Study guide

How to Use This Guide & Build Your Open-Book Reference Set

AWS CWEng Certified Welding Engineer Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & CWEng Exam Overview

About the CWEng Exam: Four Parts, 163 Questions & Testing Logistics Scoring, Composite Weighting, Eligibility & Five-Year Renewal How to Use This Guide & Build Your Open-Book Reference Set

2 Chapter 1: Mathematics & Statistics for Welding Engineers

1.1 Engineering Mathematics: Algebra, Trigonometry & Geometry in Weldments 1.2 Differential & Integral Calculus Fundamentals in Engineering Analysis 1.3 Applied Engineering Statistics, Population Distributions & Quality Metrics 1.4 Polynomial Equations, Conic Sections & Complex Numbers

3 Chapter 2: Physics Fundamentals & Mechanics

2.1 Unit Systems, Dimensional Analysis & Engineering Conversions 2.2 Mechanics: Statics, Equilibrium, Force Vectors & Moments 2.3 Work, Energy, Power & Mechanical Advantage in Welding Systems 2.4 Thermal Physics, Linear/Volumetric Expansion & Heat Capacity

4 Chapter 3: General & Physical Chemistry for Welding

3.1 Atomic Structure, Bonding & Solid-Solution Thermodynamics 3.2 Hume-Rothery Compatibility, Interstitial Strain & HSLA Microalloy Scavenging 3.3 Gas Laws, Dalton Partial Pressures, Arc Dissociation & Sieverts Law 3.4 Cylinder Capacity, Available Arc Time & Gas-Related Porosity Diagnosis 3.5 Redox Thermodynamics, Deoxidation & Slag-Metal Refining 3.6 Basicity Index Calculations, Toughness Prediction & Cryogenic Consumable Selection

5 Chapter 4: Strength of Materials & Mechanics of Materials

4.1 Engineering vs. True Stress-Strain, Elastic Constants & Z-Direction Ductility 4.2 Plane Stress vs. Plane Strain, Triaxial Restraint & Alloy Property Comparison 4.3 Beam Bending, Transverse Shear, Torsion & Mohr Circle Construction 4.4 Multiaxial Yield Criteria & Combined-Load Analysis of Welded Members 4.5 Fatigue Life, Weld-Toe Stress Concentration & Paris-Erdogan Crack Growth 4.6 LEFM Fracture Toughness, Ductile-Brittle Transition & Larson-Miller Creep 4.7 Comparative Failure-Mode Synthesis & Integrated Flaw and Creep Assessment

6 Chapter 5: Heat Transfer & Fluid Mechanics in Welding

5.1 Fourier Conduction, Rosenthal Moving Heat Source & 2D vs. 3D Heat Flow 5.2 Adams Cooling Rate, the t8/5 Window & HAZ Peak-Temperature Distribution 5.3 Convection, Stefan-Boltzmann Radiation & Emissivity of Weld Surfaces 5.4 Arc Radiation Losses, Preheat Maintenance & PWHT Boundary Conditions 5.5 Fluid Statics, Bernoulli, Viscosity & Reynolds-Number Regimes 5.6 Gas Lens Mechanics, Buoyancy Effects & Torch Flow Design 5.7 Hyperbaric, Vacuum & Controlled-Atmosphere Welding Environments

7 Chapter 6: Electrical Engineering Principles for Welding Systems

6.1 DC and AC Waveforms, Polarity Thermodynamics & Welding Circuit Analysis 6.2 Joule Heating, Electrode Stickout Preheating & Circuit Voltage Distribution 6.3 Power Factor, Reactance, Impedance & Magnetic Transformer Principles 6.4 Lorentz Force, Electromagnetic Pinch Effect & Arc Blow

8 Chapter 7: Welding Heat Sources & Arc Physics

7.1 Volt-Ampere Characteristics, Operating Point, Self-Regulation & OCV Limits 7.2 Inductance, Slope Control & Dynamic Power-Source Response 7.3 Arc Fall Regions, Cathode Emission Mechanisms & Shielding-Gas Ionization 7.4 Maecker Plasma Jet, Degree of Ionization & Anode Heat Partitioning 7.5 Droplet Force Balance & Classification of Metal Transfer Regimes 7.6 Transition Current, Mode Comparison & Pulsed Waveform Design

9 Chapter 8: Arc Welding Processes & Parameter Controls

8.1 Shielded Metal Arc Welding (SMAW): Electrode Flux Chemistries & Variables 8.2 GMAW Process Physics, Transfer Modes & Shielding Gas Interactions 8.3 Solid, Metal-Cored & Flux-Cored Wires with CTWD and Parameter Envelopes 8.4 Gas Tungsten (GTAW) & Plasma Arc Welding (PAW): Electrodes & Keyholing 8.5 Submerged Arc Welding (SAW): Flux Basicity, Multi-Wire & High-Deposition Systems

