Study guide

2.3 Areas and Volumes of Shapes

EASA Part-66 Module 01 — Mathematics Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Basic Arithmetic

1.1 Arithmetical Terms, Signs, Fractions, and Decimals 1.2 Ratios, Proportions, and Percentages 1.3 Weights, Measures, and Conversion Factors

2 Chapter 2: Applied Arithmetic & Geometry

2.1 Averages 2.2 Squares, Cubes, and Roots 2.3 Areas and Volumes of Shapes

3 Chapter 3: Simple Expressions & Equations

3.1 Evaluating Algebraic Expressions & Brackets 3.3 Linear & Simultaneous Equations

4 Chapter 5: Geometry & Trigonometry

5.1 Geometrical Constructions 5.2 Graphs of Equations and Functions 5.3 Trigonometry

2.3 Areas and Volumes of Shapes

Key Takeaways Explain This Topic AI

2D area formulas for triangles, circles, and trapezoids are vital for sheet metal repair, cross-sections, and aerodynamic surfaces.

3D volume formulas for cylinders, spheres, and cones are used to determine engine displacement, accumulator capacity, and cabin volumes.

Engine displacement is the product of single-cylinder swept volume and the number of cylinders, while the compression ratio compares total volume to clearance volume.

Aspect ratio is calculated as wingspan squared divided by wing area, expressing the structural and aerodynamic proportions of the wing.

Last updated: July 2026

2.3 Areas and Volumes of Shapes

Geometric calculations are central to structural repairs, engine overhaul, and fluid capacity verification. In aviation maintenance, you must work with both 2D shapes (areas) and 3D shapes (volumes and surface areas). This section reviews fundamental formulas and demonstrates their application in calculating aircraft cabin volume, wing parameters, and piston engine dynamics.

2D Geometric Formulas (Areas)

To calculate sheet metal requirements for structural repairs, or aerodynamic surface areas, the following formulas are standard:

Triangle : A = 1 2 b h A = \frac{1}{2} b h A = 2 1 ​ bh

Where b b b is the base and h h h is the height. Used for calculating the area of structural gussets or tapered brackets.

Rectangle : A = l w A = l w A = lw

Where l l l is the length and w w w is the width. Used for access panels, cargo floor layout calculations, and floor loading limits.

Circle : A = π r 2 = π d 2 4 A = \pi r^2 = \frac{\pi d^2}{4} A = π r 2 = 4 π d 2 ​

Where r r r is the radius and d d d is the diameter. Used for calculating piston face areas, cable cross-sections, and pneumatic duct areas.

Trapezoid : A = a + b 2 h A = \frac{a+b}{2} h A = 2 a + b ​ h

Where a a a and b b b are the lengths of the parallel sides and h h h is the height between them. Primarily used for wing planform area calculations.

3D Geometric Formulas (Volumes and Surface Areas)

For fluid storage and cabin space calculations, the following formulas apply:

Cylinder : Volume: V = π r 2 h = π d 2 4 h \text{Volume: } V = \pi r^2 h = \frac{\pi d^2}{4} h Volume: V = π r 2 h = 4 π d 2 ​ h Surface Area: A = 2 π r 2 + 2 π r h \text{Surface Area: } A = 2\pi r^2 + 2\pi r h Surface Area: A = 2 π r 2 + 2 π r h

Where r r r is the radius, d d d is the diameter, and h h h is the height (or length). Standard for hydraulic cylinders, engine cylinders, and fuel tank volumes.

Sphere : Volume: V = 4 3 π r 3 \text{Volume: } V = \frac{4}{3}\pi r^3 Volume: V = 3 4 ​ π r 3 Surface Area: A = 4 π r 2 \text{Surface Area: } A = 4\pi r^2 Surface Area: A = 4 π r 2

Where r r r is the radius. Used for gaseous oxygen cylinders and spherical hydraulic accumulators.

