Study guide

2.3 RF Units and the Rule of 10s and 3s

CWNA Certified Wireless Network Administrator CWNA-109

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 Current Exam Facts 1.2 CWNA-109 Knowledge Domains and Study Strategy

2 RF Fundamentals

2.1 RF Waves, Propagation, Gain and Loss 2.2 Reflection, Multipath, VSWR and Free-Space Path Loss 2.3 RF Units and the Rule of 10s and 3s

3 RF Measurement and Antenna Systems

3.1 Noise Floor, SNR, RSSI and EIRP 3.2 Line of Sight, Fresnel Zone, Polarization and MIMO 3.3 Antenna Types, Charts, Cables and Lightning Protection

4 Industry Bodies and Legacy PHY

4.1 Industry Organizations and OSI Layers 4.2 Legacy 802.11 PHY Standards 4.3 Spread Spectrum, Modulation and MCS

5 Modern 802.11 PHY and Channel Concepts

5.1 Wi-Fi 4 HT and Wi-Fi 5 VHT 5.2 Wi-Fi 6 and Wi-Fi 6E High Efficiency 5.3 Primary Channels, OBSS, Throughput and Guard Interval

6 Spectrum Rules and WLAN Use Cases

6.1 Frequency Bands, DFS and Transmit Power Control 6.2 WLAN, Bridging, Peer-to-Peer and Mesh

7 802.11 Service Sets and Framing

7.1 Stations, BSS, ESS and the Distribution System 7.2 MSDU, MPDU, PSDU, PPDU and Aggregation 7.3 MAC Frame Format and Addressing

8 Frame Types, Discovery, and Association

8.1 Management, Control and Data Frames 8.2 Scanning, Authentication and Association

9 Channel Access, MAC Operations, and Devices

9.1 DCF, EDCA, RTS/CTS and Interframe Spaces 9.2 Roaming, Power Save and Protection Mechanisms 9.3 Access Points, Controllers and Client Devices

10 PoE, Architectures, and Proprietary Features

10.1 Power over Ethernet, PSE and Power Budgets 10.2 Centralized vs Distributed Forwarding and Network Planes 10.3 Airtime Fairness, Band Steering and RRM

11 WLAN Design and Supporting Services

11.1 Data, Voice, Video and Legacy Client Design 11.2 High-Density, Location Services and Guest Access 11.3 DHCP, DNS, Time, VLANs and AAA

12 WLAN Security

12.1 Weak and Deprecated WLAN Security 12.2 AES, WPA2-Personal and WPA2-Enterprise 12.3 WPA3, SAE and Opportunistic Wireless Encryption 12.4 PMF, Fast Roaming, WIPS and Secure Management

13 RF Validation Surveys and Tools

13.1 Post-Implementation Validation Surveys 13.2 Application and Performance Testing 13.3 Validation Tools: Survey, Protocol and Spectrum

14 Interference, Troubleshooting, and Common Faults

14.1 Co-Channel Contention vs Adjacent Channel Interference 14.2 Protocol Analyzers, Spectrum Analyzers and Monitoring 14.3 Common WLAN Faults and Hidden Nodes

2.3 RF Units and the Rule of 10s and 3s

Key Takeaways Explain This Topic AI

The watt and milliwatt are linear power (1 W = 1000 mW). dB is only a ratio, never a standalone power.

dBm is absolute power versus 1 mW, so 0 dBm = 1 mW. dBi is antenna gain versus an isotropic radiator, not a second dBm.

Rule of 10s and 3s: +10 dB ×10 power, +3 dB ×2 power, and the matching divides for −10 dB and −3 dB.

Landmarks: 10 dBm = 10 mW, 20 dBm = 100 mW, 23 dBm = 200 mW, −30 dBm = 1 µW.

EIRP, SNR, and RSSI are the next chapter. Do not treat dBi as milliwatts or add two dBm values as if they were ratios.

Last updated: September 2026

Why WLAN people speak decibels

Watts are honest SI units. They are also clumsy for Harborline's radios, which hop from 200 mW at an AP transmitter to nanowatts at a client in the far aisle. Decibels compress that span. CWNA-109 Domain 1.2 wants you fluent in watt and milliwatt , dB as a ratio, dBm as absolute power referenced to 1 mW, dBi as antenna gain versus isotropic, and the rule of 10s and 3s that converts dBm to mW without a calculator.

Independent CWNA-109 math practice by ExamFinch stays on those units here. EIRP, SNR, and RSSI wait for the next chapter so you do not mix a cable power with a received indicator.

Watt and milliwatt

The watt (W) is the SI unit of power: one joule per second.

