Study guide

7.3 Servo Dynamics, Damping, Motors & Hunting Prevention

EASA Part-66 Module 04 — Electronic Fundamentals Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Semiconductor Physics & Diode Fundamentals

1.1 Semiconductor Theory, PN Junction & Conduction 1.2 Power Rectification & Filtering Circuits 1.3 Diode Wave-Shaping & Voltage Multipliers

2 Chapter 2: Special-Purpose Diodes & Semiconductor Testing

2.1 Voltage Regulation & Zener Diodes 2.2 Optoelectronic, Fast-Switching & Power Diodes 2.3 Diode Testing, Failure Modes & Aircraft Applications

3 Chapter 3: Transistor Principles, Configurations & Biasing

3.1 BJT Structure, Operation & Current Relationships 3.2 Transistor Circuit Configurations 3.3 Transistor Biasing, Thermal Stability & Testing

4 Chapter 4: Transistor Amplifiers, FETs & Oscillators

4.1 Amplifier Operating Classes & Push-Pull Systems 4.2 Multistage Coupling & Negative Feedback 4.3 Field Effect Transistors & Darlington Pairs 4.4 Oscillators & Multivibrators

5 Chapter 5: Operational Amplifiers & Linear Integrated Circuits

5.1 Op-Amp Fundamentals, Characteristics & Virtual Ground 5.2 Op-Amp Linear Circuits & Calculations 5.3 Active Wave-Shaping, Comparators & Digital Logic Basics

6 Chapter 6: Printed Circuit Boards & Electrostatic Discharge Protection

6.1 PCB Design, Layered Construction & Manufacturing 6.2 PCB Inspection, Soldering Defects & Electrostatic Discharge (ESD) Control

7 Chapter 7: Servomechanism Principles, Transducers & Control

7.1 Open-Loop and Closed-Loop Control Architecture 7.2 Servomechanism Transducers (Potentiometers, LVDTs & RVDTs) 7.3 Servo Dynamics, Damping, Motors & Hunting Prevention

8 Chapter 8: Synchro Systems, Resolvers & Fault Diagnosis

8.1 Torque Synchro Systems (TX, TR & Differentials) 8.2 Control Synchros, Resolvers & Inductive Sensors 8.3 Synchro Troubleshooting, Wiring Faults & Maintenance

7.3 Servo Dynamics, Damping, Motors & Hunting Prevention

Key Takeaways Explain This Topic AI

Aircraft two-phase AC induction servomotors utilize orthogonal stator windings (Reference and Control) spaced 90° apart; varying the control voltage amplitude modulates torque, while a 180° error phase inversion reverses the stator magnetic field rotation and motor direction.

Servomotor rotors feature high electrical resistance (R_2 >> X_2), producing a linear, descending speed-torque curve with peak starting torque at stall (s = 1) and completely preventing 'single-phasing' (running on reference phase alone when control signal drops to zero).

Deadband is the threshold band of error around null where actuator stiction, friction, and gear backlash prevent movement; excessive deadband causes poor positioning accuracy, while zero deadband can trigger limit-cycle oscillation.

Velocity (rate) feedback from a shaft-mounted tachogenerator injects a synthetic viscous damping signal (e_t = K_t · dθ_o/dt) into the comparator that opposes rapid motion and eliminates overshoot without dissipating motor power at steady-state null.

Hunting is continuous, sustained limit-cycle oscillation of the load about null caused by excessive loop gain, excessive phase lag, mechanical backlash, or low damping; it is cured by tuning gain, increasing rate feedback, adding phase-lead networks, and using spring-loaded split gears.

Last updated: September 2026

7.3 Servo Dynamics, Damping, Motors & Hunting Prevention

In airborne servomechanisms, achieving rapid command response while maintaining absolute mechanical stability is the central engineering challenge. An aircraft flight control actuator must rapidly deflect an aerodynamic surface to stabilize the aircraft in severe turbulence, yet it must settle cleanly onto the demanded null position without overshooting, oscillating, or entering self-destructive limit cycles. Under EASA Part-66 Module 04, certifying maintenance personnel must understand the electro-mechanical construction and phase-reversal dynamics of two-phase AC induction servomotors, the physical causes and trade-offs of deadband, the mathematical classification of damping regimes, tachogenerator velocity rate feedback, and the diagnosis and elimination of servomechanism hunting .

