Study guide
4.3 Kinetic Energy Dynamics & Low-Speed Mode Rationale
EASA A2 Certificate of Competency Drone
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Regulatory Framework & A2 Operations
1.1 EASA Regulatory Framework & A2 Overview 1.2 Prerequisites & Practical Self-Training Declaration 1.3 Class C2 UAS Technical Standards & Airspace Rules
2 Chapter 2: Meteorology — Atmospheric Physics & Surface Winds
2.1 Atmospheric Pressure, Temperature & Density Altitude 2.2 Surface Winds, Wind Gradient & Operating Limits 2.3 Urban Micro-Meteorology & Building Turbulence
3 Chapter 3: Meteorology — Moisture, Visibility & Weather Planning
3.1 Visibility Standards, Fog vs. Mist & Cloud Hazards 3.2 Temperature Inversions, Fronts & Local Circulations 3.3 Aviation Weather Reports (METAR/TAF) & Flight Planning
4 Chapter 4: UAS Aerodynamics, Performance & Energy Dynamics
4.1 Aerodynamics, Multirotor Dynamics & Flight Envelope 4.2 Mass, Balance & Payload Integration 4.3 Kinetic Energy Dynamics & Low-Speed Mode Rationale
5 Chapter 5: Electrical Systems, Batteries & Failsafes
5.1 LiPo Battery Technology, Cold-Weather Degradation & Safety 5.2 Flight Endurance, Wind Compensation & Reserve Planning 5.3 GNSS, Compass Interference & Failsafe Return-to-Home
6 Chapter 6: Ground-Risk Mitigation & Operational Safety
6.1 Horizontal Separation Distances & Low-Speed Mode 6.2 The 1:1 Rule & Dynamic Buffer Distance Planning 6.3 Site Survey, Assemblies of People & Incident Reporting
4.3 Kinetic Energy Dynamics & Low-Speed Mode Rationale
Key Takeaways Explain This Topic AI
Kinetic energy scales quadratically with airspeed according to the formula Ek = 1/2 * m * v^2; doubling an aircraft's velocity quadruples its destructive kinetic energy (4x), while tripling velocity increases energy ninefold (9x).
For a 3.5 kg Class C2 drone, reducing speed from standard cruising velocity of 15 m/s (393.75 J) to active low-speed mode of 3 m/s (15.75 J) achieves a massive 96% reduction in horizontal impact energy.
In the worked example, a 3.5 kg multirotor falling from 120 m reaches a drag-limited terminal velocity of about 25 m/s and strikes with about 1,100 J, regardless of whether low-speed mode was active.
EU drone rules use 80 J as a reference point: Class C1 drones must transmit less than 80 J to a human head on impact (or weigh under 900 g), and operator registration applies to drones that could transfer more than 80 J to a person.
UAS.OPEN.030(1) lets the distance shrink from 30 m to 5 m only with an active low-speed mode (≤ 3 m/s) and after evaluating weather, performance and segregation; the 96% energy reduction explains the logic but does nothing to reduce fall energy from height.
Last updated: October 2026
Kinetic Energy Dynamics & Low-Speed Mode Rationale
Note
The Physics of Ground Risk: Much of the EASA open-category design, including the A2 privileges, is about limiting the energy a drone can deliver to a person. The rule letting a pilot fly a 3.5 kg drone as close as 5 meters to uninvolved people with low-speed mode active, but only 30 meters away otherwise, is largely explained by one equation of classical mechanics: E k = 1 2 m v 2 E_k = \frac{1}{2} m v^2 E k = 2 1 m v 2 .
The Kinetic Energy Equation & Quadratic Velocity Scaling
Kinetic energy ( E k E_k E k ) is the mechanical energy possessed by an object due to its motion. It represents the total amount of physical work required to accelerate an aircraft from rest to its current velocity—and conversely, the exact amount of destructive energy transferred to an obstacle or human body during an impact before the aircraft comes to a complete stop:
E k = 1 2 m v 2 E_k = \frac{1}{2} m v^2 E k = 2 1 m v 2
Where:
E k E_k E k is kinetic energy measured in Joules (J) ( 1 J = 1 kg ⋅ m 2 / s 2 1\text{ J} = 1\text{ kg}\cdot\text{m}^2/\text{s}^2 1 J = 1 kg ⋅ m 2 / s 2 ),
m m m is the total mass of the unmanned aircraft system in kilograms (kg) ,
v v v is the velocity of the aircraft relative to the ground in meters per second (m/s) .
Loading diagram...