WLAN conducted powers are usually more convenient in milliwatts (mW) :

  • 1 W = 1000 mW
  • 1 mW = 0.001 W

Tiny received powers use microwatts (µW) and nanowatts (nW) :

  • 1 mW = 1000 µW
  • 1 µW = 0.001 mW = 10^−6 W

Harborline's indoor AP might be set near 100 mW (0.1 W) conducted on a chain before antenna math. A client at the coverage edge might be receiving on the order of 0.0000001 mW . You will not add those on a linear napkin; you will add decibels .

Keep the prefixes honest. 23 on a screen is not 23 milliwatts if the unit is dBm, and 1 W is not 1 mW. Write the unit every time you copy a number onto a whiteboard.

Decibel (dB): a ratio, never a standalone power

dB compares two powers:

dB = 10 log₁₀ (P₂ / P₁)

Because it is a ratio , the AP is 20 dB is incomplete. Twenty dB relative to what ? Cable loss of 3 dB means the output is about half the input. Antenna gain of 6 dBi is a different reference (isotropic), taught below as a dBi figure, not a naked dB of power in a cable.

Useful anchors you should recite:

  • dB change Power ratio (approx.)
  • +10 dB ×10
  • +3 dB ×2
  • 0 dB ×1 (no change)
  • −3 dB ×0.5
  • −10 dB ×0.1
  • +6 dB ×4 (two doublings)
  • +9 dB ×8 (three doublings)
  • +20 dB ×100
  • −20 dB ×0.01

You add decibels; you multiply linear power. A +10 dB amplifier after a −3 dB jumper is +7 dB net, which is a bit more than a 5× linear gain, not 10 minus 3 milliwatts.

dB is also used for return loss (previous section) and for gains/losses in a link budget. Still a ratio. If a stem gives only dB and no reference, look for the missing milliwatt, watt, or isotropic comparison.

dBm: absolute power versus 1 milliwatt

dBm is decibels relative to 1 mW :

dBm = 10 log₁₀ (P / 1 mW)

Now you have an absolute power. 0 dBm is not zero power; it is 1 mW .

  • dBm Linear power
  • 30 dBm 1000 mW = 1 W
  • 27 dBm 500 mW
  • 23 dBm 200 mW
  • 20 dBm 100 mW
  • 17 dBm 50 mW
  • 14 dBm 25 mW
  • 13 dBm 20 mW
  • 10 dBm 10 mW
  • 6 dBm 4 mW
  • 3 dBm 2 mW
  • 0 dBm 1 mW
  • −10 dBm 0.1 mW
  • −20 dBm 0.01 mW = 10 µW
  • −30 dBm 0.001 mW = 1 µW
  • −40 dBm 0.0001 mW = 0.1 µW

Adding dB (a ratio) to dBm (an absolute) yields dBm . Example: 20 dBm into a −3 dB jumper → 17 dBm at the antenna feed.

You cannot add dBm to dBm and call it dBm of a combined power without converting to milliwatts first. Two 20 dBm transmitters are not 40 dBm. Exam trap.

Negative dBm is still real power, just below 1 mW. −30 dBm is not a sign error; it is 1 µW.

dBi: antenna gain versus isotropic

An isotropic radiator is a theoretical point source that spreads energy equally in every direction. No physical WLAN antenna is isotropic; the idea is a reference .

dBi is antenna gain in decibels relative to isotropic . A 5 dBi indoor antenna means that, in its favored directions, the field is 5 dB stronger than the same watts would produce from an isotropic source, and weaker in other directions. That is passive gain : no extra watts created. You already distinguished that from amplification; here you lock the unit name.

Do not confuse:

  • Unit Meaning
  • dB Ratio between two powers (or a gain/loss term)
  • dBm Absolute power vs 1 mW
  • dBi Antenna gain vs isotropic

dBd Antenna gain vs a dipole (about 2.14 dB different from dBi). Know it exists; WLAN datasheets usually print dBi.

You cannot convert dBi to milliwatts by itself. Gain has no milliwatts until you know the conducted power going into the antenna. This chapter does not compute EIRP (conducted dBm + antenna dBi − cable dB). Remember the ingredients exist; apply them next chapter.

Rule of 10s and 3s

The rule of 10s and 3s converts between dBm and mW using only doubling and decade jumps.

Start from the identity:

0 dBm = 1 mW

Then:

  • +10 dB → multiply mW by 10
  • −10 dB → divide mW by 10
  • +3 dB → multiply mW by 2
  • −3 dB → divide mW by 2

You can chain them. 6 dB is two 3 dB steps (×4). 9 dB is three doublings (×8). 7 dB is not a pure 3-and-10 combo; estimate or use a calculator. Exam items prefer the neat marks: 0, 3, 10, 13, 17, 20, 23, 27, 30 and the negative mirrors.

