Study guide
9.4 Part B Practical Exam Preparation
AWS CWI Certified Welding Inspector Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction to the AWS CWI Certification
What Is the AWS CWI Certification? CWI Exam Structure: Parts A, B, and C Eligibility Requirements and Application
2 1. Welding Processes and Fundamentals
1.1 SMAW — Shielded Metal Arc Welding (Stick) 1.2 GMAW — Gas Metal Arc Welding (MIG/MAG) 1.3 FCAW — Flux-Cored Arc Welding 1.4 GTAW — Gas Tungsten Arc Welding (TIG) 1.5 SAW — Submerged Arc Welding 1.6 Other Welding, Cutting Processes, and Process Variables
3 2. Welding Metallurgy and Heat Control
2.1 The Iron-Carbon Phase Diagram 2.2 The Heat-Affected Zone (HAZ) 2.3 Preheat and Interpass Temperature 2.4 Hydrogen-Induced Cracking (HIC) 2.5 Distortion and Residual Stress
4 3. Weld Discontinuities and Defects
3.1 Discontinuity vs. Defect — Definitions and Concepts 3.2 Cracks — Types, Causes, and Significance 3.3 Porosity and Inclusions 3.4 Incomplete Fusion and Incomplete Joint Penetration 3.5 Geometric Discontinuities: Undercut, Overlap, and Profile
5 4. Nondestructive Examination (NDE) Methods
4.1 Visual Testing (VT) 4.2 Liquid Penetrant Testing (PT) 4.3 Magnetic Particle Testing (MT) 4.4 Radiographic Testing (RT) and Ultrasonic Testing (UT)
6 5. Welding Symbols and Terminology
5.1 Anatomy of a Welding Symbol (AWS A2.4) 5.2 Joint Types, Weld Types, and Welding Positions 5.3 Essential Welding Definitions and Terminology
7 6. WPS, PQR, and Welder Qualification
6.1 Welding Procedure Specification (WPS) 6.2 Procedure Qualification Record (PQR) 6.3 Welder Performance Qualification (WPQ)
8 7. Destructive Testing Methods
7.1 Tensile Testing 7.2 Guided Bend, Nick Break, and Fillet Weld Break Tests 7.3 Impact Testing and Hardness Testing
9 8. Welding Safety and Inspector Duties
8.1 Welding Safety Hazards and Prevention 8.2 CWI Duties and Responsibilities 8.3 Welding-Related Calculations
10 9. AWS D1.1 Code Application (Part C)
9.1 AWS D1.1:2025 Code Structure and Navigation 9.2 Clause 5 — Prequalification Requirements 9.3 Clause 8 — Inspection and Acceptance Criteria 9.4 Part B Practical Exam Preparation
11 10. Exam Strategies and Comprehensive Review
10.1 Part A (Fundamentals) Exam Strategies 10.2 Part C (Code Application) Exam Strategies 10.3 Comprehensive Review — 25 Practice Questions
9.4 Part B Practical Exam Preparation
Key Takeaways Explain This Topic AI
Part B is hands-on (~46 questions) using plastic weld replicas and AWS-supplied gauges, scored against the Book of Specifications — not D1.1
You must score at least 72% on Part B and pass all three parts (A, B, C) independently
The bridge-cam (Cambridge) gauge measures undercut depth, reinforcement, fillet size, and bevel angle
Use the taper gauge for root openings and the Hi-Lo gauge for misalignment
Process every station: read stem, pick tool, measure (check both fillet legs), look up the BOS criterion, then accept/reject
- The biggest mistake is applying a memorized D1.1 value instead of the Book of Specifications criterion
- Last updated: June 2026
How Part B Connects to the Code
Part B — Practical is the hands-on module of the CWI exam. While Part C uses your full D1.1 code book, Part B is open-book against a single AWS-supplied document, the "Book of Specifications" (BOS) — a fictitious, self-contained code written so that no candidate has an edition advantage. You make accept/reject decisions by physically measuring plastic weld replicas with provided gauges, then comparing your measurement to the BOS criteria. Part B has roughly 46 questions , and like every part you must score at least 72% to pass; you must pass all three parts (A, B, C) to earn the CWI.
The skills mirror real Clause 8 inspection: measure a feature, look up the limit, decide. The difference is that the limits come from the BOS, not D1.1 — a deliberate trap for candidates who answer from memory of D1.1 values instead of reading the BOS table in front of them.
What Part B Tests
Skill area Typical task
Fillet weld size Measure leg/throat with a fillet gauge; is it undersized?
