Study guide

7.1 Personal Protective Equipment (PPE) Selection, Donning & Doffing

DANB National Entry Level Dental Assistant NELDA

Track your progress as you read

Finished sections get a check mark.

1 Exam Overview & Study Strategy

NELDA Exam Structure, Eligibility & Blueprint

2 Chapter 1: Head and Neck Anatomy & Craniofacial Architecture

1.1 Bones of the Skull, Cranial Landmarks & Mandibular Anatomy 1.2 Muscles of Mastication & Facial Expression 1.3 Cranial Nerves, Vascular Supply & Major Salivary Glands

3 Chapter 2: Oral Cavity Landmarks & Soft Tissues

2.1 Oral Mucosa, Gingival Architecture & Periodontal Apparatus 2.2 Tongue Anatomy, Lingual Papillae & Floor of the Mouth 2.3 Hard and Soft Palate, Uvula, Fauces & Pharyngeal Structures

4 Chapter 3: Tooth Histology, Development & Root Morphology

3.1 Dental Hard & Soft Tissues: Enamel, Dentin, Cementum & Pulp 3.2 Odontogenesis, Life Cycle of the Tooth & Eruption Timelines 3.3 Crown and Root Anatomy, Line Angles, Point Angles & Landmarks

5 Chapter 4: Tooth Numbering & Dentition Identification

4.1 Universal Numbering System: Permanent and Primary Dentitions 4.2 International (FDI/ISO) & Palmer Notation Systems 4.3 Tooth Identification & Morphological Traits

6 Chapter 5: Occlusion & Common Oral Pathologies

5.1 Dental Occlusion & Angle's Classifications of Malocclusion 5.2 Dental Caries, Pulpal Pathology & Periodontal Disease 5.3 Common Oral Lesions, Developmental Anomalies & Pathologies

7 Chapter 6: Microbiology & Modes of Disease Transmission

6.1 Dental Microbiology, Microorganisms & Chain of Infection 6.2 Bloodborne Pathogens & High-Consequence Infectious Diseases 6.3 Standard Precautions, Transmission Precautions & Hand Hygiene

8 Chapter 7: Personal Protective Equipment, Surface Asepsis & Waterlines

7.1 Personal Protective Equipment (PPE) Selection, Donning & Doffing 7.2 Clinical Contact Surface Management, Barriers & Disinfectants 7.3 Dental Unit Waterline (DUWL) Maintenance, Testing & Evacuation Asepsis

9 Chapter 8: Instrument Processing, Sterilization & Monitoring Protocols

8.1 Instrument Processing Workflow, Cleaning & Ultrasonic Decontamination 8.2 Packaging, Autoclave Types & Steam/Chemical Sterilization 8.3 Sterilization Monitoring, Spore Testing & Failure Response

10 Chapter 9: Occupational Safety, OSHA Regulatory Compliance & Waste

9.1 OSHA Bloodborne Pathogens Standard & Post-Exposure Incident Protocol 9.2 Hazard Communication (HazCom), Safety Data Sheets (SDS) & Chemical Safety 9.3 Regulated Medical Waste, Sharps & Amalgam Hygiene

11 Chapter 10: Radiation Physics, Biological Effects & Exposure Factors

10.1 Radiation Physics & Dental X-Ray Tubehead Operation 10.2 Exposure Factors (kVp, mA, Exposure Time) & Beam Characteristics 10.3 Biological Effects, ALARA & Radiation Protection

12 Chapter 11: Radiographic Techniques (Paralleling, Bisecting, Panoramic)

11.1 Intraoral Radiography: Paralleling Technique & Bitewing Projections 11.2 Bisecting Technique, Occlusal Imaging & Special Patient Adaptations 11.3 Panoramic Radiography, Patient Positioning Errors & Extraoral Imaging

13 Chapter 12: Digital Image Acquisition, Interpretation & Quality Assurance

12.1 Digital Receptors, Image Acquisition & Sensor Infection Control 12.2 Radiographic Interpretation, Anatomy & Diagnostic Acceptability 12.3 Digital Quality Assurance, Retake Analysis & Image Records

7.1 Personal Protective Equipment (PPE) Selection, Donning & Doffing

Key Takeaways Explain This Topic AI

The OSHA Bloodborne Pathogens Standard mandates that employers provide, maintain, clean, repair, and replace all required PPE at no financial cost to the employee, and clinical attire must never be laundered at home.