To go mW → dBm , reverse the arrows: find a nearby landmark (1, 10, 100, 1000 mW) and count 10s and 3s. 50 mW is half of 100 mW → 20 dBm − 3 dB = 17 dBm . 25 mW is half of 50 mW → 14 dBm . 4 mW is 1 mW ×2 ×2 → 6 dBm .

  • Worked conversions the exam expects
  • 0 dBm = 1 mW

By definition. This is the home square on the board.

10 dBm = 10 mW

0 dBm = 1 mW, +10 dB → ×10 → 10 mW.

20 dBm = 100 mW

0 dBm = 1 mW, +10 → 10 mW, +10 → 100 mW.

Or 10 dBm = 10 mW, +10 → 100 mW.

23 dBm = 200 mW

20 dBm = 100 mW, +3 dB → ×2 → 200 mW .

Harborline's radio at 23 dBm conducted is 0.2 W, not 23 mW. Confusing the unit suffix is a classic miss.

  • −30 dBm = 1 µW
  • 0 dBm = 1 mW
  • −10 dB → 0.1 mW
  • −10 dB → 0.01 mW

−10 dB → 0.001 mW = 1 µW .

Additional drills Amira uses on a whiteboard:

  • 13 dBm : 10 dBm = 10 mW, +3 → 20 mW
  • 17 dBm : 20 dBm = 100 mW, −3 → 50 mW
  • 27 dBm : 30 dBm = 1000 mW, −3 → 500 mW
  • −20 dBm : 0 dBm = 1 mW, −10 twice → 0.01 mW = 10 µW
  • −10 dBm : one decade down from 1 mW → 0.1 mW = 100 µW
  • 6 dBm : 0 dBm = 1 mW, +3 twice → 4 mW
  • 30 dBm : three +10 steps from 1 mW → 1000 mW = 1 W

If a stem gives 23 dBm and four linear choices, walk 20 dBm = 100 mW then double. Do not average 20 and 30.

Table of common WLAN power levels

These are typical orders of magnitude for study, not a regulatory table and not EIRP. Conducted chain settings vary by vendor, band, and country.

Role / landmark dBm mW Notes for Harborline

1 W reference 30 1000 Upper landmark; many indoor chains are far below this conducted.

  • Hot outdoor-ish chain 23 200 20 dBm + 3 dB
  • Common 100 mW setting 20 100 Easy 10s landmark
  • Half of 100 mW 17 50 One 3 dB step down
  • Quarter of 100 mW 14 25 Two 3 dB steps down from 20 dBm
  • Modest indoor chain 13–15 ~20–32 13 dBm is 20 mW
  • 10 mW 10 10 One decade above 1 mW
  • 4 mW 6 4 Two doublings above 1 mW
  • 1 mW reference 0 1 Definition of 0 dBm
  • 100 µW −10 0.1 Linear received-side territory
  • 1 µW −30 0.001 Three decades below 1 mW

Client received levels in a working BSS are often tens of dB below 0 dBm; that is RSSI/SNR territory next chapter. Do not call −70 dBm a transmit setting, and do not convert it in this section as if it were EIRP.

Harborline scenario: the 23 dBm ticket

A technician sets an AP to 23 dBm and emails Amira that the radio is now 23 milliwatts, so it is quieter than the old 100 mW AP. That technician mixed dBm with mW . 23 dBm is 200 mW , twice 20 dBm's 100 mW. The change was louder, not quieter. Amira walks the rule of 10s and 3s on a whiteboard: 0 dBm = 1 mW, two +10 steps to 100 mW, then +3 to 200 mW. The ticket is corrected before the neighbor tenant files an interference complaint.

A second mistake on the same ticket: adding the AP's 5 dBi antenna as if it were +5 dBm already labeled as a milliwatt result. Antenna gain is dBi , a different reference. Stop at conducted dBm until the next chapter.

A third mistake: adding two 20 dBm chains on paper to get 40 dBm. Convert to milliwatts if you must combine linear power; 100 mW + 100 mW is 200 mW, which is 23 dBm , not 40 dBm.

Unit traps

Reading 23 dBm as 23 mW (it is 200 mW).

Treating dB as an absolute power.

Adding two dBm values as if they were dB ratios.

Using dBi and dBm interchangeably, or converting dBi to mW alone.

Forgetting 0 dBm = 1 mW, so negative dBm is still real power, just below 1 mW.

Bringing EIRP, SNR, or RSSI into a units-only question.

Loading diagram... Rule of 10s and 3s from 0 dBm = 1 mW

Linear milliwatts at common dBm landmarks