked Example: Passing Every Part and Still Failing

A candidate scores Part 1 = 62%, Part 2 = 61%, Part 3 = 68%, Part 4 = 66%. Every part clears the 60% bar. Composite = 0.15 ( 62 ) + 0.15 ( 61 ) + 0.30 ( 68 ) + 0.40 ( 66 ) \text{Composite} = 0.15(62) + 0.15(61) + 0.30(68) + 0.40(66) Composite = 0.15 ( 62 ) + 0.15 ( 61 ) + 0.30 ( 68 ) + 0.40 ( 66 ) = 9.30 + 9.15 + 20.40 + 26.40 = 65.25 % = 9.30 + 9.15 + 20.40 + 26.40 = 65.25\% = 9.30 + 9.15 + 20.40 + 26.40 = 65.25%

Reported as 65% — below the 70% composite requirement. The credential is not awarded. AWS policy allows this candidate to retest any part they choose in order to raise the composite, which is a genuinely strategic decision: because Part 4 carries a 0.40 weight, ten extra points on Part 4 add 4.0 points to the composite, while ten extra points on Part 1 add only 1.5.

Worked Example: The Minimum Viable Profile

Suppose Parts 1 and 2 are both scraped at 60%. What is required of Parts 3 and 4? 0.15 ( 60 ) + 0.15 ( 60 ) = 18.0 0.15(60) + 0.15(60) = 18.0 0.15 ( 60 ) + 0.15 ( 60 ) = 18.0

The remaining 52.0 points must come from 0.30 S 3 + 0.40 S 4 0.30 S_3 + 0.40 S_4 0.30 S 3 ​ + 0.40 S 4 ​ . If Part 3 is also 60%, then 0.30 ( 60 ) = 18.0 0.30(60) = 18.0 0.30 ( 60 ) = 18.0 , leaving 0.40 S 4 ≥ 34.0 0.40 S_4 \ge 34.0 0.40 S 4 ​ ≥ 34.0 , so S 4 ≥ 85 % S_4 \ge 85\% S 4 ​ ≥ 85% . A candidate who does the minimum everywhere else needs an 85% on Part 4.

The FE / EIT Substitution (Clause 9.6)

B5.16 Clause 9.6 permits the Engineering Fundamentals Examination — formerly the Engineer-in-Training (EIT) examination, administered by a State Board of Engineering or equivalent government entity — to satisfy the basic and applied science portion of the requirements. When this route is used, the calculation becomes: Composite = 0.30 ( 85 ) + 0.30 S 3 + 0.40 S 4 \text{Composite} = 0.30(85) + 0.30 S_3 + 0.40 S_4 Composite = 0.30 ( 85 ) + 0.30 S 3 ​ + 0.40 S 4 ​

The FE substitution is credited as a fixed 85 multiplied by 0.30 , which is 25.5 composite points in place of Parts 1 and 2. That is generous relative to the 18.0 points a candidate earns by scraping both parts at 60%, and it eliminates two closed-book exams. For any candidate who already holds FE certification, this is usually the correct route.

Eligibility: Education and Experience

B5.16 Clause 6.1 defines five combinations, any one of which makes a candidate eligible:

  • Education Minimum related experience
  • B.Sc. or higher in engineering 1 year
  • B.Sc. in engineering technology 2 years
  • Other related B.Sc. degree 5 years
  • Associate in Applied Science (A.A.S.) 10 years
  • High school diploma or equivalent 15 years

Clause 7.1 defines qualifying experience as activity in manufacturing, fabrication, construction, research and development, or training — so teaching welding technology counts, and so does process development work that never touches a production floor.

Two alternate routes appear in Clause 7:

Clause 7.2 — an individual holding a State Professional Engineering Licence in Welding Engineering is qualified in accordance with the specification without further evaluation of education, experience or examination.

Clause 7.3 — an individual holding an International Welding Engineer (IIW) or European Welding Engineer (EWF) diploma needs a minimum of one year of experience, obtainable before or after the diploma, to be eligible for the examination.

Important limitation stated by AWS. Qualification to B5.16 alone may not legally qualify an engineer to provide technical services to the public, and the CWEng designation does not imply the status of a registered Professional Engineer under the laws of any state or other governmental entity.

Renewal and Recertification

The CWEng credential is valid for five years from the date of issue. Renewal under B5.16 Clause 10 requires demonstrated continued education:

80 contact hours within the five-year period, or a combination of contact hours plus continuing education units totalling 80 contact hours.

The education must relate to the welding engineer functions defined in Clause 5 — safety, design, materials and welding metallurgy, quality control and inspection, manufacturing systems, mathematics, physics and chemistry.

Renewal is submitted through the AWS Certification Application Portal. A 30-day administrative grace period applies after expiration; beyond it, the full application process restarts.

Exam Traps in the Scoring Rules

Trap 1: Averaging the four scores. The composite is a weighted sum with weights 0.15, 0.15, 0.30 and 0.40 — not an arithmetic mean and not an item-count weighting. An unweighted average of the example above gives 64.25%, which is close enough to the correct 65.25% to feel right and is still the wrong method.

Trap 2: Assuming 60% on every part earns the credential. Scoring exactly 60% on all four parts produces a composite of exactly 60%, which fails the 70% requirement outright.

Trap 3: Reading the FE substitution as a pass mark. The 85 in Clause 9.6 is not a score the candidate achieved; it is the fixed credit value the specification assigns to the FE examination, and it is multiplied by 0.30, not 0.15.