Study guide

1.3 Legal Descriptions and Surveys

Delaware Real Estate Salesperson Exam

Track your progress as you read

Finished sections get a check mark.

1 Standalone Coverage Map

How This Guide Maps to the Delaware Salesperson Exam

2 Introduction: Delaware Real Estate Exam Overview

Delaware Real Estate Salesperson Exam Overview

3 National Portion: Chapter 1: Real Property Characteristics, Legal Descriptions & Property Use

1.1 Real Property vs. Personal Property 1.2 Physical and Economic Characteristics of Real Property 1.3 Legal Descriptions and Surveys 1.4 Land-Use Controls, Public & Private Restrictions, and Encumbrances

4 National Portion: Chapter 2: Forms of Ownership, Transfer & Recording of Title

2.1 Estates, Ownership Forms, Rights, and Interests 2.2 Deeds, Title Transfer, Title Insurance, and Recording

5 National Portion: Chapter 3: Property Value & Appraisal

3.1 The Concept of Value and Economic Principles 3.2 The Appraisal Process and USPAP Basics 3.3 Valuation Approaches (Sales Comparison, Cost, Income) and BPOs

6 National Portion: Chapter 4: Real Estate Contracts & Agency

4.1 Contract Types and Required Elements 4.2 Contract Performance, Breach, and Enforceability 4.3 Listing and Sales Contracts and Contingencies 4.4 Agency Relationships, Fiduciary Duties, and Disclosure

7 National Portion: Chapter 5: Real Estate Practice (Brokerage, Fair Housing, Risk)

5.1 Broker Responsibilities, Brokerage Agreements, and Compensation 5.2 Federal Fair Housing Law and Protected Classes 5.3 Advertising, Antitrust, and Risk Management

8 National Portion: Chapter 6: Property Disclosures & Environmental Issues

6.1 Property Conditions and Environmental Hazards 6.2 Disclosure Obligations, Stigmatized Property, and Liability

9 National Portion: Chapter 7: Financing & Settlement

7.1 Financing Concepts, Notes, Mortgages, and Deeds of Trust 7.2 Loan Types, Lender Requirements, PMI, and Mortgage Insurance 7.3 Federal Financing Regulations (RESPA, TILA, ECOA, TRID) 7.4 Settlement, Closing Statements, and Prorations

10 National Portion: Chapter 8: Real Estate Math Calculations

8.1 Area, Volume, and Valuation Calculations 8.2 Commission, Financing, and Interest Calculations 8.3 Proration, Transfer Tax, and Investment Math

11 Chapter 1: Delaware Real Estate Commission & Licensing

1.1 Delaware Real Estate Commission Overview 1.2 Delaware License Requirements 1.3 Delaware License Types and Broker Supervision 1.4 License Maintenance and Renewal

12 Chapter 2: Agency & Disclosure

2.1 Delaware Agency Relationships 2.2 Dual Agency and Designated Agency in Delaware 2.3 Delaware Licensee Duties and Standards of Conduct 2.4 Commission and Compensation Rules

13 Chapter 3: Contracts & Property

3.1 Delaware Purchase Contracts 3.2 Delaware Seller Disclosure Requirements 3.3 Delaware Property Ownership and Rights 3.4 Delaware Settlement Procedures

14 Chapter 4: Trust Accounts & Violations

4.1 Delaware Trust Account Requirements 4.2 Delaware Fair Housing Laws 4.3 Delaware License Law Violations and Discipline 4.4 Delaware Environmental Issues and Special Topics

1.3 Legal Descriptions and Surveys

Key Takeaways Explain This Topic AI

Three legal-description methods are tested: metes and bounds (point of beginning, bearings, distances), lot and block (recorded subdivision plat), and the rectangular (government) survey (township, range, section)

In the rectangular survey, 1 section = 640 acres (1 mile by 1 mile); a quarter section = 160 acres, and a quarter of a quarter = 40 acres

Read fractional descriptions right to left: multiply 640 by each fraction to size the parcel

A metes-and-bounds description must close by returning to the point of beginning, or the description is defective

Surveys reveal boundaries, easements, setbacks, and encroachments; an encroachment is resolved by removal, an easement, or a boundary agreement before closing

Last updated: June 2026

Why a Legal Description, Not an Address

A street address can change and is not precise enough to convey title. Every valid deed must carry a legal description , a permanent, unambiguous identification of the parcel that ties to public records. Three systems dominate the national exam.

