Study guide

10.2 Part C (Code Application) Exam Strategies

AWS CWI Certified Welding Inspector Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction to the AWS CWI Certification

What Is the AWS CWI Certification? CWI Exam Structure: Parts A, B, and C Eligibility Requirements and Application

2 1. Welding Processes and Fundamentals

1.1 SMAW — Shielded Metal Arc Welding (Stick) 1.2 GMAW — Gas Metal Arc Welding (MIG/MAG) 1.3 FCAW — Flux-Cored Arc Welding 1.4 GTAW — Gas Tungsten Arc Welding (TIG) 1.5 SAW — Submerged Arc Welding 1.6 Other Welding, Cutting Processes, and Process Variables

3 2. Welding Metallurgy and Heat Control

2.1 The Iron-Carbon Phase Diagram 2.2 The Heat-Affected Zone (HAZ) 2.3 Preheat and Interpass Temperature 2.4 Hydrogen-Induced Cracking (HIC) 2.5 Distortion and Residual Stress

4 3. Weld Discontinuities and Defects

3.1 Discontinuity vs. Defect — Definitions and Concepts 3.2 Cracks — Types, Causes, and Significance 3.3 Porosity and Inclusions 3.4 Incomplete Fusion and Incomplete Joint Penetration 3.5 Geometric Discontinuities: Undercut, Overlap, and Profile

5 4. Nondestructive Examination (NDE) Methods

4.1 Visual Testing (VT) 4.2 Liquid Penetrant Testing (PT) 4.3 Magnetic Particle Testing (MT) 4.4 Radiographic Testing (RT) and Ultrasonic Testing (UT)

6 5. Welding Symbols and Terminology

5.1 Anatomy of a Welding Symbol (AWS A2.4) 5.2 Joint Types, Weld Types, and Welding Positions 5.3 Essential Welding Definitions and Terminology

7 6. WPS, PQR, and Welder Qualification

6.1 Welding Procedure Specification (WPS) 6.2 Procedure Qualification Record (PQR) 6.3 Welder Performance Qualification (WPQ)

8 7. Destructive Testing Methods

7.1 Tensile Testing 7.2 Guided Bend, Nick Break, and Fillet Weld Break Tests 7.3 Impact Testing and Hardness Testing

9 8. Welding Safety and Inspector Duties

8.1 Welding Safety Hazards and Prevention 8.2 CWI Duties and Responsibilities 8.3 Welding-Related Calculations

10 9. AWS D1.1 Code Application (Part C)

9.1 AWS D1.1:2025 Code Structure and Navigation 9.2 Clause 5 — Prequalification Requirements 9.3 Clause 8 — Inspection and Acceptance Criteria 9.4 Part B Practical Exam Preparation

11 10. Exam Strategies and Comprehensive Review

10.1 Part A (Fundamentals) Exam Strategies 10.2 Part C (Code Application) Exam Strategies 10.3 Comprehensive Review — 25 Practice Questions

10.2 Part C (Code Application) Exam Strategies

Key Takeaways Explain This Topic AI

Part B (Practical) and Part C (Code) are both open book and both scored at 72% — speed and navigation, not memorization, win them

Part B uses molded replica specimens plus the inspection kit (fillet, Bridge-Cam, V-WAC, hi-lo gauges) judged against the Book of Specifications and Book of Exhibits — 46 questions in 2 hours

Part C tests applying a code (AWS D1.1, API 1104, or ASME Section IX) to look-up scenarios; tab every key table and figure

On Part B, measure exactly (leg, throat, reinforcement, undercut, convexity) and accept/reject ONLY against the Book of Specifications, never memory

On Part C, identify the clause/table first, navigate by tab, read the actual code text, and trust it — do not assume

  • Practice both with a timer: find any major reference or take any gauge reading in under 30 seconds
  • Last updated: June 2026

Part B (Practical) — Gauges, Replicas, and the Book of Specs

Part B is the hands-on, open-book practical part: 46 questions in 2 hours , passed at 72% . AWS provides everything — you do not bring tools. You inspect molded plastic replica weldments (groove plate, fillet/T-joint, and a pipe specimen) using a calibrated inspection tool kit , then accept or reject each feature strictly against the Book of Specifications , with supporting documents in the Book of Exhibits . The whole part is a discipline test: measure precisely, then compare to the written spec — never to memory or field habit.

