Study guide

6.2 The 1:1 Rule & Dynamic Buffer Distance Planning

EASA A2 Certificate of Competency Drone

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Regulatory Framework & A2 Operations

1.1 EASA Regulatory Framework & A2 Overview 1.2 Prerequisites & Practical Self-Training Declaration 1.3 Class C2 UAS Technical Standards & Airspace Rules

2 Chapter 2: Meteorology — Atmospheric Physics & Surface Winds

2.1 Atmospheric Pressure, Temperature & Density Altitude 2.2 Surface Winds, Wind Gradient & Operating Limits 2.3 Urban Micro-Meteorology & Building Turbulence

3 Chapter 3: Meteorology — Moisture, Visibility & Weather Planning

3.1 Visibility Standards, Fog vs. Mist & Cloud Hazards 3.2 Temperature Inversions, Fronts & Local Circulations 3.3 Aviation Weather Reports (METAR/TAF) & Flight Planning

4 Chapter 4: UAS Aerodynamics, Performance & Energy Dynamics

4.1 Aerodynamics, Multirotor Dynamics & Flight Envelope 4.2 Mass, Balance & Payload Integration 4.3 Kinetic Energy Dynamics & Low-Speed Mode Rationale

5 Chapter 5: Electrical Systems, Batteries & Failsafes

5.1 LiPo Battery Technology, Cold-Weather Degradation & Safety 5.2 Flight Endurance, Wind Compensation & Reserve Planning 5.3 GNSS, Compass Interference & Failsafe Return-to-Home

6 Chapter 6: Ground-Risk Mitigation & Operational Safety

6.1 Horizontal Separation Distances & Low-Speed Mode 6.2 The 1:1 Rule & Dynamic Buffer Distance Planning 6.3 Site Survey, Assemblies of People & Incident Reporting

6.2 The 1:1 Rule & Dynamic Buffer Distance Planning

Key Takeaways Explain This Topic AI

AMC1 UAS.OPEN.030(1) gives the 1:1 rule as a reference: when flying close to people, keep a lateral distance from any uninvolved person at least equal to the flying height ( d h o r i z o n t a l ≥ h f l i g h t d_{horizontal} \ge h_{flight} d h or i zo n t a l ​ ≥ h f l i g h t ​ ).

The 30 m and 5 m distances are minimums set by the regulation; once the flying height exceeds them, the 1:1 reference calls for a larger distance, so low-speed mode only allows 5 m when flying at 5 m or lower.

The physical rationale of the 1:1 rule derives from ballistic mechanics: a multirotor suffering catastrophic propulsion failure travels horizontally along a parabolic trajectory ( d g l i d e = v 0 ⋅ t f a l l d_{glide} = v_0 \cdot t_{fall} d g l i d e ​ = v 0 ​ ⋅ t f a ll ​ ).

Ambient wind displaces a falling aircraft downwind by an additional distance equal to wind speed multiplied by free-fall time ( d w i n d = v w i n d ⋅ t f a l l d_{wind} = v_{wind} \cdot t_{fall} d w in d ​ = v w in d ​ ⋅ t f a ll ​ ).

Flying upwind of uninvolved persons requires expanding the safety buffer substantially to account for combined ballistic forward velocity and wind drift pushing the aircraft toward bystanders.

Last updated: October 2026

The 1:1 Rule & Dynamic Buffer Distance Planning

Note

Core Regulatory Principle: Under AMC1 UAS.OPEN.030(1) , safe separation from uninvolved persons cannot be treated as a static two-dimensional distance measured along the ground. As an unmanned aircraft climbs into the air, its potential energy increases and its ground impact footprint expands dramatically. The 1:1 rule (height-to-distance rule) establishes a direct proportional relationship between operating altitude and minimum horizontal standoff distance.