10 Chapter 9: Advanced, Resistance & Solid-State Joining Processes

9.1 High-Energy-Density Beam Physics & Electron Beam Welding 9.2 Laser Beam Welding, EBW/LBW Comparison & Fiber Laser Parameter Derivation 9.3 Resistance Welding Physics, Electrode Materials & Spot Weld Sequence 9.4 Nugget Sizing, Seam and Projection Welding, and Lobe Curve Process Windows 9.5 Solid-State Joining: Friction Stir Welding (FSW), Explosion & Diffusion 9.6 Thermal Cutting & Gouging: Oxyfuel, Plasma Arc and Air Carbon Arc 9.7 High-Frequency, Flash, Stud & Ultrasonic Welding; Surfacing and Thermal Spray

11 Chapter 10: Physical & Transformation Metallurgy of Steels

10.1 Fe-Fe3C System, Crystal Lattices, c/a Ratio & Interstitial Solubility 10.2 Critical Temperatures, Invariant Reactions & the Lever Rule 10.3 Alloying Elements, the Gamma Loop & Phase-Fraction Calculations 10.4 TTT and CCT Diagrams, Constitutional Supercooling & Scheil Microsegregation 10.5 Non-Equilibrium Transformation Products & Martensite Modeling 10.6 HAZ Anatomy, Microstructural Sub-Zones & Multi-Pass Reheated Regions 10.7 HAZ Hardness Traverses, Toughness Gradients & Peak-Temperature Control

12 Chapter 11: Weldability, Cracking Mechanisms & Alloy Metallurgy

11.1 Hydrogen Cracking Conditions, Carbon Equivalent & Diffusible Hydrogen Control 11.2 Preheat, Interpass and Post-Heat Calculations for Cold-Crack Prevention 11.3 Solidification Cracking, Bead Aspect Ratio, Liquation & Lamellar Tearing 11.4 Lamellar Tearing Mitigation & Hot-Cracking Susceptibility Evaluation 11.5 Stainless Families, Schaeffler and WRC-1992 Diagrams, Ferrite Number & Sensitization 11.6 Duplex Stainless Metallurgy & Dissimilar-Metal Ferrite Prediction 11.7 Aluminum Oxide and Porosity Control, and Titanium Reactive-Metal Welding 11.8 Nickel Superalloys, Strain-Age Cracking & Guinier-Preston Aging Sequences

13 Chapter 12: Weldment Design, Stress Analysis & Joint Mechanics

12.1 AWS A2.4 Welding Symbol Anatomy, Symbol Library & Dimension Syntax 12.2 Joint Architecture, CJP versus PJP, and NDE Examination Symbols 12.3 Fillet and Groove Weld Sizing under Direct Stress in ASD and LRFD 12.4 Plug and Slot Welds, Stress Gradients & the Fillet Weld Break Test 12.5 Eccentric Loading Analysis: Elastic Vector Method vs Instantaneous Center 12.6 Fatigue Design of Welded Connections & Residual Stress/Distortion Control

14 Chapter 13: Non-Destructive Examination (NDE) & Discontinuity Analysis

13.1 Visual Testing Gages & Liquid Penetrant Capillary Mechanics 13.2 Magnetic Particle Testing: Flux Leakage, Field Geometry & Prod Amperage 13.3 Radiographic Physics, Geometric Unsharpness, Density & IQI Sensitivity 13.4 Computed and Digital Radiography & Radiographic Discontinuity Interpretation 13.5 Acoustic Wave Mechanics, Refraction & Angle-Beam Sound-Path Geometry 13.6 AWS D1.1 Decibel Rating, Phased Array & Time-of-Flight Diffraction

15 Chapter 14: Brazing, Soldering & Industrial Welding Safety

14.1 Brazing Thermodynamics, Capillary Wetting Physics & Joint Clearance 14.2 AWS A5.8 Brazing Filler Metals, FB Fluxes & Industrial Heating Processes 14.3 Soldering Fundamentals, Flux Chemistries & Intermetallic Formation 14.4 Hierarchy of Controls, Electric Shock Physics & Industrial Ventilation 14.5 Fume Exposure Limits, Arc Radiation, Hot Work and Confined-Space Entry 14.6 Arc-Generated Toxic Gases, Moving-Equipment Hazards & TWA Exposure Calculation