Aircraft Actuators: The Two-Phase AC Induction Servomotor

While permanent-magnet brushless DC motors are common in modern avionics, the two-phase AC induction servomotor remains a classic, highly reliable workhorse in 400 Hz 400\text{ Hz} 400 Hz aircraft systems—such as legacy autopilot actuators, flight instrument synchro repeaters, antenna positioners, and fuel valve actuators.

Loading diagram...

1. Stator Construction and Winding Quadrature

The stator of a two-phase servomotor houses two distinct laminated field windings located in slots spaced 90 ∘ 90^\circ 9 0 ∘ mechanically and electrically apart around the stator bore:

Reference Winding: Continuously energized by a fixed, constant AC voltage derived directly from the aircraft instrument bus (typically 115 V RMS 115\text{ V RMS} 115 V RMS or 26 V RMS 26\text{ V RMS} 26 V RMS at 400 Hz 400\text{ Hz} 400 Hz ).

Control Winding: Energized from the output of the servo error amplifier. The voltage applied to this winding is an AC error signal whose amplitude is proportional to the position error magnitude , and whose phase is shifted by 90 ∘ 90^\circ 9 0 ∘ relative to the reference winding.

2. Rotating Magnetic Field & Direction Reversal

To generate motor torque in an induction machine, the stator windings must establish a rotating magnetic field . When two alternating currents of equal frequency but separated by a 90 ∘ 90^\circ 9 0 ∘ phase angle flow through two orthogonal stator coils, their combined vector sum produces a constant-magnitude magnetic flux vector that sweeps smoothly around the stator circumference at synchronous speed ( N s = 120 f / P N_s = 120 f / P N s ​ = 120 f / P ):

Forward Rotation (Clockwise): When the control winding voltage leads the reference winding voltage by 90 ∘ 90^\circ 9 0 ∘ ( + 90 ∘ +90^\circ + 9 0 ∘ electrical phase shift), the resultant stator flux vector rotates clockwise. The rotating field induces eddy currents in the rotor conductors, generating forward torque that drives the rotor clockwise.

Reverse Rotation (Counter-Clockwise): When the polarity of the input error signal reverses (indicating that the actuator has moved to the opposite side of null), the amplifier output undergoes an instantaneous 180 ∘ 180^\circ 18 0 ∘ phase inversion . The control winding voltage now lags the reference winding voltage by 90 ∘ 90^\circ 9 0 ∘ ( − 90 ∘ -90^\circ − 9 0 ∘ electrical phase shift). This phase shift reverses the spatial rotation of the stator magnetic field, instantly producing counter-clockwise rotor torque.

Null State (Zero Torque): When the position error drops to zero, the control winding voltage drops to zero. With only the reference winding energized, the stator produces only a stationary pulsating magnetic field with zero rotational vector, and motor torque drops to zero.

Loading diagram...

3. Rotor Construction & High Rotor Resistance

Servomotor rotors must possess extremely low mechanical inertia to ensure instantaneous acceleration and deceleration. Two construction topologies are utilized:

Low-Inertia Squirrel-Cage Rotor: Skewed aluminum or copper bars cast into small-diameter, elongated laminated iron cores.

Drag-Cup Rotor: A hollow, ultra-thin, non-magnetic cup of aluminum or copper rotating within a narrow air gap between the outer stator and a stationary cylindrical inner iron core. This architecture eliminates all rotor iron rotational inertia, achieving ultra-fast dynamic response.

