Study guide

5.3 Universal Gates and Aircraft Combinational Applications

EASA Part-66 Module 05 — Digital Techniques / Electronic Instrument Systems Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Numbering Systems

1.1 Numbering Systems: Decimal, Binary, Octal and Hexadecimal 1.2 Binary Arithmetic and Signed Number Representation 1.3 Binary Coded Decimal, Gray Code and Alphanumeric Codes

2 Chapter 2: Data Conversion

2.1 Analogue and Digital Signals, Sampling and Quantisation 2.2 Digital-to-Analogue Converters 2.3 Analogue-to-Digital Converters

3 Chapter 3: ARINC 429 Data Buses

3.1 ARINC 429 Specification, Physical Layer and Topology 3.2 ARINC 429 32-Bit Word Architecture 3.3 ARINC 429 Transmission, Timing and Troubleshooting

4 Chapter 4: Advanced Avionics Data Buses and Aircraft Ethernet

4.1 ARINC 629 Digital Autonomous Terminal Access 4.2 MIL-STD-1553B Military Avionics Data Bus 4.3 AFDX / ARINC 664 Part 7 Avionics Full-Duplex Switched Ethernet

5 Chapter 5: Combinational Logic Gates and Boolean Algebra

5.1 Basic Logic Gates, Truth Tables and Logic Levels 5.2 Boolean Algebra, De Morgan Theorems and Logic Simplification 5.3 Universal Gates and Aircraft Combinational Applications

6 Chapter 6: Sequential Logic, Registers and Logic Diagrams

6.1 Bistable Multivibrators: SR, JK, D and T Flip-Flops 6.2 Shift Registers and Data Storage Elements 6.3 Asynchronous and Synchronous Counters and Logic-Diagram Interpretation

7 Chapter 7: Computer Structure and Microprocessors

7.1 Computer Architecture, Terminology and the Bus System 7.2 Semiconductor Memory Technologies 7.3 Microprocessor Operation, Instruction Cycles and I/O

8 Chapter 8: Integrated Circuits, Multiplexing and Integrated Modular Avionics

8.1 Integrated Circuit Technology, Encoders, Decoders and Scale of Integration 8.2 Multiplexing and Demultiplexing Techniques 8.3 Remote Data Concentrators and Integrated Modular Avionics

9 Chapter 9: Fibre Optics in Aviation

9.1 Physics of Light Transmission and Optical Fibres 9.2 Fibre Cable Types, Signal Degradation and Optical Components 9.3 Fibre Optic Maintenance, Termination, Splicing and Inspection

10 Chapter 10: Electronic Displays and Flight Instrument Layout

10.1 Display Technologies: CRT, LED and LCD 10.2 Electronic Flight Instrument System Architecture 10.3 Cockpit Symbology, Colour Standards and Display Reversion

11 Chapter 11: Electrostatic Sensitive Devices

11.1 Physics of Electrostatic Charge and Device Susceptibility 11.2 ESDS Damage Mechanisms: Catastrophic versus Latent Failures 11.3 ESDS Handling, Storage, Packaging and Workshop Procedures

12 Chapter 12: Software Management Control and Airworthiness

12.1 Aviation Software Classification and RTCA DO-178C / EUROCAE ED-12C 12.2 Software Configuration Management and Part Numbering 12.3 Data Loading, Integrity Verification and Unapproved Changes

13 Chapter 13: Electromagnetic Environment

13.1 Electromagnetic Interference and Compatibility 13.2 High Intensity Radiated Fields and RF Hazards 13.3 Lightning Protection, Bonding and Static Dischargers

14 Chapter 14: Engine Indication, Warning and Monitoring Systems

14.1 Airbus ECAM — Electronic Centralised Aircraft Monitoring 14.2 Boeing EICAS — Engine Indicating and Crew Alerting System 14.3 Comparison, Failure Reversion and Sensor Interfacing

15 Chapter 15: Flight Management, Navigation and Surveillance Systems

15.1 Flight Management System and Control Display Unit 15.2 Inertial Reference, AHRS/ADIRU Context and GPS 15.3 Traffic Collision Avoidance and Terrain Awareness

16 Chapter 16: Fly-By-Wire, BITE, ACARS, Cabin and Information Systems

16.1 Fly-By-Wire Flight Control 16.2 Built-In Test Equipment and Central Maintenance Computers 16.3 ACARS, Cabin Systems and Information Systems

5.3 Universal Gates and Aircraft Combinational Applications

Key Takeaways Explain This Topic AI

NAND and NOR are universal gates: each family alone can implement NOT, AND and OR, and therefore any combinational Boolean function.