16 Chapter 15: Structural Fabrication & AWS D1.1 Code Implementation

15.1 AWS D1.1 Scope, Prequalification Limits, Base-Metal Groups & Matching Filler 15.2 Prequalified Joint Details, Backing Systems & Joint Specification Verification 15.3 Thermal Cut Edges, Fit-Up Tolerances & Minimum Preheat Requirements 15.4 Preheat Application Zones, Measurement Instrumentation & Fabrication Audits 15.5 PWHT Fundamentals, D1.1 Thermal Cycles & Visual Acceptance Criteria 15.6 D1.1 Nondestructive Examination Protocols, PWHT Scheduling & Visual Audit Practice

17 Chapter 16: Welding Procedure Qualification (WPS & PQR) per ASME IX & AWS B2.1

16.1 PQR versus WPS Hierarchy, Qualification Workflow & Standard Procedures 16.2 Manufacturer Responsibility, Subcontracting Limits & Multi-Process Qualification 16.3 Essential, Supplementary Essential and Nonessential Variables with Heat Input Mechanics 16.4 Waveform-Controlled Power Sources, Appendix H & Heat-Input Compliance 16.5 P-Numbers, Group Numbers, F-Numbers & A-Numbers 16.6 QW-451 Mechanical Test Protocols & Procedure Qualification Test Evaluation

18 Chapter 17: Filler Metal Specifications, Selection & Consumable Control

17.1 AWS A5 Architecture: SMAW, GMAW/GTAW and FCAW Consumable Classifications 17.2 SAW Wire-Flux Systems, Alloy Pickup & PWHT Property Effects 17.3 Stainless Filler Specifications, Solidification Modes & Dissimilar-Metal Joints 17.4 AWS A5.10 Aluminum Filler Selection & Dilution and Ferrite-Number Calculations 17.5 Consumable Storage, Conditioning Envelopes & Atmospheric Exposure Limits 17.6 Low-Hydrogen Designators, the Yurioka Parameter & Preheat Sizing

19 Chapter 18: Welder Performance Qualification, Quality Management & Welding Economics

18.1 Welder Qualification Philosophy, Test Positions & Thickness and Diameter Ranges 18.2 F-Number Hierarchy, Operator Qualification & Continuity Requirements 18.3 ISO 3834, Welding Coordination, Inspection Test Plans & Equipment Validation 18.4 EN 10204 Material Certification, Traceability & Heat-Input Nonconformance Auditing 18.5 Weld Cost Anatomy, Deposition Rates, Operating Factor & the Overwelding Law 18.6 Economic Optimization Strategies & Fabrication Cost Comparison

How to Use This Guide & Build Your Open-Book Reference Set

Key Takeaways Explain This Topic AI

Chapters 1 to 3 cover the Part 1 closed-book science domains, Chapters 4 to 6 cover Part 2, Chapters 7 to 14 cover Part 3, and Chapters 15 to 18 cover Part 4.

Part 3 questions are drawn from a published reference list: ANSI Z49.1, AWS Welding Handbook Volumes 1 to 5, Blodgett’s Design of Weldments, and Lippold & Kotecki on stainless steels.

Part 4 permits only AWS D1.1/D1.1M, 24th Edition, 2020, so tabbing that one book for navigation speed is the highest-value Part 4 preparation task.

Composite weighting of 0.30 for Part 3 and 0.40 for Part 4 means study time should be allocated toward the open-book welding parts rather than evenly across all four.

Both open-book parts run at roughly three minutes per question, so references are for confirming numbers rather than for learning material during the exam.

Last updated: September 2026

How This Guide Maps to the Official Exam

The chapters follow the four parts in the order AWS examines them, and every chapter traces to a clause of the AWS B5.16-2006 Body of Knowledge.

  • Chapters Exam part B5.16 clauses covered
  • 1 Mathematics, 2 Physics, 3 Chemistry Part 1 (closed book) 8.1.1, 8.1.2, 8.1.3

4 Strength of Materials, 5 Heat Transfer & Fluid Mechanics, 6 Electricity Part 2 (closed book) 8.2.1, 8.2.2, 8.2.3

7 Heat Sources & Arc Physics, 8 Arc Processes, 9 Advanced & Solid-State Processes Part 3 (open book) 8.3.2, 8.3.3

  • 10 Steel Metallurgy, 11 Weldability & Cracking Part 3 (open book) 8.3.4
  • 12 Weld Design Part 3 (open book) 8.3.5
  • 13 NDE & Discontinuities Part 3 (open book) 8.3.1
  • 14 Brazing, Soldering & Safety Part 3 (open book) 8.3.6, 8.3.7
  • 15 Structural Fabrication (D1.1) Part 4 (open book) Fabrication, Inspection
  • 16 WPS & PQR Qualification Part 4 (open book) Welding Procedure Qualification
  • 17 Filler Metals & Consumables Part 4 (open book) Filler Metals
  • 18 Welder Qualification, Quality & Economics Part 4 (open book) Welder Performance Qualification, Productivity
  • Allocating Study Time by Composite Weight, Not by Item Count

A common planning error is to divide study time by question count. The composite weights tell a different story:

  • Part Items Share of items Composite weight Share of score
  • 1 36 22% 0.15 15%
  • 2 27 17% 0.15 15%
  • 3 60 37% 0.30 30%
  • 4 40 25% 0.40 40%

Part 4 has 40 questions — a quarter of the items — but 40% of the score. Each Part 4 question is worth roughly 2.4 times as much composite credit as each Part 1 question. Study plans should be weighted accordingly, while still respecting that a sub-60% result on any single part is fatal regardless of the composite.