The Critical Function of High Rotor Resistance ( R 2 R_2 R 2 ​ )

In standard industrial induction motors, rotor electrical resistance is engineered to be as low as possible to maximize efficiency and achieve a stiff speed curve near synchronous speed. However, low rotor resistance causes peak torque to occur at high operating speeds, with very low starting torque at stall ( s = 1 s = 1 s = 1 ). Crucially, if one phase of a standard running induction motor is disconnected, it will continue to spin as a single-phase machine—a catastrophic failure mode known as single-phasing .

In aircraft servomotors, the rotor resistance ( R 2 R_2 R 2 ​ ) is deliberately manufactured to be exceptionally high relative to its inductive reactance ( X 2 X_2 X 2 ​ ):

Linear Speed-Torque Characteristic: High rotor resistance shifts the breakdown slip beyond stall ( s m > 1 s_m > 1 s m ​ > 1 ). The resulting speed-torque curve is strictly linear and descending, exhibiting maximum starting torque at stall ( N = 0 N = 0 N = 0 ) and declining monotonically as speed increases. The negative slope ( ∂ T / ∂ N < 0 \partial T / \partial N < 0 ∂ T / ∂ N < 0 ) introduces powerful internal viscous damping.

Absolute Prevention of Single-Phasing: When the control winding error drops to zero, the motor must stop immediately. In a high-resistance rotor, the negative torque produced by the backward-traveling component of the pulsating single-phase field exceeds the positive torque produced by the forward component at all rotational speeds. Consequently, net torque is strictly negative (braking) whenever control voltage is zero, ensuring the motor immediately halts at null.

Servomechanism Dynamics: Deadband and Thresholds

In physical servomechanisms, static mechanical friction ( stiction ), gear-train backlash, and amplifier input threshold sensitivity create a non-linear region known as the deadband (or dead zone):

Loading diagram...

Definition: The deadband ( 2 ϵ d b 2\epsilon_{db} 2 ϵ d b ​ ) is the narrow band of input error around the null position within which the servomotor produces insufficient torque to overcome static friction and break away, resulting in zero output motion.

The Engineering Trade-Off:

Excessive Deadband: If the deadband is too wide, small command changes or external gust displacements will fail to trigger corrective actuator motion, causing coarse positioning resolution, sluggish response, and significant steady-state tracking error.

Insufficient (Zero) Deadband: If the deadband is narrowed excessively (e.g., by cranking amplifier gain to infinity), infinitesimal noise spikes or minor sensor drift will energize the motor. Because the motor cannot stop precisely at a single mathematical point, it will repeatedly overshoot the vanishingly small deadband, triggering continuous oscillatory cycling.

Transient Response and Damping Regimes

The dynamic motion of a position servomechanism is mathematically governed by a second-order differential equation characterized by an undamped natural frequency ( ω n \omega_n ω n ​ ) and a damping ratio ( ζ \zeta ζ ) : J d 2 θ o d t 2 + B d θ o d t + K θ o = K θ i J \frac{d^2 \theta_o}{dt^2} + B \frac{d\theta_o}{dt} + K \theta_o = K \theta_i J d t 2 d 2 θ o ​ ​ + B d t d θ o ​ ​ + K θ o ​ = K θ i ​

Depending on the value of ζ \zeta ζ , the transient step response falls into one of three classical regimes:

Loading diagram...

Underdamped ( ζ < 1.0 \zeta < 1.0 ζ < 1.0 ): The system responds rapidly to command changes, but kinetic energy stored in the rotating load inertia causes the output to overshoot the commanded null position. The system oscillates (rings) about null before settling. If ζ ≪ 0.7 \zeta \ll 0.7 ζ ≪ 0.7 , oscillations persist for multiple cycles.

Overdamped ( ζ > 1.0 \zeta > 1.0 ζ > 1.0 ): High damping prevents all overshoot, but the actuator approaches null sluggishly. In flight control systems, overdamping is unacceptable because surface deflection lags behind dynamic pilot stick inputs, degrading aircraft controllability.

Critically Damped ( ζ = 1.0 \zeta = 1.0 ζ = 1.0 ): The threshold condition providing the fastest possible rise time to null without any overshoot.