The Quadratic Relationship
The critical mathematical property of this equation is the quadratic exponent on velocity ( v 2 v^2 v 2 ) :
Kinetic energy is linearly proportional to mass ( m m m ) . If mass doubles, kinetic energy doubles ( 2 × 2\times 2 × ).
Kinetic energy is proportional to the square of velocity ( v 2 v^2 v 2 ) :
Doubling speed ( 2 v 2v 2 v ) increases kinetic energy by ( 2 ) 2 = 4 × (2)^2 = \mathbf{4\times} ( 2 ) 2 = 4 × ( 400 % 400\% 400% of original energy).
Tripling speed ( 3 v 3v 3 v ) increases kinetic energy by ( 3 ) 2 = 9 × (3)^2 = \mathbf{9\times} ( 3 ) 2 = 9 × ( 900 % 900\% 900% of original energy).
Quadrupling speed ( 4 v 4v 4 v ) increases kinetic energy by ( 4 ) 2 = 16 × (4)^2 = \mathbf{16\times} ( 4 ) 2 = 16 × ( 1 , 600 % 1,600\% 1 , 600% of original energy).
In practical aviation risk management, velocity is vastly more hazardous than aircraft mass. An operator cannot easily halve the mass of a drone carrying a heavy sensor, but reducing the aircraft's velocity by half immediately cuts its destructive impact energy by 75 % 75\% 75% .
Concrete Numerical Analysis: Class C2 UAS at Operational Airspeeds
To understand why European regulations treat low-speed mode as a vital safety mitigation, let us analyze a realistic professional Class C2 enterprise multirotor with a gross takeoff mass of m = 3.5 kg m = 3.5\text{ kg} m = 3.5 kg ( 3 , 500 g 3,500\text{ g} 3 , 500 g ) across four distinct operational flight regimes:
1. High-Speed Transit / Sport Mode ( v = 19 m/s = 68.4 km/h v = 19\text{ m/s} = 68.4\text{ km/h} v = 19 m/s = 68.4 km/h )
At maximum level airspeed:
E k = 1 2 × 3.5 kg × ( 19 m/s ) 2 = 0.5 × 3.5 × 361 = 631.75 Joules E_k = \frac{1}{2} \times 3.5\text{ kg} \times (19\text{ m/s})^2 = 0.5 \times 3.5 \times 361 = \mathbf{631.75\text{ Joules}} E k = 2 1 × 3.5 kg × ( 19 m/s ) 2 = 0.5 × 3.5 × 361 = 631.75 Joules
2. Standard Operational Cruising Speed ( v = 15 m/s = 54.0 km/h v = 15\text{ m/s} = 54.0\text{ km/h} v = 15 m/s = 54.0 km/h )
In typical standard cruising mode without speed restrictions:
E k = 1 2 × 3.5 kg × ( 15 m/s ) 2 = 0.5 × 3.5 × 225 = 393.75 Joules E_k = \frac{1}{2} \times 3.5\text{ kg} \times (15\text{ m/s})^2 = 0.5 \times 3.5 \times 225 = \mathbf{393.75\text{ Joules}} E k = 2 1 × 3.5 kg × ( 15 m/s ) 2 = 0.5 × 3.5 × 225 = 393.75 Joules
3. Moderate Surveying / Inspection Speed ( v = 8 m/s = 28.8 km/h v = 8\text{ m/s} = 28.8\text{ km/h} v = 8 m/s = 28.8 km/h )
During typical photogrammetry or infrastructure mapping:
E k = 1 2 × 3.5 kg × ( 8 m/s ) 2 = 0.5 × 3.5 × 64 = 112.00 Joules E_k = \frac{1}{2} \times 3.5\text{ kg} \times (8\text{ m/s})^2 = 0.5 \times 3.5 \times 64 = \mathbf{112.00\text{ Joules}} E k = 2 1 × 3.5 kg × ( 8 m/s ) 2 = 0.5 × 3.5 × 64 = 112.00 Joules
4. Active Low-Speed Mode ( v = 3 m/s = 10.8 km/h v = 3\text{ m/s} = 10.8\text{ km/h} v = 3 m/s = 10.8 km/h )
Under Regulation (EU) 2019/945, Class C2 multirotors feature a pilot-selectable low-speed mode that limits ground speed to 3 m/s 3\text{ m/s} 3 m/s :
