Study guide

9.3 Filtration Collimation PID Shielding

DANB RHS Study Guide 2026 Exam

Track your progress as you read

Finished sections get a check mark.

1 About the DANB RHS Exam

About the DANB RHS Exam Digital-Only Scope & CAT Scoring CDA/NELDA Pathway Context

2 Image Types & Diagnostic Purpose

Why Dental Images Matter Periapical & Bitewing Purposes FMX Occlusal Panoramic Ceph CBCT Diagnostically Acceptable Features

3 Anatomical Landmarks & Conditions on Images

Apical Pathology & Caries on Images Anomalies Implants Edentulous Periodontal Sinus TMJ Findings Localization of Impacted Objects

4 Procedures & Techniques to Acquire Images

4.1 History, Contraindications, and Prep 4.2 Receptor Holders, PID, and Tubehead 4.3 Paralleling Technique 4.4 Bisecting-Angle Technique 4.5 Panoramic Acquisition Basics

5 Technique Modifications & Error Correction

Anatomical Variations Mods (Tori, Cleft, Shallow Palate, Narrow Arch) Exposure Density Contrast Errors (mA/kVp/Time) Angulation Overlap Distortion Artifacts Movement Sensor Issues

6 Mounting, Viewing & Legal Requirements

Viewing Mounting Landmarks Radiopaque vs Radiolucent Orientation HIPAA Retention Ownership Charting

7 Radiation Physics Basics

7.1 kVp, mA, Time, Dose & Production 7.2 Wavelength, Frequency & Velocity 7.3 Primary vs Scatter Radiation

8 Radiation Biology & Measurement Units

8.1 Cell Tissue Sensitivity 8.2 Latent Recovery Genetic Somatic 8.3 Gy Sv R rem C/kg Units

9 Radiation Protection for Patient & Operator

9.1 MPD Cumulative Effective Dose 9.2 Barrier Position Distance ALARA 9.3 Filtration Collimation PID Shielding 9.4 Malfunction Protocol Patient Consent

10 Infection Prevention & Control for Radiography

Room Barriers Contact Surfaces Critical Semi-Critical Noncritical Items Hand Hygiene PPE Cross-Contamination

9.3 Filtration Collimation PID Shielding

Key Takeaways Explain This Topic AI

Filtration (inherent + added aluminum) removes low-energy photons that increase patient dose without forming the image.

Collimation limits beam size; rectangular collimation is preferred because it reduces patient dose and scatter versus round beams.

The PID aims the beam and sets source-to-skin geometry; long open-ended PIDs are preferred with paralleling when feasible.

Lead aprons and thyroid collars attenuate scatter; store them to avoid cracks and follow current ADA/FDA guidance and office policy.

Shielding supplements—but never replaces—justification, collimation, filtration, and correct first-exposure technique.

Last updated: July 2026

Filtration, Collimation, PID & Shielding

Quick Answer: Filtration removes low-energy x-rays that would add patient dose without forming the image. Collimation restricts beam size (rectangular is preferred). The PID aims and helps shape the beam. Patient shielding (apron/thyroid collar) attenuates scatter to the torso and neck per current ADA/FDA guidance and office policy.

Equipment Features That Are Protection Devices

Candidates sometimes treat filtration and collimation as “physics only.” On RHS Outline II.C , they are patient dose controls built into the machine and technique. Combined with digital receptors and correct exposure factors, they are how ADA/FDA optimization is implemented in the operatory.

Filtration

Filtration preferentially absorbs long-wavelength (low-energy) photons that lack the energy to reach the receptor as useful image signal but would still be absorbed in superficial tissues.

Key points:

Inherent filtration comes from the glass window, insulating oil, and tube housing materials.

Added filtration (usually aluminum) is installed to meet total filtration requirements.