The standard CDC donning sequence is: (1) Protective Gown/Clothing, (2) Surgical Mask or N95 Respirator, (3) Protective Eyewear or Face Shield, and (4) Examination Gloves pulled over the cuffs.

The standard CDC doffing sequence is: (1) Gloves, (2) Protective Eyewear/Face Shield, (3) Gown/Lab Coat, and (4) Mask or Respirator, followed immediately by thorough Hand Hygiene.

ASTM Level 3 surgical masks provide maximum fluid barrier resistance (160 mm Hg) and ≥98% bacterial/particulate filtration efficiency (BFE/PFE), making them the standard choice for aerosol-generating procedures.

Puncture-resistant heavy-duty utility gloves are strictly mandatory for instrument processing, operatory disinfection, and handling hazardous chemicals; patient examination gloves must never be washed, disinfected, or reused.

Last updated: August 2026

Personal Protective Equipment (PPE) Selection, Donning & Doffing

Quick Answer: Personal Protective Equipment (PPE) is specialized clothing or equipment worn by dental healthcare personnel to protect against contact with infectious blood, saliva, contaminated airborne aerosols, and hazardous chemicals. Under the OSHA Bloodborne Pathogens Standard (29 CFR 1910.1030) , employers must provide, maintain, and launder all PPE at no cost to employees. The standard CDC donning sequence is: Gown → Mask/Respirator → Eyewear/Face Shield → Gloves . The standard doffing sequence is: Gloves → Eyewear/Face Shield → Gown → Mask/Respirator → Immediate Hand Hygiene . Single-use examination gloves must never be washed or disinfected, and heavy-duty utility gloves are mandatory for operatory disinfection and instrument processing.

In oral healthcare, personal protective equipment acts as a primary physical barrier interrupting the Chain of Infection between the patient's oral cavity and the clinician. Because dental procedures routinely generate high-velocity spatter, microbial aerosols, and sharp instrument hazards, dental assistants must master the exact criteria for PPE selection, maintenance, donning, and doffing.

1. Regulatory Framework: OSHA Mandates & Employer Responsibilities

The Occupational Safety and Health Administration (OSHA) enforces legal standards to protect healthcare workers from workplace hazards, while the Centers for Disease Control and Prevention (CDC) issues evidence-based infection prevention guidelines. OSHA PPE REGULATORY MANDATES

  • +-------------------------------------------------------------------------+
  • | 1. EMPLOYER PROVISION | Must provide appropriate PPE in correct sizes |
  • | | at NO financial cost to the employee. |
  • | 2. OFFICE LAUNDERING | Protective clothing MUST be laundered in-office|
  • | | or by a commercial service; NEVER taken home. |
  • | 3. REMOVAL MANDATE | All PPE must be removed prior to exiting the |
  • | | clinical treatment area or entering staff areas|
  • | 4. MAINTENANCE/REPLACE | Employer must clean, repair, or replace torn |
  • | | or compromised PPE at no expense to worker. |
  • +-------------------------------------------------------------------------+
  • Hierarchy of Hazard Controls

Under OSHA's industrial hygiene hierarchy, PPE is the final line of defense against occupational hazards:

Elimination / Substitution: Physically remove or replace the hazard (rarely possible in clinical dentistry).

Engineering Controls: Isolate people from the hazard (e.g., sharps disposal containers, rubber dams, High-Volume Evacuation [HVE], safety scalpels, self-sheathing anesthetic needles).

Work Practice Controls: Alter the manner in which a task is performed to reduce exposure risk (e.g., one-handed scoop technique for needle recapping, prohibiting two-handed needle recapping, instrument cassettes).

Personal Protective Equipment (PPE): Protect the worker with personal gear (gowns, masks, eye protection, gloves).

2. Protective Clothing & Clinical Gowns

Protective clothing shields intact skin, non-intact skin, and street clothing from contact with blood, saliva, and infectious fluids.

Clinical Specifications

Coverage: Must feature a high neck (mandarin collar) , long sleeves with ribbed knitted cuffs that tuck securely under exam gloves, and full coverage of the torso and lap down to the knees when seated chairside.

Material: Made from fluid-resistant synthetic fabric or heavy reusable cotton-polyester blends designed to prevent strike-through of liquids.