E k = 1 2 × 3.5 kg × ( 3 m/s ) 2 = 0.5 × 3.5 × 9 = 15.75 Joules E_k = \frac{1}{2} \times 3.5\text{ kg} \times (3\text{ m/s})^2 = 0.5 \times 3.5 \times 9 = \mathbf{15.75\text{ Joules}} E k = 2 1 × 3.5 kg × ( 3 m/s ) 2 = 0.5 × 3.5 × 9 = 15.75 Joules
The Mathematical Energy Reduction: 96%
Comparing the kinetic energy of standard cruise flight ( 15 m/s 15\text{ m/s} 15 m/s ) to active low-speed mode ( 3 m/s 3\text{ m/s} 3 m/s ) reveals a staggering differential:
Δ E k = E c r u i s e − E l o w − s p e e d = 393.75 J − 15.75 J = 378.00 Joules \Delta E_k = E_{cruise} - E_{low-speed} = 393.75\text{ J} - 15.75\text{ J} = 378.00\text{ Joules} Δ E k = E cr u i se − E l o w − s p ee d = 393.75 J − 15.75 J = 378.00 Joules
Calculating the percentage reduction in kinetic energy:
Percentage Reduction = ( 393.75 − 15.75 393.75 ) × 100 % = ( 378.00 393.75 ) × 100 % = 96.0 % \text{Percentage Reduction} = \left( \frac{393.75 - 15.75}{393.75} \right) \times 100\% = \left( \frac{378.00}{393.75} \right) \times 100\% = \mathbf{96.0\%} Percentage Reduction = ( 393.75 393.75 − 15.75 ) × 100% = ( 393.75 378.00 ) × 100% = 96.0%
Important
The Core Numerical Reality: Engaging low-speed mode ( 3 m/s 3\text{ m/s} 3 m/s ) removes 96.0 % 96.0\% 96.0% of the aircraft's horizontal kinetic energy : from 393.75 J 393.75\text{ J} 393.75 J to 15.75 J 15.75\text{ J} 15.75 J . That is about one-fifth of the 80 J 80\text{ J} 80 J head-impact reference used for Class C1, whereas cruise is about five times above it. This energy reduction, together with more reaction time and very short stopping distances, is the logic behind the 5 m minimum. The regulation adds its own conditions: the pilot must also evaluate the weather, the aircraft's performance and the segregation of the overflown area.
Operational Mode Velocity (m/s) Velocity (km/h) Kinetic Energy (3.5 kg UAS) Relative Energy vs. Cruise Energy Reduction vs. Cruise
Max Transit / Sport 19 m/s 19\text{ m/s} 19 m/s 68.4 km/h 68.4\text{ km/h} 68.4 km/h 631.75 J 631.75\text{ J} 631.75 J 160.4 % 160.4\% 160.4% − 60.4 % -60.4\% − 60.4% (Surplus hazard)
Standard Cruise 15 m/s 15\text{ m/s} 15 m/s 54.0 km/h 54.0\text{ km/h} 54.0 km/h 393.75 J 393.75\text{ J} 393.75 J 100.0 % 100.0\% 100.0% Baseline ( 0 % 0\% 0% )
Moderate Survey 8 m/s 8\text{ m/s} 8 m/s 28.8 km/h 28.8\text{ km/h} 28.8 km/h 112.00 J 112.00\text{ J} 112.00 J 28.4 % 28.4\% 28.4% 71.6 % 71.6\% 71.6% reduction
Intermediate Slow 5 m/s 5\text{ m/s} 5 m/s 18.0 km/h 18.0\text{ km/h} 18.0 km/h 43.75 J 43.75\text{ J} 43.75 J 11.1 % 11.1\% 11.1% 88.9 % 88.9\% 88.9% reduction
Class C2 Low-Speed 3 m/s \mathbf{3\text{ m/s}} 3 m/s 10.8 km/h \mathbf{10.8\text{ km/h}} 10.8 km/h 15.75 J \mathbf{15.75\text{ J}} 15.75 J 4.0 % \mathbf{4.0\%} 4.0% 96.0 % reduction \mathbf{96.0\%\text{ reduction}} 96.0% reduction
Vertical Free Fall & Terminal Velocity Dynamics
Horizontal kinetic energy represents only one dimension of ground risk. If an unmanned aircraft experiences a total propulsion failure, catastrophic battery disconnect, or structural motor arm failure at the maximum legal Open Category altitude ceiling of 120 meters 120\text{ meters} 120 meters above ground level, it enters a ballistic vertical free fall.
