Study guide
Artifacts Movement Sensor Issues
DANB RHS Study Guide 2026 Exam
Track your progress as you read
Finished sections get a check mark.
1 About the DANB RHS Exam
About the DANB RHS Exam Digital-Only Scope & CAT Scoring CDA/NELDA Pathway Context
2 Image Types & Diagnostic Purpose
Why Dental Images Matter Periapical & Bitewing Purposes FMX Occlusal Panoramic Ceph CBCT Diagnostically Acceptable Features
3 Anatomical Landmarks & Conditions on Images
Apical Pathology & Caries on Images Anomalies Implants Edentulous Periodontal Sinus TMJ Findings Localization of Impacted Objects
4 Procedures & Techniques to Acquire Images
4.1 History, Contraindications, and Prep 4.2 Receptor Holders, PID, and Tubehead 4.3 Paralleling Technique 4.4 Bisecting-Angle Technique 4.5 Panoramic Acquisition Basics
5 Technique Modifications & Error Correction
Anatomical Variations Mods (Tori, Cleft, Shallow Palate, Narrow Arch) Exposure Density Contrast Errors (mA/kVp/Time) Angulation Overlap Distortion Artifacts Movement Sensor Issues
6 Mounting, Viewing & Legal Requirements
Viewing Mounting Landmarks Radiopaque vs Radiolucent Orientation HIPAA Retention Ownership Charting
7 Radiation Physics Basics
7.1 kVp, mA, Time, Dose & Production 7.2 Wavelength, Frequency & Velocity 7.3 Primary vs Scatter Radiation
8 Radiation Biology & Measurement Units
8.1 Cell Tissue Sensitivity 8.2 Latent Recovery Genetic Somatic 8.3 Gy Sv R rem C/kg Units
9 Radiation Protection for Patient & Operator
9.1 MPD Cumulative Effective Dose 9.2 Barrier Position Distance ALARA 9.3 Filtration Collimation PID Shielding 9.4 Malfunction Protocol Patient Consent
10 Infection Prevention & Control for Radiography
Room Barriers Contact Surfaces Critical Semi-Critical Noncritical Items Hand Hygiene PPE Cross-Contamination
Artifacts Movement Sensor Issues
Key Takeaways Explain This Topic AI
Motion blur from patient or tubehead movement produces fuzzy or doubled outlines and is fixed by stabilization, not kVp changes.
Remove earrings, glasses, and other external radiopaque objects before exposure to prevent avoidable artifacts.
PSP artifacts include scratches, bends, barrier leaks, reverse orientation, and incomplete erase—handle plates gently and erase fully.
CCD/CMOS issues include cable faults, software not armed, and noise from underexposure; verify sensor readiness before firing.
Use a decision tree: sharpness vs foreign shapes vs density vs angulation—so you correct the true cause before retaking.
Last updated: July 2026
Artifacts Movement Sensor Issues
Quick Answer: Blur means patient or tubehead movement; sensor artifacts include scratches, plate bending, debris, reverse exposure patterns, and cable/electronic noise. Prevent with stable positioning, gentle PSP handling, clean receptors, and a clear expose-once workflow—retake only after removing the cause.
Outline I.D.7 also covers non-angulation, non-exposure failures: things that land on the image but are not anatomy, or anatomy that smears because something moved. Digital receptors introduced new artifact families, and RHS expects you to recognize them.
Motion blur
Appearance: Fuzzy enamel outlines, doubled root edges, loss of trabecular sharpness. Entire image or a region may smear.
Causes:
- Patient movement (talking, swallowing, flinching, pediatric noncompliance)
- Tubehead drift after positioning (arm not tightened; operator bumps the head)
- Exposure time long enough that minor motion registers
Panoramic: patient steps, chin shift, or tongue not to palate (pan-specific ghosts differ, but motion still blurs)
Prevention and correction:
Explain the need to hold still in one short sentence; use a fixed stare point.
Stabilize with headrest, cotton rolls, and properly seated holders.
Tighten the tube arm; avoid leaning on the tubehead.
If motion is likely, prefer technique-chart options that achieve needed mAs with shorter time / higher mA when the unit allows.
Retake after coaching—identical settings with the same wiggling patient waste dose.