The 1:1 Rule Principle (AMC1 UAS.OPEN.030(1))

The 1:1 rule is a reference given in EASA's Acceptable Means of Compliance (AMC1 UAS.OPEN.030(1)(b)). It says that, when the UA is operating close to people:

The remote pilot should keep the UA at a lateral distance from any uninvolved person that is not shorter than its height (for example, at 30 m height, at least 30 m away):

d horizontal ≥ h flight d_{\text{horizontal}} \ge h_{\text{flight}} d horizontal ​ ≥ h flight ​

AMC is not law in itself. It is the accepted way of showing compliance with the regulation's requirement to keep a safe horizontal distance, and departing from it would mean showing another way of achieving the same safety. In practice, and for the exam, treat the 1:1 reference as the expected minimum. AMC1 also says the distance is measured from the point where the UA would hit the ground in a vertical fall.

Interaction with the 30 m and 5 m Minimums

Candidates often struggle with how the 1:1 reference combines with the regulation's 30 m standard distance and 5 m low-speed distance. Combining them gives a maximum function :

d separation = max ⁡ ( d floor , h flight ) d_{\text{separation}} = \max(d_{\text{floor}},\; h_{\text{flight}}) d separation ​ = max ( d floor ​ , h flight ​ )

Where:

d floor = 30 m d_{\text{floor}} = 30\text{ m} d floor ​ = 30 m under standard flight mode;

d floor = 5 m d_{\text{floor}} = 5\text{ m} d floor ​ = 5 m under active low-speed mode ( ≤ 3 m/s \le 3\text{ m/s} ≤ 3 m/s );

h flight h_{\text{flight}} h flight ​ is the height of the drone above ground level (AGL). +-------------------------------------------------------------------------+

  • | GOVERNING HORIZONTAL DISTANCE LOGIC |
  • +-------------------------------------------------------------------------+
  • | At low altitudes (h < d_floor): |
  • | The static floor governs! |
  • | - Standard Mode: At 10 m altitude -> Maintain at least 30 m. |
  • | - Low-Speed Mode: At 3 m altitude -> Maintain at least 5 m. |
  • | |
  • | At high altitudes (h >= d_floor): |
  • | The 1:1 rule governs! |
  • | - Standard Mode: At 50 m altitude -> Maintain at least 50 m. |
  • | - Standard Mode: At 120 m altitude -> Maintain at least 120 m. |
  • | - Low-Speed Mode: At 40 m altitude -> Maintain at least 40 m! |
  • +-------------------------------------------------------------------------+

Caution

The Low-Speed Altitude Trap: A widespread misconception among novice pilots is assuming that activating low-speed mode allows flying 5 m away horizontally from people at any altitude.

This is wrong. At a height of 45 m 45\text{ m} 45 m , the 1:1 reference means your horizontal distance to uninvolved persons should be at least 45 m 45\text{ m} 45 m , whether or not low-speed mode is on. Low-speed mode only allows you to compress the horizontal buffer down to 5 m 5\text{ m} 5 m when your flight height is 5 m 5\text{ m} 5 m or lower!

Physical Rationale: Ballistic Trajectories and Free-Fall Dynamics

Why does the 1:1 reference make sense? Unlike fixed-wing aircraft, multirotors generate lift exclusively through motorized rotating airfoils. If an electronic speed controller (ESC) fails, a motor burns out, a propeller sheds a blade, or a battery terminal disconnects, the aircraft loses all aerodynamic lift instantly.