Fasteners: Fastened at the neck and waist with snaps, buttons, or ties to prevent gaping. PROTECTIVE GOWN SPECIFICATIONS

  • [ High Mandarin Collar ] <-- Protects Neck / Clavicle
  • / \
  • [ Long Sleeves ] [ Long Sleeves ]
  • | |
  • [ Knit Cuffs ] [ Knit Cuffs ] <-- Tucked UNDER Gloves
  • \ /
  • [ Knee-Length Lap ] <-- Covers Lap When Seated
  • Handling and Changing Guidelines

Visibly Soiled Attire: Must be changed immediately if penetrated or visibly contaminated with blood or other potentially infectious materials (OPIM).

Daily Replacement: Must be changed daily or between patient sessions if compromised.

Operatory Zone Restrictions: Protective gowns and lab coats must never be worn outside the clinical operatory area (e.g., forbidden in staff breakrooms, restrooms, administrative reception desks, or outside the dental facility).

Laundering Ban: Under 29 CFR 1910.1030, taking clinical attire home to wash is a severe OSHA violation due to the risk of contaminating personal family laundry.

3. Respiratory Protection: Surgical Masks vs. Particulate Respirators

Dental procedures utilizing high-speed handpieces, ultrasonic scalers, and air-water syringes generate airborne spatter (>50 µm) and aerosols (<50 µm). Proper respiratory selection prevents inhalation and mucosal exposure.

ASTM International Mask Performance Standards

Surgical masks are classified into three performance levels according to ASTM F2100 standards:

ASTM Level Fluid Resistance (Blood Penetration) Bacterial Filtration Efficiency (BFE @ 3.0 µm) Particulate Filtration Efficiency (PFE @ 0.1 µm) Clinical Dental Indication

ASTM Level 1 80 mm Hg (Low) ≥ 95% ≥ 95% Basic examinations, visual charting, operatory cleanup without aerosol generation, taking radiographs.

ASTM Level 2 120 mm Hg (Moderate) ≥ 98% ≥ 98% Limited aerosol or spatter procedures (prophylaxis, composite restorations with low water spray).

ASTM Level 3 160 mm Hg (Maximum) ≥ 98% ≥ 98% High-aerosol procedures : ultrasonic scaling, crown preparations with high-speed turbines, surgical extractions.

Surgical Masks vs. NIOSH-Approved N95 Respirators SURGICAL MASK vs. NIOSH-APPROVED N95 RESPIRATOR

  • SURGICAL DENTAL MASK NIOSH N95 RESPIRATOR
  • +----------------------------+ +----------------------------+
  • | • Loose-fitting perimeter | | • Tight, airtight face seal|
  • | • Fluid-resistant outer | | • Filters ≥ 95% particles |
  • | • Side leakage occurs | | down to 0.3 micrometers |
  • | • Protects from SPATTER | | • Protects from AEROSOLS |
  • | • No annual fit test needed| | • Mandatory annual fit test|
  • +----------------------------+ +----------------------------+

Surgical Mask Mechanics: Protects mucous membranes of nose and mouth from large droplet spatter and projectile fluids. However, because it fits loosely around the cheeks and chin, ambient air bypasses the filter matrix during inhalation ( perimeter leakage ).

N95 Filtering Facepiece Respirator: Forms a tight, airtight seal against the clinician's facial skin. Filters at least 95% of airborne particulate matter down to 0.3 micrometers . Required for treating patients with suspected airborne diseases (e.g., active tuberculosis in emergency settings) or during intense aerosol procedures where full respiratory containment is indicated.

OSHA Respiratory Protection Standard (29 CFR 1910.134): Requires an initial medical evaluation, annual professional fit-testing , training, and a mandatory user seal check (positive/negative pressure test) every time an N95 respirator is donned.

Mask Handling Rules

Change Between Patients: A new mask must be donned for every patient.

Change When Moist: Moisture from exhaled breath compromises the electrostatic charge of the filter medium, creating a "wicking effect" that draws microbes through the fabric. If a mask becomes moist or wet (typically within 20–30 minutes in heavy aerosol environments), it must be replaced immediately.

Never Touch the Mask Body: Touch only the ear loops or ties during adjustment and removal.

Prohibition of Neck/Chin Resting: Never pull a mask down to rest beneath the chin or around the neck between procedures. This contaminates the inner lining with skin flora and operatory spatter.