Building the Part 3 Reference Set

AWS publishes the exact books from which Part 3 questions are drawn, and candidates may bring hard copies to the test centre:

ANSI Z49.1 , Safety in Welding, Cutting and Allied Processes — free PDF from AWS. Covers the 5% Safety domain almost in full.

AWS Welding Handbook Volume 1 (9th or 10th edition) — welding science and technology; the primary source for the 20% arc physics domain.

AWS Welding Handbook Volume 2 (9th edition) — welding processes, part 1 (arc processes).

AWS Welding Handbook Volume 3 (9th edition) — welding processes, part 2 (resistance, solid-state, high-energy beam, brazing and soldering).

AWS Welding Handbook Volumes 4 and 5 (9th edition) — materials and applications; the metallurgy and weldability domain.

Blodgett , Design of Weldments — the standard source for the 20% weld design domain.

Lippold & Kotecki , Welding Metallurgy and Weldability of Stainless Steels — constitution diagrams, ferrite number, solidification modes.

Tabbing Strategy

At three minutes per question, you cannot browse. Tab by question type , not by chapter title:

Arc physics: volt-ampere curves, transfer mode maps, ionization potential tables.

Processes: the parameter and shielding-gas comparison tables in Volumes 2 and 3.

Metallurgy: the iron-carbon diagram, CCT diagrams, carbon equivalent formulas, WRC-1992 diagram.

Design: Blodgett's section property tables and fillet weld sizing charts.

Safety: ANSI Z49.1 clause on ventilation, the 35-foot rule, and the filter shade table.

Building the Part 4 Reference: One Book, Deeply Known

Part 4 permits only AWS D1.1/D1.1M, 24th Edition, 2020 . An electronic PDF is displayed on screen, and a hard copy may also be brought. Because Fabrication (25%), Inspection (20%) and Welding Procedure Qualification (20%) together account for 65% of Part 4, and because D1.1 is the only permitted reference, navigation speed in D1.1 is itself a scored skill.

Tab at minimum:

Prequalified base metal and filler metal tables — group classification and matching strength.

Minimum preheat and interpass temperature table — category, thickness range and process.

Prequalified joint detail figures — groove geometry, root opening and backing requirements.

Fabrication tolerance clauses — fit-up, alignment, cut-edge quality and straightening.

Visual inspection acceptance criteria table — statically versus cyclically loaded.

Welder and procedure qualification clauses — position, thickness and diameter ranges; test specimen requirements.

Ultrasonic testing clause — the decibel rating arithmetic and acceptance tables.

Edition warning. The permitted reference is specifically the 24th Edition, 2020 . Clause and table numbers moved substantially in the D1.1 restructure, so a copy from a different printing will not match the clause references the questions use. Verify the edition on the title page before you tab a single sheet.

Using the Two Open-Book Parts Correctly

Part 3 gives 180 minutes for 60 questions and Part 4 gives 150 minutes for 40. That is three minutes per question in Part 3 and 3.75 minutes in Part 4 , including reading, calculating, and any lookup. Practical consequences:

Answer from knowledge first, verify from the book second. Only look up values you genuinely cannot recall: a preheat table row, a decibel attenuation factor, an acceptance limit.

Do the calculation questions with the on-screen scientific calculator. No personal calculator is permitted.

Flag and move on. A single lookup that runs past five minutes has cost you a question elsewhere.

Practise timed. The skill being tested in an open-book exam is retrieval speed, and retrieval speed only improves under a clock.

A Realistic Sequencing Plan

Diagnose. Work sample items in all four domains before deciding where your time goes; most welding professionals are weakest in Part 1 physics and Part 2 strength of materials, not in welding content.

Close the science gap first. Parts 1 and 2 must be passed before Parts 3 and 4 can be attempted, and they are closed book, so they cannot be compensated for on exam day.

Build the reference set early. Tab and use the books throughout your study, not in the final week. Familiarity is the whole point.

Weight the back half. Once Parts 1 and 2 are secured, shift the majority of remaining study into Parts 3 and 4, which carry 70% of the composite.

Apply within one year. After passing the last of Parts 1 and 2, AWS gives candidates one year to apply for Parts 3 and 4.