Cone : Volume: V = 1 3 π r 2 h \text{Volume: } V = \frac{1}{3}\pi r^2 h Volume: V = 3 1 ​ π r 2 h

Where r r r is the radius of the base and h h h is the height. Used to approximate nose radomes and engine exhaust tail cones.

Aviation Application: Engine Displacement and Compression Ratio

In aircraft piston engines (such as Lycoming and Continental engines), power output is directly related to the engine's displacement (total swept volume).

Key terminology:

Bore ( d d d ) : The inner diameter of the engine cylinder.

Stroke ( L L L ) : The distance the piston travels from Bottom Dead Center (BDC) to Top Dead Center (TDC).

Swept Volume ( V s V_s V s ​ ) : The volume the piston sweeps through during one stroke: V s = π d 2 4 × L V_s = \frac{\pi d^2}{4} \times L V s ​ = 4 π d 2 ​ × L

Clearance Volume ( V c V_c V c ​ ) : The volume of the combustion chamber remaining when the piston is at the top of its stroke (TDC).

Compression Ratio (CR) : The ratio of the maximum cylinder volume (at BDC) to the minimum cylinder volume (at TDC): CR = V s + V c V c \text{CR} = \frac{V_s + V_c}{V_c} CR = V c ​ V s ​ + V c ​ ​

Worked Example: Engine Geometry Calculations

A technician is performing an overhaul on a 4-cylinder aircraft engine. The cylinder measurements are a bore of 5.0 inches 5.0\text{ inches} 5.0 inches and a stroke of 4.0 inches 4.0\text{ inches} 4.0 inches . The cylinder clearance volume is measured as 14.5 cubic inches 14.5\text{ cubic inches} 14.5 cubic inches .

Calculate the Swept Volume of one cylinder : V s = π × 5.0 2 4 × 4.0 = π × 25 4 × 4 = 25 π ≈ 78.54 cubic inches V_s = \frac{\pi \times 5.0^2}{4} \times 4.0 = \frac{\pi \times 25}{4} \times 4 = 25\pi \approx 78.54\text{ cubic inches} V s ​ = 4 π × 5. 0 2 ​ × 4.0 = 4 π × 25 ​ × 4 = 25 π ≈ 78.54 cubic inches

Calculate the Total Engine Displacement : Total Displacement = V s × number of cylinders = 78.54 in 3 × 4 ≈ 314.16 cubic inches \text{Total Displacement} = V_s \times \text{number of cylinders} = 78.54\text{ in}^3 \times 4 \approx 314.16\text{ cubic inches} Total Displacement = V s ​ × number of cylinders = 78.54 in 3 × 4 ≈ 314.16 cubic inches

(This engine would be classified in the 315 cubic inch class, e.g., Lycoming O-320 variant).

Calculate the Compression Ratio (CR) : CR = V s + V c V c = 78.54 + 14.5 14.5 = 93.04 14.5 ≈ 6.42 : 1 \text{CR} = \frac{V_s + V_c}{V_c} = \frac{78.54 + 14.5}{14.5} = \frac{93.04}{14.5} \approx 6.42:1 CR = V c ​ V s ​ + V c ​ ​ = 14.5 78.54 + 14.5 ​ = 14.5 93.04 ​ ≈ 6.42 : 1

Aviation Application: Wing Area and Aspect Ratio

Aerodynamic lift is directly proportional to wing area ( S S S ) . For a tapered wing, the wing can be mathematically modeled as a trapezoid. The Aspect Ratio ( A R AR A R ) of a wing is a critical indicator of aerodynamic efficiency (high aspect ratio wings, like gliders, have lower induced drag).

The formulas are: Trapezoidal Wing Area: S = c r o o t + c t i p 2 × b \text{Trapezoidal Wing Area: } S = \frac{c_{root} + c_{tip}}{2} \times b Trapezoidal Wing Area: S = 2 c roo t ​ + c t i p ​ ​ × b Aspect Ratio: A R = b 2 S \text{Aspect Ratio: } AR = \frac{b^2}{S} Aspect Ratio: A R = S b 2 ​

Where:

b b b is the wingspan (tip-to-tip distance).

c r o o t c_{root} c roo t ​ is the wing chord at the root (fuselage attachment).

c t i p c_{tip} c t i p ​ is the wing chord at the tip.