Aerospace Optimal Damping ( ζ ≈ 0.707 \zeta \approx 0.707 ζ ≈ 0.707 ): Commercial and military flight control servomechanisms are universally tuned to a damping ratio of ζ ≈ 0.65 to 0.75 \zeta \approx 0.65\text{ to } 0.75 ζ ≈ 0.65 to 0.75 (nominal ζ = 1 / 2 ≈ 0.707 \zeta = 1/\sqrt{2} \approx 0.707 ζ = 1/ 2 ​ ≈ 0.707 ). This provides the optimal compromise: ultra-fast rise time, minimal overshoot ( < 4.3 % < 4.3\% < 4.3% , well within flight surface tolerances), and an exceptionally short settling time.

Servomechanism Damping Methodologies

To achieve ζ ≈ 0.707 \zeta \approx 0.707 ζ ≈ 0.707 , servomechanisms employ mechanical, magnetic, or synthetic electronic damping:

1. Mechanical Viscous Damping (Fluid Dashpot)

A mechanical piston or rotating vane moving inside a sealed chamber filled with high-viscosity silicone fluid is mechanically coupled to the output shaft. It generates an opposing braking torque strictly proportional to velocity ( T d a m p = B ⋅ ω T_{damp} = B \cdot \omega T d am p ​ = B ⋅ ω ).

Disadvantages: Dissipates physical mechanical energy as heat ( P = B ω 2 P = B \omega^2 P = B ω 2 ), reduces net available motor acceleration torque, degrades system efficiency, and viscosity fluctuates heavily across the aircraft temperature envelope ( − 55 ∘ C -55^\circ\text{C} − 5 5 ∘ C to + 85 ∘ C +85^\circ\text{C} + 8 5 ∘ C ).

2. Eddy-Current Drag-Cup Damping

A thin copper or aluminum drag cup attached to the motor shaft spins through the magnetic field of stationary permanent magnets. Rotation induces eddy currents in the cup, generating an opposing Lorentz magnetic force proportional to shaft speed.

Advantages: Purely non-contacting and frictionless; no fluid to leak.

Disadvantage: Like mechanical dashpots, it absorbs real mechanical motor power during all movements.

3. Velocity (Rate) Feedback via Tachogenerator

The standard damping methodology in high-performance aviation servomechanisms is Velocity (Rate) Feedback using a shaft-mounted tachogenerator :

Loading diagram...

Operating Principle: A small AC or DC generator mechanically coupled directly to the servomotor drive shaft produces an output voltage strictly proportional to rotational velocity: e t = K t d θ o d t e_t = K_t \frac{d\theta_o}{dt} e t ​ = K t ​ d t d θ o ​ ​ where K t K_t K t ​ is the tachometer voltage constant (in V ⋅ s/rad \text{V}\cdot\text{s/rad} V ⋅ s/rad ). This voltage is fed back degeneratively (subtracted) from the position error signal before the error amplifier: V n e t = K p ( θ i − θ o ) − K t d θ o d t V_{net} = K_p (\theta_i - \theta_o) - K_t \frac{d\theta_o}{dt} V n e t ​ = K p ​ ( θ i ​ − θ o ​ ) − K t ​ d t d θ o ​ ​

The Crucial Advantage of Rate Feedback:

During rapid transient motion, the tachometer output ( e t e_t e t ​ ) is large, degenerating the amplifier drive signal. This exerts a powerful electrical braking action as the load approaches null, cleanly preventing overshoot and ringing.

When the actuator reaches the commanded position and stops ( d θ o d t = 0 \frac{d\theta_o}{dt} = 0 d t d θ o ​ ​ = 0 ), the tachometer output drops to precisely zero !

Consequently, rate feedback introduces zero opposing torque and zero power dissipation at rest , preserving 100 % 100\% 100% of the motor's stall torque and holding stiffness at steady-state null.