- Weld profile Identify excessive convexity, concavity, overlap
- Undercut Measure depth with the bridge-cam gauge; compare to BOS
- Reinforcement Measure groove-weld face reinforcement height
- Discontinuity ID Name porosity, crack, overlap, undercut, underfill on a replica
- High-low (mismatch) Measure pipe/plate misalignment with a Hi-Lo gauge
- Root opening / bevel Measure gap with taper gauge; bevel angle with cam gauge
- Drawing/symbols Interpret welding symbols; verify size, type, length, location
- Tools AWS Provides
You bring nothing but knowledge — AWS supplies the kit, but you must already be fluent with each tool:
- Weld replicas — molded reproductions carrying real, measurable discontinuities
- Fillet weld gauge set — Cambridge-type fillet gauges for leg size and convexity check
Bridge-cam (Cambridge) gauge — the most versatile: undercut depth, reinforcement height, fillet size, and bevel angle
- Taper (feeler/wire) gauge — root opening and gaps
- Hi-Lo gauge — internal/external misalignment of pipe or plate
- Rule / tape — lengths and spacing
- Book of Specifications — the acceptance criteria you must apply
- Using the Bridge-Cam Gauge
The bridge-cam gauge is worth dedicated practice because it does four jobs:
- Measurement Technique
- Undercut depth Seat the gauge on base metal; rotate the pointer into the groove; read depth
- Reinforcement / convexity Bridge the weld; drop the pointer to the crown; read height above base metal
- Fillet weld size Use the leg/throat measuring surfaces against the joint
- Bevel angle Use the rotating angle scale against the prepared edge
- A Worked Accept/Reject Sequence
Read the question stem — what feature, which weld, what is being asked.
Select the correct tool — wrong gauge yields a wrong number.
Measure carefully — seat the gauge squarely; re-measure marginal readings; check both legs of a fillet.
Open the Book of Specifications — find the governing criterion (do not use a remembered D1.1 number).
Compare and decide — accept if within limits, reject if it exceeds them.
Move on — manage time across stations; do not over-dwell.
Common Part B Mistakes
- Mistake Consequence
- Answering from D1.1 memory Wrong criterion — Part B uses the BOS
- Misreading the stem Measuring the wrong weld or feature
- Wrong gauge Inaccurate value, wrong call
- Poor gauge seating Marginal calls flip to wrong
- Measuring one fillet leg Misses an undersized leg
- Rushing Careless errors on easy stations
- Preparation Plan
Train with actual fillet and bridge-cam gauges on sample replicas until reading them is automatic. Practice reading welding symbols cold. Most candidates take the AWS seminar in the days before the exam, which includes supervised practice with the exact replicas and gauges — use that time deliberately.
Reading the Replicas Like Real Welds
The replicas reproduce actual surface discontinuities at true scale, so the same A3.0 vocabulary from Clause 8 applies: you must distinguish overlap (cold-lapped metal at the toe) from acceptable convexity, undercut from a natural toe transition, porosity from surface dirt, and a crack from a scratch or a tool mark. A common station shows a fillet that looks full but is undersized on one leg — which is why checking both legs and the effective throat, not just the visible crown, is essential. Another shows acceptable-looking reinforcement that actually overlaps without fusion, a rejectable profile defect.
Gauge Selection Cheat Sheet
Matching the feature to the gauge is half the battle:
- Feature to measure Correct gauge
- Fillet leg / throat size Fillet weld gauge (Cambridge set)
- Undercut depth Bridge-cam gauge pointer
- Reinforcement / convexity height Bridge-cam gauge
- Bevel/groove angle Bridge-cam gauge angle scale
- Root opening / gap Taper (feeler) gauge
- Pipe or plate misalignment (high-low) Hi-Lo gauge
- Weld length / spacing Rule or tape
- Welding Symbols Show Up Too
Several Part B questions hand you a drawing with a welding symbol and ask whether the as-welded part conforms. You must read the symbol fluently: arrow side vs. other side (below vs. above the reference line), fillet vs. groove symbol, size to the left of the symbol, length and pitch to the right , the field-weld flag , the weld-all-around circle , and the finish/contour supplementary symbols. A weld placed on the wrong side, made the wrong size, or run the wrong length is rejectable even if the bead itself is sound.
Building the Skill Before Exam Day
Practical fluency only comes from repetition with the actual gauges . Borrow or buy a fillet gauge set and a bridge-cam gauge and drill until reading each is automatic and repeatable to within the gauge's resolution. Practice a fixed station routine : read the stem, pick the gauge, seat it squarely, read twice, look up the Book of Specifications criterion, decide, record, move on. The pre-exam AWS seminar typically includes supervised hands-on time with the exact replicas and gauges — treat it as a graded rehearsal, not a lecture.
For the Exam: The single biggest Part B error is applying a D1.1 acceptance value from memory. Always derive the criterion from the Book of Specifications provided that day, then measure, then decide.