Without lift, the drone behaves as an unguided projectile subject to the laws of Newtonian mechanics. Drone Failure at Altitude h, Velocity v0

  • (o)========> v0 (horizontal cruise velocity)
  • | \
  • | \
  • | \ Parabolic Ballistic Arc
  • | \
  • h | \ t_fall = sqrt(2h / g)
  • | \
  • | \
  • | \ Ground Impact Point
  • --=================X-------------------
  • d_glide = v0 * t_fall
  • 1. Free-Fall Duration Calculation

Neglecting vertical air resistance during initial acceleration, the time t fall t_{\text{fall}} t fall ​ (in seconds) required for an object to fall from height h h h (in meters) under gravitational acceleration ( g ≈ 9.81 m/s 2 g \approx 9.81\text{ m/s}^2 g ≈ 9.81 m/s 2 ) is:

t fall = 2 h g t_{\text{fall}} = \sqrt{\frac{2h}{g}} t fall ​ = g 2 h ​ ​

From h = 10 m h = 10\text{ m} h = 10 m : t fall = 20 9.81 ≈ 1.43 s t_{\text{fall}} = \sqrt{\frac{20}{9.81}} \approx 1.43\text{ s} t fall ​ = 9.81 20 ​ ​ ≈ 1.43 s

From h = 30 m h = 30\text{ m} h = 30 m : t fall = 60 9.81 ≈ 2.47 s t_{\text{fall}} = \sqrt{\frac{60}{9.81}} \approx 2.47\text{ s} t fall ​ = 9.81 60 ​ ​ ≈ 2.47 s

From h = 50 m h = 50\text{ m} h = 50 m : t fall = 100 9.81 ≈ 3.19 s t_{\text{fall}} = \sqrt{\frac{100}{9.81}} \approx 3.19\text{ s} t fall ​ = 9.81 100 ​ ​ ≈ 3.19 s

From h = 80 m h = 80\text{ m} h = 80 m : t fall = 160 9.81 ≈ 4.04 s t_{\text{fall}} = \sqrt{\frac{160}{9.81}} \approx 4.04\text{ s} t fall ​ = 9.81 160 ​ ​ ≈ 4.04 s

From h = 120 m h = 120\text{ m} h = 120 m : t fall = 240 9.81 ≈ 4.95 s t_{\text{fall}} = \sqrt{\frac{240}{9.81}} \approx 4.95\text{ s} t fall ​ = 9.81 240 ​ ​ ≈ 4.95 s

2. Ballistic Horizontal Coasting Distance

If the drone is traveling at horizontal velocity v 0 v_0 v 0 ​ when power is lost, inertia carries the airframe forward while gravity pulls it downward. The horizontal ground distance traversed during the fall ( d glide d_{\text{glide}} d glide ​ ) is:

d glide = v 0 ⋅ t fall = v 0 ⋅ 2 h g d_{\text{glide}} = v_0 \cdot t_{\text{fall}} = v_0 \cdot \sqrt{\frac{2h}{g}} d glide ​ = v 0 ​ ⋅ t fall ​ = v 0 ​ ⋅ g 2 h ​ ​

Consider an aircraft cruising at standard speed ( v 0 = 15 m/s v_0 = 15\text{ m/s} v 0 ​ = 15 m/s , or 54 km/h 54\text{ km/h} 54 km/h ) at an altitude of 50 m 50\text{ m} 50 m :

d glide = 15 m/s × 3.19 s ≈ 47.9 m d_{\text{glide}} = 15\text{ m/s} \times 3.19\text{ s} \approx 47.9\text{ m} d glide ​ = 15 m/s × 3.19 s ≈ 47.9 m

Notice the striking result: 47.9 m 47.9\text{ m} 47.9 m is almost exactly equal to the flight altitude of 50 m 50\text{ m} 50 m !

This illustrates the physics behind the AMC1 UAS.OPEN.030(1) reference: at typical cruising speeds, an unpowered multirotor travels forward by roughly its release height before hitting the ground. Keeping d horizontal ≥ h d_{\text{horizontal}} \ge h d horizontal ​ ≥ h therefore helps keep the impact point of a sudden failure away from bystanders. At low speed the forward throw is much smaller (at 3 m/s 3\text{ m/s} 3 m/s from 50 m 50\text{ m} 50 m it is under 10 m 10\text{ m} 10 m ), so the 1:1 reference is generous for slow flight but only just enough for fast flight.