Servomechanism Hunting: Causes and Elimination

Hunting is defined as a continuous, sustained, cyclic oscillation of the output actuator about the commanded null position without ever settling to rest. In an aircraft elevator or aileron servo, hunting causes high-frequency flight control surface buzzing, severe airframe vibration, premature hydraulic seal failure, rapid gear-tooth fatigue, and passenger discomfort.

Root Causes of Hunting

Excessive Forward Loop Gain ( K a K_a K a ​ ): High amplifier gain stiffens the system against disturbances, but if set too high, the motor over-corrects past null. The resulting reverse error causes another over-correction in the opposite direction, establishing sustained limit-cycle oscillation.

Phase Lag in the Control Loop: Inductance in motor windings, electronic filter delays, and mechanical inertia introduce phase lag. If loop phase lag reaches 180 ∘ 180^\circ 18 0 ∘ while the open-loop gain is ≥ 1.0 \ge 1.0 ≥ 1.0 , negative feedback transforms mathematically into positive feedback (Barkhausen criterion), sustaining continuous oscillations.

Mechanical Backlash in Gear Trains: Backlash is the mechanical clearance or play between mating gear teeth. During direction reversal, the motor rotates across the backlash gap without moving the load or the feedback transducer. This introduces a non-linear phase delay and dead-time, uncoupling the control loop and triggering high-frequency hunting.

Inadequate Loop Damping ( ζ ≪ 0.7 \zeta \ll 0.7 ζ ≪ 0.7 ): Loss or degradation of rate feedback removes the braking mechanism that opposes kinetic energy overshoot.

Techniques for Eliminating Hunting

Loading diagram...

Gain Optimization: Reducing amplifier gain ( K a K_a K a ​ ) restores stability phase margin ( > 45 ∘ > 45^\circ > 4 5 ∘ ), though at the expense of slightly increased steady-state error.

Increasing Tachometer Rate Feedback: Turning up the rate feedback potentiometer increases synthetic viscous damping ( B e f f = B + K m K t B_{eff} = B + K_m K_t B e ff ​ = B + K m ​ K t ​ ), driving ζ \zeta ζ into the stable 0.707 0.707 0.707 regime.

Spring-Loaded Split Gears (Scissor Gears): To eliminate mechanical backlash, precision gearboxes utilize split gears. A split gear consists of two identical gear wheels mounted side-by-side on the same shaft, preloaded by miniature internal springs in opposite rotational directions. The split teeth continuously pinch both faces of the mating pinion teeth, eliminating backlash clearance completely.

Phase-Lead Compensation Networks: Inserting an electronic lead network (an RC high-pass network with transfer function s + z s + p \frac{s + z}{s + p} s + p s + z ​ where z < p z < p z < p ) advances the phase of the forward error signal, providing positive phase lead ( + 30 ∘ to + 60 ∘ +30^\circ\text{ to }+60^\circ + 3 0 ∘ to + 6 0 ∘ ) that counteracts motor inductive and inertia phase lags.

Comparison of Servomechanism Damping Technologies

Damping Technique Physical Mechanism Energy Dissipation Steady-State Power Loss Temperature Sensitivity Aerospace Implementation

Mechanical Dashpot Viscous fluid shearing High (dissipates B ω 2 B\omega^2 B ω 2 ) Continuous drag during motion High (fluid viscosity varies with temp) General aviation legacy trim tabs

Eddy-Current Damper Permanent magnet in drag cup Moderate (Lorentz braking) Continuous drag during motion Low to moderate Synchro receiver dial indicators

Tachometer Rate Feedback Electrical back-EMF feedback Zero mechanical dissipation Zero power loss at rest Negligible Primary flight control servos, FBW

Phase-Lead Network Electronic frequency shaping Zero (purely signal-level) Zero power loss at rest Negligible (drift-free op-amps) Modern digital flight computers (FCC)

Maintenance Safety & Operational Callouts

Note

Spring-Loaded Split Anti-Backlash Gears: During aircraft maintenance gearbox overhauls, technicians must ensure split gears are properly preloaded with the manufacturer's specified tooth offset (typically 1 to 2 teeth of spring deflection) prior to meshing with the drive pinion. Releasing the preload or installing worn split-gear springs introduces immediate mechanical backlash, causing the servomechanism to break into violent hunting oscillations upon power-up.