Theoretical Vacuum Fall vs. Aerodynamic Retardation
In a hypothetical physics vacuum without atmospheric friction, an object falling from height h = 120 m h = 120\text{ m} h = 120 m accelerates under gravity ( g = 9.81 m/s 2 g = 9.81\text{ m/s}^2 g = 9.81 m/s 2 ):
v = 2 g h = 2 × 9.81 × 120 = 2 , 354.4 ≈ 48.52 m/s ( 174.7 km/h ) v = \sqrt{2 g h} = \sqrt{2 \times 9.81 \times 120} = \sqrt{2,354.4} \approx 48.52\text{ m/s} \quad (174.7\text{ km/h}) v = 2 g h = 2 × 9.81 × 120 = 2 , 354.4 ≈ 48.52 m/s ( 174.7 km/h )
In a vacuum, the resulting ground impact energy for our 3.5 kg 3.5\text{ kg} 3.5 kg multirotor would be:
E k = 1 2 × 3.5 × ( 48.52 ) 2 ≈ 4 , 120 Joules E_k = \frac{1}{2} \times 3.5 \times (48.52)^2 \approx \mathbf{4,120\text{ Joules}} E k = 2 1 × 3.5 × ( 48.52 ) 2 ≈ 4 , 120 Joules
Real-World Aerodynamic Terminal Velocity ( v t v_t v t )
In Earth's atmosphere, the falling airframe encounters opposing aerodynamic drag ( F D = 1 2 ρ v 2 C D A F_D = \frac{1}{2} \rho v^2 C_D A F D = 2 1 ρ v 2 C D A ). As falling speed increases, drag increases quadratically until drag exactly equals the aircraft's weight ( F D = m g F_D = m g F D = m g ). At this equilibrium point, acceleration drops to zero, and the aircraft falls at a constant terminal velocity ( v t v_t v t ) :
m g = 1 2 ρ v t 2 C D A ⟹ v t = 2 m g ρ C D A m g = \frac{1}{2} \rho v_t^2 C_D A \implies v_t = \sqrt{\frac{2 m g}{\rho C_D A}} m g = 2 1 ρ v t 2 C D A ⟹ v t = ρ C D A 2 m g
For a typical 3.5 kg 3.5\text{ kg} 3.5 kg multirotor tumbling out of control in air with sea-level density ρ = 1.225 kg/m 3 \rho = 1.225\text{ kg/m}^3 ρ = 1.225 kg/m 3 :
- Tumbling drag coefficient: C D ≈ 1.1 C_D \approx 1.1 C D ≈ 1.1
- Average projected cross-sectional area: A ≈ 0.08 m 2 A \approx 0.08\text{ m}^2 A ≈ 0.08 m 2
Calculating terminal velocity:
v t = 2 × 3.5 × 9.81 1.225 × 1.1 × 0.08 = 68.67 0.1078 = 636.9 ≈ 25.24 m/s ( 90.9 km/h ) v_t = \sqrt{\frac{2 \times 3.5 \times 9.81}{1.225 \times 1.1 \times 0.08}} = \sqrt{\frac{68.67}{0.1078}} = \sqrt{636.9} \approx \mathbf{25.24\text{ m/s}} \quad (90.9\text{ km/h}) v t = 1.225 × 1.1 × 0.08 2 × 3.5 × 9.81 = 0.1078 68.67 = 636.9 ≈ 25.24 m/s ( 90.9 km/h )
Vertical Impact Energy
At a terminal velocity of 25.24 m/s 25.24\text{ m/s} 25.24 m/s , the vertical kinetic energy transferred upon ground impact is:
E k = 1 2 × 3.5 kg × ( 25.24 m/s ) 2 = 0.5 × 3.5 × 637.06 ≈ 1 , 115 Joules E_k = \frac{1}{2} \times 3.5\text{ kg} \times (25.24\text{ m/s})^2 = 0.5 \times 3.5 \times 637.06 \approx \mathbf{1,115\text{ Joules}} E k = 2 1 × 3.5 kg × ( 25.24 m/s ) 2 = 0.5 × 3.5 × 637.06 ≈ 1 , 115 Joules
Warning
The Lethality of Unmitigated Fall Energy: Even with aerodynamic drag reducing vertical velocity by nearly half, a falling 3.5 kg drone strikes the ground with over 1 , 100 Joules 1,100\text{ Joules} 1 , 100 Joules of energy! This is roughly equivalent to a 20 kg cinderblock dropped directly onto a person's head from a second-story building. This extreme energy explains why overflight of uninvolved persons is prohibited in subcategory A2 , regardless of flight mode. It also shows that low-speed mode does nothing to reduce fall energy: the 5 m minimum only makes sense close to the ground, which is why the AMC adds the 1:1 height-to-distance reference.