A Third Reference: Reaction Distance

The AMC for subcategory A3 (AMC1 UAS.OPEN.040(1)) estimates the minimum distance from a person passing through the area as no less than 30 m, no less than the height (1:1), and no less than the distance the UA would cover in 2 seconds at maximum speed , assuming a 2-second reaction time. That third reference is written for A3, but it is a useful planning check in A2 too: a drone capable of 20 m/s 20\text{ m/s} 20 m/s covers 40 m 40\text{ m} 40 m in 2 seconds.

Wind-Adjusted Dynamic Buffers

The 1:1 rule assumes a static or zero-wind atmosphere. In real-world flight operations, ambient wind exerts continuous horizontal aerodynamic drag upon the airframe as it tumbles or falls. This introduces wind drift displacement ( d wind d_{\text{wind}} d wind ​ ):

d wind = v wind ⋅ t fall = v wind ⋅ 2 h g d_{\text{wind}} = v_{\text{wind}} \cdot t_{\text{fall}} = v_{\text{wind}} \cdot \sqrt{\frac{2h}{g}} d wind ​ = v wind ​ ⋅ t fall ​ = v wind ​ ⋅ g 2 h ​ ​

Total Dynamic Safety Buffer Formula

When planning operations near uninvolved persons, the prudent remote pilot must calculate a total downwind dynamic safety buffer:

d buffer = h flight + ( v wind ⋅ 2 h flight g ) d_{\text{buffer}} = h_{\text{flight}} + \left(v_{\text{wind}} \cdot \sqrt{\frac{2h_{\text{flight}}}{g}}\right) d buffer ​ = h flight ​ + ( v wind ​ ⋅ g 2 h flight ​ ​ ​ )

Loading diagram...

Upwind vs. Downwind Flight Geometry

The spatial orientation of the drone relative to wind direction and uninvolved persons is critical:

Upwind of Uninvolved Persons (Wind blowing from drone toward people): This is the highest-risk geometry . If propulsion cuts out, initial forward inertia and ambient wind drift combine to blow the falling drone directly toward the people. The horizontal separation distance must be expanded significantly beyond the 1:1 baseline!

Downwind of Uninvolved Persons (Wind blowing from people toward drone): This is a favorable geometry . If a catastrophic failure occurs, the ambient wind blows the aircraft further downwind, away from the uninvolved individuals and into open ground.

Comprehensive Calculation Reference Table

The table below shows free-fall times, the regulation's minimums, the 1:1 reference distance and a wind-adjusted planning buffer across typical heights. The buffer method is conservative, because it assumes the falling drone drifts at the full wind speed:

Flight Altitude ( h h h ) Free-Fall Time ( t fall t_{\text{fall}} t fall ​ ) Standard Legal Floor Low-Speed Legal Floor Governing 1:1 Distance Drift in 5 m/s Wind ( 18 km/h 18\text{ km/h} 18 km/h ) Planning Buffer When People Are Downwind (5 m/s Wind)

5 m 1.01 s 1.01\text{ s} 1.01 s 30 m 30\text{ m} 30 m 5 m 5\text{ m} 5 m 5 m 5\text{ m} 5 m (low-speed) + 5.1 m +5.1\text{ m} + 5.1 m 10.1 m 10.1\text{ m} 10.1 m

10 m 1.43 s 1.43\text{ s} 1.43 s 30 m 30\text{ m} 30 m 5 m 5\text{ m} 5 m 30 m 30\text{ m} 30 m (std) / 10 m 10\text{ m} 10 m (ls) + 7.2 m +7.2\text{ m} + 7.2 m 37.2 m 37.2\text{ m} 37.2 m (std) / 17.2 m 17.2\text{ m} 17.2 m (ls)

20 m 2.02 s 2.02\text{ s} 2.02 s 30 m 30\text{ m} 30 m 5 m 5\text{ m} 5 m 30 m 30\text{ m} 30 m (std) / 20 m 20\text{ m} 20 m (ls) + 10.1 m +10.1\text{ m} + 10.1 m 40.1 m 40.1\text{ m} 40.1 m (std) / 30.1 m 30.1\text{ m} 30.1 m (ls)