Warning

Inverted Rate Feedback Polarity Hazard (Positive Feedback Runaway): When replacing or re-pinning a tachogenerator wiring harness on an autopilot servo, technicians must strictly verify signal polarity. If the tachometer feedback wires are inadvertently reversed, the velocity signal is added to rather than subtracted from the position error. The rate feedback transforms into powerful positive feedback : any minor motor movement induces runaway acceleration, driving the servomotor into destructive full-speed runaway oscillation or violent mechanical stops. A post-maintenance servo functional polarity check is mandatory under EASA Part-66.

  • Worked Engineering Calculations
  • Calculation 1: Second-Order Servo Natural Frequency and Rate Feedback Gain

An aircraft pitch trim servomechanism possesses the following parameters:

  • Equivalent moment of inertia: J = 0.025 kg ⋅ m 2 J = 0.025\text{ kg}\cdot\text{m}^2 J = 0.025 kg ⋅ m 2
  • Motor torque constant: K m = 2.50 N ⋅ m/V K_m = 2.50\text{ N}\cdot\text{m/V} K m ​ = 2.50 N ⋅ m/V
  • Position feedback transducer sensitivity: K p = 10.0 V/rad K_p = 10.0\text{ V/rad} K p ​ = 10.0 V/rad

Inherent mechanical viscous friction: B = 0.050 N ⋅ m ⋅ s/rad B = 0.050\text{ N}\cdot\text{m}\cdot\text{s/rad} B = 0.050 N ⋅ m ⋅ s/rad

Step 1: Calculate the Undamped Natural Frequency ( ω n \omega_n ω n ​ )

The total forward position stiffness is: K p o s = K p × K m = 10.0 V/rad × 2.50 N ⋅ m/V = 25.0 N ⋅ m/rad K_{pos} = K_p \times K_m = 10.0\text{ V/rad} \times 2.50\text{ N}\cdot\text{m/V} = 25.0\text{ N}\cdot\text{m/rad} K p os ​ = K p ​ × K m ​ = 10.0 V/rad × 2.50 N ⋅ m/V = 25.0 N ⋅ m/rad ω n = K p o s J = 25.0 N ⋅ m/rad 0.025 kg ⋅ m 2 = 1000 ≈ 31.62 rad/s \omega_n = \sqrt{\frac{K_{pos}}{J}} = \sqrt{\frac{25.0\text{ N}\cdot\text{m/rad}}{0.025\text{ kg}\cdot\text{m}^2}} = \sqrt{1000} \approx 31.62\text{ rad/s} ω n ​ = J K p os ​ ​ ​ = 0.025 kg ⋅ m 2 25.0 N ⋅ m/rad ​ ​ = 1000 ​ ≈ 31.62 rad/s

Step 2: Compute Unassisted Inherent Damping Ratio ( ζ 0 \zeta_0 ζ 0 ​ )

The unassisted system characteristic equation is J s 2 + B s + K p o s = 0 J s^2 + B s + K_{pos} = 0 J s 2 + B s + K p os ​ = 0 , where 2 ζ 0 ω n = B / J 2\zeta_0 \omega_n = B / J 2 ζ 0 ​ ω n ​ = B / J : ζ 0 = B 2 J ω n = 0.050 2 × 0.025 × 31.62 = 0.050 1.581 ≈ 0.0316 \zeta_0 = \frac{B}{2 J \omega_n} = \frac{0.050}{2 \times 0.025 \times 31.62} = \frac{0.050}{1.581} \approx 0.0316 ζ 0 ​ = 2 J ω n ​ B ​ = 2 × 0.025 × 31.62 0.050 ​ = 1.581 0.050 ​ ≈ 0.0316

Assessment: The unassisted damping ratio is a minuscule ζ 0 ≈ 0.032 \zeta_0 \approx 0.032 ζ 0 ​ ≈ 0.032 . The system is severely underdamped and will exhibit violent, sustained hunting oscillations in response to any flight command.