Impact Energy Reference Points
There is no single EU injury threshold that A2 pilots must apply. Researchers and regulators use different injury models, and how badly a person is hurt depends on far more than energy: where the drone hits, how stiff and sharp it is, how it deforms, and whether the propellers are turning. The EU drone rules do, however, use 80 J as a reference point twice:
Class C1 (Part 2 of Regulation (EU) 2019/945): the UA must be designed so that, in an impact at terminal velocity with a human head, it transmits less than 80 J; the alternative is an MTOM below 900 g.
Operator registration (Article 14(5) of Regulation (EU) 2019/947): registration is required for open-category UA of 250 g or more, or UA that could transfer more than 80 J of kinetic energy to a person on impact.
Loading diagram...
1. Energy Is Only Part of the Story
Contact area and sharpness: The same energy spread over a soft, deformable body is far less harmful than energy concentrated on a hard edge such as a motor arm, camera housing or landing-gear tip. That is why Class C2 requires designs that avoid sharp edges where technically possible.
Deformation: Structures that crush or flex absorb energy during the impact, so less of it reaches the person.
Where the person is hit: Head and neck impacts are the most dangerous, which is why most drone injury research focuses on head impacts.
2. Propeller Laceration Hazards
Propeller tips on a typical C2 multirotor turn at several thousand RPM, giving tip speeds that can approach or exceed 100 m/s 100\text{ m/s} 100 m/s ( 360 km/h 360\text{ km/h} 360 km/h ).
Contact with a spinning propeller can cause deep cuts and serious eye injuries even when the aircraft itself is barely moving.
Part 3 of Regulation (EU) 2019/945 therefore requires a C2 aircraft with propellers to be designed to limit the injury its propeller blades can inflict . Optional propeller guards add further protection but also add mass and drag.
The Engineering & Regulatory Rationale for the 3 m/s Low-Speed Mode
Why does Regulation (EU) 2019/947 permit remote pilots holding an A2 Certificate of Competency to reduce their horizontal distance to uninvolved persons from 30 meters down to 5 meters only when low-speed mode is engaged? The regulation does not state its reasoning, but three physical factors explain the logic: [CRUISING SPEED: 15 m/s | 30 m SEPARATION] [LOW-SPEED MODE: 3 m/s | 5 m SEPARATION]
- Drone Drone
- | |
- | Airspeed: 15 m/s | Airspeed: 3 m/s
- | Ek = 393.8 J | Ek = 15.8 J (96% drop)
- v v
- [ 30m Buffer ] [ 5m Buffer ]
- | |
- | Time to impact: 2.0 s | Time to impact: 1.67 s
- v v
- Bystander Bystander
- (Sufficient evasion time) (Equivalent evasion time!)
- Pillar 1: Much Lower Impact Energy
As proven mathematically, engaging low-speed mode slashes kinetic energy by 96 % 96\% 96% (from 393.75 J 393.75\text{ J} 393.75 J to 15.75 J 15.75\text{ J} 15.75 J ). At 15.75 J 15.75\text{ J} 15.75 J , a horizontal collision delivers about one-fifth of the 80 J 80\text{ J} 80 J head-impact reference used for Class C1 drones. The severity of a blunt impact is therefore greatly reduced, although a spinning propeller can still injure.
Pillar 2: Human Reaction Time and Evasion Window Parity
A critical factor in preventing collisions is the time available for both the remote pilot and an uninvolved bystander to perceive an impending collision and take evasive action:
Standard Cruise at 30 m Distance: At v = 15 m/s v = 15\text{ m/s} v = 15 m/s , the time required for the drone to cross the 30-meter buffer is:
t = d v = 30 m 15 m/s = 2.0 seconds t = \frac{d}{v} = \frac{30\text{ m}}{15\text{ m/s}} = \mathbf{2.0\text{ seconds}} t = v d = 15 m/s 30 m = 2.0 seconds
Low-Speed Mode at 5 m Distance: At v = 3 m/s v = 3\text{ m/s} v = 3 m/s , the time required for the drone to cross the 5-meter buffer is:
t = d v = 5 m 3 m/s = 1.67 seconds t = \frac{d}{v} = \frac{5\text{ m}}{3\text{ m/s}} = \mathbf{1.67\text{ seconds}} t = v d = 3 m/s 5 m = 1.67 seconds
Remarkably, the reaction window at 5 meters 5\text{ meters} 5 meters under low-speed mode ( 1.67 s 1.67\text{ s} 1.67 s ) is virtually identical to the reaction window at 30 meters 30\text{ meters} 30 meters in cruising mode ( 2.0 s 2.0\text{ s} 2.0 s )! A bystander hearing the approaching drone or a pilot releasing the sticks has sufficient time to react and evade contact.
