Study guide
10.3 Comprehensive Review — 25 Practice Questions
AWS CWI Certified Welding Inspector Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction to the AWS CWI Certification
What Is the AWS CWI Certification? CWI Exam Structure: Parts A, B, and C Eligibility Requirements and Application
2 1. Welding Processes and Fundamentals
1.1 SMAW — Shielded Metal Arc Welding (Stick) 1.2 GMAW — Gas Metal Arc Welding (MIG/MAG) 1.3 FCAW — Flux-Cored Arc Welding 1.4 GTAW — Gas Tungsten Arc Welding (TIG) 1.5 SAW — Submerged Arc Welding 1.6 Other Welding, Cutting Processes, and Process Variables
3 2. Welding Metallurgy and Heat Control
2.1 The Iron-Carbon Phase Diagram 2.2 The Heat-Affected Zone (HAZ) 2.3 Preheat and Interpass Temperature 2.4 Hydrogen-Induced Cracking (HIC) 2.5 Distortion and Residual Stress
4 3. Weld Discontinuities and Defects
3.1 Discontinuity vs. Defect — Definitions and Concepts 3.2 Cracks — Types, Causes, and Significance 3.3 Porosity and Inclusions 3.4 Incomplete Fusion and Incomplete Joint Penetration 3.5 Geometric Discontinuities: Undercut, Overlap, and Profile
5 4. Nondestructive Examination (NDE) Methods
4.1 Visual Testing (VT) 4.2 Liquid Penetrant Testing (PT) 4.3 Magnetic Particle Testing (MT) 4.4 Radiographic Testing (RT) and Ultrasonic Testing (UT)
6 5. Welding Symbols and Terminology
5.1 Anatomy of a Welding Symbol (AWS A2.4) 5.2 Joint Types, Weld Types, and Welding Positions 5.3 Essential Welding Definitions and Terminology
7 6. WPS, PQR, and Welder Qualification
6.1 Welding Procedure Specification (WPS) 6.2 Procedure Qualification Record (PQR) 6.3 Welder Performance Qualification (WPQ)
8 7. Destructive Testing Methods
7.1 Tensile Testing 7.2 Guided Bend, Nick Break, and Fillet Weld Break Tests 7.3 Impact Testing and Hardness Testing
9 8. Welding Safety and Inspector Duties
8.1 Welding Safety Hazards and Prevention 8.2 CWI Duties and Responsibilities 8.3 Welding-Related Calculations
10 9. AWS D1.1 Code Application (Part C)
9.1 AWS D1.1:2025 Code Structure and Navigation 9.2 Clause 5 — Prequalification Requirements 9.3 Clause 8 — Inspection and Acceptance Criteria 9.4 Part B Practical Exam Preparation
11 10. Exam Strategies and Comprehensive Review
10.1 Part A (Fundamentals) Exam Strategies 10.2 Part C (Code Application) Exam Strategies 10.3 Comprehensive Review — 25 Practice Questions
10.3 Comprehensive Review — 25 Practice Questions
Key Takeaways Explain This Topic AI
Treat this 25-question set as a timed, mixed-domain final checkpoint across all three exam parts, not as reading
All three parts pass independently at 72% — Part A (150 closed-book), Part B (46 practical), Part C (50 code) — you must pass each
Keep a three-column miss log (topic, missed rule, the clue you overlooked) and reread the chapter behind any cluster of misses
Re-derive every formula and recite the discontinuity-to-cause and NDE surface-vs-volumetric maps from a blank page
Exam-day logistics: meet the Jaeger J2 near-vision requirement, arrive early, and pace each part with flag-and-return
- Get real rest the night before — fatigue, not knowledge gaps, causes most careless misses on a long exam day
- Last updated: June 2026
How to Use This Final Checkpoint
These 25 questions sample every major CWI domain — the five processes, metallurgy and heat control, discontinuities, NDE methods, weld symbols, code acceptance criteria, safety, and on-the-job math — across all three exam parts. Treat the set as an active-recall checkpoint , not a reading assignment. Answer the full 25 first, then review explanations. For each miss, write the reason the correct option wins and why the most tempting distractor fails ; real exam items retest the same concept with new wording, so understanding the underlying rule transfers, memorized answers do not.
If you miss several questions from one domain, stop and reread that chapter before moving on.