The inspection kit and what each tool reads:

  • Tool Measures
  • Fillet weld gauge Leg size and throat of fillet welds
  • Bridge-Cam gauge Reinforcement, fillet leg, undercut depth, angle of preparation
  • V-WAC (undercut) gauge Undercut depth and surface porosity sizing
  • Hi-Lo gauge Internal misalignment (high-low) on pipe
  • Dial caliper / ruler / protractor Lengths, thickness, groove angle
  • Magnifier, mirror, flashlight Surface-flaw detection (cracks, porosity, overlap, IF)

What you measure and judge per replica:

  • Feature Tool Accept/reject basis
  • Fillet leg & throat Fillet/Bridge-Cam Book of Specifications min size
  • Reinforcement Bridge-Cam Max height per spec
  • Undercut V-WAC/Bridge-Cam Depth limit per spec
  • Convexity/concavity Bridge-Cam Profile limits
  • Cracks, porosity, overlap, IF Visual + magnifier Spec acceptance limits

Part B traps: wrong gauge for the feature; reading the gauge from the wrong reference face; and — most common — judging by memory instead of the Book of Specifications . Always cite the spec line. Re-zero gauges, and report measured values to the precision the gauge allows.

Part C (Code Application) — Navigation Over Memory

Part C is open book against a chosen code — most candidates sit AWS D1.1 Structural Welding Code — Steel , but API 1104 (pipelines) and ASME Section IX are options. It is 50 scored questions plus pretest , and 72% passes. Because the code is in front of you, the exam tests how fast and accurately you can find and apply the right clause, table, or figure — not whether you memorized it.

Tab the code before exam day. A consistent color scheme turns a 90-second hunt into a 10-second flip:

  • Tab D1.1 reference Content
  • Red Table 5.3 Approved base metals (groups)
  • Blue Table 5.4 Matching filler metals
  • Green Table 5.8 Minimum preheat / interpass
  • Yellow Figure 5.1 Prequalified CJP groove joints
  • Orange Figure 5.2 Prequalified PJP groove joints
  • Purple Table 7.7 Minimum fillet weld size
  • Pink Table 8.1 Visual acceptance criteria
  • Brown Table 8.2 UT acceptance criteria
  • Black Clause 6 Welder/WPS qualification

Common Part C question types:

  • Type Approach
  • Table look-up (preheat, fillet size) Identify metal group, then cross-read thickness row
  • Acceptance criteria Table 8.1; pick statically vs cyclically loaded column
  • Prequalification check Verify ALL Clause 5 conditions — one miss = not prequalified
  • Joint detail (root opening, angle) Figures 5.1/5.2 by joint designation
  • Qualification range Clause 6 tables — position, thickness, diameter limits
  • Repair/NDE timing Clause 8

Memorize the structure , not the contents: which clause holds qualification, fabrication, and inspection. That mental map is what lets you go straight to the tab.

Open-Book Time Management and Step-by-Step Method

Both open-book parts pass at 72% and both reward a calm, repeatable routine. Time budgets:

  • Part Scored Q Time Pace Pass
  • B (Practical) 46 120 min ~2.6 min/Q 72%
  • C (Code) 50 ~120 min ~2.4 min/Q 72%

That pace is generous only if your gauges and tabs are second nature. Build the habit now: set a timer and practice taking each gauge reading and finding each major table until both take under 30 seconds .

The six-step look-up loop (apply to every Part C item):

Read the full question — pin down exactly what value or decision is asked.

Identify the clause/table/figure needed (this is the make-or-break step).

Navigate by tab — go straight to the reference.

Read the actual code text/row — do not assume from memory.

Match the answer to the code wording exactly.

Move on — trust the code; do not second-guess.

Part C mistakes to avoid:

  • Mistake Prevention
  • Answering from memory Always verify in the code, even when sure
  • Static vs cyclic mix-up Re-read the loading condition before choosing the column
  • Boundary thickness error Note "up to and including" vs "over" — equal values matter
  • Partial prequalification check A WPS is prequalified only if EVERY condition is met
  • Time sink If unfound in ~4 minutes, flag and move on
  • Part B/C Readiness Checklist (Last Cram Pass)
  • Take leg, throat, reinforcement, and undercut readings on a sample weld with the correct gauge, blind
  • Practice accepting/rejecting a feature by citing a specific Book of Specifications line
  • Confirm all code tabs are placed and labeled (5.3, 5.4, 5.8, 5.1, 5.2, 7.7, 8.1, 8.2, Clause 6)
  • Time yourself finding any major table — target under 30 seconds
  • Run the six-step look-up loop on 20 practice code questions
  • Verify which code edition the exam allows and tab THAT edition only
  • Plan to flag-and-return on any item exceeding ~4 minutes

For the exam: the single highest-payoff prep for both open-book parts is timed repetition — gauge readings for Part B, table navigation for Part C — until accuracy is automatic and speed is no longer a worry.