4. Eye & Face Protection (ANSI Z87.1 Standards)

Dental procedures present severe ocular hazards, including high-speed projectile tooth fragments, hardened calculus chips, chemical splashes (acid etch, sodium hypochlorite), and microbial spatter containing Hepatitis B, HIV, or Herpes simplex. CLINICAL EYEWEAR REQUIREMENTS

  • +-------------------------------------------------------------------------+
  • | • ANSI Z87.1 CERTIFIED | Must meet impact resistance standards. |
  • | • SOLID SIDE SHIELDS | Top and side protection is mandatory. |
  • | • REGULAR EYEGLASSES | NOT compliant unless fitted with ANSI-rated |
  • | | side shields or covered by a face shield. |
  • | • FACE SHIELDS | Must extend from forehead to below chin and |
  • | | wrap around ears; ALWAYS worn with a mask. |
  • | • PATIENT EYEWEAR | Mandatory for all patients during all care. |
  • +-------------------------------------------------------------------------+
  • Clinician Eye Protection

Must comply with the American National Standards Institute ( ANSI Z87.1 ) standard for occupational eye and face protection.

Eyewear must feature solid side shields (not perforated or mesh) and top brow protection to block peripheral spatter.

Prescription Glasses: Everyday corrective glasses lack impact-rated lenses and side shielding. Clinicians must wear ANSI-certified prescription safety glasses, clip-on side shields, or a full-face shield over their glasses.

Face Shields: Full-face shields provide expansive facial coverage from forehead to below the chin. A face shield does not replace a mask ; it must always be worn in combination with a surgical mask or respirator.

Patient Eye Protection

Patients must be provided with tinted or clear protective eyewear during all clinical procedures.

Protects patient eyes from dropped sharp instruments, bur slippage, spattering saliva/blood, high-intensity curing lights, and caustic chemicals (e.g., 37% phosphoric acid etching gel).

5. Glove Selection, Types & Dermatological Considerations

Gloves are the final PPE item donned before touching intraoral tissues or contaminated surfaces. DENTAL GLOVE CLASSIFICATION MATRIX

  • +-------------------------------------------------------------------------+
  • | PATIENT EXAMINATION GLOVES | Non-sterile nitrile, latex, vinyl, or |
  • | | chloroprene for routine dental procedures. |
  • +-------------------------------------------------------------------------+
  • | STERILE SURGICAL GLOVES | Individually wrapped, precise numeric |
  • | | sizing (6.0-8.5) for invasive surgery. |
  • +-------------------------------------------------------------------------+
  • | HEAVY-DUTY UTILITY GLOVES | Puncture/chemical-resistant nitrile. Must |
  • | | be worn for cleaning, processing & spills. |
  • +-------------------------------------------------------------------------+
  • | PLASTIC OVERGLOVES | Thin "food-handler" gloves placed over |
  • | | contaminated exam gloves to touch charts. |
  • +-------------------------------------------------------------------------+
  • Detailed Analysis of Glove Categories

Patient Examination Gloves: Non-sterile, ambidextrous gloves used for routine non-surgical dental procedures (restorative, hygiene, diagnostic). Nitrile is the modern clinical standard due to high puncture resistance and allergen-free composition.

Sterile Surgical Gloves: Individually packaged in sterile pairs with left/right hand-specific contours and precise half-size increments. Mandated for invasive surgical procedures involving bone incision, flap reflection, or implant placement.

Heavy-Duty Utility Gloves: Thick, puncture-resistant, and chemical-resistant nitrile or neoprene gloves. Mandatory during:

  • Cleaning and scrubbing contaminated dental instruments
  • Loading and unloading ultrasonic cleaners and instrument washers
  • Spraying and wiping operatory surfaces with chemical disinfectants
  • Handling hazardous chemical solutions and disinfectant concentrates

Utility gloves may be washed, disinfected, and autoclaved according to manufacturer directions. They must be discarded immediately if they show signs of cracking, peeling, tearing, or puncture.

Overgloves ("Mittens" / Plastic Food-Handler Gloves): Worn over contaminated patient exam gloves to quickly retrieve an extra bur, open a supply drawer, or make a charting entry, preventing cross-contamination of clean office surfaces.

Glove Integrity & Clinical Precautions

Single-Use Rule: Examination gloves are single-use disposable medical devices. They must be discarded after every patient or if torn during treatment. They must never be washed, disinfected, or reused because soaps and alcohol disinfectants cause microscopic pore formation ("wicking").