A strong final loop is: timed attempt → explanation review → targeted reread → second attempt after a break. Keep a three-column miss log — topic, missed rule, and the clue you should have noticed (a unit, an absolute word, a loading condition). For calculation or scenario items, say the first step aloud before choosing an option; that one habit stops you rushing into a familiar-but-wrong answer.
Three-Part Pass Structure (Plan Each Independently)
The CWI credential requires passing all three parts, each at 72% — a strong Part A cannot rescue a weak Part C. Plan time and tactics per part:
- Part Mode Questions (scored) Pace Core tactic
- A — Fundamentals Closed book 150 (+15 pretest) ~48 s Memorized recall; flag-and-return
- B — Practical Open book (kit + Book of Specs) 46 ~2.6 min Measure precisely; judge to the spec
- C — Code Application Open book (D1.1/API 1104/ASME IX) 50 ~2.4 min Tab, navigate, read the code text
Eligibility and renewal reminders that show up as logistics questions: candidates qualify through combinations of education and welding experience and must meet a near-vision (Jaeger J2) requirement ; the credential is maintained on a recertification cycle with periodic eye exams. Bring approved corrective lenses if you use them.
Last-Pass Cram Tables (Re-Derive From Memory)
Before you start the 25 questions, prove you can reproduce these from a blank page — they cover the most-missed Part A clusters.
Electrode classifications (decode the digits):
- Example Meaning
- E 70 18 70 ksi min tensile; last digit 8 = low-hydrogen iron-powder coating
- E 60 10 60 ksi; cellulosic, deep penetration, high hydrogen
- ER70S-6 Solid GMAW/GTAW wire, 70 ksi, deoxidizers (Si/Mn)
- E71T-1 FCAW tubular, 70 ksi, all-position (1), gas-shielded
Theoretical fillet throat: throat = 0.707 × leg . A 5/16 in (0.3125 in) equal-leg fillet → 0.707 × 0.3125 = 0.221 in .
Five basic joint types: butt, T-joint (tee), corner, lap, edge — every connection is one of these.
D1.1 prequalified processes: SMAW, GMAW (except short-circuit on CJP), FCAW, SAW. GTAW is NOT prequalified and always needs a PQR.
Whole-Exam-Day Readiness Checklist
I can recite the five processes' power source, polarity, shielding, and position limits, and decode E7018/ER70S-6/E71T-1
- I can map each discontinuity to its cause and the NDE method that detects it (surface vs volumetric)
- I can write heat input and carbon equivalent and compute fillet throat (0.707 × leg) from memory
- I can state the three HIC conditions and one way to break each, and why preheat reduces cracking
- My code book is tabbed for the allowed edition and I can find any major table in under 30 seconds
I have practiced Part B gauge readings (fillet, Bridge-Cam, V-WAC, hi-lo) and judge to the Book of Specifications
I have a pacing plan per part and will flag-and-return rather than stall
I meet the Jaeger J2 near-vision requirement (with corrective lenses if needed) and have my admission documents ready
- I completed several full-length timed practice sets and reread my weakest domains
- I am rested — fatigue, not knowledge, causes most careless misses on a six-hour day
Work the 25 questions now under timed conditions, then close every gap they expose.
Domain Self-Diagnosis — Read Your Misses
The value of this set is not the score; it is what your misses reveal. Sort every wrong answer into one of these recurring CWI domains and act on the pattern:
If you miss... The likely gap Fix
Process questions (1, 2, 10, 12, 15, 24) Power source, polarity, shielding, position, prequalification Re-recite the five-process table from 10.1
Metallurgy/heat (4, 5, 14, 20) HAZ, HIC triangle, carbon equivalent, preheat purpose Re-derive CE; list the three HIC conditions
Discontinuity/acceptance (11, 13, 21) Causes vs limits; crack prohibition; D1.1 Table 8.1 Re-map discontinuity → cause → NDE
NDE (6, 7, 19) Surface vs volumetric, ferromagnetic limit, lighting Re-recite the NDE capability table
Symbols/joints/math (8, 9, 22, 25) Arrow side, throat 0.707×leg, five joints, heat input Re-draw symbols; redo both formulas blind
Qualification/safety (16, 17, 18, 23) Tensile basis, OFC limits, 6-month rule, top hazard Reread duties and safety sections
The two-pass rule for this set: take it once cold and timed, then — after rereading the chapters behind your weakest column — retake only your missed items the next day, shuffled in with a few new ones so you are testing the concept, not the answer order. When you can clear the same domain twice without notes, that domain is exam-ready. Repeat until every column is solid; that is what walking in prepared looks like.