Step 3: Determine Required Tachometer Feedback Gain ( K t K_t K t ​ ) for Optimal Damping ( ζ = 0.707 \zeta = 0.707 ζ = 0.707 )

With tachometer rate feedback, the effective viscous damping coefficient becomes: B e f f = B + K m K t B_{eff} = B + K_m K_t B e ff ​ = B + K m ​ K t ​

We mandate an optimal aerospace damping ratio ζ = 0.707 \zeta = 0.707 ζ = 0.707 : 2 ζ ω n = B e f f J ⟹ B e f f = 2 × ζ × ω n × J 2 \zeta \omega_n = \frac{B_{eff}}{J} \implies B_{eff} = 2 \times \zeta \times \omega_n \times J 2 ζ ω n ​ = J B e ff ​ ​ ⟹ B e ff ​ = 2 × ζ × ω n ​ × J B e f f = 2 × 0.707 × 31.6228 rad/s × 0.025 kg ⋅ m 2 = 1.1177 N ⋅ m ⋅ s/rad B_{eff} = 2 \times 0.707 \times 31.6228\text{ rad/s} \times 0.025\text{ kg}\cdot\text{m}^2 = 1.1177\text{ N}\cdot\text{m}\cdot\text{s/rad} B e ff ​ = 2 × 0.707 × 31.6228 rad/s × 0.025 kg ⋅ m 2 = 1.1177 N ⋅ m ⋅ s/rad

Step 4: Solve for the Tachogenerator Gain Constant ( K t K_t K t ​ ) K m K t = B e f f − B = 1.1177 − 0.050 = 1.0677 N ⋅ m ⋅ s/rad K_m K_t = B_{eff} - B = 1.1177 - 0.050 = 1.0677\text{ N}\cdot\text{m}\cdot\text{s/rad} K m ​ K t ​ = B e ff ​ − B = 1.1177 − 0.050 = 1.0677 N ⋅ m ⋅ s/rad K t = 1.0677 N ⋅ m ⋅ s/rad K m = 1.0677 2.50 N ⋅ m/V ≈ 0.4271 V ⋅ s/rad K_t = \frac{1.0677\text{ N}\cdot\text{m}\cdot\text{s/rad}}{K_m} = \frac{1.0677}{2.50\text{ N}\cdot\text{m/V}} \approx 0.4271\text{ V}\cdot\text{s/rad} K t ​ = K m ​ 1.0677 N ⋅ m ⋅ s/rad ​ = 2.50 N ⋅ m/V 1.0677 ​ ≈ 0.4271 V ⋅ s/rad

To convert K t K_t K t ​ into common engineering units of mV / RPM \text{mV / RPM} mV / RPM : ω = 1 RPM = 2 π 60 rad/s ≈ 0.10472 rad/s \omega = 1\text{ RPM} = \frac{2\pi}{60}\text{ rad/s} \approx 0.10472\text{ rad/s} ω = 1 RPM = 60 2 π ​ rad/s ≈ 0.10472 rad/s K t = 0.4271 V/(rad/s) × 0.10472 (rad/s)/RPM = 0.04473 V/RPM = 44.73 mV / RPM K_t = 0.4271\text{ V/(rad/s)} \times 0.10472\text{ (rad/s)/RPM} = 0.04473\text{ V/RPM} = 44.73\text{ mV / RPM} K t ​ = 0.4271 V/(rad/s) × 0.10472 (rad/s)/RPM = 0.04473 V/RPM = 44.73 mV / RPM

Technical Result: Configuring the tachometer feedback network to deliver 44.73 mV / RPM 44.73\text{ mV / RPM} 44.73 mV / RPM increases the damping ratio from a hunting-prone 0.032 0.032 0.032 to the ideal stable aerospace standard of 0.707 0.707 0.707 , eliminating all overshoot without sacrificing steady-state motor power.

Loading diagram... Tachogenerator Velocity Feedback Damping Architecture