Pillar 3: Deceleration and Braking Distance Physics
When a remote pilot releases the control sticks to command an emergency stop, the aircraft must decelerate to rest. The stopping distance ( d s t o p d_{stop} d s t o p ) is governed by the work-energy theorem:
d s t o p = v 2 2 a d e c e l d_{stop} = \frac{v^2}{2 a_{decel}} d s t o p = 2 a d ece l v 2
Assuming a maximum aggressive multirotor braking deceleration of a d e c e l = 5.0 m/s 2 a_{decel} = 5.0\text{ m/s}^2 a d ece l = 5.0 m/s 2 :
At cruising speed ( 15 m/s 15\text{ m/s} 15 m/s ):
d s t o p = ( 15 ) 2 2 × 5.0 = 225 10 = 22.5 meters d_{stop} = \frac{(15)^2}{2 \times 5.0} = \frac{225}{10} = \mathbf{22.5\text{ meters}} d s t o p = 2 × 5.0 ( 15 ) 2 = 10 225 = 22.5 meters
The drone requires 22.5 meters 22.5\text{ meters} 22.5 meters just to come to a halt! A 30 m 30\text{ m} 30 m buffer provides only a narrow 7.5 m 7.5\text{ m} 7.5 m safety cushion beyond the stopping distance.
In low-speed mode ( 3 m/s 3\text{ m/s} 3 m/s ):
d s t o p = ( 3 ) 2 2 × 5.0 = 9 10 = 0.9 meters d_{stop} = \frac{(3)^2}{2 \times 5.0} = \frac{9}{10} = \mathbf{0.9\text{ meters}} d s t o p = 2 × 5.0 ( 3 ) 2 = 10 9 = 0.9 meters
In low-speed mode, releasing the sticks brings the aircraft to a complete, stationary hover in less than one meter ( 0.9 m 0.9\text{ m} 0.9 m ) ! Within a 5 m 5\text{ m} 5 m buffer, the aircraft can stop well before reaching the bystander.
Real stops also include the pilot's reaction time. Add a 1-second reaction before braking starts: at 15 m/s 15\text{ m/s} 15 m/s the aircraft travels another 15 m 15\text{ m} 15 m , for a total of about 37.5 m 37.5\text{ m} 37.5 m , which is more than the 30 m minimum. At 3 m/s 3\text{ m/s} 3 m/s it travels another 3 m 3\text{ m} 3 m , for a total of about 3.9 m 3.9\text{ m} 3.9 m , still inside 5 m. This is one reason to treat 30 m as a floor, not a target, when flying at cruise speed.
Operational Safety Metric Standard Flight Mode Active Low-Speed Mode Safety Benefit of Low-Speed Mode
Maximum Horizontal Airspeed 15 m/s 15\text{ m/s} 15 m/s ( 54 km/h 54\text{ km/h} 54 km/h ) 3 m/s 3\text{ m/s} 3 m/s ( 10.8 km/h 10.8\text{ km/h} 10.8 km/h ) 80 % 80\% 80% velocity reduction
Horizontal Kinetic Energy (3.5 kg) 393.75 Joules 393.75\text{ Joules} 393.75 Joules 15.75 Joules 15.75\text{ Joules} 15.75 Joules 96.0 % 96.0\% 96.0% energy reduction
Minimum Separation from Bystanders 30 meters 30\text{ meters} 30 meters 5 meters 5\text{ meters} 5 meters Enables close inspection work
Time to Cross Separation Buffer 2.0 seconds 2.0\text{ seconds} 2.0 seconds 1.67 seconds 1.67\text{ seconds} 1.67 seconds Preserves human evasion window
Theoretical Braking Distance ( 5 m/s 2 5\text{ m/s}^2 5 m/s 2 ) 22.5 meters 22.5\text{ meters} 22.5 meters 0.9 meters 0.9\text{ meters} 0.9 meters Stops in < 1 m < 1\text{ m} < 1 m ( 96 % 96\% 96% shorter!)
Energy vs. 80 J Reference About 5 × 5\times 5 × above About 5 × 5\times 5 × below Far lower blunt-impact severity