Total filtration = inherent + added. Federal performance standards require adequate total filtration for the operating kVp range (commonly discussed as 1.5 mm Al equivalent below 70 kVp and 2.5 mm Al equivalent at/above 70 kVp—know the concept that higher kVp units need more filtration).

Removing or bypassing filtration to “get a darker image” is unsafe and illegal in regulated equipment—fix density with proper exposure factors and processing/display, not by stripping filtration.

Filtration hardens the beam (raises average energy) and lowers patient skin dose for a given useful beam.

Collimation

Collimation limits the cross-sectional size of the x-ray beam to the area needed for the receptor. Less irradiated tissue means less patient dose and less scatter (which also helps image contrast and slightly helps operator scatter exposure).

  • Collimator style Effect on dose / scatter RHS takeaway
  • Round open-ended Larger field than most intraoral receptors Acceptable on many units but not dose-optimal
  • Rectangular Field closer to receptor size Preferred —reduces patient dose substantially vs round

Too wide / misaligned Cone cut risk if shifted, or excess tissue dose if oversized Align PID to receptor; do not “open up” the field casually

Federal limits historically capped beam diameter at the skin for intraoral units (often cited near 2.75 inches / 7 cm for round beams). Rectangular collimation aims to keep the beam no larger than needed for the receptor.

Cone cut means part of the receptor was outside the beam—an alignment error. Fix alignment; do not permanently enlarge collimation as a “solution,” because that raises dose for every future exposure.

PID (Position-Indicating Device)

The PID (also called the cone, though modern open-ended PIDs are not pointed closed cones) establishes source-to-skin distance and helps aim the beam.

Long PID (often 12–16 inches) is generally preferred with paralleling technique: better geometry, and for a given output at the receptor, the longer distance relates to technique charts—follow manufacturer settings.

Short PID increases divergence and can raise skin dose for comparable receptor exposure if technique is not adjusted correctly.

Open-ended, lead-lined PIDs reduce scatter from the device itself compared with older pointed plastic cones.

Never hold the PID during exposure; stabilize the tubehead arm so it does not drift.

PID length is a technique and protection variable: know that paralleling + long PID is the usual preferred combination when anatomy allows.

Patient Shielding: Apron and Thyroid Collar

Lead aprons (or lead-equivalent aprons) and thyroid collars reduce scatter to the torso and thyroid region. Store aprons on hangers or flat—folding can crack the attenuating layer. Visually inspect for tears; damaged aprons should be removed from service.

Current ADA/FDA discussions emphasize that with modern rectangular collimation, proper technique, and digital receptors, gonadal/fetal dose from intraoral imaging is already extremely low; offices follow current professional guidance and state rules on when aprons/collars are used, especially for thyroid protection and for patients who request shielding. For the exam, know the devices’ purpose, care, and that shielding is adjunct protection—not a substitute for collimation, filtration, selection criteria, or correct first-exposure technique.

Special notes often tested:

Thyroid collar may be omitted for some panoramic or extraoral projections if it would appear in the image and force a retake—follow projection requirements.

Do not place shielding in the primary beam path over the area being imaged.

Operator shielding is primarily the room barrier , not the patient’s apron.

Putting the Four Together

A dose-smart exposure looks like this: justified order → correct receptor and holder → rectangular collimation aligned to receptor → adequate filtration intact → appropriate kVp/mA/time for digital → long PID/paralleling when feasible → patient shielding per policy/guidance → operator behind barrier. Skip any one step and ALARA weakens.

Exam Traps

Confusing filtration (removes soft photons) with collimation (limits field size).

Thinking rectangular collimation only improves image sharpness (it mainly cuts dose/scatter ).

Using a damaged apron “because lead is still mostly there.”

Pointed closed cones as modern best practice (they are outdated relative to open-ended PIDs).

Bottom Line

Filtration cleans the beam, collimation shrinks the field, the PID aims with proper distance, and shielding backs up scatter control—together they operationalize ADA/FDA optimization for Outline II.C.