1) Metes and Bounds

The oldest method, common for irregular or historic parcels. It starts at a fixed point of beginning (POB) , then traces the perimeter using metes (distances) and bounds (directions or monuments). A reading might run: "Beginning at the iron pin at the NE corner, thence S 90 ft, thence W 120 ft..." The description must close , meaning it must return to the POB. A description that does not return to its POB is fatally defective.

2) Lot and Block (Recorded Plat)

Used in subdivisions. A surveyor records a plat map with the county, dividing the tract into numbered lots and blocks. The legal description then reads simply, for example, "Lot 7, Block 3, Sunset Ridge Subdivision, as recorded in Plat Book 12, Page 45." It is the easiest to read and verify.

3) Rectangular (Government) Survey

Also called the Public Land Survey System , used across most of the central and western states. It overlays the country with a grid of principal meridians (north-south lines) and base lines (east-west lines), then subdivides into townships and sections.

  • Method Key identifiers Typical use
  • Metes and bounds POB, bearings, distances, monuments Irregular or older parcels
  • Lot and block Lot, block, plat book and page Subdivisions
  • Rectangular survey Township, range, section Rural and western land

Rectangular Survey Math

This is the most heavily calculated topic in the chapter, so memorize the base units:

A township is 6 miles by 6 miles = 36 square miles, divided into 36 sections .

A section is 1 mile by 1 mile = 640 acres .

A half section = 320 acres; a quarter section = 160 acres; a quarter of a quarter = 40 acres.

  • Fraction of a section Acres
  • Full section 640
  • 1/2 320
  • 1/4 160
  • 1/8 80
  • 1/16 40
  • Worked Calculation
  • Size the parcel described as "the SE 1/4 of the NW 1/4 of Section 12 ."

Read the description right to left and multiply the fractions by 640:

Start with the full section: 640 acres.

NW 1/4 of the section: 640 x 1/4 = 160 acres .

SE 1/4 of that quarter: 160 x 1/4 = 40 acres .

The parcel is 40 acres. A faster shortcut is to multiply all denominators: 4 x 4 = 16, then divide 640 by 16 = 40 acres. Either route lands on the same answer, and the multiply-the-denominators shortcut is the quickest under time pressure.

Surveys, Monuments, and Setbacks

A survey physically locates boundaries on the ground and reports dimensions, improvements, easements, and setbacks. Key vocabulary:

Monuments are physical boundary markers (iron pins, stones), either natural or artificial.

Benchmarks are permanent reference points used to measure elevation , not horizontal boundaries.

Setbacks are the minimum distances a structure must sit from the property line under zoning.

Lenders commonly require a survey before funding a mortgage so the collateral's boundaries are certain. Survey types range from a basic mortgage location survey to a detailed ALTA survey that maps easements and encroachments.

Encroachments and Boundary Problems

An encroachment is an unauthorized physical intrusion of one owner's improvement onto a neighbor's land, such as a fence, eave, or driveway crossing the line. Even a two-foot encroachment can cloud title and stall financing. When a survey reveals one, the parties typically resolve it before closing through one of three remedies:

  • Removal of the encroaching structure,
  • An easement granting the right to remain, or

A recorded boundary line agreement adjusting the line.

Exam tip: If the description uses township and range, it is the rectangular survey. If it uses a POB with compass bearings, it is metes and bounds. If it cites a recorded subdivision plat, it is lot and block.

Rectangular Survey Units to Memorize

The government survey system stacks predictable units, and the exam tests every conversion:

  • Unit Size
  • Township 6 miles by 6 miles = 36 square miles = 36 sections
  • Section 1 mile by 1 mile = 640 acres
  • Half section 320 acres
  • Quarter section 160 acres
  • Acre 43,560 square feet

To size any fractional description, multiply the fractions and apply them to 640 acres . For "the SW 1/4 of the SE 1/4 of a section," compute 1/4 x 1/4 = 1/16, then 640 / 16 = 40 acres . Each time you read "of the," you are multiplying another fraction. Reading the description from the back forward (smallest parcel first) helps you visualize the nesting.

Vertical Descriptions and Datum

Legal descriptions are not only horizontal. A datum is an established reference point of elevation (the most common is the U.S. Geological Survey datum, mean sea level at New York Harbor) used to describe the height of a structure or the depth of a basement. A benchmark is a permanent marker showing elevation relative to the datum. These matter for air rights (the right to use space above the land, sold for high-rise condominiums or to protect a view) and subsurface rights (mineral, oil, and gas rights below the surface).

A condominium unit on the twelfth floor is legally described by reference to the recorded condominium plat plus its elevation, not by metes and bounds on the ground.