Motion is not fixed by raising kVp. Sharpness is a geometric and stability problem.
Soft-tissue and foreign-object artifacts
Radiopaque streaks or shapes may be:
- Earrings, glasses, piercings, hairpins, hearing aids (especially panoramic)
- Removable appliances left in
- Lead apron misplaced high on the collar in some extraoral setups
- Thyroid collar edges intruding on anterior periapicals when poorly positioned
Fix: Remove external radiopaque objects before exposure; verify appliance status with the patient; reposition shielding so it protects without covering the ROI. These are avoidable artifacts , not pathology.
PSP plate artifacts
Photostimulable phosphor plates are flexible and easy to damage:
Artifact look Likely cause Correction
White scratches / tree lines Abrasion, bending, debris on plate Replace damaged plate; handle by edges; clean per manufacturer
Smudge or fingerprint radiolucency/opacity Contaminants on plate or barrier New barrier; glove discipline; clean plate
Bent-corner distortion Forced into holder or bitten hard Use correct holder; do not crease
Weak image with pattern / odd marking Exposed through back / wrong orientation Orient active side to beam; check manufacturer marks
Phantom image / lag Incomplete erase or double use Full erase cycle; track exposed vs erased plates
Bright spots from light leak Barrier tear; light exposure before scan Intact barrier; prompt scanning; protect from light
Always keep PSP plates in infection-control barriers . A torn barrier risks both contamination and light fogging.
Rigid sensor (CCD/CMOS) issues
Solid-state sensors create different failure modes:
Cable strain artifacts or disconnects — intermittent blank images or noise; inspect cable and connectors.
Dead pixels / sensor scratches on the housing that impress patterns — remove from service if diagnostic quality fails.
Underexposure noise — grain that operators mislabel as “sensor artifact”; still an exposure issue.
Bite marks on sensor corners — patient discomfort leading to motion; use appropriate holders and edge protection per office protocol.
Incorrect template or orientation in software — image appears flipped or assigned to the wrong tooth slot; correct mounting/templates rather than re-exposing if the capture itself is diagnostic.
Blank or nearly blank captures also occur when the sensor was not selected in the software, the wrong port was active, or the exposure fired before the sensor armed. That is a workflow artifact : verify the blue/ready indicator (or equivalent) before asking for the exposure button.
Double exposure and mix-ups
Double exposure: Two anatomies superimposed, usually darker overall. Cause: same PSP/sensor used twice without scanning/erasing or without advancing the software slot. Fix: strict one-exposure-one-receptor discipline; label and separate exposed plates.
Wrong patient / wrong mount slot: Not a beam artifact, but a legal and diagnostic error. Confirm patient identifiers on the capture template before the first exposure.
Panoramic-specific reminders (brief)
Although this chapter focuses on intraoral error correction, RHS still expects recognition that panoramic artifacts (ghost images of earrings, lead apron shadows, spinal column opacity from slumped posture) are corrected by preparation and positioning , not by random kVp jumps. If the stem is clearly panoramic, remove metal and correct posture first.
Infection control intersection
Artifacts sometimes appear after rushed barrier removal: glove powder, disinfectant pooled on a sensor face, or a damp PSP fed into a scanner. Follow manufacturer cleaning rules. Fluid intrusion can permanently damage electronic sensors—another reason barriers matter beyond OSHA rules.
Decision tree for “what is wrong with this image?”
Is anatomy sharp? If no → motion or severe geometric unsharpness.
Are there shapes that are not anatomy? → foreign object, plate damage, double exposure, cone-cut edge .
Is density wrong without shapes? → return to mAs/kVp chapter logic.
Are contacts overlapped or teeth short/long? → angulation , not sensor brand.
Fix the root cause, then decide on retake necessity with ALARA in mind.
Patient communication after an error
Briefly own the need for a retake: “The sensor shifted, so this one is blurry—I’ll adjust and take one more.” Patients tolerate a purposeful retake better than silent repeated failures. Chart significant artifacts or retakes when required by office policy.
Artifact literacy keeps you from “correcting” a scratched PSP by raising mA, or treating an earring ghost as a bony lesion. That discrimination is core RHS technique judgment under I.D.6–7.