Petroleum-Based Lotions: Petroleum-containing lotions can weaken latex gloves. Personnel should use only lotions that the glove manufacturer identifies as compatible with the specific latex or nonlatex product.

Types of Glove Reactions

Reaction Type Pathophysiology & Etiology Clinical Symptoms Time of Onset

Irritant Contact Dermatitis Non-allergic physical reaction caused by frequent handwashing, harsh soaps, poor drying, or sweat under gloves. Dry, red, itchy, cracked, or chafed skin localized to hands. Gradual onset over days to weeks.

Type IV Chemical Hypersensitivity Delayed, cell-mediated (T-cell) allergic reaction triggered by chemical accelerators (thiurams, carbamates) added during glove manufacturing. Erythema, pruritus, blistering, oozing vesicles on dorsum of hands and wrists. 24 to 48 hours post-exposure.

Type I Natural Rubber Latex Allergy Immediate, IgE-mediated systemic allergic reaction triggered by natural plant proteins found in Hevea brasiliensis rubber tree sap. Urticaria (hives), localized edema, rhinitis, conjunctivitis, bronchospasm, and potential life-threatening anaphylaxis . Minutes to 1 hour post-exposure.

6. Standard Donning & Doffing Sequences

Strict adherence to the CDC sequential protocols prevents cross-contaminating clean skin and street attire. DONNING SEQUENCE (Clean to Dirty)

[ STEP 1: PROTECTIVE GOWN ]

  • Fasten securely at neck and waist; ensure torso and lap are covered.
  • |
  • v
  • [ STEP 2: MASK OR RESPIRATOR ]
  • Secure ties or elastic loops; mold flexible metal nosepiece over bridge.
  • |
  • v
  • [ STEP 3: EYEWEAR OR FACE SHIELD ]
  • Position safety glasses with side shields or face shield over eyes/face.
  • |
  • v
  • [ STEP 4: GLOVES ]
  • Perform hand hygiene before gloving; pull glove cuffs OVER gown sleeves. DOFFING SEQUENCE (Dirty to Clean)

[ STEP 1: GLOVES ] <-- Most heavily contaminated item removed first

  • Grasp outside of opposite glove cuff; peel off inside-out.
  • Slide un-gloved finger under remaining cuff; peel off inside-out.
  • |
  • v
  • [ STEP 2: EYE PROTECTION / FACE SHIELD ]
  • Handle by clean ear pieces or headband; place in disinfection bin.
  • |
  • v
  • [ STEP 3: PROTECTIVE GOWN ]
  • Unfasten ties; peel away from neck and shoulders, folding inside-out.
  • |
  • v
  • [ STEP 4: MASK OR RESPIRATOR ]
  • Grasp bottom ties/loops, then top ties; discard without touching front.
  • |
  • v
  • [ STEP 5: HAND HYGIENE ]
  • Wash immediately with soap and water or apply alcohol hand rub (ABHR).

Note

CDC Alternative Combined Doffing Technique: The CDC also permits removing the gloves and gown together as a single unit by peeling the gown forward off the shoulders and rolling it down the arms, turning the gloves inside out as the sleeves are pulled off, followed by eyewear removal, mask removal, and immediate hand hygiene.

7. Clinical Practice Traps & DANB Exam Pearls

Caution

DANB Exam Trap #1: Laundering Clinical Attire at Home An exam question may ask what a dental assistant should do if their protective lab coat becomes lightly stained with saliva. Never select "take it home to wash on a sanitize cycle"! OSHA explicitly prohibits employees from laundering protective attire at home. It must be laundered on-site or sent to a contracted commercial healthcare laundry service.

Warning

DANB Exam Trap #2: Glove Cuffs vs. Gown Sleeves When donning PPE, the cuffs of the examination gloves must always be pulled over (on top of) the knitted cuffs of the protective gown sleeves. Leaving bare skin exposed between the sleeve and the glove cuff is a major contamination failure.

Note

DANB Exam Trap #3: Prescription Glasses as PPE Standard everyday prescription eyewear does NOT satisfy OSHA or CDC eye protection requirements unless fitted with certified, rigid top and side shields and manufactured to ANSI Z87.1 impact resistance standards.

Loading diagram... Standard CDC Donning & Doffing Protocol Hierarchy