A two-input NAND becomes an inverter when both inputs are tied together, or when the unused input is tied HIGH so a single logic level is inverted.

A landing-gear down-and-locked indication that requires every leg locked is an AND of the individual down-and-locked discretes.

A warning or master-caution lamp that must light if any one of several faults is true is an OR of those fault discretes.

NAND followed by a second NAND used as an inverter is AND, a common equivalent circuit when a schematic is stocked with NAND packages only.

Last updated: September 2026

5.3 Universal Gates and Aircraft Combinational Applications

The former detailed Appendix I description for 5.5(a) paired identification with applications used for aircraft systems and schematic diagrams ; the current consolidated text uses the shorter “Identification and applications” wording. The networks in this section remain combinational : the output at any instant depends only on the present inputs. Discrete interlocks, gear-down-and-locked coincidence, and warning-lamp summation are AND and OR functions, often built from NAND or NOR packages because those two gates are universal .

A gate family is universal if, using only members of that family, you can realise NOT, AND and OR. Any Boolean expression then follows by substitution. NAND is universal. NOR is universal. AND alone is not (it cannot invert). OR alone is not. XOR alone is not. ExamFinch treats these constructions as independent Module 5 study; they are not an EASA-approved wiring standard for a named aeroplane type.

NAND as a universal gate

NOT from NAND. Tie both inputs of a two-input NAND together, or drive both pins from the same net. The truth table collapses: input 0 gives NAND(0,0) = 1; input 1 gives NAND(1,1) = 0. That is inversion. An equivalent shop practice on a multi-input NAND is to tie unused inputs HIGH and use one remaining input as the signal; NAND with one input HIGH is an inverter on the other input, because 1 · A is A and the NAND then complements it. Do not leave a CMOS input open: a float is not a defined 1. Do not tie both inputs permanently to 0 V and expect inversion — the output then sits stuck HIGH.

AND from NAND. AND is NAND followed by inversion. Two NAND packages: the first computes (A·B)′; the second, wired as a NOT, complements that result back to A·B. On a schematic this often appears as two NAND symbols in series, the second with its inputs joined. It is still combinational AND, not a latch.

OR from NAND. De Morgan: A + B = (A′ · B′)′. Invert each input with a NAND-wired NOT, then NAND those inverted signals together. The final NAND is the OR. In distinctive-shape language this is the NAND equivalent of OR with inverted inputs, which Section 5.2 already identified as the dual of NAND.

  • Required function NAND-only construction
  • NOT Both NAND inputs tied to the signal (or unused input tied HIGH)
  • AND NAND, then a second NAND used as NOT
  • OR NOT each input, then NAND the inverted inputs
  • NAND A single NAND
  • NOR OR construction, then an extra NAND as NOT
  • NOR as a universal gate

NOT from NOR. Tie both inputs together: NOR(0,0) = 1, NOR(1,1) = 0. Unused NOR inputs are tied LOW so they do not force the output to 0.

OR from NOR. OR is NOR followed by inversion: two NOR packages, the second used as NOT.

AND from NOR. De Morgan: A · B = (A′ + B′)′. Invert each input with a NOR-wired NOT, then NOR those inverted signals. That NOR of inverted inputs is AND.

Avionics discrete cards often stock one universal type in quantity (commonly NAND in TTL-era teaching, sometimes NOR in CMOS packs) so that every combinational function on the board uses the same package. Mixed AND, OR and NOT symbols on a functional schematic may therefore appear as walls of NAND on the circuit schematic. They are equivalent if De Morgan and the extra inverters are drawn correctly.