30 m 2.47 s 2.47\text{ s} 2.47 s 30 m 30\text{ m} 30 m 5 m 5\text{ m} 5 m 30 m 30\text{ m} 30 m + 12.4 m +12.4\text{ m} + 12.4 m 42.4 m 42.4\text{ m} 42.4 m

50 m 3.19 s 3.19\text{ s} 3.19 s 30 m 30\text{ m} 30 m 5 m 5\text{ m} 5 m 50 m 50\text{ m} 50 m + 16.0 m +16.0\text{ m} + 16.0 m 66.0 m 66.0\text{ m} 66.0 m

80 m 4.04 s 4.04\text{ s} 4.04 s 30 m 30\text{ m} 30 m 5 m 5\text{ m} 5 m 80 m 80\text{ m} 80 m + 20.2 m +20.2\text{ m} + 20.2 m 100.2 m 100.2\text{ m} 100.2 m

120 m 4.95 s 4.95\text{ s} 4.95 s 30 m 30\text{ m} 30 m 5 m 5\text{ m} 5 m 120 m 120\text{ m} 120 m + 24.7 m +24.7\text{ m} + 24.7 m 144.7 m 144.7\text{ m} 144.7 m

  • Practical Worked Operational Scenarios
  • Scenario 1: High-Altitude Facade Inspection

Flight Profile: A remote pilot operates a Class C2 drone at an altitude of 60 m 60\text{ m} 60 m AGL to inspect the upper floors of an office tower. A public plaza with uninvolved pedestrians is located nearby.

Low-Speed Mode: Engaged (speed ≤ 3 m/s \le 3\text{ m/s} ≤ 3 m/s ).

Determination: Even though low-speed mode is active, the pilot should not fly 5 m 5\text{ m} 5 m horizontally from the pedestrians in the plaza. Because the height is 60 m 60\text{ m} 60 m , the 1:1 reference governs:

d separation = max ⁡ ( 5 m , 60 m ) = 60 m d_{\text{separation}} = \max(5\text{ m},\; 60\text{ m}) = 60\text{ m} d separation ​ = max ( 5 m , 60 m ) = 60 m

The pilot should keep at least 60 m 60\text{ m} 60 m of horizontal clearance from the plaza edge.

Scenario 2: Roof Survey with Ambient Wind

Flight Profile: Inspecting a factory roof at 45 m 45\text{ m} 45 m altitude in standard mode.

Wind Conditions: Wind is blowing at 8 m/s 8\text{ m/s} 8 m/s ( 29 km/h 29\text{ km/h} 29 km/h ) directly toward a public highway located east of the factory.

Calculation:

Free-fall time from 45 m 45\text{ m} 45 m : t fall = 90 9.81 ≈ 3.03 s t_{\text{fall}} = \sqrt{\frac{90}{9.81}} \approx 3.03\text{ s} t fall ​ = 9.81 90 ​ ​ ≈ 3.03 s .

Wind drift toward highway: d wind = 8 m/s × 3.03 s ≈ 24.2 m d_{\text{wind}} = 8\text{ m/s} \times 3.03\text{ s} \approx 24.2\text{ m} d wind ​ = 8 m/s × 3.03 s ≈ 24.2 m .

Base 1:1 standoff: 45 m 45\text{ m} 45 m .

Total required upwind buffer: 45 m + 24.2 m = 69.2 m 45\text{ m} + 24.2\text{ m} = 69.2\text{ m} 45 m + 24.2 m = 69.2 m .

Operational Decision: If the drone is west of the highway (upwind), the pilot must maintain at least 70 m 70\text{ m} 70 m of horizontal separation from the highway boundary to ensure an unpowered tumbling drone does not drift into traffic.