Worked Example: Wing Aerodynamic Geometry

Calculate the aspect ratio of a glider wing that has a wingspan of 16 meters 16\text{ meters} 16 meters , a root chord of 1.2 meters 1.2\text{ meters} 1.2 meters , and a tip chord of 0.8 meters 0.8\text{ meters} 0.8 meters .

Calculate the Wing Area ( S S S ) : S = 1.2 + 0.8 2 × 16 = 2.0 2 × 16 = 1.0 × 16 = 16 square meters S = \frac{1.2 + 0.8}{2} \times 16 = \frac{2.0}{2} \times 16 = 1.0 \times 16 = 16\text{ square meters} S = 2 1.2 + 0.8 ​ × 16 = 2 2.0 ​ × 16 = 1.0 × 16 = 16 square meters

Calculate the Aspect Ratio ( A R AR A R ) : A R = b 2 S = 16 2 16 = 256 16 = 16.0 AR = \frac{b^2}{S} = \frac{16^2}{16} = \frac{256}{16} = 16.0 A R = S b 2 ​ = 16 1 6 2 ​ = 16 256 ​ = 16.0

The wing has an aspect ratio of 16.0 16.0 16.0 , which is typical for high-efficiency gliders or sailplanes.

Aviation Application: Fuel Tank Capacity and Cabin Volume

Aircraft cabins must be pressurized at high altitudes, and the cabin air conditioning system must circulate air based on total cabin volume .

Cabin Volume : By modeling the cabin fuselage as a cylinder of length L L L and diameter D D D , we can estimate the volume: V c a b i n = π D 2 4 × L V_{cabin} = \frac{\pi D^2}{4} \times L V c abin ​ = 4 π D 2 ​ × L

Fuel Volume and Mass : Fuel tanks are often integrated into wing structures. If a tank's volume is calculated in cubic units, it must be converted to liquid capacity (e.g., liters or gallons) to determine the weight of the fuel load.

Conversion : 1 cubic meter = 1000 liters 1\text{ cubic meter} = 1000\text{ liters} 1 cubic meter = 1000 liters .

Fuel Weight : Mass = Volume (L) × Density (kg/L) \text{Mass} = \text{Volume (L)} \times \text{Density (kg/L)} Mass = Volume (L) × Density (kg/L) .

Worked Example: Wing Tank Capacity

A rectangular-profile auxiliary fuel tank in a cargo hold measures 1.5 meters 1.5\text{ meters} 1.5 meters long, 1.2 meters 1.2\text{ meters} 1.2 meters wide, and 0.8 meters 0.8\text{ meters} 0.8 meters deep. If the tank is filled with Jet A-1 at a density of 0.80 kg/L 0.80\text{ kg/L} 0.80 kg/L , what is the weight of the fuel in kilograms?

Calculate the Volume in cubic meters : V = 1.5 m × 1.2 m × 0.8 m = 1.44 cubic meters V = 1.5\text{ m} \times 1.2\text{ m} \times 0.8\text{ m} = 1.44\text{ cubic meters} V = 1.5 m × 1.2 m × 0.8 m = 1.44 cubic meters

Convert to Liters : V = 1.44 m 3 × 1000 L/m 3 = 1440 liters V = 1.44\text{ m}^3 \times 1000\text{ L/m}^3 = 1440\text{ liters} V = 1.44 m 3 × 1000 L/m 3 = 1440 liters

Calculate the Fuel Weight : Mass = 1440 L × 0.80 kg/L = 1152 kg \text{Mass} = 1440\text{ L} \times 0.80\text{ kg/L} = 1152\text{ kg} Mass = 1440 L × 0.80 kg/L = 1152 kg

Understanding these spatial and volumetric calculations ensures that aircraft do not exceed structural gross weights while maximizing fuel range.