Discrete interlock

An interlock is a combinational enable: an actuator, valve, starter or test function is allowed only when every safety condition is present and no inhibit is present. In Boolean form:

Y = (condition1) · (condition2) · … · (inhibit)′

That is AND of the required discretes, with active-low inhibits inverted so that a true inhibit forces Y to 0. Examples used in training include: enable a hydraulic pump only when fire-handle not pulled AND oil pressure sane; enable a thrust-reverser test only when weight-on-wheels AND reverse not already unlocked. The maintenance point is the coincidence : one false required input, or one asserted inhibit, must drop Y. That is AND behaviour, not OR.

If the inhibit arrives already active-low (bar over the name), the AND input that receives it may be drawn without an extra inverter — the active-low pin is the inversion. Adding a second inverter by mistake would AND with the released inhibit and defeat the interlock. Read the bar before you add a bubble.

Landing gear down-and-locked: AND

A green gear-down indication that is allowed only when every leg is down and locked is the textbook aircraft AND:

Y_green = (nose down-and-locked) · (left main down-and-locked) · (right main down-and-locked)

Three proximity or landing-gear-control-unit discretes. Y is 1 only for the single combination in which all three asserted-true inputs are 1. Any one unlocked leg forces Y to 0, which is the fail-safe sense for a “all down and locked” lamp. XOR would light green when an odd number of legs reported locked — useless as an interlock. Inclusive OR would light green if a single leg locked — unsafe as an “all locked” caption. NOR would light when all three reports were 0 (all unlocked).

Active-low proximity switches. Many installations pull a discrete LOW when the target is near (locked). The asserted-true down-and-locked state is then 0 on the wire. The coincidence of three asserted-low signals is electrically NOR of the raw lines (output HIGH only when every raw line is LOW), or AND after each line is inverted . Those two drawings are De Morgan equivalents. On the schematic, look for bubbles on the AND inputs or a NOR symbol feeding the green lamp driver. Do not “correct” NOR to AND without moving the inversions; you would invert the meaning of locked.

A red gear-unsafe or disagreement lamp is a different function: it is often driven when the handle and the proximity set do not match, which is closer to XOR or to an OR of disagreement bits. This chapter’s required identification is the down-and-locked AND (or its NOR equivalent with active-low inputs), not the sequential gear-position sequencer.

Warning lamp: OR of faults

A master caution or a shared warning lamp that must illuminate if any one of several independent fault discretes is true is inclusive OR:

Y_lamp = F1 + F2 + F3 + … + Fn

The lamp is 0 only when every fault input is 0. AND would require every fault to be present at once before the crew saw a light. XNOR would light when faults matched, including the all-healthy case if that pattern were “all zeros matching”. A binary counter that tallies faults over time is sequential and is not the 5.5(a) combinational lamp.

Active-low fault discretes (open-collector, asserted LOW) are often wired-OR on a single pull-up: any transistor pulling the node LOW asserts the bus. That wired node is electrically equivalent to AND of active-high “healthy” lines, or to OR of active-low “fault” lines — another De Morgan pair. The functional schematic still shows OR of faults feeding the caution driver.

Schematic reading recipe

Name each net as asserted-high or asserted-low from the bar or bubble.

Identify the IEC mark or distinctive shape, then apply bubbles: & with output circle is NAND; ≥1 with output circle is NOR; & with input circles is NOR.

If the card is all NAND or all NOR, rebuild AND and OR with the universal constructions above. NAND then NAND-as-NOT is AND. That pair driving a lamp is the landing-gear coincidence, not an exclusive-OR and not a toggle flip-flop.

Translate back to the aircraft sentence: all conditions → AND; any condition → OR; not → inversion on that pin only.

Confirm combinational behaviour: changing an input now must be able to change the output now, with no clock edge required.

Worked schematic. Two down-and-locked discretes A and B, active-high, feed a NAND whose output goes to a second NAND used as an inverter, and that inverter drives a green LED. First NAND produces (A·B)′. Second NAND as NOT produces ((A·B)′)′ = A·B. The lamp is AND. Replacing the second NAND with a direct connection would leave the lamp driven by NAND, so the LED would be dark only when both legs were locked — the opposite of the required indication.

Level 2 means you can walk that chain on a wiring diagram, state the Boolean function at the lamp, and choose AND for all-locked coincidence and OR for any-fault warning without reaching for sequential symbols.

Loading diagram... Aircraft combinational applications: gear AND interlock and warning OR, built from universal NAND or NOR